Transcript
HDBaseT
HDBaseT HDMI Extenders & Receivers (328 ft/100 m) HDBT-SET-1 (HDBT-1-E + HDBT-1-R) • • • • •
HDCP compliant HDBaseT extender and receiver Set Extend HDMI signals up to 328 feet (100 meters) Supports HDMI and DVI formats; UHD@60Hz (4:2:0), 1080P, HD, 3D Full audio support, infraRed and RS232 control Uses a single CATx cable
HDBT-1-E Front
Rear
HDBT-1-R Front
Rear
Recommended cables: CAT5 - Belden 1212F, CAT6 - Belden 2412F MODEL DESCRIPTION INPUTS OUTPUTS
Single-port HDBaseT HDMI Extender
HDBT-1-R Single-port HDBasT HDMI Receiver 1 x HDMI, 1 x RS232 1 x RJ45, 1 x IR Emitter
RESOLUTION
Maximum Resolution of UHD @ 60 Hz (4:2:0) / 1920 x 1200 (including 1080P and 3D) up to 328 feet (100 meters)
DIMENSIONS
122 mm W x 74 mm D x 29 mm H
POWER
6
HDBT-1-E
12V 2.5A
HDBaseT HDMI Extenders & Receivers w/POE/Ehternet HDBT-SET-2 (HDBT-1-Ex + HDBT-1-Rx) (328 ft/100 m) • • • • • •
HDCP compliant HDBaseT extender and receiver Set with 4 x 10/100 Ethernet ports on both Tx and Rx Extend HDMI signals up to 328 feet (100 meters) Supports POE (Power Over Ethernet) from Tx to Rx Supports HDMI and DVI formats; UHD@60Hz (4:2:0), 1080P, HD, 3D Full audio support, infraRed and RS232 control Uses a single CATx cable
HDBT-1-Ex
HDBT-1-RX Front
HDBT-1-EX Front
HDBT-1-RX
HDBT-1-EX Rear
HDBT-1-RX Rear
HDBT-1-RX Front
Recommended cables: CAT5 - Belden 1212F, CAT6 - Belden 2412F MODEL
HDBT-1-Ex
HDBT-1-Rx
DESCRIPTION
Single-port HDBaseT HDMI Extender with IR, RS232, Ethernet, POE
Single-port HDBaseT HDMI Receiver with IR, RS232, Ethernet, POE
INPUTS
1 1 4 1
1 4 1 1
OUTPUTS
1 x RJ45 (Link) 1 x HDMI (Bypass) 1 x IR Out (3.5 mm Jack for Emitter)
x x x x
HDMI RS232 RJ45 (10/100 Base T Ethernet) IR (3.5 mm Jack)
x x x x
RJ45 (Link) RJ45 (10/100 Base T Ethernet) Direct IR Receiver (On Top) Extended IR Receiver (3.5 mm Jack)
1 x HDMI 1 x RS232
RESOLUTION
Maximum Resolution of UHD @ 60Hz (4:2:0) / 1920 x 1200 (including 1080P and 3D) up to 330 feet (100 meters)
DIMENSIONS
140 mm W x 114 mm D x 29 mm H
POWER
DC 48 V
POE
7
HDBaseT
HDBaseT HDMI Extenders & Receivers (230 ft/70 m) HDBT-SET-3 (HDBT-1-Es + HDBT-1-Rs) • • • • •
HDCP compliant HDBaseT extender and receiver Set Extend HDMI signals up to 230 feet (70 meters) Supports HDMI and DVI formats; 1080P, HD, 3D Full audio support, infraRed and RS232 control Uses a single CATx cable
HDBT-1-Es Front Front
Rear Rear
HDBT-1-Rs Front
Rear
Recommended cables: CAT5 - Belden 1212F, CAT6 - Belden 2412F MODEL DESCRIPTION INPUTS OUTPUTS
HDBT-1-Es Single-port HDBaseT HDMI Extender
HDBT-1-Rs Single-port HDBasT HDMI Receiver 1 x HDMI, 1 x RS232 1 x RJ45, 1 x IR Emitter
RESOLUTION
Maximum Resolution of 1920 x 1200 (including 1080P and 3D) up to 230 feet (70 meters)
DIMENSIONS
122 mm W x 74 mm D x 29 mm H
POWER
8
12V 2.5A
HDBaseT HDMI Extenders & Receivers (330 ft/100 m) w/ POE HDBT-SET-4 (HDBT-1-EAP + HDBT-1-RAP) • • • • • •
HDCP compliant HDBaseT extender and receiver Set Extend HDMI signals up to 328 feet (100 meters) Supports assignable POE (Power Over Ethernet) from Tx to Rx or Rx to Tx Supports HDMI and DVI formats; UHD@60Hz (4:2:0), 1080P, HD, 3D Full audio support, infraRed and RS232 control Uses a single CATx cable HDBT-1-RAP
HDBT-1-EAP RS-232 RS-232
DCfor forPOE POE HDMI HDMIInIn HDMI HDMILink LinkOut Out4848DC Bypass Bypass
IRIROUT OUTIRIRININ GPIO GPIO
4848DC DCfor forPOE POE
RS-232 RS-232
IRIROUT OUTIRIRININ GPIO GPIO
LED LEDStatus Status Indicators Indicators
LED LEDStatus Status Indicators Indicators
Recommended cables: CAT5 - Belden 1212F, CAT6 - Belden 2412F MODEL
HDBT-1-EAP
HDBT-1-RAP
DESCRIPTION
Single-port HDBaseT HDMI Extender with IR, RS232, GPI and assignable POE
Single-port HDBaseT HDMI Receiver with IR, RS232, GPI and assignable POE
INPUTS
1 1 1 1
1 x RJ45 (Link) 1 x Direct IR Receiver (On Top) 1 x Extended IR Receiver (3.5 mm Jack)
OUTPUTS
1 x RJ45 (Link) 1 x HDMI (Bypass) 1 x IR Out (3.5 mm Jack for Emitter)
x x x x
HDMI RS232 IR (3.5 mm Jack) Terminal Block for GPI In
1 x HDMI 1 x RS232 1 x Terminal Block for GPI Out
RESOLUTION
Maximum Resolution of UHD @ 60Hz (4:2:0) / 1920 x 1200 (including 1080P and 3D) up to 330 feet (100 meters)
DIMENSIONS
122 mm W x 74 mm D x 38 mm H
POWER
DC 48 V or POE
DC 48 V or POE
9
HDBaseT
HDBaseT HDMI Extenders & Receivers w/ POE/vga input HDBT-SET-5 (HDBT-1-EAPv-II + HDBT-1-RAP) (330 ft/100 m) • • • • • • • •
Single port HDBaseT extender and receiver Set Supports VGA input as well as HDMI input HDMI loop out Extend HDMI signals up to 328 feet (100 meters) Supports assignable POE (Power Over Ethernet) from Tx to Rx or Rx to Tx Supports HDMI and DVI formats; UHD@60Hz (4:2:0), 1080P, HD, 3D Supports VGA inputs up to 1920x1200 with analog audio input Full audio support, infraRed and RS232 control HDBT-1-RAP
HDBT-1-EAPv-II AUDIO IN
VGA INPUT
HDMI HDMI IN LOOP OUT
48 DC for POE
RS-232
HDMI In
IR OUT IR IN
Input Select
RS-232
HDMI Link Out 48 DC for POE Bypass
GPIO
LED Status Indicators
Video IR OUT IR IN LED Status Indicators Priority
Recommended cables: CAT5 - Belden 1212F, CAT6 - Belden 2412F MODEL
Switchable VGA w/Audio) or HDMI HDBaseT Extender with IR, RS232`
INPUTS
1 1 1 1 1
OUTPUTS
1 x RJ45 (Link) 1 x HDMI Loop out 1 x IR Out (3.5 mm Jack for Emitter)
RESOLUTION DIMENSIONS POWER
10
HDBT-1-EAPv-II
DESCRIPTION
x x x x x
HDMI VGA with analog audio RS232 IR (3.5 mm Jack) Terminal Block for switch
HDBT-1-RAP Single-port HDBaseT HDMI Receiver with IR, RS232, GPI and assignable POE 1 x RJ45 (Link) 1 x Direct IR Receiver (On Top) 1 x Extended IR Receiver (3.5 mm Jack) 1 x HDMI 1 x RS232 1 x Terminal Block for GPI Out
Maximum Resolution of UHD @ 60Hz (4:2:0) / 1920 x 1200 (including 1080P and 3D) up to 330 feet (100 meters) 140 mm W x 114 mm D x 37.5 mm H DC 48 V
122 mm W x 74 mm D x 38 mm H POE
