2014 Electronic Products Catalogue

Transcript

301856 COVER ART.indd 1 10/01/14 12:14 PM Electronics 2014 Inside cover.pdf 1 19/12/2013 4:30:16 PM 301856 COVER ART.indd 2 10/01/14 12:14 PM CONTENTS 3 3 WELLER ® Soldering stations Stands & accessories Repair & rework stations Fume extraction Soldering tips WELLER 23-7 28-13 14-16 17-22 23-32 33 33 EREM ® High precision tweezers Cutters Pliers Pre forming tools Fibre optic tools XCELITE EREM 33-35 36-37 38 38 38 ® Knives Blades Allen sets PC repair tools and kits For Xcelite® refer to current Apex Tool Group Hand Tools Price List for listing of products available 301856 INSIDE PAGES.indd 1 10/01/14 12:15 PM TERMS & CONDITIONS OF SALE The prices shown are recommended and exclusive of G.S.T. Net prices can be derived by applying your appropriate discount, unless otherwise authorised by Apex Tool Group Pty. Limited, Albury NSW and are subject to change without notice. All orders are subject to acceptance by the factory in Albury. Orders are accepted only on the basis of prices ruling on the date of shipment, unless otherwise agreed. Product Returns Credit Claim Postal or freight charges via our specified carrier both to the factory and on return will be for the account of Apex Tool Group. Claims for shortages, breakages, etc., must be made within 14 days on receipt of goods. All orders will be shipped CPT Carriage Paid to destination, or as negotiated. Small Order Charge For orders of less than $100.00 excluding GST an order processing charge of $10.00 + GST will apply. Back orders and spare parts are exempt from this condition. Finish We reserve the right to furnish, without notice, whatever finish is available regardless of catalogue descriptions. Trading Terms Payment received within 30 days of the last day of the month in which the invoice was raised. Cash Discounts 2% for Payment by cheque or E.F.T. (exluding credit card) received within 10 days of the last day of the month in which the invoice was raised. Minimum Annual Spend To maintain an account with Apex Tool Group Pty. Limited, a minimum annual spend of $5,000 excluding GST, is required each year. Should sales fall below this amount in any one calendar year, you will be given the opportunity to discuss your situation with Apex Tool Group and to increase your sales over the following 6 month period. Should this not occur, your account will be closed at Apex’s discretion. Rebates All rebates are dependent on the recipients account being conducted as per our Terms and Conditions. Freight Chargeable freight to the customer will be prepaid and charged on our invoice. 2 All returns of Apex Tool Group products should be to the factory, via our specified carrier. Apex Tool Group Pty. Limited 519 Nurigong Street Albury NSW 2640 Goods Returned Under Warranty Goods Returned for Repair Postal or freight charges to the factory will be for customers account and return charges will be for account of Apex Tool Group. Goods Returned for Credit Any Apex Tool Group product may only be returned with written permission of Apex Tool Group Albury. All products must be new, of current design and in a resaleable condition. Credit will then be issued at the original purchase price, less a 15% handling service fee. Apex Tool Group Pty. Limited A.B.N. 50 002 965 826 PO Box 366, 519 Nurigong Street Albury NSW 2640 Australia (02) 6058 0300, 6021 5511, Fax 6021 7403 Sales (02) 6021 6666 Stock Adjustment Policy All requests to return merchandise must be approved by Apex Tool Group. An offsetting order of equivalent value must accompany the request for stock adjustment. An offsetting order must be for standard price listed items at current prices and standard terms (no promotions, specials, dating orders, contract items or merchandisers). Proof of purchase must be established on all items. Apex Tool Group will not accept the return of a product as part of a stock adjustment return which was not originally purchased from Apex Tool Group. The price shown on the Request for Return must coincide with the price list in effect at the time of original supply. The inclusion of a copy of the original Apex Tool Group invoice on which the item was shipped, will expedite the processing of the adjustment. Inventory adjustments will be credited at the actual cost paid by the distributor as determined by proof of purchase, going back one year. A 15% handling service fee will be assessed. After authorisation is received, all returns must be shipped to the Albury factory, freight prepaid. All returned products must have been purchased within the last 6 months prior to return and be of current design and finish, in current production, and must be in a re-saleable condition upon receipt at the Albury factory. Any returned products which are not in a re-saleable condition will not be accepted and the distributor will be notified for disposition. Returns will not be allowed for special made to order items. Individually packed items must be in the original factory-sealed package when returned. Limited Lifetime Guarantee Apex Tool Group quality products are guaranteed against any defect in material or workmanship. Damage caused by abuse, improper use or excessive wear is not covered by this warranty. This Warranty is provided in addition to other rights and remedies you have under law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Claims should be returned, with proof of purchase, to the place of purchase or returned prepaid to the address below. Repaired or replacement goods will be returned at our cost. Apex Tool Group Pty Limited 519 Nurigong Street, Albury NSW 2640, AuSTRALIA Ph: (02) 60580300 [email protected] www.apextoolgroup.com.au Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 2 10/01/14 12:15 PM 301856 INSIDE PAGES.indd 3 10/01/14 12:15 PM Electronically Controlled Stations Weller Description WES51D An economical soldering station with high-End Performance. Ideal for continuous production soldering. • Analogue temperature control • Temperature lockout • Automatic shut off • Slim comfortable pencil - reduced operator fatigue • Temperature range 150°C-450°C • Max. power output 50W • Assembled in Australia Soldering station consists of: • WES51DPU 230V Power Unit • PES51 50 Watt 24V Pencil • PH50 Holder • ETA tip • Soldering Tips - ET Series available WESD51DAU Ideal for production, rework and repair of through hole SMT boards, some ground planes and multi-layer boards. • Digital microprocessor temperature control with LED display • Wireless temperature lockout tool • Automatic shut off • Tip temperature offset • °C-°F switchable • Temperature range 150°C-450°C • Max. power output 50W • Assembled in Australia Soldering station consists of: • WESD51DPU 230V Power Unit • PES51 50 Watt 24V Pencil • PH50 Holder • ETA tip • Soldering Tips - ET Series available WD1000AU A new concept in soldering iron design. • Digital temperature control • Temperature lockout • Automatic shut off • Unique miniature pencil • 3 Pre-set temperature buttons • °C-°F switchable • Temperature range 50°C-450°C • Max. power output 80W • Made in Germany Soldering station consists of: • WD1 230V Power Unit • WP80 80 Watt 24V Pencil • WDH10 Holder • LTB tip • ROHS & WEEE Compliant WD1AU Power unit only WD1000TAU Soldering Station with Stop Go Stand 4 Material No. Shelf Pack WES51D 10 WESD51DAU 10 WD1000AU 1 ESD SAFE WD1AU 1 WD1000TAU 1 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 4 10/01/14 12:15 PM Electronically Controlled Stations (cont’d) REINSTATED PRODUCT Material No. Shelf Pack WD1000MAU Micro Digital Rework Soldering Station, • Designed for fine pitch, high density SMT soldering and rework • 3 “radio buttons” allows pre-set of frequently used temp settings • Setback, lockout, temp. window, F/C switching, standby, auto-off time • Large high contrast LCD display displays more information at a glance • The heating element is contained in the tip for fast heat-up • WMRP Pencil weighs just 75g • The pencil powers down when placed in the holder to extend tip life • The “tip to grip” distance is 45mm, placing you close to the work • The antistatic design of the safety rest has got four different settings • ESD safe to protect sensitive components • ROHS & WEEE Compliant • Max. Power Output 150W; Consists of WMRP 40W Micro Soldering Pencils with RT3 Tip and WDH50 Holder WD1000MAU 1 WD1000HPT The WD 1000hPT station features Weller’s new 120 W soldering iron, the WP 120. This iron is ideal for soldering on difficult circuit boards with heat sinks that cause dissipation in heat transfer. Target applications include high density circuit boards, High Frequency / Radio Frequency applications, and solar panel production. The Weller WD1000hPT station is specifically designed for soldering operations which need a combination of high energy and maximum precision. The WD1000 hPT consists of• The WD120 Soldering Iron XT Series Tips, refer page 29 • The WD1M Power Unit • WDH10T Stop + Go Iron Safety Rest • Power: 160W WD1000HPTAU WD1MAU Power unit only WD2000MAU Dual Micro Digital Rework Station • Use WMRP solder pencil and WMRT desoldering tweezers simultaneously • Designed for fine pitch, high density SMT soldering and rework • 3 “radio buttons” allows pre-set of frequently used temp settings • Setback, lockout, temp. window, F/C switching, standby, auto-off time • Large high contrast LCD display displays more information at a glance • The “tip to grip” distance of the WMRP pencil is just 45mm • WMRT tweezers utilize a tip cartridge that is always in alignment • Tools are automatically switched off when placed in the stands • ESD safe to protect sensitive components • ROHS & WEEE Compliant • Max. Power Output 160W; RoHS & WEEE Compliant; Consists of WMRP 40W Micro Soldering Pencil with RT3 Tip and WDH50 Holder, WMRT 80W Micro Desoldering Tweezers with RTW2 Tip and WMRTH Holder WD2MAU Power unit only ESD SAFE 1 ESD SAFE WD1MAU 1 WD2000MAU 1 ESD SAFE WD2MAU Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 5 Weller PRODUCT Description 1 5 10/01/14 12:15 PM Weller Electronically Controlled Stations (cont’d) Description Material No. Shelf Pack WSD151 Extremely high output soldering station delivering 150 watts • Digital microprocessor temperature control with LED display • Automatic shut off • Calibration box (WCB1 or WCB2) may be connected • °C-°F switchable • Temperature range 50°C-550°C • Max. power output 150W • ROHS & WEEE Compliant • Made in Germany Soldering station consists of • PUD151 230V Power Unit • WSP150 150 Watt 24V Pencil • KH27 Holder • LHT-F tip T0053277599 1 WX1010 Soldering Station • WX1 Power Unit • WXP120 soldering tool (120 watt) with XTB tip • WDH10 safety rest with dry tip cleaner ESD SAFE WX1010AU 1 ESD SAFE WX1 Power Unit only • 200 Watt rated output • Robust Touch screen display • Automatic energy saving mode • Multi purpose USB port • Benchtop Controller capability WX1011 Soldering Station • WX1 Power Unit • WXMP micro soldering tool (40 watt) with RT3 tip • WDH50 safety rest with dry tip cleaner WX1AU 1 ESD SAFE WX1011AU 1 ESD SAFE WX1012 Soldering Station • WX1 Power Unit • WXP65 soldering tool (65 watt) with XNT A tip • WDH10 safety rest with dry tip cleaner WX1012AU 1 ESD SAFE WX2020 Soldering Station • WX2 Power Unit • 2 x WXP120 soldering tool (120 watt) with XTB tips • 2 x WDH10 safety rest with dry tip cleaner WX2020AU 1 ESD SAFE View video & brochure on WX Product Range at Website www.weller.de 6 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 6 10/01/14 12:15 PM Electronically Controlled Stations (cont’d) Material No. Shelf Pack WX2021 Soldering Station • WX2 Power Unit • WXMP micro soldering tool (40 watt) with RT3 tip • WDH50 safety rest with dry tip cleaner • WXMT micro soldering tweezers (2 x 40 watt) with RTW2 tip • WDH60 safety rest with dry tip cleaner WX2021AU 1 WX2 Power Unit only • 240 Watt rated output • Robust Touch screen display • Automatic energy saving mode • Multi purpose USB port • Benchtop Controller capability WXD2010 Soldering Station • WXD2 Power Unit • WXDP120 desoldering iron • WDH70 safety rest Weller Description ESD SAFE WX2AU 1 ESD SAFE WXD2010AU 1 ESD SAFE WXD2020 Soldering Station • WXD2 Power Unit • WXDP120 desoldering iron with WDh70 safety rest • WXP120 soldering iron with WDh10 safety rest WXD2 Control Unit • 230V Power Unit • Power consumption 200 Watt • Channels 2 • Interface • ESD safe • Backlighting graphic display • Connectable tools: all WX tools are connectable The digitally controlled 2-channel soldering and desoldering station WXD2 was designed for professional repair work on state-of-the-art electronic assemblies in the industrial manufacturing, repair and laboratory sectors. WXD2020AU 1 ESD SAFE WXD2AU 1 ESD SAFE View video & brochure on WX Product Range at Website www.weller.de Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 7 7 10/01/14 12:15 PM Tool Selection Chart     WST82  WSB150 WSB80  HAP200  HAP1  DSX120  DSX80 WHPS80 DS80UNC  WTA50 WSD151 WMRT  WMRP   WP200 WP80   WSP150 WP65   WP120 WSP80   PES51    WTCPTD PRS50  WSL WTCPT TC201B WSD81 Station TC201 Weller Tools  WES50D  WES51D  WESD51D  WSD161    WMRS    WD1000AU    WD1000MAU    WD2000MAU    WD1AU     WD1MAU         WMD1     WMD3      WR3M    WR2                                                  WD2MAU                                         Soldering Tools Material No. Shelf Pack PES51 1 WP65 Soldering Set Consists of: • WP65 tool with XNTA tip + WDH10 support • Excellent heat transfer producing very rapid thermal response • Slim barrel and short tip - grip (32mm) makes it ideal for precision soldering on smt boards • Heat up time approx. 7s. 50°C to 380°C • Compatible with all stations from 80W (except WX) T0052921699 1 WP65 65 Watt Soldering Tool only T0052921599 1 WP80 80 Watt Soldering Set • Compatible with WD1 and WD2 Soldering Stations, and WR Rework Stations • WP80 offers 80 watts of power with short tip-to-grip (40 mm) • Perfect for Lead Free solder • ESD safe • ROHS & WEEE Compliant • See page 18 for LT tips, Accessories and Spares Consists of: • WP80 soldering pencil • WDH10 support • See page 18 for LT Tips T0052918199 1 WP80 Tool only WP80 Barrel for WP80 Pencil T0052918099 1 Description PES51 50 watt soldering iron to suit WES51D and WESD51D See page 17 for ET tips Ph50 Stand not included Refer Hand Tools Price List 8 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 8 10/01/14 12:15 PM Soldering Tools (cont’d) Material No. Shelf Pack WP120 Soldering Set • Powerful heating element with a replaceable soldering tip • The rapid transfer of heat into the soldering tip is quickly and precisely controlled with sophisticated electronics • Design copes with big and difficult solder joints even at barely accessible places • Also ideal for HF shield plates or solar panel manufacturing • ROHS & WEEE Compliant Consists of: • WP120 soldering pencil • WDH10T Stop + Go Stand • See page 17 for XT tips T0052919499 1 WP120 Tool only T0052919399 1 WSP150 Soldering Set 150 watt soldering pencil for heavy duty work • ROHS & WEEE Compliant See page 20 for LhT tips Consists of: • WSP150 Soldering Tool • WDH30 Stand T0052918999 1 WSP150 Tool only T0052917099 1 WP200 Soldering Set 150 watt soldering pencil for heavy duty work • ROHS & WEEE Compliant See page 20 for LhT tips Consists of: • WSP150 Soldering Tool • WDH30 Stand T0052920099 1 WP200 Tool only T0052919999 1 DSX80 Desoldering Set 80 Watt Desoldering Pencil • Temperature range 50°C-450°C • RPHS & WEEE Compliant See page 24 for DX tips Consists of: • DSX80 Desoldering Tool • WDH30 Stand T0051318399 1 DSX80 Tool only T0051319099 1 DSX120 Desoldering Tool Temperature range 50°C - 450°C Power output 120W Heat-up time 35 sec. (50-380°C) Tip type XDS Series Connectable to WR2 and WR3M T0051319899 1 Weller PRODUCT Description PRODUCT Desoldering Tools Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 9 9 10/01/14 12:15 PM Weller Desoldering Tools (cont’d) Description Material No. Shelf Pack WTA-50 SET The WTA-50 tweezers can be used with all Weller Temtronic/SL series stations. Dual heating elements with independent temperature sensors provide the tips with constant temperature. Temperature range 150°C - 450°C Output 2 x 25W Consists of: • Desolder Tweezer • AK51 Support • Hex Key Supplied with WT1 tip See page 21 for WT tips • ROHS & WEEE Compliant T0053313399 1 WTA50 Tool only T0051317199 1 HAP1 SET 100 Watt HAP1 Hot Air Pencil & WDH30 Stand. For both soldering and desoldering of SMD’s. Temperature range 50°C - 550°C Power absorption 100W Consists of: • HAP1 hot air pencil • WDH30 Safety Rest • 1.2mm nozzle • Xcelite Nutdriver P8 MM See page 25 for nozzles • ROHS & WEEE Compliant T0052711899 1 HAP1 Tool only T0052711599 1 HAP200 SET Hot Air Pencil set 200W, 24V The hAP200 provides a directional hot air flow that is adjustable. Electronic temperature control from 50°C to 550°C. Different nozzles available as accessory. Finger switch controls the adjustable pump. For WR 3M only. T0052711799 1 HAP200 Hot Air Pencil T0052711699 1 HAP200 Nozzle Adapter See page 25 for Nozzles T0058761728 1 WMRP Micro Soldering Set Soldering pencil for RT soldering tips • ROHS & WEEE Compliant • 40 watt Micro Soldering Pencil Set with high speed regulation See page 20 for RT tips Consists of: • WMRP Tool • WDH50 Stand T0052919099 1 WMRP Tool only T0052917199 1 WMRT Micro Desoldering Tweezers with rest for WMRS, WD 1M, WD 2M The new WMRT desoldering tweezers enables with its twin parallel adjusted tiplets a significant precise de- and soldering of very small SMD components. The high speed regulation of the stations WMRS, WD 1M, WD 2M drives this tweezers. Placed in the rest WMRTH the tips are automatically switched off for increasing endurance. • ROHS & WEEE Compliant T0051317399 1 WMRT Tool only T0051317499 1 Hot Air Tools PRODUCT PRODUCT Micro Tools PRODUCT 10 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 10 10/01/14 12:15 PM WX Tools Material No. Shelf Pack WXP65 Soldering Set • 65 Watt soldering tool with XNTA tip • Very fast response for precision soldering • Very fast response for precision soldering • WDH10 safety rest with dry tip clearner T0052921299 1 WXP65 Soldering Tool T0052921199 1 WXP120 Soldering Set • 24 volt, 120 Watt soldering tool with XTB tip • For soldering large components with high heat demands • WDH10 safety rest with dry tip cleaner T0052920299 1 WXP120 Tool only • 24 volt, 120 Watt soldering tool with XTB tip • For soldering large components with high heat demands T0052920199 1 WXP200 Soldering Set • 24 volt, 200 Watt soldering tool with XHTD tip • For soldering very large components or ground planes • WDH31 safety rest with dry tip cleaner T0052920699 1 WXP200 Tool only T0052920599 1 WXMP Soldering Set • 24 volt, 40 Watt micro soldering tool with RT3 tip • Extremely rapid response, ideal for working under a microscope • WDH50 safety rest with drip tip cleaner T0052920499 1 WXMP Tool only T0052920399 1 WXMT Tweezer Set • 24 volt, 2 x 40 Watt micro soldering tweezer with RTW2 tip • Extremely rapid response, ideal for desoldering small SMD parts • WDH60 safety rest with dry tip cleaner T0051317899 1 WXMT Tool only (Non tip cartridge) T0051317799 1 WXDP120 Desoldering Set • Temperature range 50°C - 450°C • Power consumption 120 W • Heat-up time 35 sec. (50°C - 350°C) • Desoldering tips XDS Series Consists of: • WXDP120 Desoldering Tool • WDH70 Stand T0051320299 1 WXDP120 Tool only T0051320199 1 WHP200 Infrared under Board heater The new WhP200 from Weller is a new under board heater which although small in dimensions is very powerful. The WhP200 is designed to be used on small multipayer PCBs to minimise the risk of thermal damage to boards and to speed up the repair process. • Universal application • Fast and efficient heating • Operating simplicity • Excellent Price-/Performance ratio • Voltage: 230 V / 50/60 Hz • Power: Heat Zone 200 W Medium Wave Infrared • Safety Class: I • Regulation: 50°C - 400°C T0053371599 1 WRK Rework Nozzle Kit The newly developed, innovative desoldering system facilitates soldering and desoldering of large SMT components up to 30 x 30 mm. The desoldering system can be connected to the additional vacuum channel (pick up) of the WR 3M. • 8 Nozzles • Assorted Vacuum Cups • 2 Vacuum Rods and Hose • Stand T0051515599 1 Weller PRODUCT Description PRODUCT PRODUCT PRODUCT Optional Accessories Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 11 11 10/01/14 12:15 PM ACCESSORIES Soldering Pencils, Magnastat temperature controlled, low voltage Material No. Shelf Pack TC201B TCP50M TC201 1 1 1 W60D W100D T0056107599 1 1 1 PH1201 Tool Stand for TCP, TC, EC and SP *For pricing refer to Hand Tools Price List PH1201 1 PH50 Tool Stand for PES50 and PES51 *For pricing refer to Hand Tools Price List PH50 1 PH1260 W60D Tool Stand *For pricing refer to Hand Tools Price List PH1260 1 PH12100 W100D Tool Stand *For pricing refer to Hand Tools Price List PH12100 1 WDH10 Support for WSP80 & WP80 with four different settings T0051512199 1 WDH10T WP80 Stop-And-Go Stand T0051516199 1 WDH30T Stop-And-Go Support T0051516399 1 Weller Description *TC201B Magnastat Tool suits WTCPTD 42W 24V *TCP50M Magnastat Tool 40W 50V *TC201 Magnastat Tool suits WTCPS/T 40W 25V *For pricing refer to Hand Tools Price List Soldering Pencils, temperature controlled, line voltage *W60D Magnastat Tool *W100D Magnastat Tool *W201D Magnastat Tool 60W 100W 200W See pages 24 & 25 for Tips *For pricing refer to Hand Tools Price List W100D Tool Stands PH50, PH12100 PH1201, PH1260 WDH10 WDH10T WDH30T Tool Stands Chart TCP TC201/B EC1201 PES50 PES51 WSP80 WSP150 WP80 WP120 WMP WMRP WTA-50 HAP1 HAP200 DS80UNC DSX80 W60D W100D 12 AK51 PH12100 PH1260 WDH10T WDH50 WDH30 WDH20 WDH10 PH50 Tools PH1201 STANDS                      Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 12 10/01/14 12:15 PM Soldering Aids Material No. Shelf Pack ESF-120ESD Printed circuit board holder • Adjustable to Eurocard size • Suitable for holding irregular shaped cards • Component support T0051502699 1 Sponge 2 Layers - Pack of 5 70X55X16MM T0052242099 1 WPB1 1 WDC2 Dry Cleaner Attachment T0051512599 1 WDC Wire Wool 2 Refills T0051382499 1 T0053124699 1 WPA2 1 WSTA3 Soldering, hot blow and torch flame facilities.kit includes: • 1 x soldering tip • 1 x hot blow tip • torch ejector tightening bar • Metal Kit box See page 32 for tip selection *For pricing refer to Hand Tools Price List WSTA3 1 WSTA6 Junior pocket size with auto ignition • Fitted with pocket clip • Suitable for soldering and hot blow applications • 1 x WPT-01 tip See page 31 for tip selection *For pricing refer to Hand Tools Price List WSTA6 1 WSTA5 Jumbo, (self igniting) Kit includes: • Soldering Tip 72-01-02 • Hot Blow Tip 72-01-52 • Metal kit box See page 31 for tip selection *For pricing refer to Hand Tools Price List WSTA5 1 WPB1 Polishing Bar • Rejuvenates tips without damage to the plated surface WDC Weller Description WDC2 Electronic Temperature Measuring Equipment WTT1 Temperature measurement and calibration. • Measures temperature without imposing thermal load. The WTT1 digital temperature measuring system has been specifically designed for measuring the temperature of soldering iron tips. The probe has a double sensor system and internal heat source. The measured temperature is fed to a control system that records the flow of heat in the probe and stabilizes it with the aid of the internal heat source. This design ensures that no heat is drawn by the probe from the object being measured. Erroneous measurements due to the large thermal load of the probe are thus prevented. The measured temperature is indicated on a three-digit LED display to a resolution of 1°C. An adjustable preheat temperature ensures a rapid response even at high temperatures. Weller® Pyropen WPA2 Piezo ignition (self) lighting. Kit includes: • 1 x WPT-2 soldering tip • 1 x WHC-52 hot blow tip • Metal kit box See page 32 for tip selection *For pricing refer to Hand Tools Price List Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 13 13 10/01/14 12:15 PM Repair/Rework Stations Weller Description WR2 Rework Station • 300 Watt rated output • Two channel simultaneous operation • Internal air and vacuum supply • Will drive regular Weller tools up to 200 watts • Will not drive micro tools or XT tools • DH10 safety rest with dry tip cleaner Material No. Shelf Pack WR2AU 1 ESD SAFE View brochure & video at website: www.weller.de WR2000A Hot Air Station • WR2 Rework station • HAP1 Hot air tool with 3.0mm nozzle • WDH30 Safety rest with dry tip cleaner WR2000AAU 1 ESD SAFE WR2000D Desoldering Station • WR2 Rework station • DSX80 Desoldering tool with DSX113HM tip • WDH30 Safety rest with dry tip cleaner WR2000DAU 1 ESD SAFE WR2002 Rework Station • WR2 Rework station • WP80 Soldering tool with LTB tip • WDH10 Safety rest with dry tip cleaner • DSX80 Desoldering tool with DSX113HM tip • WDH30 Safety rest with dry tip cleaner 14 WR2002AU 1 ESD SAFE Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 14 10/01/14 12:15 PM Repair/Rework Stations Material No. Shelf Pack WR3M Package includes: • WR 3M repair station • Adapter for HAP200 hot-air pencil • CD with USB software • USB cable Technical data: • Dimensions L x W x H (mm): 237 x 235 x 102 • Weight: approx. 6.7 kg • Mains supply voltage: 230 V, 50 Hz (120 V, 60 Hz) • Power consumption: 420 W • Safety class: I and III, housing antistatic • Fuse: Overcurrent release 2 A (4 A) • Temperature control Soldering and Desoldering iron stepless of channels: 50°C-550°C • Controllable temperature range is tool-dependent • Temperature accuracy: ± 9°C • Temperature stability: ± 2°C • Pump (periodic duty (30/30) s): Max. vacuum 0.7 bar • Max. delivery rate 18 l/min • Hot air max. 15 l/min • Additional Pump: Max. vacuum 0.5 bar • Max. delivery rate 1.7 l/min • Equipotential bonding: Via 3.5 mm pawl socket on back of device T0053366699 1 WR3000MAU Rework Set Package includes: • WR3M • HAP200 Hot-air pencil with WDH30 Safety rest • DSX80 Desoldering iron with WDH30 Safety rest • WP80 Soldering iron with WDH10 Stop + go Safety rest • WVP Vacuum pick up • WDC2 Dry cleaner Technical data: • Dimensions: L x W x H (mm): 237 x 235 x 102 • Weight: approx. 6.7 kg • Mains supply voltage: 230 V, 50 Hz (120 V, 60 Hz) • Power consumption: 420 W • Safety class: I and III, housing antistatic • Fuse: Overcurrent release 2 A (4 A) • Temperature control Soldering and Desoldering iron stepless of channels: 50°C-550°C • Controllable temperature range is tool-dependent • Temperature accuracy: ± 9°C • Temperature stability: ± 2°C • Pump (periodic duty (30/30) s): Max. vacuum 0.7 bar • Max. delivery rate 18 l/min • Hot air max. 15 l/min • Additional Pump: Max. vacuum 0.5 bar • Max. delivery rate 1.7 l/min • Equipotential bonding: Via 3.5 mm pawl socket on back of device WR3000MAU WHA900 hot air station 700W with built-in turbine Low cost hot air station for less complex repair tasks and hot air applications suck as shrinking. The in-built turbine provides hot air and variable temperatures. The temperature of the hot air is electronically controlled. • Analogue temperature adjustment • Temperature range 50°C-550°C • Air Volume 5-50 l/min (ESD Safe) • Two rotary potentiometers to set air temperature and air volume • Standby and calibration function • Safety Class I • ROHS & WEEE Compliant T0053171699 Weller View video & brochure at website: www.weller.de Description ESD SAFE 1 ESD SAFE Hot Air Station ESD SAFE Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 15 1 15 10/01/14 12:15 PM Weller Repair/Rework BGA/QFP Stations The new WQB Repair System upgrades the Weller product range in the SMD repair tool sector. A well thought-out design concept combines reliability and maximum process control with ease of use and technically mature detail solutions. useful accessories increase the possible uses of this repair work station. On the WQB 3000 the temperature-regulated 2-zone infrared bottom heater provides rapid warm up and homogeneous substrate temperatures. The hot gas top heater, with digital control electronics for temperature monitoring and regulation of the air flow rate, facilitates the finely metered supply of heat to the components. A temperature sensor placed directly in the hot gas nozzle efficiently regulates the top heater and thus provides maximum process control. Large chip removal station with high energy handpiece. Extensive assortment of economically priced nozzles, with custom sizes made to order. Maximum precision. Maximum flexibility. Maximum user-friendliness. Description Weller’s next-generation repair and rework station combines a completely new design with state-of-the-art split optic camera technology to provide users with absolute reliability, optimum process control and enhanced ease of use. Advanced design for enhanced precision The WQB 4000SOPS is modularly built with a slide platform, advanced patented systems and materials of the highest quality to guarantee industrial reliability and long-lasting durability. bilities ome increaues to lead -friendly t enable ncreasingly . t Optic generation system, eptional ework tools alue for your Heating from above: selective and sensitive The hot gas heater with patented nozzle system, coupled with digital control elecIt is a comprehensive, system tronics for user-friendly temperature monitoring and for the removal and soldering of BGA regulation of risk theofairthermal flow rate, facilitates components, without the metered supply of heat to the damage tothe thefinely component or circuit board. components. A temperature sensor placed directly in the hot gas nozzle prevents thermal overload of the component and efficiently regulates the top heater, providing maximum process control. Split Optics for perfectly accurate 16 Note: Some of the above positioning The new SOPS (Split Optic Positioning System) with the high-resolution 2 Mpix CMOS USB 2.0 camera enables accurate the components follow301856positioning INSIDEofPAGES.indd 16 ing desoldering. It works with a single Material No. Shelf Pack T0053370699 1 WQB4000SOPS Weller’s next-generation repair and rework station combines a completely new design with state-of-the-art split optic camera technology to provide users with absolute reliability, optimum process control and enhanced ease of use. • Advanced design for enhanced precision Thewas WQB4000SOPS is modularly built with a slide platform, The system engineered to bring patented systems and materials of the highest quality to togetheradvanced a finely tuned balance of autoguarantee industrial reliability and long-lasting durability. mated technology for component pick-up • Heating from above: selective and sensitive and positioning semi-automated The hotwith gas aheater with patented nozzle system, coupled with rework cycle – opening up new possibilidigital control electronics for temperature monitoring and regulation of the air flow the finely metered supply of heat to ties and applications in rate, repairfacilitates and rework. the components. A temperature sensor placed directly in the hot gas nozzle prevents thermal overload of the component and Well considered detail, high-precision efficiently regulates the top heater, providing maximum process results and an outstanding price-perforcontrol. mance ratio promise make this new • Heating fromtobelow: rapid and homogeneous The Weller temperature-regulated two-zone infrared bottom heater system from the first choice among provides discerning users. rapid, yet precisely controlled warm-up at homogeneous substrate temperatures. • Streamlined technology The new WQB4000SOPS enables users to work with a standard PC via a uSB 2.0 port. Additional appliances or interface cards are not required. Technical Data • Monitoring software: comprehensive functions Dimensions (L x W x h): The monitoring software determines temperature profiles and approx. 630 x 630 x 650 mm facilitates definition of the optimal soldering process. Dynamic dimensions: • Teach-in feature: fast, effective parameter identification Repeatable results can only be achieved by a process cycle that approx. 1030 x 630 x 650 mm considers all the parameters of the repair operation. The ‘Teach-in’ Power supply voltage: 230V, 50/60 Hz feature provides a quick and easy method of determining process Mains fuse: T10A cycle parameters and identifying critical points - without the need Power: 2300W for in-depth operator knowledge. The software includes a library of Top heater: 700W soldering profiles, i.e. general and specific parameters enabling Bottom heater: repeatable use. New profiles can be edited easily by the user and large 1600W (260 x 260) mm added to the library. • Perfect component/circuit board alignment small 400W (120 x 120) mm With the split optic camera, live images of a component and a Compressed-air supply: circuit board can be aligned independently of each other using the 400-600 kPa purified, dry compressed air x, y and theta axis fine adjustment drives. Compressed-air converter: 1. Component size & theta axis vacuum 60 kPa 2. Align y axis Temperature control: 3. Align x axis infinitely variable 50°C - 400°C 4. Component aligned! control precision ± 10°C • Removal (desoldering) of the defective component The ability to preheat the circuit board and a temperature/time Flow control: controlled process are critical for good reflow of the solder joints. infinitely variable 5-50 l/min. At the end of the reflow cycle, to avoid damage to the solder pads, Air consumption: 60-100 l/min. (4 bar) a vacuum lift automatically removes the component from the board Total weight: approx. 40kg with minimum force and exact temperature control. • Cleaning of the circuit board Residual solder should be removed from the board with a desoldering iron or desolder wick. Residual contaminants can be removed with a suitable solvent spray. • Positioning of the new component The new WQB4000SOPS station’s split optic camera placement system ensures precise positioning of a wide range of components - from BGA to fine pitch SMT. • Component soldering Reflow of the replaced component is essentially a repeat of the removal process, without the vacuum lift being initiated at the end of the profile. An extensive range of hot gas nozzles and adapters are available to cater for the many body sizes of BGA devices or QFP and PLCC packages. Optimized ease of use Heating• from below: profiling Temperature Everything about the WQB 4000SOPS rapid andAnhomogeneous eight-step temperature profile enables soldering andnew cooling that are perfectly tailored to specific has requirements. been engineered and designed for The temperature-regulated two-zone Split Optics for perfectly ease of use and superb results – from its infrared •bottom heater provides rapid,accurate positioning Thecontrolled new SOPS (SplitatOptic Positioning System) with the highadvanced, user-friendly software all the way yet precisely warm-up resolution 2 Mpix CMOS USB 2.0 camera enables accurate through to its manyItsupportive details, such homogeneous substrate temperatures. positioning of the components following desoldering. works with as the feature. a single camera and two-colour lighting forSoftStart exact positioning. Superb image quality at high dynamics and very low image noise ensure precise, ergonomic component mounting. • An ever expanding field of applications The new WQB4000SOPS is optimally equipped to take on repair and rework in mobile communications, research and general BGA. QFP work. Specifically, with PBGA, CBGS, CCGA, CSP’s, Micro BGA, QFN, PLCC, SOP and PGA components. 1. Components without direct access to the solder joint 2. Leaded components with external solder joints 3. A wide variety of special modules. View brochure at website: www.weller.de items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 10/01/14 12:15 PM Fume Extraction Zero-Smog® System Zero-Smog® System In many countries legal regulations governing clean air in the work place require that hazardous substances are removed from the air in order to avoid harmful effects on people and machines. Weller Many work environments today, including soldering, adhesives, welding and laser applications, create particles and gases that can be harmful to the work place and the environment. Most people thought that the move to lead-free soldering would be more nature friendly. In reality leadfree soldering smoke emissions contain more breathable fine dust particles. More and smaller particles are produced due to the higher working temperatures required and because more flux is used in the soldering process. It is important to use the correct safety equipment to remove these hazardous substances. Fine particles are more dangerous to inhale than big particles as they get caught more easily and block the alveoli in the lungs. Weller Zero-Smog Systems offer two solutions®for fume ® Weller Zero-Smog Systems extraction: offer two solutions for fume Systems offer two solutions for fume extraction: extraction: ® separate these particles ® To protect the operator it is important to use an extraction system that is able to and gases and then re-circulates the cleaned air back into the work place. This saves energy and reduces energy costs. Weller® Zero-Smog® Tip Extraction Tip Extraction Tip Extraction Tip Extraction Tip E Weller® FE (Fume Extraction) soldering irons have a smoke tube integrated into the handle. When soldering the tube is positioned directly above the joint and collects any fumes produced. Fume extraction attachments can be retro fitted to non fume extraction Weller® soldering irons. Well Tip have Whe Well abov have ced. Whe fitted abov irons ced. fitte Le irons Co Up Le w Co Er Up w w No Er M w N M • Less investment per work place • Collect pollution direct at source • Up to 20 collection points with one system (200 m apart) • Ergonomic friendly with easy access to work place • No noise • Minimal air movement For brochure and product information refer to website: www.weller.de Volume Extraction Volume Extraction Volu Volume Extraction Volume Extraction Mor Volu exam sold Mor mob exam max sold mob La max Lo M La Qu Lo Ec M Re Q Ec Re More suitable for applications involving, for example, solder baths, hot air soldering, micro solders and gluing work. Weller® offers various mobile systems that purify the air at up to a maximum of 8 workplaces. • • • • • • Larger areas can be covered Low maintenance Mobile Quick & easy installation Economic for 1 to 8 work places Remote control Note: Some of the above items may require a freight lead time. Product depictions are not to scale.  Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 17  17 10/01/14 12:15 PM Filter Technology Weller Filter Technology Filter Technology Weller® Zero-Smog® Systems are specifically ® ® ®Systems are specifically Weller Weller®Zero-Smog Zero-Smog Systems areinspecifically designed for continuous operation industrial designed for continuous operation in industrial designed for continuous operationatinthe industrial environments. Care and attention design environments. Care and attention at the environments. Care and attention at the design stage plus careful component choice and a design stage plus careful component choice stage plus careful component choice and given a high manufacturing process have and aquality high quality manufacturing process ® ® ® Zero-Smog Weller Systems are specifically ® systems high given quality manufacturing havea given Weller extraction aprocess world wide extraction systems world have Weller ® for continuous operation in industrial designed wide reputation for systems reliability and longevity. Weller extraction world wide reputation for reliability andalongevity. Filter Technology environments. and attention at the design reputation for Care reliability and longevity. ® ® havea athree three Weller ®Zero-Smog ® Systemschoice stage careful component and a Zero-Smog Systems have Wellerplus stage filter system for removing ® high quality manufacturing process given Zero-Smog Systems havesmall ahave three Weller stage filter system® for removing small particles, ® fumes and gases that are produced Weller extraction a world wide stage filter system for removing fumes andsystems gases that aresmall produced inparticles, different working processes: reputation for reliability andthat longevity. particles, fumes and processes: gases are produced in different working in different working processes: Weller® Zero-Smog® Systems have a three particle size:system for removing small stage filter particle fumes size: and gases that are produced particles, µm e.g. viruses processes: in 0,5 different working 0,5 µm 5 µm 1. The hazardous substances are efficiently 1. The hazardous substances areefficiently 1. captured The hazardous by thesubstances nozzle andare are absorbed efficiently captured by the nozzle and captured by the nozzle and are absorbed into the filter. are absorbed into the filter. into theparticles filter. get . Bigger 2. Bigger particles get caught caughtin inthe theprepre. filter Bigger particles caughtget in the pre-in and smaller particles caught filter and smallerget particles get caught 1. The hazardous substances are efficiently filter and smaller particles getParticulate caughtAir) in the HEPA (High Efficiency Particulate in the HEPA (High Efficiency captured the Efficiency nozzle andParticulate are absorbed Air) filter.by the HEPA (High Air) filter. 3. The Wide BandGas GasFilter Filterremoves removes the filter. filter. . into The Wide Band fumes and adhesives. . Bigger particles get caught in the pre. fumes The Wide Gas Filter removes andBand adhesives. filter particles get caught in fumesand andsmaller adhesives. 5 µm 100 µm 10 µm 100 µm Endfilter. product – clean air – is re-circulated into the workplace. . Wide Band Gas Filter removes theThe workplace. fumes and adhesives. e.g. bacteria, pigments e.g. fog, hair e.g. fibres, pollen e.g. fog, hair F7 H12 H13 F5 F7 H12 H13 Filter Class: Filter Class F5,e.g. F7:fog, Finehair dust filter as per EN 779 100 µm Filter Class F5, F7: Fine dust filter as per EN 779 F5, F7: Fine dust filterENas1822 per 779(High Filter Filter Class According HEPA Efficiency Filter ClassH12/H13: H12/H13: According ENEN 1822 HEPA (High Particulate EfficiencyAir) Particulate Air) Filter Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter F5 F7 H12 H13 Filter Class: Filter Process Filter Process Filter Class F5, F7: Fine dust filter as per EN 779 WFE, WFE P WFE, WFE P Filter Process .+. .+.WFE P WFE, .+. 1. 1. 1. filter drawings not true to original filter drawings not true to original filter drawings not true to original 18 H12 / H13 F7 filter for clean rooms 1000 – 100 for applications with high 1000 – 100 flux content H12 / H13 filter for clean rooms 1000 – 100 90 100 80 90 70 80 medium filtration efficiency Em % 60 against particle size 0,12 µm: 70 50 60 100 40 50 90 30 40 80 20 30 70 10 20 60 10 50 Filter Class: F5 F7 40 Filter Class: F5 F7 30 20 10 Filter Class: WFE X WFE X WFE 0D, WFE S, 0D, WFE8S, S, WFE S, WFE S, WFE WFE ES, WFE8S, CS WFE ES, WFE CS WFE X WFE 0D, WFE S, 1. S, WFE 8S, WFE 1. ES, WFE CS WFE Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter Filter Process for applications with high for applications with high flux content Recommended Application flux content for filterstandard for cleanapplications rooms medium filtration efficiency Em % e.g. viruses F5 F7 F7 Filter Class FH12 5 / H13 against 0,12 µm:Em % mediumparticle filtration efficiency End product – clean air – is re-circulated intosize against particle size 0,12 µm: 100 the workplace. e.g. viruses e.g. bacteria, pigments Filter Class: Recommended Application Recommended Application for standard applications for standard applications End product – clean air – is re-circulated into HEPA–(High Particulate Endthe product clean Efficiency air – is re-circulated intoAir) the workplace. 5 µm e.g. bacteria, pigments 10 µm size: e.g. fibres, pollen particle 10 µm e.g. fibres, pollen 0,5 µm Filter Class FFilter 5 Class F5 . or . . or . 1. . or . . or . . or . . or . F5 H12 H13 H12 H13 1. Fine dust filter F7 H12 For standard withH13 a small amount of flux 1. Fine dustapplications filter ® and pollutionapplications gases with high content, Weller For standard withsolid a small amount of flux offers filter classes or F7. and pollution gasesF with high solid content, Weller® offers filter classes F or F7. 1. Fine dust filter . Compact filter consisting with of: a small amount For standard applications 1. Fine dust filter HEPA filter . Compact filter consisting of: high solid of flux and pollution gases For standard applications with awith small amount of flux Filters particles up®tooffers 0,3 μm. Weller offers HEPA HEPA filter filter classes or(High F7. content, Weller ® and pollution gases with high solid content,F5 Weller Efficiency Particulate of class H1HEPA and (High H1, Filters particles up to Air) 0,3 filters μm. Weller offers offers filter classes F or F7. medium filtration efficiency 99,5of%class /of: 99,95 Efficiency Particulate Air) filters H1%. and H1, 2. Compact filter consisting medium filtration efficiency 99,5 % / 99,95 %. HEPA filter . Compact filter consisting of: Wide gas filter Filtersband particles up to 0.3 µm. Weller offers HEPA filter For cleaning harmful fumesParticulate and vapours.Air) The Weller Wide band gas filter hEPA (high filters Filters particles Efficiency up to 0,3 μm. Weller offers HEPA (High wide bandH12 gas filter of 0 % active For cleaning harmful fumesmedium and vapours. The carbon Weller of class and consists H13, Efficiency Particulate Air) filters of classfiltration H1 and H1, and 0 % Puratex. Harmful gases with a high molewide band gas filter /consists of 0 % active carbon efficiency 99.5% 99.95%. medium filtration efficiency 99,5 % / 99,95 %. cular weight are cleaned by the active carbon. and 0 % Puratex. Harmful gases with a highPuratex moleis suitable forare absorbing gases lowercarbon. molecular cular weight cleaned by theofactive Puratex Wide band gas filter Wide band gas filter weight. Because of its composition, Puratex is able is suitable for absorbing gases of and lower molecular For cleaning harmful fumes vapours. For cleaning harmful fumes and vapours. The Weller to convert a large of chemical pollutants by weight. Because ofnumber its composition, Puratex is able The Weller gas filter wide band gaswide filter band consists of 0 % consists active carbon means of active molecular modification into non-polluting to convert a largecarbon number of chemical pollutants by of 50% and 50% Puratex. and 0 % Puratex. Harmful gases with a high molegases. means of molecular modification into non-polluting harmful gases with aby high molecular weight cular weight are cleaned the active carbon. Puratex gases. are cleaned by the active carbon. Puratex is suitable for absorbing gases of lower molecular . filterfor (option) is Gas suitable gasesPuratex of lower weight. Because absorbing of its composition, is able The gasfilter filterweight. is used for extracting fumes . Gas (option) molecular Because of adhesive its pollutants composition, to convert a large number of chemical by and solvents. Experience has shown that filtering The gas filter is used for extracting adhesive fumesof Puratex is able to convert a large number means of molecular modification into non-polluting suspended particles is not so vital inof this respect. and solvents. Experience shown that filtering chemical pollutants byhas means molecular gases. The gas filter is into fillednon-polluting % active suspended particles iswith not 0 so vital ingases. thiscarbon respect.and modification 0 Puratex. and H13 iscarbon omitted. The%gas filter is The filledHEPA withH12 0 % active and . Gas filter (option)  0 % Puratex. The HEPA H12 and H13 is omitted. 3. Gas filter The gas filter is (option) used for extracting adhesive fumes  The gas filter is used for extracting adhesive and solvents. Experience has shown that filtering fumes and solvents. has shown suspended particles is notExperience so vital in this respect. thatgas filtering not so The filter issuspended filled with 0particles % active is carbon and vital this respect. The filled with 0 % in Puratex. The HEPA H12gas andfilter H13 isisomitted. 50% active carbon and 50% Puratex. The  hEPA h12 and h13 is omitted. Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 18 10/01/14 12:15 PM Sound level < 39 db (A) at 1 m distance Portable unit for stand alone applications ain filter system. A compressed Maximum vacuum 20.000 Pa er removes additional odours Operating pressure 3,5 - 6 bar ompressed air. This highly 30 l/min ystem makes the WFE a genuine Air consumption tem. The filter-lift system allows Height 200 mm (7.8 in) nient filter cartridge replaceDiameter 140 mm (5.5 in) ume Extraction) soldering irons HEPA filter 2,7 kg / 5.9H13 lb directly to the unit – additional Weight and quired. wide band gas filter Compressed air cleaning filter Compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Fine dust filter F7 Order No. 0V 005 36 402 99 Order No. 10V WFE WFE P Attributes Solder Fume electrically Extractingdriven Unit Small, portable, fume extraction unit tion unit eaning filter 005 36 402 99 WFE Attributes E P is a line voltage fume Up to  FE soldering irons can be designed to run with one or two connected ction) soldering irons. The WFE P Electric vacuum pump to produce the long-life, soundproofed vacuum required vacuum ce the required vacuum – it does  power stages for higher extraction pressed air supply. The vacuum perfomance with  FE soldering irons safe applications low sound level power settings which can be sePortable unit for standESD alone s of rocker switches depending of FE soldering irons connected saves energy. The motor is Technical Data ee and has a thermal over load Maximum capacity 2 FE soldering irons nit. The filter lift system allows HEPA Sound level < 45filter db (A)H13 at 1 m distance nient main filter replacement. and 230 V / 50 Hz ns are connected directly to unit Operating voltage wide band gas filter ads are not required. Power input 70 W Tip Extraction The Weller® WFE P is a line voltage fume Up to  FE soldering irons can be Description Material No. Shelf extraction unit designed to run with one or two connected Pack FE (Fume Extraction) soldering irons. The WFE P Electric vacuum pump to produce the T0053639599 WFEP2 1 has an electric, long-life,® soundproofed vacuum required vacuum The Weller WFE P2 is a line voltage fume extraction unit pump to produce the required vacuum it FE does  power stages for higher extraction designed to run with one or – two (Fume Extraction) soldering irons. The WFE has an electric, long-life, not need a compressed air supply. TheP2vacuum perfomance with  FE soldering irons vacuum pump required unit for stand alone applications pump has twosoundproofed power settings which cantobeproduce se- thePortable vacuum - it does not need a compressed air supply. The lected by means of rocker depending vacuum pumpswitches has two power settings which can be on the number of FE soldering connected selected by means irons of rocker switches depending on the number FE soldering irons is connected to the unit. This to the unit. This savesofenergy. The motor saves energy. The motor is maintenance-free and has a maintenance-free and has a thermal over thermal over load to protect theload unit. The filter lift system to protect theallows unit. The lift systemmain allows fast filter and convenient filter replacement. FE HEPA filter H13 soldering ironsfilter are connected directly to unit - additional fast and convenient main replacement. and leads are not required. FE soldering irons are connected directly to unit • Up to 2 FE soldering irons can be wide band gas filter – additional leads are not required. connected • Electric vacuum pump to produce the required vacuum • 2 power stages for higher extraction performance with 2 FE soldering irons Scope of supply • Portable unit for stand alone applications. Scope of WFE P Fume extraction unitsupply includes: Compact filter • WFE P Fume extraction unit • Compact Consists of: HEPA filter H13,filter wide band gas filter Consists of: hEPA filter h13, wide band (50smoke % activeabsorption carbon, 50 % tube Puratex) The is integrated into Fine dust filter F7gas filter (50% active carbon, the handle. It can placed over the joint 50%be Puratex) • Fine F7 Ordersoldering No. 0V 36 386 99 when when butdust canfilter be005retracted Technical Data: Order to No.the 10V WFE2P and can also be access joint is a problem Maximum capacity 2 FE soldering irons removed for cleaning. The irons areattemperaSound level <45 db (A) 1m distance Operating voltage ture controlled, ergonomic and230V/50Hz allow precise Power input 70W handling. These electronically controlled irons Maximum vacuum 30.000 Pa height 295mm (11.6in) Diameter 140mm (5.5in) Weight 4kg/8.8lb FE (Fume Extraction) Soldering Irons Maximum vacuum 30.000 Pa Height 295 mm (11.6 in) Diameter 140 mm (5.5 in) Weight action unit filter H13, wide band gas filter on, 50 % Puratex) 005 36 386 99 WFE2P 0 4 kg / 8.8 lb Fine dust pre-filter F7 Tip Extraction Weller Fine dust pre-filter F7 filter H13, wide band gas filter on, 50 % Puratex) Fine dust pre-filter F7 Fine dust pre-filter F7 can be driven from any Weller® power unit compatible with the rating of the iron or any Weller® rework station. The range of iron power ratings and the extensive range of solder tips mean that there is an iron to suit all applications. The FE soldering irons are supplied with a burn proof hose 5 mm (0.19 in) diameter, 2,5 m (98.42 in) long. ESD safe Order No. FE (Fume Extraction) Soldering Irons005 33 150 99 FE (Fume Extraction) Soldering Irons Description FE 50 Soldering iron set 50 W / 24 V, with safety rest KH 20*. Not available in US. Description Material No. Shelf Pack The smoke absorption tube isinto integrated into handle.from any Weller® power unit can the be driven The smoke absorption tube is integrated 005 32 152 99 FEplaced 50M Soldering 50 W / 24 V, Magnastat controlled with safety rest KH 20*. It can be over the iron jointset when soldering but can be the handle. It retracted can be placed over the joint compatible with the rating of the iron or any access to the joint is a problem and can Notwhen available in US. ® Weller when soldering but be retracted when rework station. The range of iron power also becan removed for cleaning. The irons are temperature ergonomic and allow These access to the controlled, joint is a problem and can alsoprecise be handling. ratings and the extensive range of solder tips electronically controlled irons can be driven from any removed for cleaning. The irons are temperamean thatiron there is an iron to suit all applica® Weller power unit compatible with the rating of the 005 33 151 99 FE 75 Soldering iron set 80 W / 24 V with safety rest KH 20*. tions. FE soldering irons are supplied with a ture controlled, and allow precise station. The range of iron The power or ergonomic any Weller® rework For use with LT tips.range of solder tips mean that ratings and the extensive burn proof hose 5 mm (0.19 in) diameter, 2,5 m handling. These electronically controlled irons there is an iron to suit all applications. The FE soldering (98.42 in) long. irons are supplied with a burn proof hose 5mm (0.19 in) diameter, 2.5m (98.42 in) long. 005 26 162 99 FE Attachments FE 80 Soldering iron 80 W / 24 V with safety rest KH 20*. Not available in US. FE ATTACHMENTS ESD safe A range of FE attachments are available to fit standard Weller® soldering and desoldering irons to convert fume extraction versions. The attachments Order No. them toDescription supplied with allextraction necessary fittings and hoses. * Cleaning brushare for FE tubes and fume included theThe scope of supply of the soldering irons 005 33 150 99 FE 50 Soldering iron setfunnels 50 W are /if24 V, affected. withinsafety performance of the retro-fitted tools not Forrest KH 20*. for use with KHWeller 20 and®KH 23 safety rests. soldering irons WP120, WP80, WSP80, WMP, Not available in US. MLR21 or soldering irons with handle diameter 10-13mm (0.39-0.51 in). Clip will be fixed with an silicone O-ring to the soldering iron. 005 32 152 99 FE 50M Soldering iron set 50 W / 24 V, Magnastat controlled with safety rest KH 20*. Gedruckt durch: Martinu am: 4.6.2007 T0052918699 Attachment withavailable for WP120, A range of FEFE attachments are to fit ForWSP80, Weller® soldering irons WP 120, WP 80, 1 Not available intube, US. 6.0mm ® WP80, MLR21, and MLR80, WMP standard Weller soldering desoldering WSP 80, WMP, MLR 21 or soldering irons with irons to convert them to fume handle diameter 10 –13 mm (0.39 – 0.51 in). FE Attachment withextraction tube, 4.5mm for WP120, WMRP and versions. The99WSP80, attachments are supplied all/ 24 for Clip will be fixed withT0052918599 an silicone O-ring to the MLR21, MLR80, WMP finesafety soldering 1 005 33 151 FEWP80, 75 Soldering iron setwith 80 W V with rest KH 20*. applications necessary fittings and performance soldering iron. For hoses. use withThe LT tips. of the retro-fitted tools is not affected. Order 005 26 No. 162 99 005 29 186 99 Description FE 80 Soldering iron 80 W / 24 V with safety rest KH 20*. FE Attachment Not available in US.with tube, ø 6 mm (0.23 in) for WP 120, WSP 80, WP 80, MLR 21, MLR 80, WMP. Note: Some of the above items may require a freight lead time. Product depictions scale. Broken shelf 5% (0.17 Surcharge. herein do notand include 19 005 29 185 99are notFEto Attachment withpacks tube, attract ø 4,5 amm in) forPrices WP 120, WMRP WSPGST. 80, WP 80, MLR 21, MLR 80, WMP for fine soldering applications. * Cleaning brush for FE tubes and fume extraction funnels are included in the scope of supply of the soldering irons 005 448 FE23Spare for FE attachment, tube ø 4,5 mm (0.17 in). 301856 INSIDE PAGES.indd 19 10/01/14 12:15 PM for use87 with KH75 20 and KH safety Clip-Set rests. WFE Attributes Small, portable, compressed air driven fume extraction unit Weller Weller® WFE2X The fume extraction unit WFE requires clean and oil-free compressed air. The vacuum is generated by a maintenance-free compressed air converter. The contaminated air is purified by a Description pre-filter and main filter system. A compressed air cleaning filter removes additional odours WFE2X KIT 1 causedfume by the compressed air. This highly Mobile extraction kit Includes: efficient filter system makes the WFE a genuine •air 2Xrecovery Fume extraction system.unit The filter-lift system allows 100-240V / 50/60Hz fast and convenient filterextraction cartridge replace• KIT 1 WF60 Sloped stativ arm for volume extraction consistssoldering of: ment. The FE (Fume Extraction) irons Funnel nozzle directly to the unit – additional connected are Stop valve leads not required. Benchare mounting bracket Up to  FE soldering irons can be connected Maintenance-free compressed air converter Material No. Shelf Portable unit for stand alone Pack applications WFE2XKIT1AU HEPA filter H13 and wide band gas filter Extraction hose ESD safe 1 low sound level Scope of supply Technical Data Maximum capacity 2 FE soldering irons Sound level < 39 db (A) at 1 m distance Maximum vacuum 20.000 Pa Volume Extraction Operating pressure 3,5 - 6 bar Air consumption 30 l/min Height 200 mm (7.8 in) Diameter 140 mm (5.5 in) Weight 2,7 kg / 5.9 lb WFE Fume extraction unit Compressed air cleaning filter WFES KITfilter 1 Compact Kit 1 Funnel Kit Consists of: HEPA filter H13, wide band gas filter • 1 x Extraction Arm (50 % active carbon, 50 % Puratex) • 1 x Table Mount Kit Fine dust filter F7 • 1 x Length Hose • 1 x Funnel Order No. 0V 005 36 402 99 Order No. 10V T0053657199 1 Fine dust pre-filter F7 WFE WFE 2ES / WFE 2CS Fume extraction unit ® WFE2ES as Weller economical solution WFE P Kit Small, portable, electrically driven fume extraction unit Attributes Attributes ® fume extraction unit purifies air WFE2ES Mobile The Weller WFE P is a line voltage fume Economy Volume Extraction Unit up 2 toPort  workplaces unit designed to run with one or two •extraction Up to Easy Maximum 2 Work Stations filter exchange •FE Brushless EC Fan (Fume soldering irons. The WFE P QuickExtraction) andExtractor simple installation 3 h (WFE CS) • Maximum Airflow 200m Speed control has anOptional: electric, long-life, soundproofed vacuum • Maximum Vacuum 1800Pa to produce the required vacuum – it does •pump F5 Pre-Filter •not H12need MainaFilter (Activatedair Carbon compressed supply. The vacuum Foam) has two •pump Low Noise Levelpower settings which can be se- Up to T0053650599  FE soldering irons 1can be connected Electric vacuum pump to produce the required vacuum  power stages for higher extraction perfomance with  FE soldering irons Portable unit for stand alone applications lected by means of rocker switches depending WFE2ES KIT on the number of FE soldering irons connected 1 Workstation Kit unit. This saves energy. The motor is •to 1 xthe WFE2ES •maintenance-free 1 x Extraction Arm and has a thermal over load • 1 x Table Mount Kit to protect the unit. The filter lift system allows • 1 x Length Hose and convenient main filter replacement. •fast 1 x Funnel Portable fume extraction kit for one work station ESD safe The fume extraction unit WFE 2ES is easy to install and operate. It is designed as a smaller central system and is supplied complete with Technical Data flexible hose, arm and bracket, ready for instalMaximum capacity lation at the workplace. Sound level Operating voltage Power input Maximum vacuum Height 005 36 506 99 WFE 2ES Fume extraction unit Compact filter Fine dust pre-filter F5 Consists2of: filter H12,irons active carbonate foam Scope of supply FEHEPA soldering Fine dust pre-filter F 5 005 36 < 57145 99 db KIT(A) 1 WFat Funnel for volume extraction 1 m60distance WFE P Fume extraction unit consists of: V /Extraction 50 Hz arm 005 36 230 578 99 Compact filter 005 36 573 99 Funnel nozzle 70 W Consists of: HEPA filter H13, wide band gas filter 005 36 574 99 Stop valve 005 36530.000 75 99 Bench filter H12 (50 % active carbon, 50 %HEPA Puratex) Pa mounting bracket 005 36 576 99 Extraction hose 295 mm (11.6 in) 1400V mm Order No. Weight Order No. 10V HEPA filter H13 and wide band gas filter Fine dust filter F7 and active carbonate foam Order No. 0V 005 36 386 99 Order No. 10V WFE2P (5.5 in)005 36 516 99 4 kg / 8.8 lb WFE2ES KIT1 Fine dust pre-filter F7 Option: Arm with slopped nozzle Technical Data Maximum capacity 2 work places Maximum extraction rate 220 m3/h Sound level 55 db (A) at 1 m distance Operating voltage 230V / 50Hz (115V / 60Hz) Power input 115 VA Maximum vacuum 1.800 Pa Weight 1 Scope of supply Diameter 0 Dimensions (L x W x H) low sound level FE soldering irons are connected directly to unit ESD safe low sound level – additional leads are not required. T0053651699 320 x 320 x 395 mm 005 36 572 99 consists of 005 36 578 99 005 36 577 99 005 36 574 99 005 365 75 99 005 36 576 99 KIT 1 WF Sloped 60 for volume extraction Extraction arm Slopped nozzle Stop valve Bench mounting bracket Extraction hose Option: WFE 2CS with speed control 12.6 x 12.6 x 15.5 in Order No. 0V 005 36 526 99 9 kg / 19.8 lb Order No. 10V WFE2CS 1 20 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 20 10/01/14 12:16 PM Exploding Drawing for WFE2P InstallationOption foraC entralS ystem with WFE P Weller KH E Stop + Go-support WDD 161V WFE P soldering iron desoldering iron Installation Option for a Central and Stand Alone System with WFE 20D central system stand alone system with pipe system 50 upto ca. 200 m right angle pipe 50 005 36 322 99 extraction hose 5 mm > 2,5 m bis max. 10 m 005 25 410 00 WSD 81 connecting element 40-50 005 36 415 99 WMD 3 pipe 50 005 36 323 99 double socket 50 005 36 319 99 connecting element 40-50 005 36 415 99 T-piece 50 005 36 344 99 pipe 50 005 36 323 99 connecting nipple for extraction hose 5 mm 005 36 338 99 branch 50 005 36 321 99 pipe clamps 50 005 36 329 99 connecting nipple for hose 17 005 36 358 65 end seal 50 005 36 324 99 pipe 50 005 36 323 99 end seal 50 005 36 324 99 ESD SAF E extraction hose 40 005 36 414 00 extension hose 17 005 36 326 99 adapter 17 005 36 343 99 WFE 20D RS 232 cable (2 m) 005 31 191 99 remote control 005 87 359 09 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 21 21 10/01/14 12:16 PM Accessories for Tip Suction Weller The following products are suitable for 50mm Diameter. When using a 75mm Diameter hose, a tube reducer will be required. Description Material No. WFFMP 50 seal, locking adjustable T0053637199 Spare Part Filters Spare filter for WFE2S: Fine dust filter F5 (10 pieces) Compact filter Consists of: hEPA filter h12, wide band gas filter (10% active carbonate foam) Spare filter for WFE2ES: Fine dust filter F5 (10 pieces) Compact filter Consists of: hEPA filter h12, wide band gas filter (10% active carbonate foam) 22 T0058735884 T0058762701 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 22 10/01/14 12:16 PM Replacement Soldering Tips Description Tip Size mm Reach mm Shelf Pack Material No. 600°F (315°C) 700°F (371°C) 800°F (427°) Screwdriver 1.6 15.9 PTA6 PTA7 PTA8 1 Single flat 1.6 15.9 PTAA6 PTAA7 PTAA8 1 Screwdriver 2.4 15.9 PTB7 PTB8 1 Single flat 2.4 15.9 PTBB7 PTBB8 1 Screwdriver 3.2 15.9 PTC7 PTC8 1 Single flat 3.2 15.9 PTCC7 PTCC8 1 Screwdriver 4.7 15.9 PTD7 PTD8 1 Single flat 4.7 15.9 PTDD7 Screwdriver 6.0 15.9 Conical flat 1.2 15.9 Screwdriver 0.8 15.9 Long Screwdriver 1.2 Long Screwdriver PTC6 1 PTE8 PTH7 PTH8 1 25.4 PTK7 PTK8 1 2.0 25.4 PTL7 PTL8 1 Long Screwdriver 3.2 25.4 PTM7 PTM8 1 Long conical 0.8 25.4 PT07 PT08 1 Conical 0.8 15.9 PTP7 PTP8 1 Narrow Screwdriver 1.6 15.9 PTR7 PTR8 1 Long conical 0.4 25.4 PTS7 PTS8 1 PTS6 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 23 1 1 PTF7 PTH6 Weller PT SERIES Suit WTCPS/T stations and TC series soldering pencils. 23 10/01/14 12:16 PM t WDH 10 (Set) Weller 0°C nents with high heat demands Order number Replacement Soldering Tips ip XT B T0052920299 mm 0 mm mm mm t WDH 10 (Set) 0°C nents with high heat demands XT B10 (Set) tipWDH 0°C mm t WDHwith 10 (Set) nents high heat demands XT B 10 (Set) tpWDH 0°C mm nents 0°C with high heat demands ip XT Bwith high heat demands nents XT B10 (Set) tipWDH ET SERIES Suits EC1000/2000 WES50, WES51, WESD51 stations fitted with EC1201A, WSP50 and WSP51, PES50 & PES51 soldering pencils. Description Material No. Shelf Pack 15.9 ETA 1 15.9 ETAA 1 2.4 15.9 ETB 1 2.4 15.9 ETBB 1 3.2 15.9 ETC 1 3.2 15.9 ETCC 1 4.7 15.9 ETD 1 Tip Size mm Reach mm Screwdriver Order number 1.6 Single flat 1.6 Order number Screwdriver T0054470899 Single flat T0054470399 Order number Screwdriver T0054470199 Single flat Order number T0054470499 Screwdriver Single flat number Order 4.7 15.9 ETDD 1 T0054470999 Screwdriver 0.8 15.9 ETH 1 number LongOrder Screwdriver T0054471599 1.2 25.4 ETK 1 Long Screwdriver 2.0 25.4 ETL 1 Order number Long Screwdriver T0054470599 3.2 25.4 ETM 1 Long conical 0.8 25.4 ETO 1 0.8 15.9 ETP 1 Order number Conical T0054471099 Order number Narrow Screwdriver Order number T0052920299 T0054471699 1.6 15.9 ETR 1 Long conical 0.4 25.4 TETS 1 Conical Order number 0.6 15.9 ETT 1 Single flat Order 0.4 17.8 ETUB 1 T0054470699 number Order number T0052920299 Mini Wave for J Leads and Gullwings ETGW T0054472199 Order number Order number Order number T0054470399 T0052920299 T0054471799 Order number Order number T0052920299 Order number T0054470899 mm T0054470799 Order number mm Order number 00°C mm T0054470399 Order number T0054470199 nents with high heat demands Order number T0054471899 Order number Order number ip XT B T0052920299 Order tmm WDH 10 (Set) T0054470899 Order number number XT SERIES to suit WP120 Soldering Pencil T0054470499 mmm T0054470399 T0054471299 Order number Order number mm mm Order number T0054470399 0°C Order Description Width Thickness Material No. Shelf T0054470199 Order number number T0054470999 mm mm ,4 mm with high heat demands Pack nents Order number T0054470899 T0054471399 Order number Order number ip XT B T0052920299 mm Order number T0054470899 Order number Order number T0054470199 XTALT0054470499 Chisel 1.6 1.0 1 0 mm T0054471599 T0054470199 Order T0054471199 Order number number mm Order number 0 mm T0054470399 Order number T0054470199 Order number mm T0054470999 Order number mm T0054470599 T0054470299 XTMT0054470499 Chisel 3.2 1.2 1 mm Order T0054470299 Order number number Order number mm T0054470899 Order number T0054470499 Order T0054471599 Order number number T0054471099 Order number T0054470999 Order number T0054470399 XTA Chisel 1.6 0.7 1 T0054471499 Order number 0mm mm T0054470399 Order number T0054470199 mm Order number T0054470999 Order T0054470599 Order number number T0054471699 Order number number T0054471599 Order T0054471999 Order number mm T0054470499 XTBOrder Chisel 2.4 0.8 1 T0054470899 number T0054470499 Order number T0054471599 Order number mm T0054471099 BOrder number mm T0054470699 Order number number T0054470599 Order 0 mm T0054472099 Order number T0054470199 number mm T0054470999 T0054470599 XTCOrder Chisel 3.2 0.8 1 Order number T0054470599 Order T0054471699 Order number number T0054472199 Order number number T0054471099 Order mm T0054472299 Order number T0054470499 Order number T0054471599 mm Order number T0054471099 T0054470699 XTD Order Chiselnumber 4.6 0.8 1 T0054470699 T0054471799 Order number number T0054471699 Order Order number mm T0054470999 Order number T0054470599 Order number T0054471699 Order number mm T0054472199 T0054470799 XTE Chisel 5.9 1.2 1 mm T0054470799 Order number number T0054470699 Order Order number T0054471599 Order number mm T0054471099 Order number T0054470699 Order number T0054471799 T0054471899 Order number T0054472199 Order mm Order number number T0054470599 Order number T0054471699 Order number mm T0054472199 Order number 24 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. m T0054470799 T0054471299 Order number number T0054471799 Order Order number mm T0054471099 Order number T0054470699 Order number T0054471799 Order number 4 mm T0054471899 301856 INSIDE PAGES.indd 24 10/01/14 mm T0054471399 Order number T0054470799 12:16 PM Replacement Soldering Tips Material No. Style Size 1 Size 2 Reach LT1 Round 0.25 - 12.5 LT1L Round 0.2 - 25 Bent Round 0.2 - 25 Round 0.2 - 15 LT1SLX Bent Round 0.4 - 20.5 LT1X Bent Round 0.4 - 20.5 LT4AU Single Flat 1.2 - 15 LT4X Bent Round 1.2 0.4 16.4 LTA Chisel 1.6 0.2 12.5 LTAS Round 1.6 - 12.5 LTAX Bent Chisel 1.6 0.8 13.5 LTB Chisel 2.4 0.8 12.5 LTC Chisel 3.2 0.8 12.5 LTCS Round 3.2 - 12.5 LTD Chisel 4.6 0.8 12.5 LTGW Gull Wing 3.2 2.3 17.8 LTF Single Flat 1.2 - 12.5 LTH Chisel 0.8 0.4 12.5 Bent Chisel 0.8 0.2 20 Chisel 1.2 0.4 20 Knife (J-Lead) 6.2 - 20 LTL Chisel 2.0 1.0 20 LTM Chisel 3.2 1.2 20 LTS Round 0.4 - 20 LT1LX LT1S LTHX LTK LTKN T0058744845 Short Barrel 40mm T0058744846 Long Barrel 68mm Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 25 Weller LT Tip Selection Chart to suit WSP80/WP80 25 10/01/14 12:16 PM Replacement Soldering Tips Weller NT Tip Selection Chart to suit WMP Pencil Description Width A Thickness B Length C Material No. Chisel Tip 0.8mm 0.4mm 8.4mm NTH Chisel Tip 1.2mm 0.4mm 8.4mm NTK Chisel Tip 1.6mm 0.4mm 8.4mm NTA Chisel Tip 1.6mm 0.4mm 9.5mm NT6 Chisel Tip 2.4mm 0.8mm 7.4mm NTB Chisel Tip 3.2mm 0.8mm 7.8mm NTC Chisel Tip 4.0mm 0.8mm 7.8mm NTD Chisel Tip, Bent 0.4mm 1.6mm 8.2mm NTAX Round Tip, Bent 0.4mm - 8.6mm NT1X 0.25mm - 7.4mm NT1 - 8.5mm NT1S Soldering Tips for micro soldering pencil WMP Round Tip NT-Tip Round Tip, Small 0.25mm Description Width A Thickness B Length C Chisel tip 0,4 mm 0,8 mm 1,2 mm 1,6 mm 1,6 mm 2,4 mm 3,2 mm 4,0 mm 0,15 mm 0,4 mm 0.4mm 0,4 mm 0,4 mm 0,4 mm 1.2mm 0,8 mm 0,8 mm 0,8 mm 14,0 mm 8,40.14mm mm 8,4 mm 9,5 mm 7,4 mm 7,8 mm 8,2 mm 8,6 mm 8.4mm NT H NT1SC NT K NT A NT 6 9.9mm NT B NT C NT D NT4 3.0mm 13.4mm NTGW Chisel tip, bent Round tip, bent 45° 1,6 mm Ø 0,4 mm 0,4 mm 8,2 mm 8,6 mm NT AX NT 1X Round tip Ø 0,25 mm – 7,4 mm NT 1 8,5 mm NT 1S Chisel Tip Round Tip, Sloped 45° Gull Wing ety rest WDH 60 (Set) ety rest WDH 60 (Set) ety rest WDH 60 (Set) ety rest WDH perature 450°C60 (Set) perature 450°C dering very small SMD parts perature 450°C dering very small perature 450°C soldering tip RTW SMD 2 parts dering very small SMD parts soldering tipsmall RTW SMD 2 dering very soldering tip RTW 2 parts soldering tip RTW 2 2.0mm Order number Order number T0051317899 RTW Tip Selection to suit WMRT thermal tweezer OrderChart number T0051317899 Round tip slim Order – number Ø 0,25 mm T0051317899 T0051317899 Cat No. Ø 1,2 mm – Order number RTW1 Order number T0054465199 Order number T0054465199 Order number T0054465199 NT Measuring T0054465199 tip Order number for thermo element Order number T0054465299 Order number RTW2 T0054465299 Order number T0054465299 T0054465299 Order number Order number T0054465399 Order number T0054465399 Order number RTW3 T0054465399 T0054465399 Order number Order number T0054465499 Order number T0054465499 Order number T0054465499 RTW4 T0054465499 Order number Order number T0054465699 Order number T0054465699 Order number T0054465699 T0054465699 2,0 mm 3,0 mm 13,4 mm Ø 0,5 mm – – W W W W W W W W able, for soldering able, for0201 soldering ponents / 0402 able, for0201 soldering ponents / 0402 able, for0201 soldering ponents / 0402 ponents 0201 / 0402 26 Width 1 0.4mm Width 2 - NT 1SC Style Round tip, sloped 45° Gull wing 0W 0W 0W 0W Dimensions Type/Order No. 9,9 mm Length OA NT 4 NT GW Tweezer tip Single product code Material No. T0054465199 NT MS 0.7mm 0.4mm Tweezer tip T0054465299 3mm 0.7mm Tweezer tip T0054465399 6mm 0.7mm Tweezer tip T0054465499 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 26 120 soldering irons (120 W | 24 V) Order number 10/01/14 12:16 PM Replacement Soldering Tips Material No. Shelf Pack 1.2 T0054445599 1 5.0 2.0 T0054445299 1 LhT-E Chisel Tip 7.0 2.0 T0054445199 1 LhT-F Chisel Tip 9.3 2.0 T0054445099 1 Tip Size mm Material No. mm Shelf Pack T0054460199 1 T0054461299 1 T0054460299 1 Description Tip Size mm mm LhT-C Chisel Tip 3.2 LhT-D Chisel Tip Weller WSP150 SERIES RT SERIES to suit WMRP pencil Description RT1 Needle Tip 0.2 RT1C Chisel Tip 0.4 RT2 Point Tip 0.8 RT3 Chisel Tip - Straight 1.3 0.4 T0054460399 1 RT4 Chisel Tip - 1.5mm thick 1.5 0.4 T0054460499 1 RT5 Chisel Tip, bent, 30° 0.8 0.4 T0054460599 1 RT6 Round Tip, bevelled, 45° 1.2 T0054460699 1 RT7 Knife Tip, sloped, 45° 2.2 T0054460799 1 RT8 Chisel Tip 2.2 0.4 T0054460899 1 RT9 Chisel Tip 0.8 0.4 T0054460999 1 RT10GW Gull Wing 1.2 2.0 T0054461099 1 RT11 Chisel Tip 3.6 0.9 T0054461199 1 T0054461399 1 RT Measuring Tip 0.15 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 27 27 10/01/14 12:16 PM Replacement Soldering Tips Weller WT SERIES to suit WT-50 Thermal Tweezers Tip Size mm “x” mm Material No. Shelf Pack WTA-1 1.0 11.0 T0054414199 1pr WTA-2 WTA-2 3.0 11.0 T0054414699 1pr WTA-3 WTA-3 6.0 11.0 T0054414799 1pr WTA-4 12.5 10.0 T0054414399 1pr WTA-5 18.5 12.0 T0054414499 1pr WTA-12 3.0 T0054415399 1pr Tip Size mm Material No. Shelf Pack Taper 1.0 WPT01 1 Screwdriver 2.4 WPT02 1 Chisel 2.0 WPT03 1 Screwdriver 5.0 WPT04 1 Nozzle 1.5 WHC0150 1 Nozzle 4.7 WHC0152 1 Tip Size mm Material No. Shelf Pack Tapered Needle 0.5 WPT15 1 Chisel 3.0 WPT16 1 hot Blow 1.5 WHC54 1 hot Blow 4.9 WHC55 1 Catalogue No. WTA-12 WPT0 SERIES PYROPEN TIPS, Suit WSTA6 Auto Ignition Jr. Description WPT SERIES PYROPEN TIPS, Suit WST2 Junior Description 28 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 28 10/01/14 12:16 PM Replacement Soldering Tips Tip Size mm Material No. Shelf Pack Conical 3mm 720101AU 1 Chisel 10mm 720102 1 Spade 4mm 720103 1 Conical 2mm 720105 1 Spade 4mm 720106 1 Pyramid 2mm 720107AU 1 Flat 3mm 720113 1 hot Blow 4mm 720151 1 hot Blow 6mm 720152 1 hot Blow 10mm 720153 1 Tip Size mm Material No. Shelf Pack Taper - WPT1 1 Chisel 2.0 WPT2 1 Spade 2.0 WPT3 1 Spade 45° 3.0 WPT4 1 - WPT5 1 Square Taper Pyramid 0.5 WPT7 1 Spade 35° 2.0 WPT8 1 Spade 35° 3.0 WPT9 1 Offset Tapered Needle 1.0 WPT10 1 Chisel 8.0 WPT11 1 Round head Needle 3.0 WPT12 1 Long Tapered Needle 5.0 WPT13 1 - WPT14 1 hot Blow 2.5 ID WHC50 1 hot Blow 3.3 ID WHC51 1 hot Blow 4.9 ID WHC52 1 hot Blow 7.4 ID WHC53 1 heat Shrink Attachment Long WAR54 1 heat Shrink Attachment Small WAR55 1 Description Weller REPLACEMENT TIPS JUMBO PYROPEN WSTA5 WPT SERIES PYROPEN TIPS, Suits WSTA3 and WPA2 Description Taper Needle Threaded Tip Base Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 29 29 10/01/14 12:16 PM Replacement Soldering Tips Weller PSI SERIES PORTASOL TIPS Suit PSI-100 Irons Tip Size mm Material No. Shelf Pack Single Flat 1.0 PSI1 1 Single Flat 2.4 PSI2 1 Single Flat 3.2 PSI3 1 Single Flat 4.8 PSI4 1 Single Flat 1.0 PSI5 1 Double Flat 2.4 PSI6 1 Double Flat 3.2 PSI7 1 Double Flat 4.8 PSI8 1 hot Blow - PSI9 1 Hot Knife - PSI10 1 Description Replacement Desoldering Tips DS SERIES TIPLETS Suit DS102, DS651, DS1201, DS1203A Tools and DS650 Station/DS80UNC/DSV80 Description mm Tip Size mm Material No. Shelf Pack DS103 1 mm DS103 Collecter Tube Assy. DS110 0.63 1.52 12.7 DS110 1 DS112 0.91 1.93 12.7 DS112 1 DS113 1.16 2.48 12.7 DS113 1 DS114 1.80 3.25 12.7 DS114 1 DS116 1.14 2.48 19.05 DS116 1 DS117 Desoldering Tip 1.5 2.9 18 T0051355000 1 DS113 Desolder Tip Left 1.2 2.5 18 T0051351300 1 DS119 0.7 1.9 26 T0051352700 1 Metric 30 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 30 10/01/14 12:16 PM Replacement Desoldering Tips Outside Ø Inside Ø Length a Material No. Shelf Pack DX110 NOZZLE 1.9 0.7 23 T0051314000 1 DX111 NOZZLE 2.5 0.7 23 T0051314100 1 DX112 NOZZLE 2.3 1.0 23 T0051314200 1 DX113 NOZZLE 2.5 1.2 23 T0051314300 1 DX113HM NOZZLE with improved thermal transfer 2.5 1.2 23 T0051315000 1 DX114 NOZZLE 3.3 1.8 23 T0051314400 1 DX115 NOZZLE 1.9 0.7 27 T0051314500 1 DX116 NOZZLE 2.7 1.2 27 T0051314600 1 DX117 NOZZLE 2.9 1.5 23 T0051314700 1 DX118 NOZZLE 1.5 0.7 23 T0051314800 1 DX119 Needle tiplet with non wettable stainless steel tube for removal of solder bridges in connection with hot air pencil 1.1 0.7 31 T0051315100 1 DX120 NOZZLE without inside tube for cleaning sMD pads 2.5 1.1 22 T0051315200 1 DX Cleaning Tool (Conus insert cleaning tool) T0058706794 1 Nozzle Set DX110-DX115 T0051379099 1 Description Weller DSX SERIES CAM LOCK TIPS Replacement Soldering Tips CT5 SERIES Suits W60D Soldering pencil Description Tip Size mm Reach mm Shelf Pack Material No. 600°F (315°C) 700°F (371°C) 800°F (427°C) CT5A7 CT5A8 1 CT5AA7 CT5AA8 1 CT5B8 1 Screwdriver 1.6 29.36 Spade 1.6 19.00 Screwdriver 2.4 29.36 Spade 2.4 19.00 CT5BB6 CT5BB7 Screwdriver 3.2 29.36 CT5C6 CT5C7 CT5C8 1 Spade 3.2 19.00 CT5CC6 CT5CC7 CT5CC8 1 Screwdriver 4.8 29.36 CT5D7 CT5D8 1 Spade 4.8 19.00 CT5DD7 CT5DD8 1 Screwdriver 6.35 29.36 CT5E7 1 Spade 6.35 19.00 CT5EE7 1 CT5AA6 1 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 31 31 10/01/14 12:16 PM Replacement Soldering Tips Weller CT6 SERIES Suits W100D Soldering pencils Description Tip Size mm Reach mm Shelf Pack Material No. 600°F (315°C) 700°F (371°C) 800°F (427°C) CT6C8 Screwdriver 3.18 37.3 CT6C6 CT6C7 Screwdriver 4.76 37.3 CT6D6 CT6D7 Screwdriver 6.35 37.3 CT6E6 CT6E7 CT6E8 1 CT6F6 CT6F7 CT6F8 1 Soldering Irons and Tips Magnastat Controlled Line Voltage Soldering Irons / Unregulated Line Voltage Irons Screwdriver 9.52 Soldering 37.3 Welding Mirror (50 x 40 x 4) teflon coated Order No. 005 61 056 99 Description Line voltage soldering iron 200 W, 230 V, Magnastat controlled CT2 SERIES Suits W201 Soldering Iron • complete with soldering tip CT2 F7 and safety rest Screwdriver Soldering Tips for W 201 1 T0051176799 Model W 201 Screwdriver (CT2E7, CT2E8) 1 Price (€) 98,00 7.0 - T0054240799 T0054240899 1 10.0 - T0054241799 T0054241899 1 (CT2F6, CT2F7, CT2F8) Order No. Screwdriver 005(CT2G8) 42 407 99 005 42 408 99 Model CT2 E7 CT2 E8 Description11.0 Chisel tip 370°C Chisel tip 425°C 005 42 417 99 005 42 418 99 CT2 F7 CT2 F8 005 42 428 99 CT2 G8 Width A 425° Price (€) T0054242899 7,0 mm 7,0 mm 16,90 16,90 Chisel tip 370°C Chisel tip 425°C 10,0 mm 10,0 mm 16,90 16,90 Chisel tip 425°C 11,0 mm 16,90 7,0 mm 7,0 mm 16,90 16,90 S.M.T. Soldering and Desoldering Accessories 1 HOT AIR NOZZLES FOR HAP1 Hot Air Pencil 005 42 507 99 CT2 EX7 005Description 42 508 99 CT2 EX8 005 42 517 99 F04 005 42 518 99 F04 F06 005 15 124 99 005 13 824 99 Chisel tip bent 370°C Chisel tip bent 425°C CT2 FX7 Chisel tip bent 370°C Flat Nozzle CT2 FX8 Chisel tip bent 425°C Flat Nozzle WDC 10,0 mm 10,0 mm Weller WDC – Dry Cleaner (see page 168) Metal wool WDC replacement (2 pieces) 10 x 1.5mm 12 x 1.5mm 16,90 16,90 19,00 4,10 Material No. Shelf Pack T0058727773 1 T0058727772 1 Unregulated Line Voltage Soldering Irons Robust heating elements of special steel between natural mica-leaves, embedded in cast ceramics and first-class material make the Weller SPI irons outstanding in technology and life-time. The SPI irons come with plated and oxidation prevented Weller “Longlife“ tips. Order No. 005 64 005 99 Model SPI 16 Description Line voltage soldering iron 15 W, 230 V, unregulated • complete with soldering tip 4SPI15212 and holder • Heating up time ~180 sec. • Tip temperature ~360°C Price (€) 39,50 Soldering Tips for SPI 16 32 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 32 Order No. 4SPI15 210 4SPI15 213 Model SPI15 210 SPI15 213 Description Pointed tip Pointed tip Width A 0,4 mm 0,8 mm Price (€) 4,20 4,20 10/01/14 12:16 PM 301856 INSIDE PAGES.indd 33 10/01/14 12:16 PM High Precision Tweezers Erem Tweezers Introduction The following pages show a selection of Erem high precision tweezers for the electronics industry. They are available in various shapes, finish, and materials such as: Temperature resistant to 300°C. Suffix S SA N TA None Material Stainless Steel. Non-magnetic, anti-acid alloy. Non-magnetic nickel-silver alloy. Non-magnetic titanium. Tempered carbon steel. Features and benefits: • Twice the heat resistance of Teflon (500°C). • The non-stick property of the Pyroplast coating results in no capillary effect on the tweezers tips while soldering. • No contamination can be caused by either a positive or negative charge. • Resistant to radiation. • Coating thickness is 40 microns. Typical applications for Erem high precision tweezers: • Electronic assembly • Component handling • Soldering • Wire and lead cutting • Gripping • Wafer handling • Wire stripping • Biomedical Erem Reference Dimensions Erem Coatings The exclusive Erem Pyroplast coating is available by special order on many models. This coating protects sensitive parts against temperature change. Pointed Tips Straight Description Shelf Pack • • • • • Precision micro tweezers Stainless Steel Serrated grips and inside serrated tips Guide pin to avoid tip overlapping 80mm, 6g 20AS 1 • • • • • Precision tweezers Special Stainless Steel Non-magnetic Shorter tips than 3CS 110mm, 11g 3CSA 1 3CSASL 1 same as 3CSA but economy model • • • • • Precision tweezers Special Stainless Steel Non-magnetic Flat inside tips, very resistant 120mm, 14g OOSA 1 • • • • Precision tweezers Special Stainless Steel Non-magnetic 120mm, 16g AASA 1 • • • • Precision tweezers Non-magnetic Medium round tips for gripping tip side 2mm 120mm, 15g 2ASA 1 SSSA 1 • Precision tweezers • Special Stainless Steel • Non-magnetic • Very narrow and long handles • Low tension • 140mm, 11g 34 Material No. Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 34 10/01/14 12:16 PM Cutting – high grade tool steel, ESD safe Model/Order No. 599FO Description Side cutter for Kevlar silks only, 115 mm, 67 g Price (€) 133,00 Pointed Tips Straight Relieved Description Material No. 599TFO Side cutter semi flush cut, Tungsten Carbide blades, forvery cutting • Precision tweezers, with fine fibre tips optics, Kevlar and small stainless wires, • Special Stainless Steel115 mm, 67 g 165,00 Shelf Pack 5SA 1 258SA 1 • Non-magnetic • 115mm, 12g • Precision tweezers with synthetic (PPS) tips • Special Stainless Steel • Non-magnetic • ESD safe Holding / Gripping • Heat resistant up to 250°C • 120mm, 15g Model/Order No. Description • Precision tweezers with pointed tweezers synthetic (PPS) tipstips, 249SA Precision with PPS and serrated finger grips for secure handling special stainless steel, non magnetic, • Volume resistance 16 Ω/cm 120 mm, 20 g • Heat resistant up to 250°C Price (€) 249SA 22,50 1 3CBS 1 5ASA 1 5ASASL 1 Precision tweezers with fine tips Curved Special Stainless Steel Non-magnetic, relieved 120mm, 15g 7SA 1 same as 7SA but economy model 7SASL 1 Pointed Tips Bent Kit for SMD handling • Precision tweezers with fine tips Model/Order • Curved 40° No. • Stainless Steel 3900KC Description Kit for SMD handling • 110mm, 15g consists of: 51SA tweezers • Precision tweezers with fine precision tips 102ACA SMD tweezers • Oblique 15° • Special Stainless Steel103ACA SMD tweezers • Non-magnetic 150SAMB SMD tweezers • 115mm, 12g 150SAMF SMD tweezers same as 5ASA but economy 670EPmodel tip cutter 48 Fibre Optic Tools/Kits Erem • Resistant to acids and molten soldering tin. • Water repellant • • • • • Price (€) 172,00 • • • • • • Precision tweezers bent 40° Alignment pin Serrated grips and inside serrated tips Special Stainless Steel Non-magnetic 150mm, 22g 24SA 1 • • • • • Precision tweezers bent 50° with fibre-grip handles Reverse action Special Stainless Steel Non-magnetic 150mm, 26g 30SA 1 • • • • Cutting tweezers Carbon steel Blade 9,5mm 115mm, 26g 15AGW 1 Cutting Tweezers Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 35 35 10/01/14 12:16 PM Cutters Side Cutters Cutters Series 600 Micro – high grade tool steel, ESD safe, resharpenable Side- and Tip Cutters Miniature cutters for extremely fine electronics offering improved access into confined areas. CUTTERS SERIES 600 MICRO - HIGH GRADE TOOL STEEL, ESD SAFE, RESHARPENABLE Miniature cutters for extremely fine electronics offering improved access into confined areas. Micro Micro Medium Medium Maxi Maxi Tip Cutters – tapered and relieved head Fine cutter head. One side is cut away for access even in confined areas. b a Series 600 Series 2400 Series 500 New Series Series 600 2400 Series 500 Description MagicSense Side relieved head, MagicSense 9,0 cutter mm flush cut, super fine 11,0 mm 11,0 mm allows very good access, 11,0 6,0 Width a b 9,0 mm mm 11,06,5 mmmm Thickness 6,0 mm mm medium hard wire 0,6 mm, Cu 0,8 mm, Thickness b 6,0 mm 6,0 mm 6,5 mm Sideand Tiphead Cutters Tip Cutters - tapered and relieved 110 mm, 48 g Series 800 Cutters Series 800 Price (€) Model/Order No. 622NB Width a 35,00 13,5 mm 13,5 mm 7,5 mm 7,5 mm Cutters Erem Side- and Tip Cutters Fine cutter head. One side is cut away for access even in confined areas NEW Cutters Side- and Tip Cutters Description Material No. Side Cutters – oval head 676E Sidehead cutter cut, same as 622NB, The most common cutting forflush standard cutting applications. The robust cutting head allows high44,00 cutting Cutters – tapered short cuttingTip head and more robust and relieved head capability. Fine head. side is cut away for access even in confined areas. medium hard wirecutter 0,6 mm, CuOne 0,8 mm, Shelf Pack 110 mm, –48high g Series 2400 MagicSense grade tool steel, ESD safe, resharpenable Model/Order No. Description Price (€) Medium size. Combines robustness, view and accessibility. The series 2400 MagicSense offers optimal ergonomic 612N Side cutter semi flush cut, small head for very good access, 35,00 shape and very high hardness grade.Model/Order No. Description 776E 44,00 Side cut, cutterhard 1 medium wire 0,8 mm, hard wire 0,5 mm, Cu 1,3 mm, 776Ecutter super full flushSide super full flush cut, 622NB Side cutter flush cut, super fine relieved head, miniature side cutter, super fine relieved head, 110 mm, 48 g miniature side cutter, super fine relieved head, Medium allows very good access, Maxi allows very good access, Micro allows very medium hard wire 0,6 mm, Cu 0,8 mmgood access, medium hard wire 0,6 mm, Cu 0,8 mm, medium hard wire 0,6 mm, Cu 0,8 mm, 110mm, 48g ESD SAFE 110 mm, 48 g Cutters Side Cutters 622N b a 632NCF P 110 mm, 48 g Side cutter flush cut, small head for very good access, 35,00 Side cutterhard superwire full flush cut, Cu 1,3 mm, 62,00 medium 0,8grade mm, Series 2400 MagicSense – high tool steel, ESD safe, resharpenable Side cutter flush cut, same asSeries 622NB,800 only for 600 soft676E materials (seeSeries page 34, Specials) New Series 2400 Series 500 110robustness, mm, 48 g TOOL Medium size. Combines and accessibility. Thecutting series 2400 MagicSense offers optimal ergonomic CUTTERS SERIES 2400 MAGICSENSE - HIGH GRADE STEEL,short ESD SAFE, headRESHARPENABLE and more robust 110 mm, 48 g view MagicSense shapesize. andCombines very high hardness grade. Medium robustness, view and accessibility. The series 2400 MagicSense medium hard wire 0,6 mm, Cu 0,8 mm,optimal Width a 9,0 mm 11,0 mm 11,0 mm 13,5offers mm Series 600 Micro – high grade tool steel, ESD safe, resharpenable ergonomic shape and very high hardness grade. 110 mm, 48 g Thickness b 6,0 mm 6,0 mm 6,5 mm 7,5 mm NEW Miniature cutters for extremely fine electronics offering improvedMaxi access into confined areas. Maxi 36,00 medium hard wire 0,7 mm, Cu 1,3 mm, Side Cutters – oval head Micro Maxi 776E Side cutter super full flush cut, Medium mm, g relieved Tip – straight, tapered and head TheCutters most common cutting110 head for 48 standard cutting applications. The robust high cutting miniature sidecutting cutter,head superallows fine relieved head, Fine cutter head allows access even in confined areas. capability. allows very good access, b a medium hard wire 0,6 mm, Cu 0,8 mm, Model/Order No. Description Price (€) Series 600 600 Series 2400 Series 800 New Series Series 2400 Series 500 500 Series 800 110 mm, 48 gSeries b a Model/Order No. Description Price (€) MagicSense 2412E Semi flush cut, robust cutting head for general 43,00 MagicSense 670E a Tip cutter, flush cut, vertical, short11,0 head,mm 48,00 Width 9,0 mmapplications, 11,0 mm Series 2400 13,5 mm cutting high cutting capability, New Series 600 super Series 800 Width a 9,0 hard mm 11,0 mm 11,0 mmflush cut, 13,5 Series mm 500 632NCF Side cutter full medium wire 0,5 mm, Cu 0,8 mm, medium hard 6,0 wiremm 0,5 mm, Cu 1,6 mm, Thickness b 6,0 mm hard wire 1,0 6,5 mm MagicSense 7,5 mm Thickness b 6,0 mm 6,0 mm 6,5 mm 7,5 mm only for soft materials (see page 34, Specials) 110 130mm, mm 48 g 9,0 mm 11,0 mm 11,0 mm 13,5 mm Side Cutters - oval headSide Cutters – tapered head Width a 110 mm, 48 g Small tapered head for cutting application Thickness inb dense working 6,0areas. mm 6,0 mm 6,5 mm 7,5 mm Description Material No. Shelf Side Cutters – oval head Pack 2422E Flush cut, robust head for general cutting applications, 43,00 Model/Order No. cutting Description Price (€) The most common head forcut, standard applications. The robust cutting head allows 61,00 high cutting 670EP Tip cutter, flush vertical, verywire, precise, short head, high cutting capability, for cutting soft The most common cutting head 622NA Side cutter flush cut, 35,00 Side Cutters – oval head capability. for PCBs and packages up1,6 to 0,25 for standard cutting applications. medium hardmicro wire 1,0 mm, Cu mm, mm, medium hard wire 0,7 mm, 1,0 The robust cutting head allows Thewire most cutting head for standard cutting applications. The robust cutting head allows high cutt medium 0,4common mm, Cu Cu 0,6 mm,mm, 130 mmhard high cutting capability. 110 mm, 48 g capability. 48Tip g Cutters – straight, tapered and relieved head Model/Order No. 110 mm, Description Price (€) 632N 2412E Micro Medium Micro Side cutter super full flush cut,Medium small head for very good access, Semi flush cut, robust head for general Fine cutter head cutting allows access even in confined areas. medium hard wire 0,5 mm, Cu 0,8 mm, Flush cut, robust head for general 43,00 110cutting mm, 48applications, g Wire definitions see p. 22 Cutters 25 high cutting capability, for soft wire, 622N medium hard wire 1,0 mm, CuSide 1,6cutter mm, flush cut, small head for very good access, medium hard wire 0,8 mm, Cu 1,3 mm, 130 mm Side Cutters – tapered head 110 48flush g cut, vertical, very precise, short head, Small tapered head for cutting application 670EPin dense working areas. Tip mm, cutter, 24 Cutters 2422E for PCBs and micro packages up to 0,25 mm, Model/Order No. 2432E 2477E 36 43,00 2432Efull flush cut, rasor blades Supercutting full flush cut, rasor blades cut Description No. 2432E 43,00 Super cut Model/Order 1 applications, high cutting capability, 670EPF hard wire 0,8 mm, Same as 670EP but finer version 67,50 medium Cu 1,6 mm, medium hard wire 0,8 mm, Cu 1,6 mm, 612N Sidewire cutter cut,mm, small head for very good access, medium hard wire 1,0 mm, hard 0,5semi mm,flush Cu 1,6 130mm for pitches under 0,5 mm, short head, 130micro mm hard wire 0,8 mm, hard wire 0,5 mm, Cu 1,3 mm, 130 mm Model/Order No. aftermedium Description Optional: Safety lead device 12,6048 Euro cutting. 110+ mm, g holds wire scraps ESD SAFE 110 mm, 48 g 595EW Note: For all side cutters series 500, 600 and 2400. Add “W” when ordering, e.flush g. 670E Tip cutter, cut, vertical, short head, Wire definitions see p. 22 Description Super full flush cut, rasor blades cut hard wire 0,4 mm, Cu 0,6 mm,Price (€) 43,00 medium Flushmedium cut, tapered 46,00 hardhead, wire for 0,8cutting mm, Cu 110 1,6 mm, 48 g in dense working areas, 632N Side cut, small head do fornotvery good access, Note: Some of the above items may require a freight lead time.application Product are not to scale. Broken shelfcutter packs super attract afull 5% flush Surcharge. Prices herein include GST. 130depictions mm medium hard wire 1,0 mm, Cu 1,3 mm, medium hard wire 0,7 mm, Cu 1,3 mm, 127 mm 110 mm, 48 g 301856 INSIDE PAGES.indd 36 670EPF Same as 670EP but finer version 10/01/14 12:16 PM Pr P Cutters Medium size. Combines robustness, view and accessibility. Big variety of cutting heads for precise cutting in dense working areas. SideSide- and andTip TipCutters Cutters Micro Cutters Medium Maxi Side Cutters Series 500 Medium – high grade tool steel, ESD safe, resharpenable Series Medium – high grade tool steel, ESD safe,heads resharpenable Medium size.500 Combines robustness, view and accessibility. Big variety of cutting for precise cutting in dense a size. Combines robustness, view and accessibility. Big variety of cutting heads for precise cutting in dense b Medium working areas. CUTTERS SERIES 500 MEDIUM HIGH GRADE TOOL STEEL, ESD SAFE, RESHARPENABLE working -areas. Series 600 Micro – high grade tool New Series 2400 Series 600 Series 500 Series 800 Medium size. Combines robustness, view and accessibility. Big variety of cutting heads for precise cutting in Miniature Micro Medium Maxi cutters for extremely fine electronics MagicSense dense working areas. Micro Width a 9,0 mm 11,0 mm 11,0 mm Medium 13,5 mm Maxi Micro Medium Maxi Micro Thickness b 6,0 mm 6,0 mm 6,5 mm 7,5 mm a b b a New Series 2400 Series 600 Series 500 Series 800 Series 600 New Series 2400 Series 500 800 a b Series Side Cutters – oval head MagicSense MagicSense New Series Series 600 2400 Series 500 Series 800 The most head for standard cutting applications. The11,0 robust head allows cutting Width aa common cutting 9,0 mm 11,0 mm 13,5 mm Width 9,0 mm 11,0 mm11,0 mm mmcutting 13,5high mm MagicSense Series 600 Thickness 6,0mm mm capability.bb Thickness 6,0 6,0 mm 6,0 mm 6,5 mm 6,5 mm 7,5 mm7,5 mm Side Cutters - oval head The most common cutting head for standard cutting applications. The robust cutting head allows high cutting capability. Side- and Tip Cutters Side- and Tip Cutters Model/Order No. Description 512N 9,0 mm 6,0 mm Cutters 11,0 mm 6,0 mm Side Cutters 11,0 mm 6,5 mm 13,5 mm Width a 7,5 mm Price (€) Thickness b Material No.35,00 9,0 mm Description 6,0 mm Shelf Side cutter semi flush cut, economical line, Pack robust, for general cutting applications Side Cutters – oval head and precise working, high cutting capability, Sidehigh Cutters The most common cuttingmedium head for standard cutting applications. cutting– oval head hard wire 1,0 mm, hard wire 0,5The mm,robust Cu 1,6cutting mm, head allows Series 600 Micro – high grade tool capability. Side Cutters – oval head The most common cutting head for standard cu 115 mm, 67 g cutters extremely fine electronics The most common cutting head for standard cutting applications. The robust cuttingMiniature head allows highforcutting capability. Model/Order (€) capability. 512NPrice Side cutter semiNo. flush cut,Description economical line,flush cut, same as 512N 1 512E Side cutter semi 43,00 robust, applications 512N for general cuttingSide cutter semi flush cut, economical line, Micro but burnished head, Model/Order35,00 No. Description and precise working, highrobust, cutting for capability, general cutting medium hard wire 1,0 mm,applications hard wire 0,5 mm, Cu 1,6 mm, Model/Order No. Description medium hard wire 1,0 mm, hard wire 0,5 mm, Cu 1,6 mm, and precise working, high capability, 115 mm, g semi flushcutting 115mm, 512N67g Side 67 cutter cut, economical line, 612N ESD SAFE medium hard wire 1,0 mm, hard wire 0,5 mm, Cu 1,6 mm, Tip Cutters – angled, narrow head robust, for general cutting applications 522N Side cutter flush cut, economical 115 mm,line, 67 robust, g Angled head for precision, reach operator visibility. and precise working, high cutting capability, for general cutting applications andand precise working, b a 522Ncutting capability, Side Cutters cutter flush– cut, economical line, robust, ESD safe, resharpenable 35,00 Tungsten Hard Metal high grade tool high medium hard wire 1,0 mm, hard steel, wire 0,5 mm, Cu 1,6 mm, 512Egrade Side cutter semi flush cut, same and as 512N forCugeneral cutting applications precise working, medium hard wire 1,0 mm, 1,6 mm, High tool steel, Tungsten Carbide blades, for constant load. High precision side cutter for stainless and43,00 hard 115 mm, 67 g ESD SAFE but burnished head, 115mm, 67g high cutting capability, wires like Nickel plated wire and cored-wire electrode. Piano until 60 HRc. Cutters Cutters New Erem Cutters Cutters Width a Thickness b Price Side(€) cutter semi flush 35,00 hard wire 0,8 medium 110 1 mm, 48 g Series 600 New Model/Order No. 555E 512E Description Price (€) 622N Side cutter flush cut, sm Cutters medium hard wire 1,0 mm, hard wire 0,5 mm, 1,6 mm, Sideand Tip Cu Cutters CuSide 1,6 mm, Tip cutter flush cut 35°,flush smallcut, cutting head, 56,50 Width a 9,0 mm hard wire 0,8 Side cutter semi same as 512N 43,00 medium 115 mm, 67 g strong for cutting Thickness b 6,0 butversion, burnished head, applications in confined areas 110mm mm, 48 g Tip Cutters angled, narrow head where high cutting capacity is required, Sideand Tip -Cutters medium hard wire 1,0 mm, hard wire 0,5 mm, Cu 1,6 mm, 599E Cutters – oval head Side cutter flush cut, with short and robust head, 46,50 Side medium hard wire 0,6 mm, Cu 1,3 mm, Angled head for precision, reach 522N Side cutter flush economical line, robust, 35,00 115 mm, 67cut, g1,0 medium hard wire mm, Cu 1,6 mm, The most common cutting head for standard cutting applications. The robust cutting head allows high cutting Series 600 Micro high grade Tip Cutters – narrow head tool 120 mm, 68 g and operator visibility. Side Cutters –angled, oval – head for applications and precise working, 115general mm, 67cutting g capability. Miniature cutters for extremely fine Angled head for precision, reach and operatorcuv The most common cutting head for electronics standard high cutting capability, 632N 572E 50,00 Side cutter super full fl 572E Tip cutter flush cut 40°, relieved jaws for easier access, Tip cutter flush cut 40°, relieved jaws for easier access, 1 Tungsten Hard Metal Cutters – high grade ESD safe, resharpenable capability. medium hard wire 1,0 cut, mm, Cu 1,6tool mm, steel, 522Nhard wire cutter flush economical line, robust, 35,00 hard wire 0,7 medium medium 0,6 mm, CuSide 1,3 hard mm, Model/Order Description (€) medium wire 0,6 mm, Cu 1,3 mm, Micro High grade tool No. steel, Tungsten Carbide blades, for constant load. High precision side cutter for stainless Price and hard 115 mm, 67 g 115mm, 68g for general cutting applications and precise working, 110 mm, 48 g 622TX Flush cut, miniature side cutter, small head, 130,00 115 and mm,cored-wire 68 g wires electrode. Piano until 60 HRc. Model/Order No. Description 532Nlike Nickel plated wire Side high cutter super full flush cut, for wire precise No. Description piano wirecutting 0,2 mm, medium hard 0,6cutting, mm, hard wire 0,4 mm, Model/Order35,00 capability, ESD SAFE 46,50 555E Tip 35° 599E Side cutter flush cut, cut, with short and robust head, with1,2 very 612N Sidecutter cutterflush semicut flush Cu mmsharp medium hard wire 1,0 mm, Cu 1,6 mm, medium hard wire 1,0 strong version, for cutt 0,8 mm, Cu 1,6 mm, medium hard wire 0,8 115 mm, 67 g 115 mm, 67 g where high cap a b 110 mm, 48cutting g 582E Tip cutter flush cut 45°, ideal for working 48,00 CUTTERS TUNGSTEN HARD METAL CUTTERS HIGH GRADE TOOL STEEL, ESD SAFE, RESHARPENABLE Side Cutters – oval head medium hard wire 0,6 onhead PCBs orcutter cutting component leads, Side flush cut, with short and robust 46,50 The599E most cutting for standard cutting applications. The robust cutting headside allows highfor cutting high gradecommon tool steel, Tungsten Carbide blades, for constant load. highhead, precision cutter stainless and Series 600 120 mm, 68 g New 599T Semi flush cut, robust side cutter, 107,00 „Anti Overbite System“ avoids blades overlapping, hard wires like Nickel plated wire andhard cored-wire electrode. Piano capability. medium wire 1,0 mm, Cu 1,6 mm, until 60 hRc. Tungstenhard Carbide blades, forCu standard medium wire mm, 1,3 mm,cutting applications, Side Cutters 35,00 – tapered head 28 Cutters 67full g0,6flush Side 115 cuttermm, super cut, for precise cutting, Width a 9,0 mm flush cut 40° Side Cutters - oval head 532N highmm, cutting capability, piano wire 0,6 mm, 572E Tip 115 68 g 622Ntapered Sidecutter cutter flush cut, s Small head application in de Model/Order No. Description Price (€)for cutting with very sharp cut, Thickness b 6,0 mm medium hard wire 1,0 mm, hard wire 0,8 mm, Cu 1,5 mm, medium Description Material No. medium hard hard wire wire 0,6 0,8 622TX Flush cut,hard miniature side cutter, small head, 130,00 Shelf medium wire 0,8 mm, Cu 1,6 mm, 115 mm, 67 g tapered head for access even in confined areas, Pack 582EW flush cut, small 58,00 115 pianomm, wire67 0,2 110 mm, mm, 68 48 gg 115 g mm, medium hard wire 0,6 mm, hard wire 0,4 mm, Model/Order No. Description same as 582E but wirh safety lead service, The most common cutting head Cu 1,2 mm 532N cutter super full flush 35,00 622NA Side cutter flush cut, for standard cutting applications. 599TF FlushSide cut,hard robust side Side Cutters108,00 – oval head medium wire 0,6cutter, mm, Cu 1,3cut, mm,for precise cutting, The robust cutting head allows with very sharp cut, medium hard wire 0,7 Tungsten Carbide blades, for standard cutting applications, 115 mm, 67 g The most common cutting head for standard cu high cutting capability. medium hard wire 0,8 mm, Cu 1,6 mm, 110 mm, 48 g high cutting capability, piano wire 0,6 mm, capability. 28 Cutters 582E Tip cutfull 45°f 632N Sidecutter cutterflush super 115hard mm,wire 67 g1,0 mm, hard wire 0,8 mm, Cu 1,5 mm, medium 599T 107,00 Semi cutter, 1 PCBs or cutting com 599Tflush cut, robust sideSemi flush cut, robust side cutter, on medium hard wire 0,7 115 mm, 67 gcutting Tungsten for cutter standard applications, 593AE Carbide blades,Tip flush cutblades, 30°, cut DIL leads from the rear, Tungsten Carbide foreasily standard cutting applications, Model/Order55,00 No. Description „Anti Overbite 110 mm, 48 g System high cutting capability, piano wire 0,6 mm, cut pins on dense PCBs, high cutting capability, wire 0,6 mm, 612N Side cutter semi flush medium hard wire 0,6 medium hard wire 1,0 mm, hard wire 0,8 mm, Cu piano 1,5 mm, medium 1,0wire mm,0,8 mm, Cu 1,5 mm, ESD SAFE medium hard hard wire wire 0,4 1,0 mm, mm, Cu hard 115mm, 67g medium hard wire wire 0,8 115 mm, 68 g Optional: Safety lead device + 12,60 Euro holds 28 Cutters 115 115 mm, mm, 68 67 gg Side Cutters - tapered head 24 Side Cutters – tapered head 599TF Flush cut, robust side cutter, Small tapered head for cutting application in dense working areas. Cutters 575E Tip cutter flush cutblades, very small cutting head, Small tapered head for cutting application in45°, dense areas. Tungsten Carbide forworking standard cutting applications, for dedicate work on hybrid circuits or micro high cutting capability, piano wire 0,6 mm, modules, medium hard 0,6wire mm,0,8 mm, Cu 1,5 mm, medium hard wire wire 0,2 1,0 mm, mm, Cu hard Model/Order No. Description 110 mm, 67 gg 115 mm, 67 595Tcutter semi flush cut,Side cutter semi flush cut, Side Tungsten Carbide blades, Tungsten piano wireCarbide 0,4 mm,blades, piano wire 0,4 mm, medium hard wire 0,8 mm, hard wire 0,6 mm, Cu 1,5 mm, medium hard wire 0,8 mm, hard wire 0,6 mm, Cu 1,5 mm, 115mm, 67g 115 mm, 67 g Wire definitions see p. 22 Side Cutters – tapered head Side cutter Note: Some of the above items may require 595TF a freighttapered lead time. Product depictions areflush not tocut, scale. Broken shelf packs attract a 5% Surcharge. Small head for cutting application in dense working areas. 301856 INSIDE PAGES.indd 37 Model/Order No. 595T Tungsten Carbide blades, piano wire 0,4 mm, medium hard wire 0,8 mm, hard wire 0,6 mm, Cu 1,5 mm, Description 115 mm, 67 g Side cutter semi flush cut, Note: For all side cutters series 110 500, mm,600 48and g 2400. A Wire definitions see p. 22 582EW flush cut, small tapered same as 582E but wirh medium hard wire 0,6 622N Side cutter67flush 115 mm, g cut, sm Side Cutters – tapered head Price (€) medium hard wirein0,8d Small tapered head for cutting application 595T 102,00 1 110 mm, 48 g 593AE Tip cutter flush cut 30° Model/Order No. Description cut on flush densecut, PCB ESD SAFE 622NA Sidepins cutter medium hard wire medium hard wire 0,4 0,7 632N Side mm, cutter super full fl 115 110 mm, 68 48 gg 103,00 medium hard wire 0,7 Prices herein do not include GST. 37 110 mm, 48 g 575E Tip cutter flush cut 45° Price (€) 10/01/14 12:16 PM for dedicate work on h 102,00 108,00 50,00 Pliers Pliers Pliers Pliers Description Material No. Pliers – high grade tool steel, anti-glare finish, ESD safe Pliers for miniature and standard electronics Pliers – high grade tool steel, anti-glare finish, ESD safe Pliers – highESD-safe grade tool steel, anti-glare finish, ESD safe Special tool steel, non-reflecting surface, Model/Order No. Description High grade tool steel Model/Order No. Description 543E Round nose plier, with smooth jaws, very precise, Model/Order No. Description 543E Round nose plier, with smooth jaws, very precise, 120 mm, 67 very g with smooth jaws, very precise, 543E nose pliers, with smooth Round nose plier, Round jaws, 120 mm, 67 g precise, 120 mm, 67 g 120mm, 67g Price (€) Price (€) 43,50 Price (€) 43,50 543E 43,50 Shelf Pack 1 ESD SAFE Pliers 547 Needle nose plier, with smooth rounded jaws, very precise, 547 nose plier, with smooth Needle nose plier, Needle rounded jaws,with verysmooth prciese,rounded jaws, very precise, 120 laying mm,nose 67 gplier, 547 Needle with smooth rounded jaws, very precise, suitable for forming, bending, and 120 mm, 67 g feeding in wires 120mm, 67g 120 mm, 67 g 547 45,50 45,50 45,50 1 Erem ESD SAFE Pliers EROP Flat nose plier, with smooth jaws, 542E Flat nose plier, with smooth jaws, precise 542E radiused edges, Flat nose plier, with smooth jaws, precise radiused edges, 542E 67g Flat nose plier, with smooth jaws, 120mm,. precise radiused edges, 542E Pliers Series 2400 MagicSense – high grade tool steel, anti-glare finish, ESD safe 120 mm,radiused 67 g edges, precise 120 mm, 67 g 120 mm, 67 g Model/Order No. Description 2411P Needle nose pliers with smooth rounded jaws, very precise, Cutters and Pliers Pliers Series 2400 MagicSense 531E Flat mm nose plier, Nylon inserts to prevent nicking 146 531E Flat nose plier, Nylon inserts to prevent nicking 125 mm, 67 g Nylon inserts to prevent nicking 531E Flat nose plier, Pliers for miniature and standard electronics 125 mm, 67 g 125 mm, 67 g Pliers Series for 2400 MagicSense – high grade tool steel, anti-glare finish, ESD safe Optimized ergonomically shaped handles increased comfort Special tool steel, non-reflecting surface, ESD-safe Pliers Model/Order No. Description 2411PD Needle nose pliers, same as 2411P, 2411P Needle nose pliers with Needle nose pliers with smooth rounded jaws. but inside serrated tips, smooth rounded jaws, Model/Order Description very precise, very 544Eprecise, No. Chain nose plier, with smooth jaws, 146 mm 544E Chain nose plier, with smooth jaws, 146mm EROP172 Round nose plier, burnished, safe, 146 120 mm mm, 67plier, g with 544E Chain nose smoothESD jaws, 120 mm, 67 g 125 120 mm, mm, 63 67 gg EROP Pliers Flat nose pliers with smooth 2442P Flatjaws, nose pliers with smooth jaws, 2411PD Needle radiused nose pliers, same as 2411P, precise radiused edges, precise edges, 146mm but inside serrated tips, 544D Chain nose plier, with jaws, 146 mmnose plier, with smooth 544D Chain smooth jaws, EROP Needle noseplier, plier,with burnished, safe, 146 mm inside serrated, 544D 174 Chain nose smoothESD jaws, inside serrated, 120 mm, 66 g 125 mm, 67 g inside serrated, 125 mm, 67 g 125 mm, 67 g 2443P Round nose pliers with smooth jaws, 2442P Flat nose pliers smooth jaws, very precise, for with bending wires, precise 146 mmradiused edges, 146 mm EROP277 Needle nose plier, burnished, ESD safe, Needle nose plier, burnished, ESD safe, 140mm, 90g 140 mm, 90 g Forming Tools EROP280 Price (€) 43,00 62,00 62,00 62,00 Price (€) 48,00 2411P 43,00 Price (€) 44,50 44,50 19,00 44,50 1 ESD SAFE 48,00 ESD SAFE 1 46,50 46,50 19,00 46,50 45,00 43,00 EROP27719,00 ESD SAFE Round nose pliers with smooth jaws, very precise, for bending wires, 146 mmnose plier, burnished, ESD safe, Needle 170 mm, 113 g 1 45,00 26,50 Safe bending, forming and preparation of component connections For Passive Components – high grade tool steel, anti-glare finish, ESD safe High grade tool steel Non-reflecting surface ESD-safe Model/Order No. Description 554E Pre-forming tool,ESD u-shape EROP170 Flat nose plier, burnished, safe, max. 65 mm, Suitable for component connections, u-shape capacitors 0,7 mm, resistors 1/2 W, 120 mm, 63 g 120mm, 70g 120 mm, 70 g 40 Pliers 40 Pliers 40 Pliers 1 ESD SAFE 2442P 43,00 Pre-Forming Tools 2443P 44,00 44,00 44,00 Price (€) 55,50 19,00 1 50,00 19,00 1 554E R=2mm Suitable for connections, Flat nose plier, 554A Pre-forming tool,ESD u-shape EROP171 burnished, safe, transverse, u-shape, axial forming max. 65 mm, head width 4 mm, 120 mm, 67 g Narrow head shape 120 mm, 70 g 554A R=1.5mm 554TX 38 Pre-forming tool, double u-shape simultaneously, 95,00 max. 65 mm, head width 2,5 mm, 120 mm,are 70not g to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. Note: Some of the above items may require a freight lead time. Product depictions 301856 INSIDE PAGES.indd 38 10/01/14 12:16 PM INDEX - BY MATERIAL NUMBER - ALPHA NUMERIC ORDER Material Number Page No. AASA ...............................34 CT5A7 .............................31 CT5A8 ..............................31 CT5AA6 ...........................31 CT5AA7 ...........................31 CT5AA8 ...........................31 CT5B8 .............................31 CT5BB6 ...........................31 CT5BB7 ...........................31 CT5C6 .............................31 CT5C7 .............................31 CT5C8 .............................31 CT5CC6 ...........................31 CT5CC7 ...........................31 CT5CC8 ...........................31 CT5D7 .............................31 CT5D8 .............................31 CT5DD7 ...........................31 CT5DD8 ...........................31 CT5E7 .............................31 CT5EE7 ...........................31 CT6C6 .............................32 CT6C7 .............................32 CT6C8 .............................32 CT6D6 .............................32 CT6D7 .............................32 CT6E6 .............................32 CT6E7 .............................32 CT6E8 .............................32 CT6F6 ..............................32 CT6F7 ..............................32 CT6F8 ..............................32 DS103 ..............................30 DS110 ..............................30 DS112 ..............................30 DS113 ..............................30 DS114 ..............................30 DS116 ..............................30 EROP277 ........................38 ETA ..................................24 ETAA ................................24 ETB ..................................24 ETBB ...............................24 ETC .................................24 ETCC ...............................24 ETD .................................24 ETDD ...............................24 ETGW ..............................24 ETh .................................24 ETK ..................................24 ETL ..................................24 ETM .................................24 ETO .................................24 ETP ..................................24 ETR .................................24 ETT ..................................24 ETuB ...............................24 LTA ...................................25 LTAS ................................25 LTAX ................................25 LT1 ...................................25 LT1L .................................25 LT1LX ..............................25 LT1S ................................25 LT1SLX ............................25 LT1X ................................25 LT4Au ..............................25 LT4X ................................25 LTB ..................................25 LTC ..................................25 LTCS ................................25 LTD ..................................25 LTF ...................................25 LTGW ...............................25 LTh ..................................25 LTHX ................................25 Material Number Page No. LTK ..................................25 LTKN .................................25 LTL ...................................25 LTM ..................................25 LTS ..................................25 NTA ..................................26 NTAX ...............................26 NTB .................................26 NTC .................................26 NTD .................................26 NTGW ..............................26 NTh .................................26 NTK .................................26 NT1 ..................................26 NT1S ...............................26 NT1SC .............................26 NT1X ...............................26 NT4 ..................................26 NT6 ..................................26 OOSA ..............................34 PES51 ...............................8 Ph1201 ............................12 Ph12100 ..........................12 Ph1260 ............................12 Ph50 ................................12 PSI1 .................................30 PSI10 ...............................30 PSI2 .................................30 PSI3 .................................30 PSI4 .................................30 PSI5 .................................30 PSI6 .................................30 PSI7 .................................30 PSI8 .................................30 PSI9 .................................30 PTA6 ................................23 PTAA6 ..............................23 PTAA7 ..............................23 PTAA8 ..............................23 PTA7 ................................23 PTA8 ................................23 PTBB7 .............................23 PTBB8 .............................23 PTB7 ................................23 PTB8 ................................23 PTCC7 .............................23 PTCC8 .............................23 PTC6 ...............................23 PTC7 ...............................23 PTC8 ...............................23 PTDD7 .............................23 PTD7 ...............................23 PTD8 ...............................23 PTE8 ................................23 PTF7 .................................23 PTh6 ...............................23 PTh7 ...............................23 PTh8 ...............................23 PTK7 ................................23 PTK8.................................23 PTL7 ................................23 PTL8 ................................23 PTM7 ...............................23 PTM8 ...............................23 PTO7 ...............................23 PTO8 ...............................23 PTP7 ................................23 PTP8 ................................23 PTR6 ...............................23 PTR7 ...............................23 PTR8 ...............................23 PTS6 ................................23 PTS7 ................................23 PTS8 ................................23 SSSA ...............................34 TC201 ..............................12 Material Number Page No. TC201B ...........................12 TCP50M ..........................12 TETS ...............................24 T0051176799 ..................32 T0051314000 ..................31 T0051314100 ..................31 T0051314200 ..................31 T0051314300 ..................31 T0051314400 ..................31 T0051314500 ..................31 T0051314600 ..................31 T0051314700 ..................31 T0051314800 ..................31 T0051315000 ..................31 T0051315100 ..................31 T0051315200 ..................31 T0051317199 ..................10 T0051317399 ..................10 T0051317499 ..................10 T0051317799 ..................11 T0051317899 ..................11 T0051318399 ....................9 T0051319099 ....................9 T0051319899 ....................9 T0051320199 ..................11 T0051320299 ..................11 T0051351300 ..................30 T0051352700 ..................30 T0051355000 ..................30 T0051379099 ..................31 T0051382499 ..................13 T0051502699 ..................13 T0051512199 ..................12 T0051512599 ..................13 T0051515599 ..................11 T0051516199 ..................12 T0051516399 ..................12 T0052242099 ..................13 T0052711599 ..................10 T0052711699 ..................10 T0052711799 ..................10 T0052711899 ..................10 T0052917099 ....................9 T0052917199 ..................10 T0052918099 ....................8 T0052918199 ....................8 T0052918599 ..................19 T0052918699 ..................19 T0052918999 ....................9 T0052919099 ..................10 T0052919399 ....................9 T0052919499 ....................9 T0052919999 ....................9 T0052920099 ....................9 T0052920199 ..................11 T0052920299 ..................11 T0052920399 ..................11 T0052920499 ..................11 T0052920599 ..................11 T0052920699 ..................11 T0052921199 ..................11 T0052921299 ..................11 T0052921599 ....................8 T0052921699 ....................8 T0053124699 ..................13 T0053171699 ..................15 T0053277599 ....................6 T0053313399 ..................10 T0053366699 ..................15 T0053370699 ..................16 T0053371599 ..................11 T0053637199 ..................22 T0053639599 ..................19 T0053650599 ..................20 T0053651699 ..................20 T0053657199 ..................20 Material Number Page No. T0054240799 ..................32 T0054240899 ..................32 T0054241799 ..................32 T0054241899 ..................32 T0054242899 ..................32 T0054414199 ..................28 T0054414399 ..................28 T0054414499 ..................28 T0054414699 ..................28 T0054414799 ..................28 T0054415399 ..................28 T0054445099 ..................27 T0054445199 ..................27 T0054445299 ..................27 T0054445599 ..................27 T0054460199 ..................27 T0054460299 ..................27 T0054460399 ..................27 T0054460499 ..................27 T0054460599 ..................27 T0054460699 ..................27 T0054460799 ..................27 T0054460899 ..................27 T0054460999 ..................27 T0054461099 ..................27 T0054461199 ..................27 T0054461299 ..................27 T0054461399 ..................27 T0054465199 ..................26 T0054465299 ..................26 T0054465399 ..................26 T0054465499 ..................26 T0054470199 ..................24 T0054470299 ..................24 T0054470399 ..................24 T0054470499 ..................24 T0054470599 ..................24 T0054470699 ..................24 T0054470799 ..................24 T0056107599 ..................12 T0058706794 ..................31 T0058727772 ..................32 T0058727773 ...................32 T0058735884 ..................22 T0058744845 ..................25 T0058744846 ..................25 T0058761728 ..................10 T0058762701 ..................22 WAR54 ............................29 WAR55 ............................29 WD1000Au ........................4 WD1000hPTAu .................5 WD1000MAU .....................5 WD1000TAu ......................4 WD1Au ..............................4 WD1MAU ...........................5 WD2000MAU .....................5 WD2MAU ...........................5 WES51D ............................4 WESD51DAu ....................4 WFE2XKIT1AU ................20 WhC0150 ........................28 WhC0152 ........................ 28 WhC50 ............................29 WhC51 ............................29 WhC52 ............................29 WhC53 ............................29 WhC54 ............................28 WhC55 ............................28 WPA2 ...............................13 WPB1 ..............................13 WPT01 .............................28 WPT02 .............................28 WPT03 .............................28 WPT04 .............................28 WPT1 ...............................29 Material Number WPT10 .............................29 WPT11 .............................29 WPT12 .............................29 WPT13 .............................29 WPT14 .............................29 WPT15 .............................28 WPT16 .............................28 WPT2 ...............................29 WPT3 ...............................29 WPT4 ...............................29 WPT5 ...............................29 WPT7 ...............................29 WPT8 ...............................29 WPT9 ...............................29 WR2Au ............................14 WR2000AAu ...................14 WR2000DAu ...................14 WR2002Au ......................14 WR3000MAU ...................15 WSTA3 .............................13 WSTA5 .............................13 WSTA6 .............................13 WX1AU ..............................6 WX1010AU ........................6 WX1011AU ........................6 WX1012AU ........................6 WX2AU ..............................6 WX2020AU ........................6 WX2021AU ........................7 WXD2AU ...........................7 WXD2010AU .....................7 WXD2020AU .....................7 W100D .............................12 W60D ...............................12 15AGW ............................35 2ASA ...............................34 20AS ................................34 24SA ................................35 2411P ..............................38 2432E ..............................36 2442P ..............................38 249SA ..............................24 258SA ..............................35 3CBS ...............................35 3CSA ...............................34 3CSASL ...........................34 30SA ................................35 5ASA ...............................35 5ASASL ...........................35 5SA ..................................35 512N ................................37 522N ................................37 542E ................................38 543E ................................38 547 ...................................38 554A ................................38 554E ................................38 572E ................................37 595T ................................37 599T ................................37 7SA ..................................35 7SASL .............................35 720101Au ........................29 720102 .............................29 720103 .............................29 720105..............................29 720106 .............................29 720107Au ........................29 720113 .............................29 720151 .............................29 720152 .............................29 720153 .............................29 776E ................................36 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 39 Page No. 39 10/01/14 12:16 PM APEX TOOL GROUP - CUSTOMER SUPPORT HEAD OFFICE Sales Phone: 02 6021 6666 Sales Fax: 1800 021 940 Sales E-Mail: [email protected] Apex Tool Group Pty Ltd 519 Nurigong Street PO Box 366 ALBURY NSW 2640 ALBURY NSW 2640 Phone: 02 6058 0300 Fax: 02 6021 7403 Email: [email protected] Web: www.apextoolgroup.com.au REGIONAL SALES TEAM & AGENTS NSW DONN TRAYLEN Regional Sales Manager Mobile: 0457 750 475 [email protected] IAN BROWN Sales Supervisor Mobile: 0417 028 221 Fax: 02 9648 1990 [email protected] PAUL GROSS Sales Supervisor Mobile: 0408 666 478 [email protected] GEOFF NELSON Sales Supervisor Mobile: 0418 478 086 Fax: 02 4920 8936 [email protected] MARK LINDNER Sales Supervisor Mobile: 0418 475 804 [email protected] WARWICK STONE Sales Supervisor Mobile: 0417 028 088 Fax: 07 3264 5258 [email protected] RAYMOND CHRISTENSEN TAMBAR PTY LTD Phone: 07 4774 5124 Fax: 07 4774 5292 Mobile: 0418 771 098 QLD PETER HANNAN Regional Sales Manager Mobile: 0419 282 426 Fax: 07 3324 8847 [email protected] [email protected] VIC BRIAN KIDD Regional Sales Manager Mobile: 0419 289 557 [email protected] LISA COTTON Sales Supervisor Mobile: 0419 293 611 [email protected] JASON KEMP Sales Supervisor Mobile: 0418 471 297 [email protected] MICHAEL MANNING Sales Supervisor Mobile: 0448 063 489 [email protected] BRETT RAPONI Regional Manager Mobile: 0419 293 909 Fax: 08 9272 3903 [email protected] GILLIAN BRAIN Sales Supervisor Mobile: 0438 681 704 Fax: 08 9272 3903 [email protected] GRAHAM DOOLAN Sales Supervisor Mobile: 0418 476 179 Fax: 08 9272 3903 [email protected] TAS NT KATINA STOTT Sales Supervisor Mobile: 0419 291 763 [email protected] LEW PRETORIUS L & J PRETORIUS PTY LTD Phone: 03 6344 2686 Fax: 03 6344 7220 Mobile: 0438 131 669 [email protected] TERRITORY HARDWARE AGENCIES GREG MELVILLE Phone: 0417 887 280 WA APEX TOOL GROUP 52 Clavering Rd BAYSWATER WA 6053 Phone: 08 9370 3377 Fax: 08 9272 3903 SA CHRIS HERMAN Regional Sales Manager Mobile: 0419 295 033 [email protected] NEW ZEALAND FIJI AARON BELL TOOLWARE SALES LIMITED ARSHAD DAUD MIDLINK MARKETING 19 Ackland Street, Vatuwaqa, SUVA, FIJI Phone: (+679) 338 6300 Fax: (+679) 338 6290 Mobile: (+679) 992 9227 3 Stonedon Drive EAST TAMAKI, AUCKLAND, 2013 NEW ZEALAND Phone: (+649) 579 8080 Fax: (+649) 579 1166 [email protected] NOLAN CALDWELL Phone: 0418 892 371 [email protected] [email protected] PATRICK McINTOSH Manager, Business Development & Key Accounts Mobile: 0418 673 361 [email protected] STUART NAYLOR Manager, Business Development & Key Accounts Mobile: 0418 476 655 [email protected] ELECTRONICS BUSINESS DEVELOPMENT MICHAEL NAISSEN Product Engineer / Professional Tools Phone: 02 6058 0300 Fax: 02 6021 7403 michael.naissen@ apextoolgroup.com JEFFREY BECKER Manager, Business Development & Key Accounts Mobile: 0417 520 400 [email protected] 40 [email protected] [email protected] Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 301856 INSIDE PAGES.indd 40 10/01/14 12:16 PM 301856 COVER ART.indd 3 10/01/14 12:14 PM Electronics Prod Catalogue 2014 cover.pdf 1 19/12/2013 4:23:34 PM 301856 COVER ART.indd 4 10/01/14 12:14 PM