Transcript
DA-CM1100 INSTALLATION MANUAL This manual is intended for users of the DA-CM1100 ceiling mounting bracket. It includes instructions for mounting the DA-CM1100 ceiling mounting bracket to a ceiling. • This bracket is intended to be used with DC-D series model of camera. Do not use it with other models of cameras. • This installation should be performed by a qualified service personnel in conformance to all local codes. • You may need to reinforce the ceiling. If the ceiling is not strong enough to support the camera, the camera may fall. • Do not use this product for other purposes.
Mounting Mount the bracket to the ceiling as follows:
1
Insert cables from external devices, network and power adapter through the hole of bracket.
2
Mount bracket to the ceiling by using the anchors and screws. Bracket
3
Screw the plate to bracket by using the screws.
Bracket
Plate
Connect your camera to the bracket as follows:
4 5
Screw the camera bottom cover onto the plate.
6
Turn on power.
Plate
Connect the camera dome cover onto the camera bottom cover.
Camera Bottom Cover
Camera Dome Cover
Dimensions Unit: mm (inch) 341 (13.43)
59 (2.32)
45.5 (1.79)
38 (1.50)
3- 10.5 (0.41)
120 (4.72)
20.5 (0.81) 5 (0.20)
83.5 (3.28)
46 (1.81)
4-M3
IDIS Co., Ltd. For more information, please visit www.idisglobal.com
Ver.1.0
