Transcript
DA-PM1100 INSTALLATION MANUAL This manual is intended for users of the DA-PM1100 parapet mounting bracket. It includes instructions for mounting the DA-PM1100 parapet mounting bracket to a parapet. • This bracket is intended to be used with DC-S series model of cameras. Do not use it with other models of cameras. • This installation should be performed by a qualified service personnel in conformance to all local codes. • You may need to reinforce the parapet. If the parapet is not strong enough to support the camera, the camera may fall. • Do not use this product for other purposes.
Mounting Mount the bracket to the parapet as follows:
1 2
Mount the bracket to the parapet. Insert cables from external devices, network and power adapter into bracket and route it through the pipe.
Pipe
Cable
Bracket
Connect your camera to the bracket as follows:
3
Connect the camera to the pipe by turning the universal nut.
Do not turn the camera but turn the universal nut when connecting the camera to the pipe, otherwise, the cable will be twisted.
4
Turn on power.
Pipe
Universal Nut
Camera
Dimensions Unit: mm (inch) 628 (24.72)
910 (35.83) 150 (5.91)
450 (17.72)
1006 (39.61)
310 (12.2)
628 (24.72)
Ø1
1 (0
1 (0
.43
150 (5.91) 60 (2.36) 60 (2.36)
)
120 (4.72) 150 (5.91)
.43
)
380 (14.96) 40 150 (5.91) 150 (5.91) (1.57) 150 (5.91) 115 (4.53)
Ø1
70 (2.76) 40 (1.57)
IDIS Co., Ltd. For more information, please visit www.idisglobal.com
240 (9.45) 300 (11.81)
Ver.1.0
