22 Cutting Tools

Transcript

Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com SECTION 22 SECTION INDEX Cutting Tools CENTEr Keys ......................................................22-31 AUGEr Bit, Extensions .......................................22-1 Hand Brace Auger...................................22-2 Impact Wrench Bit...............................22-2–3 Power Drill Bit ..........................22-1–3, 22-19 Ship Bit ....................................22-1–3, 22-19 Utility Pole Bit ..........................................22-2 CHUCkS Micro .....................................................22-22 ASPHALT Cutter ....................................................22-52 bAND SAW Blade Characteristics ............................22-42 Blade Selection Variables .....................22-42 Blade, Materials ....................................22-43 Blades, Portable.........................22-19, 22-44 bLADE Band Saw ............................22-19, 22-42–44 Combination - Carbide...............22-49, 22-56 Deck - Carbide ......................................22-49 Diamond ............................................22-4–10 Emergency ............................................22-50 Finishing - Carbide ................................22-49 Framing - Carbide .................................22-50 General Purpose - Carbide ...................22-49 Hacksaw, Hand ..........................22-15, 22-40 Power.........................................22-19, 22-40 Jigsaw...........22-14–15, 22-40–41, 22-45–46 Miter Box Saw .......................................22-50 Nail Cutting............................................22-50 Non-Ferrous...............................22-50, 22-56 Plastic....................................................22-56 Plastic /Hardwoods................................22-51 Precision Finishing - Carbide ................22-49 Radial Arm Saw ....................................22-50 Reciprocating Saw .........................22-12–13, ......................................22-40–41, 22-45–46 Rip .........................................................22-50 Roofer’s Special ....................................22-50 Sawzall Blades...............................22-12–13, ......................................22-40–41, 22-45–46 Steel Cutting .................22-12–13, 22-40–41, ............................................22-45–46, 22-57 Table......................................................22-50 bODY DrILLS.........................................22-31 brAD Point Drill Bits..........................................22-3 brEAkEr, PNEUMATIC Tool Steel.........................................22-52–53 brIDGE Reamers................................................22-35 bULL Points ....................................................22-52 bUrrS Carbide............................................22-46–49 Non-Ferrous ....................................22-47–48 CAr Reamers................................................22-35 CArbIDE TIPPED Drills ................................................22-33–34 Holesaw ....................22-18, 22-45, 22-53–54 Masonry Bits ...................................22-51–53 CASES/INDExES For Cutting Tools ...................................22-21 CHUCkING Reamers..........................................22-34–35 CIrCULAr Saw Blades....................22-49–50, 22-55–57 CObALT Combined Drill and Countersink ....22-31–32 Drills .....................................22-23, 22-25–29 COMbINED DrILL AND COUNTErSINk ...............................22-31–32 CONCrETE Breaker Tool Steel ...........................22-52–53 COrE bITS Carbide..................................................22-52 Diamond ..........................................22-10–11 COUNTEr SINk AND DEbUrrING TOOL ...............................22-32 COUNTEr SINkS ..................22-20, 22-32–33 CUTTING Fluid, Metals....................................22-54–55 DIAMOND Application/Codes/Grading .....................22-4 Asphalt Blades ........................................22-5 Asphalt Over Concrete Blades................22-5 Coring Bits .......................................22-10–11 Crack Chasing Blade ..............................22-9 Cup Grinders...........................................22-9 Cured Concrete Blades.......................22-4–8 Diamond Wire and Beads .......................22-6 Dry Cutting Blades ............................22-6–10 Dry/Wet Cutting Blades ...............22-8, 22-10 Electric Saws Blades ..............................22-8 Floor Grinding Heads ..............................22-6 Green Concrete Blade ............................22-5 Grinding and Grooving Wet Blades ........22-6 Hand Saw Blades ...............................22-5–6 Refractory Blades....................................22-6 Segmented Dry High Speed Blades ...22-6–7 Tile Blades.............................................22-10 Tuck Pointing Blades ..............................22-9 Tuck Pointing Pins ..................................22-9 Turbo Blades .......................................22-7–8 Wall Saw Blades .................................22-5–6 Wet Blades...............................22-4–5, 22-10 DIES Hex Rethreading ...................................22-39 Pipe Rethreading ............................22-38–39 Round Rethreading .........................22-38–39 DrILLS Aircraft ...................................................22-29 Body Drills .............................................22-31 Carbide Tipped................................22-33–34 Combined Drill and Counter Sinks ..............................................22-31–32 Drifts ......................................................22-31 Electric Hammer Drill ......................22-51–53 Extra Length..........................................22-29 Gauge ...................................................22-21 Jobber Length......................22-22–25, 22-33 Left Hand.........................................22-25–26 Masonry - Rotary Hammer..............22-51–53 WWW.HANESSUPPLY.COM Millimeter ...............................................22-25 Parabolic Flute ......................................22-24 Reduced Shank .........................22-28, 22-34 Screw Machine ....................22-26–27, 22-31 Sets .......................................................22-20 Sheeters ................................................22-31 Slow Spiral ......................................22-23–24 Stands ...................................................22-21 Taper Length...................22-24, 22-27, 22-33 Taper Shank.........................22-29–30, 22-34 DrILLS, MASONrY Core Bits (Carbide) ...............................22-52 Hammering Tools ............................22-52–53 Screw Type Drill (Tapcon®)....................22-52 SDS+ Adapters .....................................22-51 SDS+ Drills............................................22-51 SDS Max Adapters................................22-51 SDS Max Drills ......................................22-51 Spline ....................................................22-51 Straight Shank.......................................22-52 Tanged (Tapcon®) ..................................22-52 Tapcon® (Screw-Type)...........................22-52 ELECTrIC Breakers Tool Steel .........................22-51–53 Core Bits (Carbide) ...............................22-52 Hammers Tool Steel ........................22-51–53 END MILLS........................................22-39–40 ExTrACTOrS Screw .........................................22-21, 22-37 FOrSTNEr Bit Extension ...........................................22-3 GAUGE Drill ........................................................22-21 HACkSAW Frame ....................................................22-15 Hand Blade ................................22-15, 22-40 Power Blades.............................22-19, 22-40 HAMMEr, rOTArY Core Bits (Carbide) ...............................22-52 Tool Steel.........................................22-51–53 HAND TAPS Eight Pitch .............................................22-37 Extensions.............................................22-37 Hand................................................22-35–36 Metric ....................................................22-36 Pipe .......................................................22-36 Sets .......................................................22-21 Special Threads ....................................22-37 Spiral .....................................................22-36 Standard ..........................................22-35–36 Titanium Nitride Coated .................22-35–36 Wrenches ..............................................22-37 HOLE SAWS Arbor/Adapters ...............22-17, 22-44, 22-54 Bi-Metal................................22-16, 22-44–45 Brazed Carbide ...............................22-53–54 Carbide Tipped ..........................22-18, 22-45 Diamond (Masonry)...............................22-11 Kits .......................................22-17, 22-44–45 Metal Cutting ..................................22-53–54 Plastic/Stucco Cut .................................22-54 Tub, Tile & Spa Cut ...............................22-54 Tungsten Carbide Grit ...............22-18, 22-46 Wood/Fiberglass ...................................22-54 – continues – 22 - A 22 Cutting Tools AIr CrAFT Drill ........................................................22-29 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com SECTION INDEX Cutting Tools 22 SECTION 22 Cutting Tools INDExES Cutting Tools .........................................22-21 JIGSAW bLADES Application/Blade Chart .......22-14–15, 22-41 Bayonet Shank ..........................22-15, 22-41 Bosch Shank..............................22-41, 22-46 Tungsten Carbide............................22-45–46 Universal Shank .............22-14, 22-41, 22-46 MASONrY Core Bits ...............................................22-52 Hammering Tools (SDS+, SDS-Max, Spline, 3/4" Hex) ..........22-52–53 Rebar Cutters........................................22-53 Screw Type Drill ....................................22-52 SDS+ Drills............................................22-51 SDS+ Adapters .....................................22-51 SDS-Max Drills......................................22-51 SDS-Max Adapters................................22-51 Spline Drills ...........................................22-51 Straight Shank Drills..............................22-52 Tanged (Tapcon®) drills..........................22-52 Tapcon® (Screw-Type) Drills..................22-52 METrIC Combination Drill and Countersink ......22-32 Dies .................................................22-38–39 Drills..........................22-25, 22-28, 22-28–30 Tap and Die Sets ..................................22-38 Taps.......................................................22-36 MICrO Drills ......................................................22-22 Chuck ....................................................22-22 MOrSE TAPEr Drills ................................................22-29–30 Extension Sockets.................................22-31 Sleeves .................................................22-31 Solid Sockets ........................................22-31 PADDLE bITS ...........................................22-1 PArAbOLIC FLUTE Drills ........................................................B-24 PAvING Breaker Tool Steel ...........................22-52–53 PIN Chuck Set..............................................22-22 PIPE Dies .................................................22-38–39 Taps.......................................................22-36 PLASTIC/STUCCO Holesaw ................................................22-54 PvC Hand Saw..............................................22-16 rEAMErS Aligning .................................................22-35 Bridge ....................................................22-35 Car ........................................................22-35 Center ...................................................22-32 Chucking .........................................22-34–35 Hand......................................................22-35 rEbAr Cutter ....................................................22-53 rECIPrOCATING Blades...........22-12–13, 22-40–41, 22-45–46 rETHrEADING Dies .................................................22-38–39 22 - B rOTArY HAMMEr STEEL Asphalt Cutter .......................................22-52 Bull Point ...............................................22-52 Bushing Tools........................................22-53 Clay Spades ..........................................22-52 Cold Chisels ..........................................22-53 Core Bits (Carbide) ...............................22-52 Ground Rod Driver ................................22-53 Hammering Tools ............................22-52–53 Moil Point ..............................................22-52 Mortar Chisel.........................................22-53 Rebar Cutters........................................22-53 Scaling Chisel .......................................22-52 Screw Type Drill (Tapcon®)....................22-52 SDS+ Adapters .....................................22-51 SDS+ Drills............................................22-51 SDS-Max Adapters................................22-51 SDS-Max Drills......................................22-51 Slotting Chisel .......................................22-52 Spline ....................................................22-51 Straight Shank.......................................22-52 Tanged (Tapcon®) ..................................22-52 Tapcon® (Screw-Type)...........................22-52 rOUND DIE STOCk Wrench ..................................................22-37 rOUTEr Bits ......................................................22-3–4 SAW Close Quarter........................................22-16 Hack Saw ..............................................22-15 PVC/ABS Plastic ...................................22-16 Trifold ....................................................22-15 SAW bLADES Band Saw ............................22-19, 22-42–44 Combination-Carbide .................22-49, 22-56 Deck - Carbide ......................................22-49 Diamond ............................................22-4–10 Emergency ............................................22-50 Finishing - Carbide ................................22-49 Framing - Carbide .................................22-50 General Purpose - Carbide ...................22-49 Hacksaw Hand...........................22-15, 22-40 Hacksaw Power .........................22-19, 22-40 Jigsaw...........22-14–15, 22-40–41, 22-45–46 Miter Box Saw .......................................22-50 Nail Cutting............................................22-50 Non-Ferrous...............................22-50, 22-56 Plastic/Hardwoods Cutting ....................22-56 Plastic Cutting .......................................22-51 Precision Finishing - Carbide ................22-49 Radial Arm Saw ....................................22-50 Reciprocating Saw .........................22-12–13, ......................................22-40–41, 22-45–46 Rip .........................................................22-50 Roofer’s Special ....................................22-50 Sawzall Blades...............................22-12–13, .................................... 22-40–41, 22-45–46 Steel Cutting .................22-12–13, 22-40–41, ............................................22-45–46, 22-57 Table......................................................22-50 SAWS, HOLE Arbors/Adapters..............22-17, 22-44, 22-54 Bi-Metal................................22-16, 22-44–45 Brazed Carbide ...............................22-53–54 Carbide Tipped ..........................22-18, 22-45 Diamond (Masonry)...............................22-11 WWW.HANESSUPPLY.COM Kits .......................................22-17, 22-44–45 Metal Cutting ..................................22-53–54 Plastic/Stucco........................................22-54 Tub, Tile & Spa......................................22-54 Tungsten Carbide Grit ...............22-18, 22-46 Wood/Fiberglass ...................................22-54 SAWzALL bLADES.........................22-12–13, .......................................22-40–41, 22-44–45 SCrEW Extractors...................................22-21, 22-37 SDS+ ADAPTErS ...................................22-51 SDS+ DrILLS..........................................22-51 SDS-MAx ADAPTErS............................22-51 SDS-MAx DrILLS ..................................22-51 SETS Counter Sink .........................................22-20 Drill ........................................................22-20 Reamer .................................................22-21 Screw Extractor.....................................22-21 Tap ........................................................22-21 SHEETEr Drills ......................................................22-31 SILvEr AND DEMING Drills ...........................................22-28, 22-34 SPLINE DrIvE DrILLS ..........................22-51 TANGED (TAPCON®) DrILLS ................22-52 TAP AND DIE SETS ...............................22-38 TAPCON® (SCrEW-TYPE) DrILLS .......22-52 TAPEr Length Drills....................22-24, 22-27, 22-33 Shank Drill ...........................22-29–30, 22-34 TAPS Eight Pitch .............................................22-37 Extensions.............................................22-37 Metric ....................................................22-36 Pipe .......................................................22-36 Sets .......................................................22-21 Special Threads ....................................22-37 Spiral .....................................................22-36 Standard ..........................................22-35–36 Titanium Nitride Coated .................22-35–36 Wrenches ..............................................22-37 TUb, TILE & SPA Holesaw ................................................22-54 TUNGSTEN CArbIDE Holesaw .....................................22-18, 22-46 WOOD bOrING Auger Bits ................................22-1–3, 22-19 Forstner Bits............................................22-3 Paddle Bits ..............................................22-1 Self Feed Wood Bits ....................22-3, 22-19 WOOD/FIbErGLASS Holesaw ................................................22-54 WrENCH Round Die Stock ...................................22-37 Tap ........................................................22-37 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools American Tool® American Tool ® Short Ship Auger bits 7-1/2" OAL* 5" Twist • Short length allows bit to be used in tight areas WOOD bOrING TOOLS Speedbor2000® Wood boring bits • Drills through double studs • Allows for access in tight areas (between studs, inside cabinets) where standard length spade bits won’t fit • Drills a straight hole in tight areas Dia. (in) 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 Carded Stock # 87908 87910 87912 87914 87916 87920 87924 6" Speedbor2000® bits • General purpose length Dia. (in) 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 Carded Stock # 88804 88805 88806 88807 88808 88809 88810 88811 88812 Dia. (in) 13/16 7/8 15/16 1 1-1/8 1-1/4 1-3/8 1-1/2 88813 88814 88815 88816 88818 88820 88822 88824 Dia. (in) 3/4 7/8 1 Carded Stock # 88712 88714 88716 Speedbor® Wood bit Extensions • Adds extra reach to wood boring bit • Extension head will follow 5/8" and larger bits through hole • Two set screws secure bit into extension • 1/8" hex key included with extension Overall Lgth (in) 6 12 Carded Stock # 88702 88601 Irwin® Power Drill Auger bits I-100 Auger bits 7-1/2" OAL* 4-1/2" Twist Dia. (in) 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 Hex Shank Size (in) 7/32 7/32 7/32 7/32 7/32 5/16 5/16 5/16 5/16 Pouched Stock # 49904 49905 49906 49907 49908 49909 49910 49911 49912 22 Tubed Stock # 42416 42418 42420 Hex Shank Size (in) 5/16 5/16 5/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 Tubed Stock # 47406 47407 47408 47409 47410 47411 47412 47413 47414 47415 47416 Dia. Hex Shank Size (in) (in) 1-1/16 7/16 7/16 1-1/8 1-3/16 7/16 7/16 1-1/4 1-5/16 7/16 1-3/8 7/16 1-1/2 7/16 1-5/8 7/16 7/16 1-3/4 2 7/16 *OAL = Overall Length Tubed Stock # 47417 47418 – 47420 – 47422 47424 – – – • Hollow center twist design for fast, continuous flow of chips • Single-spur design bores smooth, clean holes for installing bolts and pins • For boring creosoted poles and construction timbers and multiple timber applications • 5" shank has 1-3/4" of 1/2" round and 1-3/4" of 7/16" hex - cut off hex section and use 1/2" round shank if job requires • Full length heat treatment strengthens twist where greatest strain occurs • Medium-fast screw pitch • Extra length provides added reach Carded Stock # 88706 88708 88710 Dia. Hex Shank Size (in) (in) 5/16 1 1-1/8 7/16 1-1/4 7/16 *OAL = Overall Length • Sizes 3/8" to 1/2" have 5" shanks with 1-3/4" of 23/64" round and 1-3/4" of 5/16" hex • Sizes 9/16" to 2" have 5" shanks with 1-3/4" of 7/16" hex - cut off hex shank if your job requires a round shank Power Pole Auger bits 16" Speedbor2000® xL bits Dia. (in) 3/8 1/2 5/8 Tubed Stock # 42410 42411 42412 42413 42414 Long Ship Auger bits - 520H Series 17" OAL* 12" Twist Dia. (in) 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 Carded Stock # Hex Shank Size (in) 5/16 5/16 5/16 5/16 5/16 Cutting Tools 4-3/4" Speedbor2000® SL bits Dia. (in) 5/8 11/16 3/4 13/16 7/8 Dia. Hex Shank Pouched (in) Size (in) Stock # 13/16 5/16 49913 7/8 5/16 49914 15/16 5/16 49915 1 5/16 49916 1-1/8 7/16 49918 1-1/4 7/16 49920 1-3/8 7/16 49922 1-1/2 7/16 49924 *OAL = Overall Length 412H Hex 17" OAL* Dia. Shank 12" Twist (in) Size (in) Bulk Stock # 9/16 7/16 46809 5/8 7/16 46810 11/16 7/16 46811 3/4 7/16 46812 13/16 7/16 46813 7/8 7/16 – 15/16 7/16 – 1 7/16 – 1-1/16 7/16 – *OAL = Overall Length 418H 23" OAL* 18" Twist Bulk Stock # 46909 46910 46911 46912 46913 46914 46915 – – 424H 29" OAL* 24" Twist Bulk Stock # 47009 47010 47011 47012 47013 47014 47015 47016 47017 18" Auger bit Extensions • Hex key included • Six flats on shank • Heavy-duty double set screw type Compatible Min. Hole Dia. Ext. Auger Shanks Will Follow Through (in) 5/16" Hex or (23/64" round) 11/16 7/16" Hex or (1/2" round) 1-1/16 WWW.HANESSUPPLY.COM Bulk Stock # 43805 43907 22 - 1 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Irwin® Hand brace Auger bits American Tool® Utility Pole Auger bits • Single-twist type with single-spur, cutter side lip • Specially designed to bore through creosoted poles without clogging, binding or stopping to clear chips • Equally efficient for boring large timbers used in heavy construction • Medium-fast screw pitch • Hollow center twist design for fast, continuous flow of chips • Heat-treated full length for extra strength • Adapter Shank Sizes (11/16" to 1-1/16") 5/16" Hex Shank Long Solid Center Wood Auger Bits - 65T Series 18" OAL* 12" Twist (continued) Bulk Stock # 47704 47705 47706 47707 47708 47709 47710 47711 47712 Dia. (in) 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 Dia. (in) 13/16 7/8 15/16 1 1-1/16 1-1/8 1-1/4 1-3/8 1-1/2 Electrician’s Auger bits 413T 12" OAL* Dia. 8" Twist Bulk Stock # (in) 3/8 – 7/16 – 1/2 – 46509 9/16 5/8 – 11/16 46511 3/4 – 13/16 46513 7/8 – 15/16 – 1 – 1-1/16 – *OAL = Overall Length 415T 18" OAL* 12" Twist Bulk Stock # 46606 46607 46608 46609 46610 46611 46612 46613 46614 46615 46616 46617 416T 24" OAL* 18" Twist Bulk Stock # – – – – – 46711 – 46713 – – 46716 – • For use in drilling applications where small nails and other foreign materials may be encountered • For deep boring work in large timbers, telephone and power poles, on docks and bridges, in mining and heavy construction • Single-twist type with single cutter and side lip • Heat-treated for extra strength • Medium-fast screw pitch • Adapter Shank Sizes (1/4" to 5/8") Hex Not Available (11/16" to 1-1/16") 5/16" Hex Shank (1-1/8" to 1-1/2") 7/16" Hex Shank Bulk Stock # 47104 47105 47106 47107 47108 47109 47110 47111 47112 Dia. Bulk (in) Stock # 13/16 47113 7/8 47114 15/16 47115 1 47116 1-1/16 47117 1-1/8 47118 1-1/4 47120 1-1/2 47124 *OAL = Overall Length Long Solid Center Wood Auger bits - 65T Series 18" OAL* 12" Twist • Balanced cutting head with medium-fast screw pitch bores cleaner and faster • Heat-treated and tempered full length for extra strength • Double-spur, double-cutter • Adapter Shank Sizes (1/4" to 5/8") Hex Not Available (11/16" to 1-1/16") 5/16" Hex Shank (1-1/8" to 1-1/2") 7/16" Hex Shank – continues – 22 - 2 47713 47714 47715 47716 47717 47718 47720 47722 47724 • Solid-center type with medium-screw pitch • Single spur and cutter for fast boring • For use by linemen, electricians, and plumbers…wherever fast boring is required • Heat-treated full length for extra strength • Adapter Shank Sizes (1/4" to 5/8") Hex Not Available (11/16" to 1") 5/16" Hex Shank Long Ship Auger bits - 515T Series 18" OAL* 12" Twist Dia. (in) 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 Bulk Stock # 3E 10" OAL* Dia. 6" Twist (in) Bulk Stock # 1/4 – – 3/8 1/2 – 5/8 – 11/16 45811 3/4 – 13/16 – 7/8 – 15/16 – 1 – *OAL = Overall Length 35T 18" OAL* 12" Twist Bulk Stock # 46204 46206 46208 46210 46211 46212 46213 46214 46215 46216 Irwin® Impact Wrench Auger bits I-100 Impact Wrench Auger bits TM Quick Change 12" OAL* Dia. Hex Size 9" Twist (in) (in) Bulk Stock # 9/16 7/16 41209 11/16 7/16 41211 13/16 7/16 41213 15/16 7/16 – 1-1/16 7/16 – *OAL = Overall Length 18" OAL* 14" Twist Bulk Stock # 41809 41811 41813 41815 41817 41H18 Quick Change 18" OAL* Hex Size 15" Twist (in) Bulk Stock # 7/16 47909 7/16 47911 7/16 47913 7/16 47915 7/16 47917 5/8 48109 5/8 48111 5/8 48113 5/8 – 5/8 – 41H24 24" OAL* 21" Twist Bulk Stock # – 48211 48213 48215 – – 48311 48313 48315 48317 Utility Pole Impact Wrench Auger bits - 41H Series Dia. (in) 9/16 11/16 13/16 15/16 1-1/16 9/16 11/16 13/16 15/16 1-1/16 WWW.HANESSUPPLY.COM Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools American Tool ® Long Ship Impact Wrench Auger bits - 51H Series 51H18 24" OAL* 15" Twist Bulk Stock # – 48709 48711 48713 48715 48717 – IrWIN® Impact Wrench Auger bits Electrician’s Impact Wrench Auger bits 3H12 Quick Change 12" OAL* Dia. Hex Size 9" Twist (in) Bulk Stock # (in) 9/16 7/16 48809 11/16 7/16 13/16 7/16 48813 *OAL = Overall Length • Precision-ground for use in furniture making, doweling, cabinetry and other woodworking applications where an exact hole size is required • The spurred cutting head is designed to reduce splintering and ensure a smooth, clean hole • Wide flutes provide a fast, continuous flow of chips • Each bit is made from Chrome-Vanadium Steel, heat treated at full length for extra sharpness and long life Dia. Carded (in) Stock # 1/8 49612 49613 3/16 1/4 49614 5/16 49615 3/8 49616 7/16 49617* 49618* 1/2 *7/16" and 1/2" have 3/8" reduced shanks rOUTEr bITS 3H18 18" OAL* 15" Twist Bulk Stock # 48911 48913 IrWIN® router bits Shank Diameter Overall Length Irwin® Wood boring bits Self-Feed Wood bits • Drill large diameter holes in wood for pipe, conduit and other applications • Effortless cutting, even in gummy wood • Each bit is packaged with one hex key and two feed screws Dia. (in) 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2 Hex Size (in) 7/16 7/16 7/16 7/16 7/16 7/16 7/16 Boxed Stock # 43016 43018 43020 43022 43024 43028 43032 Dia. (in) 2-1/8 2-1/4 2-9/16 3 3-5/8 4-5/8 Hex Size (in) 7/16 7/16 7/16 7/16 7/16 7/16 Forstner bits - 3-1/2" OAL* Dia. Round Shank Clamshell (in) Dia. (in) Stock # 1/4 .250 42904 3/8 .250 42906 1/2 .315 42908 5/8 .315 42910 3/4 .375 42912 7/8 .375 42914 1 .375 42916 1-1/8 .375 42918 1-1/4 .375 42920 Boxed Stock # 43034 43036 43041 43047 43058 43074 Dia. Round Shank Clamshell (in) Dia. (in) Stock # 1-3/8 .375 42922 1-1/2 .375 42924 1-5/8 .375 42926 1-3/4 .375 42928 1-7/8 .375 42930 2 .375 42932 2-1/8 .375 42934 *OAL = Overall Length Cutting Length radius Types of router bits rounding Over • For smooth uniform rounded edges beading • For decorative edges and period furniture Cove • For decorative edges and drop leaf table joints Dovetail • Used for dovetailing joints and drawer fronts Cutting Dia. Chamfer • For decorative edging and 45° concealed mitered panel joints Panel Pilot • Point drills through for self starting blind hole routing rabbeting • For step cutting of edges, lap joints and cabinet door cuts Laminate Trimming • For fast, smooth trimming of laminate material 4" Forstner bit Extension • Includes hex key Three Flatted Description Shank Diameter (in) For use with .375" Shank Bits .375 Carded Stock # 42936 WWW.HANESSUPPLY.COM 22 - 3 22 Cutting Tools 51H12 Quick Change 18" OAL* Hex Size 9" Twist Dia. (in) (in) Bulk Stock # 1/2 7/16 48508 9/16 7/16 48509 11/16 7/16 48511 7/16 48513 13/16 15/16 7/16 – 7/16 – 1-1/16 5/8 48609 9/16 *OAL = Overall Length brad Point Drill bits Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools American Tool® / Diamond Cutting Tools 22 Diamond Carbide Tipped - 1/4" Diameter Shank Description Beading Beading Beading Beading Beading Beading Beading Bevel Trimming Chamfer Classic Pattern Classic Pattern Classic Pattern Classic Pattern Classic Pattern Comb. Panel Comb. Panel Comb. Panel Core Box Core Box Core Box Core Box Core Box Cove Cove and Bead Cove Cove Dovetail Dovetail Dovetail Dovetail Hinge Mortising Hinge Mortising Hinge Mortising Key Hole Laminate Trim Laminate Trim Laminate Trim Laminate Trim Laminate Trim Laminate Trim Laminate Trim Laminate Trim Laminate Trim Laminate Trim Ogee Ogee Ogee Pattern Cutting Pattern Cutting Pattern Cutting Rabbeting Roman Ogee Roman Ogee Roman Ogee Round Over Round Over Round Over Round Over Round Over Round Over Round Over Round Over Round Over Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight V-Groove V-Groove V-Groove 22 - 4 Radius/ Cutting Cutting Cutting Degree Depth Dia. Length (in) (in) (in) (in) 1/8 – – – 1/8 Plunge – – – – 1/4 – – – 1/4 Edge – – – – 3/8 – – – 3/8 Edge – – – – 1/2 – – – 25 – – – 45 – – – Plunge 3/16 – – – Plunge 5/16 – – – Plunge 1/2 – – – – – 1-1/4 1/2 – – 1-1/2 5/8 – – 1/4 – 1 Flute – – 3/8 – 2 Flutes – – 3/8 – – – 1/4 – – – 3/8 – – – 1/2 – – – 5/8 – – – 3/4 – 1/4 – – – 1/4 – – – 3/8 – – – 1/2 – – – 9 – 3/8 – 14 – 1/2 – 14 – 17/32 – 7 – 3/4 – – – 1/2 – – – 5/8 – – – 3/4 – – – 3/8 – Flush – – 1/4 5/8 Flush – – 3/8 5/8 Flush – – 3/8 1 Flush – – 1/2 5/8 Flush – – 1/2 1 Flush – – 1/2 1-1/4 Flush (3 flutes)– – 1/2 5/8 Flush (3 flutes)– – 1/2 1 22 – 3/8 – 22 – 5/8 – 1/8 – – – 3/16 – – – 1-3/8 – – – – – 1/2 1 – – 5/8 3/4 – – 3/4 3/4 – 3/8 – – 5/32 – – – 1/4 – – – 1-1/4 – – – 1/16 – – – 1/8 – – – 3/16 – – – 1/4 – – – 5/16 – – – 3/8 – – – 1/2 – – – Plunge 1/4 – – – Plunge 1/2 – – – 2 Flutes – – 1/4 1/2 2 Flutes – – 1/4 5/8 2 Flutes – – 1/4 7/8 2 Flutes – – 1/4 1 2 Flutes – – 1/4 1 2 Flutes – – 9/32 1 2 Flutes – – 5/16 7/8 2 Flutes – – 3/8 1 2 Flutes – – 7/16 1 2 Flutes – – 1/2 3/4 2 Flutes – – 1/2 1 2 Flutes – – 9/16 3/4 2 Flutes – – 5/8 7/8 2 Flutes – – 3/4 3/4 – – 3/16 5/8 – – 1/4 3/4 – – 1/4 7/8 – – 1/4 1 – – 5/16 1 – – 3/8 1 – – 1/2 7/8 Panel Raising 25 – – – 90 – 3/8 – 90 – 1/2 – Flush Trim – – 5/8 1 Stock No. 31183 31157 31139 31185 31187 31137 31142 31154 31121 31210 31211 31260 31262 31263 31130 31131 31190 31132 31133 31134 31135 31136 31122 31215 31123 31124 31146 31129 31147 31149 31126 31127 31125 31119 31151 31158 31152 31153 31150 31159 31175 31174 31166 31165 31143 31144 31189 31196 31197 31198 31117 31167 31163 31220 31182 31160 31161 31168 31162 31169 31170 31155 31156 31108 31100 31102 31109 31171 31176 31103 31172 31177 31178 31173 31179 31106 31107 31111 31116 31112 31120 31113 31114 31115 31141 31118 31181 31192 DIAMOND bLADES Cured Concrete Wet blades 31154 31137 31122 31132 Our Quality-Engineered Wet Blades Deliver Maximum Performance Premium black (P) .250 Diamond Depth • A high quality blade that delivers long lasting, fast cutting performance. • Designed for contractors who demand maximum efficiency and value. Heavy Duty Orange (H) .236" Diamond Depth • Fast cutting blade that works well with a wide variety of high or low HP saws. • Combines long life performance while maximizing your blade dollars. Standard Gold (S) .187" Diamond Depth • Economical blades that work well for contractors who don’t have a heavy volume of cutting to be done. • Delivers the speed and convenience of a diamond blade compared with conventional abrasive blades that require frequent blade changes. 31215 31146 31125 10" x .110 10" x .125 12" x .110 12" x .125 12" x .140 12" x .155 12" x .187 12" x .250 12" x .375 14" x .110 14" x .125 14" x .140 14" x .155 14" x .175 14" x .187 14" x .250 14" x .375 16" x .125 16" x .140 16" x .155 16" x .187 16" x .250 18" x .125 18" x .140 Available Sizes* 18" x .155 18" x .165 18" x .175 18" x .187 18" x .210 18" x .250 20" x .125 20" x .140 20" x .155 20" x .187 20" x .250 24" x .140 24" x .155 24" x .165 24" x .175 24" x .187 24" x .210 24" x .250 25" x .155 26" x .155 26" x .165 26" x .175 26" x .187 26" x .210 26" x .250 28" x .187 30" x .175 30" x .187 30" x .210 30" x .250 32" x .175 32" x .187 32" x .210 32" x .250 36" x .175 36" x .187 * 1" arbor with drive pinhole standard. Custom arbor sizes are available. When ordering, please specify arbor size if different from 1". 31143 31150 31117 31198 31156 31170 Cured Concrete Specs (Application Code C) Aggregate Spec Aggregate Type Spec. (Heavy Reinforcement) Type No.* No.* Hard 51W Hard 51W Med. Hard 52 Med. Hard 52 Medium 56 Medium 52 Med. Soft 60 Med. Soft 56 Soft 62 Soft 56 Select Grade: S Standard (Gold) H Heavy Duty (Orange) P Premium (Black) Most concrete blades are laser welded. Any concrete blade can be laser welded or silver brazed upon request. * These are recommendations for starting specifications. High Performance Cured Concrete Wet blades The very highest quality diamond blades in the industry, delivering lowest cost-per-foot performance on the toughest applications and hardest aggregates. Mega Premium Green (MP) 31100 .437 Diamond Depth • Extremely long life blade especially good for hard aggregates. • Made with our highest standard diamond concentration. • Delivers the lowest diamond tool cost per foot in the industry. – continues – WWW.HANESSUPPLY.COM 36" x .210 36" x .250 42" x .187 42" x .210 42" x .220 48" x .210 48" x .250 54" x .220 60" x .220 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Diamond High Performance Cured Concrete Wet Blades (continued) Asphalt, Asphalt Over Concrete and Green Concrete Wet Blades (continued) Super Premium Silver (SP) .375 Diamond Depth • A high quality long life blade. • Made with a high diamond concentration. • Especially well suited for sawing in tough applications. .320 Diamond Depth • Same high quality as our Premium Black blade with a taller segment to lower your cutting cost. 10" x .110 10" x .125 12" x .110 12" x .125 12" x .140 12" x .155 12" x .187 12" x .250 12" x .375 14" x .110 14" x .125 14" x.140 14" x .155 14" x .187 14" x .250 14" x .375 16" x .125 16" x .140 16" x .155 16" x .187 16" x .250 18" x .125 18" x .140 18" x .155 Available Sizes* 18" x .165 18" x .175 18" x .187 18" x .210 18" x .250 20" x .125 20" x .140 20" x .155 20" x .187 20" x .250 24" x .140 24" x .155 24" x .165 24" x .175 24" x .187 24" x .210 24" x .250 25" x .155 26" x .155 26" x .165 26" x .175 26" x .187 26" x .250 28" x .187 30" x .175 30" x .187 30" x .210 30" x .250 32" x .175 32" x .187 32" x .210 32" x .250 36" x .175 36" x .187 36" x .210 36" x .250 42" x .187 42" x .210 42" x .220 48" x .210 48" x .250 54" x .220 60" x .220 * 1" arbor with drive pinhole standard. Custom arbor sizes are available. When ordering, please specify arbor size if different from 1". High Performance Cured Concrete Specs (Application Code C) Aggregate Spec. Aggregate Type Spec. Type No.* (Heavy Reinforcement) No.* Hard-Fast Cutting 50W Hard 50W 50W/51W Hard 50W/51W Hard Med. Hard 51W Med. Hard 51W Medium 52W Medium 52W Med. Soft 56W Med. Soft 56W Soft 62DW Soft 56W Select Grade: T Professional (Blue) SP Super Premium (Silver) MP Mega Premium (Green) Most concrete blades are laser welded. Any concrete blade can be laser welded or silver brazed upon request. * These are recommendations for starting specifications. Asphalt, Asphalt Over Concrete and Green Concrete Wet blades Advanced Asphalt, Asphalt Over Concrete and Green Concrete Wet Blades are designed with special hardened steel cores for added blade life with minimal undercutting. Professional blue (T) .320 Diamond Depth • Same high quality as our Premium Black blade with a taller segment to lower your cutting cost. • A high quality blade that delivers long lasting, fast cutting performance. • Designed for contractors who demand maximum efficiency and value. Heavy Duty Orange (H) .236 Diamond Depth • Fast cutting blade that works well with a wide variety of high or low HP saws. • Combines long life performance while maximizing your blade dollars. • Economical blades that work well for contractors who don't have a heavy volume of cutting to be done. • Delivers the speed and convenience of a diamond blade compared with abrasive blades that require frequent blade changes. – continues – Available Sizes* 18" x .125 18" x .140 18" x .155 18" x .187 18" x .250 20" x .125 20" x .140 24" x .155 24" x .187 26" x .155 26" x .187 30" x .175 30" x .187 32" x .187 36" x .187 * 1" arbor with drive pinhole standard. Custom arbor sizes are available. When ordering, please specify arbor size if different from 1". Asphalt, Green Concrete and Asphalt Over Concrete Blade Specifications Green Asphalt Over Asphalt Over Green Asphalt Asphalt Concrete Concrete Concrete Concrete Low HP High HP Low HP High HP Low HP High HP Aggregate Type Spec. No* Spec. #* Spec. #* Spec. #* Spec. #* Spec. #* Hard A350 A605 G605 G605 AC62DW AC62DW Med. Hard A605 A606 G606 G606 AC62DW AC62DW Medium A606 A630 G606 G606 AC64DW AC64DW A615 A635 G660 G660 AC64DW AC64DW Med. Soft Soft A635 A665 G670 G670 AC64DW AC66DW Select Grade: S Standard (Gold) H Heavy Duty (Orange) P Premium (Black) T Professional (Blue) Most asphalt, green concrete and asphalt over concrete blades are laser welded. Any of these blades can be laser welded or silver brazed upon request. *These are recommendations for starting specifications. Low horsepower (HP) = 18 HP or lower. High horsepower (HP) = 20 HP or higher. Wall Saw and Hand Saw blades Three Wall Saw Blade Innovations to Save You Money Our Original Split Segment Design, Ultimate Split Seg and Sandwich Bonds deliver maximum wall and hand sawing results Available Grades Super Premium (SP) Professional (T) Premium (P) Heavy Duty (H) 12" x .110 12" x .125 14" x .110 14" x .125 14" x .140 16" x .125 18" x .125 18" x .187 18" x .210 Diamond Depths Sandwich. -20 & Ult. .375 .437 .320 .375 .250 .320 .236 .250 18" x .220 18" x .250 20" x .125 20" x .140 20" x .187 20" x .210 24" x .140 24" x .187 24" x .210 Available Sizes* 24" x .220 24" x .250 26" x .187 26" x .210 30" x .175 30" x .187 30" x .210 30" x .220 30" x .250 32" x .175 32" x .187 32" x .210 36" x .175 36" x .187 36" x .210 36" x .220 36" x .250 42" x .187 42" x .210 42" x .250 48" x .210 48" x .250 54" x .210 54" x .250 60" x .220 70" x .220 *All Wall Saw/Hand Saw blades come with 1" arbor standard. Custom arbor sizes are available. When ordering, please specify arbor size if different from 1". Premium black (P) .250 Diamond Depth Standard Gold (S) .187 Diamond Depth 14" x .140 14" x .187 14" x .250 14" x .375 16" x.125 16" x .140 Sandwich Seg Wall Saw blades Offer… • Faster cutting - blades maintain better clearance for their full life and better tracking in cut. • Longer Life - blades can be worn out completely. Sandwich segs helps keep blades that are 75% worn in use by preventing breakdown due to binding and lack of side clearance. Split Segment Design • Split segments give less resistance for faster and more economical cutting. • This design keeps segments cooler in higher steel applications. To order, add a (-20) to the end of your specifications. New -20 Split Seg Design – New ULTIMATE Wall Saw blade • -20 Split Sandwich Seg Designed with New “U” Gullet Design Core • Cuts faster, removes slurry more efficiently • Holds side clearances better (Just order your normal -20 blades and add “U” to the end of the specifications) – continues – WWW.HANESSUPPLY.COM 22 Cutting Tools Professional blue (T) 12" x .125 12" x .140 12" x .187 12" x .250 12" x .375 14" x .125 22 - 5 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Diamond Wall Saw and Hand Saw Blades (continues) Wall Saw/Hand Saw blade Specifications Ultimate Sandwich Regular Sandwich Type of Sawing Split Segment Split Seg Only Non Sandwich Fast cutting hard aggregate air saws W212-20 W212-20U W212 W20 W323-20 W323-20U W323 W2033 General purpose air saws Fast cutting hydraulic saws W3A3-20 W3A3-20U W3A3 W33 and long life air saws W434-20 W434-20U W434 W3342 Fast cutting general purpose hydraulic saws W9A9-20 W9A9-20U W9A9 W49 General purpose hydraulic sawing Long life general purpose blade W545-20 W545-20U W545 W42 for hydraulic saws W5A5-20 W5A5-20U W545 W50 Long life soft aggregate brick and block hydraulic saws Long life brick & block hydraulic saws – – W52 Select Grade: SP Super Premium T Professional P Premium H Heavy Duty Most walls saw and hand blades are lasers welded. Any wall saw or hand saw blade can be laser welded or silver brazed upon request. *These are recommendations for starting specifications. Diamond Wire and beads For use on CORE CUT WS25 and WS50 Diamond Wire Saws to cut reinforced concrete, masonry and stone. Need an outstanding performer for cutting fire brick? Check out our long lasting, fast cutting Refractory Blades Available in: Heavy Duty Orange, Premium Black, Supreme Silver Refractory Blade Specifications Material/Abrasive Level High Alumina, Hard Materials Fast Cutting Medium Duty Fire Brick, Fast Cutting General Purpose, Insulating Brick, Ladle Brick Long Life, for Silicon Carbide & other abrasive materials *1" arbor with drive pinhole standard. Custom arbor sizes are available. When ordering, please specify arbor size if different from 1". Available Sizes: 12", 14", 16", 18" and 20" Spec. No.* R-92 R-95 R-98 R-99 Grinding and Grooving Wet blades We manufacture high quality, long lasting CORE CUT Grinding and Grooving Blades in all arbors for all types of machines. Please call for blade specifications for your machine! We re-string spring & crimp diamond wire! Diamond Wire and beads Specifications Diamond Available Description Concrete Concentration Bonds 11x6 Heavy Duty Bead Only Medium High W36, W711, W50 11x6 Premium Bead Only High High W36, W711, W50 11x6 Supreme Bead Only High Ultra High W36, W711, W50 11x6 Heavy Duty Spring Medium High W36, W711, W50 & Crimp Wire 11x6 Premium Spring Medium High W36, W711, W50 & Crimp Wire 11x6 Supreme Spring High Ultra High W36, W711, W50 & Crimp Wire 11x6 Premium Rubber Very High Medium BS-421 (Tyrolit) Wire 11x6 Supreme Rubber High Ultra High BS-30, BS-40 (Tyrolit) Wire Floor Grinding Heads • Large 10 & 12 inch grinding heads that take the rough spots out of concrete surfaces in a hurry • Effective on floors, streets, highways, sidewalks and more. • Cleans, levels and smooths bumps and uneven areas • Removes rain spots and epoxies • For use on our CBCG Floor Grinder and other similar machines Part No. WBH1160N WBP1160N WBU1160N WR1160HS WR1160PS WR1160US WR1160PR WR1160UR 20 Seg 10 Seg Part Numbers & Specifications - Heavy Duty Orange Grinding Heads Material/ Part 10"-10 Part 10"-20 Part 12"-12 Abrasive Level No. Seg No. Seg No. Seg Hard/nonGHH1010 GSH10 GHH1020 GSH20 GHH1212 GSH12 abrasive material Soft, abrasive GHH1010 GHH10 GHH1020 GHH20 GHH1212 GHH12 material Part Numbers & Specifications - Premium Black Grinding Heads Material/ Part 10"-10 Part 10"-20 Part 12"-12 Abrasive Level No. Seg No. Seg No. Seg Hard/nonGHP1010 GSP10 GHP1020 GHP20 GHP1212 GSP12 abrasive material Soft abrasive GHP1010 GHP10 GHP1020 GHP20 GHP1212 GHP12 material 22 - 6 refractory Wet blades Part 12"-24 No. Seg GSH1224 GSH24 GHH1224 GHH24 Part 12"-24 No. Seg GHP1224 GSP24 GHP1224 GHP24 Diamond Products helps maximize the life of its grinding & grooving blades by matching the correct diamond concentration with machine horsepower. Segmented Dry High Speed blades 10" through 20" Diameter • The most competitively-priced on the market • Designed for fast, smooth cutting in many materials • More constant depth of cut and far fewer blade changes compared to abrasive blades • Great for cutting concrete, concrete curbing, brick or block walls, expansion joints, precast and prestressed materials and much more • May be used wet or dry • Designed for use on high-speed gasoline and electric hand held saws. May also be used on masonry and low horsepower (>20HP) concrete floor saws • Blades come standard with 1" arbor with drive pinhole or 20mm arbor Economy Green Dry High Speed Blades Size H4000 Cat. No. 12" x .110 26137 14" x .110 26420 Value Blue Dry High Speed Blades Size V4000 Cat. No. 12" x .110 26903 12" x .110 x 20mm 26904 14" x .125 26905 14" x .125 x 20mm 26906 18" x .125 27401 20" x .140 27407 – continues – WWW.HANESSUPPLY.COM Standard Gold Dry High Speed Blades H7S H8S H10S Cat. No. Cat. No. Cat. No. 10" x .110 11719 11720 11717 12" x .110 11724 11725 11723 12" x .110 x 20mm 11732 11733 11730 12" x .125 11736 11737 11735 12" x .125 x 20mm 11739 11741 11738 12" x .235* – – – 14" x .110 11744 11745 11743 14" x .110 x 20mm 11749 11750 11748 14" x .125 11752 11753 11751 14" x .125 x 20mm 11755 11756 11754 14" x .235* ------16" x .125 11757 11758 26527 18" x .125 28303 --14395 20" x .140 28270 28271 13846 * Blades designed for precutting in diamond chain applications where overcuts are not allowed. Size Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Diamond Segmented Dry High Speed Blades (continued) Specifications Application Value Blue H4000 V4000 – – – – Standard X-tra Plus Heavy Duty Gold Red Orange H7S H7X H7H H10S H10X H10H H8S H8X H8H Premium Super Black HD Silver H7P H7SH H10P H10SH H8P H8SH Segmented Dry High Speed blades Premium Black Dry High Speed Blades H8P H10P H7P Size Cat. No. Cat. No. Cat. No. 10" x .110 11566 11567 11564 12" x .110 11573 11574 11570 12" x .110 x 20mm 11579 11580 11576 11586 11587 11584 12" x .125 12" x .125 x 20mm 11590 11591 11589 11593 28284 28285 12" x .235* 14" x .110 11596 11597 11594 14" x .110 x 20mm 11600 11601 11598 14" x .125 11606 11608 11603 14" x .125 x 20mm 11614 11618 11611 11626 11627 23437 14" x .235* 16" x .125 11629 11630 11628 18" x .125 11663 11634 11631 20" x .140 11635 16713 15557 *Blades designed for precutting in diamond chain applications where overcuts are not allowed. 10" through 20" Diameter X-tra Plus Red Dry High Speed Blades* H7X H8X H10X Cat. No. Cat. No. Cat. No. 10" x .110 11762 11763 11761 12" x .110 11766 11767 11765 12" x .110 x 20mm 11769 11770 11768 12" x .125 11772 11773 11771 11775 16387 12" x .125 x 20mm 11774 – – – 12" x .235* 14" x .110 11779 11781 11778 14" x .110 x 20mm 11784 11785 11783 14" x .125 11789 11790 11787 14" x .125 x 20mm 11793 11794 11792 – – – 14" x .235* 16" x .125 18040 11797 26916 18" x .125 15713 11799 11798 20" x .140 11802 15137 11801 *Blades designed for precutting in diamond chain applications where overcuts are not allowed. Size Specifications Application Heavy Duty Orange Dry High Speed Blades Size H7H H8H H10H Cat. No. Cat. No. Cat. No. 10" x .110 11421 11422 11418 12" x .110 11440 11441 11436 12" x .110 x 20mm 11454 11455 11451 12" x .125 11475 11478 11472 12" x .125 x 20mm 11484 11485 11482 12" x .235* 28279 23249 28282 14" x .110 11496 11497 11492 14" x .110 x 20mm 11505 11506 11502 14" x .125 11515 11518 11508 14" x .125 x 20mm 11528 11529 11525 14" x .235* 11546 11547 28280 16" x .125 11550 11551 11549 18" x .125 11555 11556 14231 20" x .140 11560 11561 11558 *Blades designed for precutting in diamond chain applications where overcuts are not allowed. Specifications Application General Purpose Reinf. Concrete General Purpose Long Life Abrasive Materials Long Life Economy Green Value Blue H4000 V4000 – – – – H8S H10S Economy Green General Purpose –– Reinf. Concrete General Purpose H4000 Long Life Abrasive Materials –– Long Life Value Blue Std. X-tra Plus Heavy Duty Premium Super HD Silver Gold Red Orange Black .375 diamond depth V4000 H8S –– –– Dry Turbo blades H7S H10S H7X H8X H10X H7H H8H H10H H7P H8P H10P H7SH H8SH H10SH • Designed for use on right-angle Standard X-tra Plus Heavy Duty Premium Super HD Gold Red Orange Black Silver H7S 10" through 20" Diameter • The most competitively-priced on the market • Designed for fast, smooth cutting in many materials • More constant depth of cut and for fewer blade changes compared to abrasive blades • Great for cutting concrete, concrete curbing, brick or block walls, expansion joints, precast and prestressed materials and much more • May be used wet or dry • Now available in Super Heavy Duty Silver with extra tall diamond depth of .375 H7X H8X H10X H7H H8H H10H H7P H8P H10P H7SH H8SH H10SH grinders, high speed, portable electric, masonry and tile saws. • Advanced, high-density metal bond technology and high diamond concentration • Long life and smooth cutting in the widest range of materials • Patented slotted core makes this the coolest running dry blade on the market • Provides an audible warning if the blades mounted incorrectly to protect it from damage and destruction (Available on 12" & 14" Std. Gold and 7" - 14" Heavy Duty Orange only) Economy Green Turbo Blades* Size T4000 Cat. No. 4" x .080 23755 4-1/2" x .080 23988 7" x .095 23757 12" x .125 23759 14" x .125 23761 Value Blue Dry Turbo Blades Size V4000 Cat. No. 4" x .095 27412 4-1/2" x .095 27414 5" x .095 27416 6" x .095 27418 7" x .095 27420 8" x .095 27424 9" x .095 27426 10" x .118 27428 12" x .125 27430 12" x .125 x 20mm 27431 14" x .125 27433 14" x .125 x 20mm 27434 WWW.HANESSUPPLY.COM Standard Gold Dry Turbo Blades Size T7S Cat. No. 4" x .080 12480 4-1/2" x .080 12483 5" x .080 12486 6" x .080 12487 7" x .095 12489 8" x .095 12493 9" x .095 12494 10" x .110 12495 12" x .125 12498 12" x .125 x 20mm 12500 14" x .125 12501 14" x .125 x 20mm 12502 20" x .140 15584 Specifications Application General Purpose Smooth Cutting Long Life Heavy Duty Orange Dry Turbo Blades Size T7H Cat. No. 4" x .080 12281 4-1/2" x .080 12286 5" x .080 12290 6" x .080 12292 7" x .095 12298 8" x .095 12309 9" x .095 12312 10" x .110 12315 12" x .125 12319 12" x .125 x 20mm 12327 14" x .125 12331 14" x .125 x 20mm 12334 20" x .140 12338 Economy Value Standard Heavy Duty Green Blue Gold Orange T4000 T4000 T7S T7H 22 - 7 22 Cutting Tools General Purpose Reinf. Concrete General Purpose Long Life Abrasive Materials Long Life Economy Green Segmented Dry High Speed blades Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Dry High Performance Turbo blades Diamond High Performance Dry Turbo blades • Faster cutting, lower cost version of our original outstanding turbo blade • Designed for use on right-angle grinders, high speed, portable, electric, masonry and tile saws • The fast cut from its freestanding turbo segments and high diamond concentration • Smooth cutting from our advanced, highdensity metal bond technology and our unique segment design • Cuts brick, block, concrete pavers, concrete, marble and stone • Especially well suited for cutting harder materials such as concrete pavers, fire brick, marble, granite and other natural stone. Standard Gold HP Dry Turbo Blades Size HPT7S Cat. No. 4" x .080 11703 4-1/2" x .080 11704 5" x .080 28247 19906 6" x .080 7" x .095 11705 11707 8" x .095 9" x .095 22322 10" x .110 11708 12" x .125 11709 12" x .125 x 20mm 11711 11712 14" x .125 14" x .125 x 20mm 11713 20" x .140 11715 Specifications Application General Purpose Smooth Cutting Long Life Heavy Duty Orange HP Dry Turbo Blades Size HPT7H Cat. No. 4" x .080 11637 4-1/2" x .080 11639 5" x .080 11641 11642 6" x .080 7" x .095 11643 11645 8" x .095 9" x .095 11646 10" x .110 11648 12" x .125 11654 12" x .125 x 20mm 11660 11666 14" x .125 14" x .125 x 20mm 11669 20" x .140 11678 Standard Gold HPT7S DM86S DM87S Cat. No. Cat. No. 11949 11950 11955 11956 11964 11965 11974 20122 11978 11979 Premium Black Masonry Blades Size DM80P DM85P Cat. No. Cat. No. 10" x .110 11904 11905 12" x .110 11908 11909 14" x .110 11917 11920 18" x .125 18611 11935 20" x .125 11940 11942 DM86P DM87P Cat. No. Cat. No. 11906 11907 11910 11911 11921 11922 11936 11937 11943 11944 Heavy Duty Orange Masonry Blades Size DM80H DM85H DM86H DM87H Cat. No. Cat. No. Cat. No. Cat. No. 10" x .110 11817 11819 11820 11821 12" x .110 11825 11827 11828 11829 14" x .110 11847 11850 11853 11855 18" x .125 11879 11881 11883 11884 20" x .125 11893 11895 11897 11898 – continues – 22 - 8 Std. Gold HD Orange Prem. Black DM80S DM80H DM80P DM85S DM85H DM85P DM86S DM86H DM86P DM87S DM87H DM87P Segmented Dry Small Diameter blades for Electric Saws Economy Green Small Diameter Dry Blades Size E4000 Cat. No. 4" x .070 23754 4-1/2" x .070 23857 7" x .080 23756 • Fast, smooth cutting in a wide range of brick, block, concrete pavers, marble & stone • High Diamond Concentrations & Advanced Metal Bond Technology • Very competitively priced • Cut at a constant depth of cut with less dust than abrasive blades • Cuts brick, block, concrete pavers, concrete, marble and stone • These blades increase operator safety and reduce time spent on blade changes • May be used wet or dry • Laser welded for added safety & performance in wet and dry applications Standard Gold Masonry Blades Size DM80S DM85S Cat. No. Cat. No. 10" x .110 11947 11948 12" x .110 11952 11954 14" x .110 11959 11961 18" x .125 28288 11973 20" x .140 11976 11977 Specifications Application Hard Materials Fast Cutting Hard Brick General Purpose Comb. Brick/Block General Purpose Comb. Brick/Block Long Life Abrasive Brick/Block Long Life • For use on hand-held circular saws and most right angle grinders • Diamond blade maintains a constant depth of cut with fewer blade changes than abrasive blades • Provide fast, free cutting in concrete, block, marble, soft granite, stone, tile and other materials Heavy Duty Orange HPT7H Dry/Wet Masonry blades Dry/Wet Masonry Blades (continued) Heavy Duty Orange Small Diameter Dry Blades Size E2H E5H Cat. No. Cat. No. 4" x .070 11242 11244 4-1/2" x .070 11249 11253 5" x .080 11257 11259 5-1/2" x .080 16300 11260 6" x .080 11263 11264 7" x .080 11268 11274 8" x .080 11290 11293 9" x .080 11297 11302 Standard Gold Small Diameter Dry Blades Size E2S E5S Cat. No. Cat. No. 4" x .070 11344 11346 4-1/2" x .070 11347 11349 5" x .080 11350 11351 5-1/2" x .080 17232 28289 6" x .080 11352 16866 7" x .080 11355 11357 8" x .080 11359 11360 9" x .080 11362 11364 X-tra Plus Red Small Diameter Dry Blades Size E2X E5X Cat. No. Cat. No. 4" x .070 11366 11368 4-1/2" x .070 11370 11373 5" x .080 11374 11375 5-1/2" x .080 28290 11376 6" x .080 11378 11379 7" x .080 11380 11381 8" x .080 11383 11386 9" x .080 11387 11388 Specifications Application General Purpose Smooth Cutting Long Life Abrasive Materials Long Life WWW.HANESSUPPLY.COM Economy Green E4000 –– Premium Black Small Diameter Dry Blades Size E2P E5P Cat. No. Cat. No. 4" x .070 11304 11305 4-1/2" x .070 11307 11308 5" x .080 11310 11311 5-1/2" x .080 18197 11312 6" x .080 11315 11316 7" x .080 11319 11322 8" x .080 11338 11339 9" x .080 11340 11342 Standard Gold E2S E5S X-tra Plus Red E2X E5X Heavy Duty Orange E2H E5H Premium Black E2P E5P Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Diamond Dry Tuck Pointing blades Economy Green General Purpose Dry Tuck Point Blades Size DT4000 Cat. No. 3" x .250 –– 4" x .250 26151 4-1/2" x .250 27950 HD Orange Gen. Purpose Dry Tuck Point Blades Size DT9H Cat. No. 3" x .250 –– 4" x .250 12418 4-1/2" x .250 12429 12437 5" x .250 7" x .250 12446 12454 8" x .250 Standard Gold General Purpose Dry Tuck Point Blades Size DT9S Cat. No. 3" x .250 –– 4" x .250 12462 4-1/2" x .250 12466 5" x .250 12470 12475 7" x .250 8" x .250 12476 Specifications Econ. Application Green General Purpose DT4000 Long Life High Performance –– –– HD Orange DT9H Crack Chasing “v” blades –– Heavy Duty Orange Spiral Turbo Cup Grinder w/10 segs Heavy Duty Orange Spiral Turbo Cup Grinder w/10 segs Standard Gold Spiral Turbo Cup Grinder w/10 segs Standard Gold Spiral Turbo Cup Grinder w/10 segs Heavy Duty Orange Spiral Turbo Cup Grinder w/12 segs Heavy Duty Orange Spiral Turbo Cup Grinder w/12 segs Heavy Duty Orange Spiral Turbo Cup Grinder w/24 segs Heavy Duty Orange Spiral Turbo Cup Grinder w/24 segs Standard Gold Spiral Turbo Cup Grinder w/12 segs Standard Gold Spiral Turbo Cup Grinder w/12 segs Standard Gold Spiral Turbo Cup Grinder w/24 segs Standard Gold Spiral Turbo Cup Grinder w/24 segs HPTD9H • Cleans routs and repairs cracks in concrete and other materials • Fast cutting and long lasting blade with laser welded diamond segs that leave a clean groove • Available in 4-inch and 7-inch sizes • Designed for use on small angle grinders • Segmented design provides longer life and faster cutting than competitive blades Dry Tuck Pointing Pins • Great for cleaning out mortar from hard to reach mortar joints and butt (vertical) joints • Grinds out a butt joint in seconds (with no damage to existing blocks) • Use on CORE CUT Flex Pin Grinder • Grinding pins may be usable on other routers (please call for details) Size 4" x 5/8-11 4" x 7/8 4" x 5/8-11 4" x 7/8 7" x 5/8-11 7" x 7/8 7" x 5/8-11 7" x 7/8 7" x 5/8-11 7" x 7/8 7" x 5/8-11 7" x 7/8 T5H Cat. No. 17943 20710 ----15095 18155 15096 18396 --------- T5S Cat. No. ------17846 23177 ------------16410 17834 15263 18641 WHICH CUP GrINDEr SHOULD YOU USE? Single row - For general application grinding and material removal Double row - Ideal for heavier material removal and for steep slopes ring - Continuous surface grinder results in smooth cutting and prevents segs from falling off Turbo - When you need grinding done at a maximum speed HP Stag. Seg. –– Crack Chasing “V” Blades* Size Catalog No. 4" x .250 27542* 7" x .250x5/8-11 26719 *Available in 5/8-11 or 10mm threaded hub • The most efficient way to grind all types of concrete, masonry, brick, block and stone • Ring Cup Grinder is ideal for beveling, smoothing and shaping concrete, masonry and stone surfaces • May be used on most right-angle grinders • Use the turbo and single row cup grinders for faster removal of material • Use the double row grinder for heavy removal Dry Spiral Turbo Cup Grinders Description High Performance Staggered Segment Dry Tuck Point Blades Size HPDT9H Cat. No. –– 3" x .250 4" x .250 11697 11698 4-1/2" x .250 5" x .250 11700 7" x .250 11702 8" x .250 16638 Std. Gold DT9S Dry Segmented Cup Grinders Dry Ring Turbo Cup Grinders Description Ring Turbo Cup Grinder w/Fine Grit Ring Turbo Cup Grinder w/Medium Grit Ring Turbo Cup Grinder w/Course Grit Ring Turbo Cup Grinder w/Fine Grit Ring Turbo Cup Grinder w/Medium Grit Ring Turbo Cup Grinder w/Course Grit Size Catalog No. 4" x 7/8 ---4" x 7/8 26060 4" x 7/8 23329 4" x 5/8-11 19546 4" x 5/8-11 17539 4" x 5/8-11 23051 Standard Gold & Heavy Duty Orange Dry Segmented Cup Grinders Standard Gold Heavy Duty Orange Size/Application Bond/Catalog No. Bond/Catalog No. 4" Single Row S5S 07442 S5H 00015 4" Double Row D5S 07429 D5H 00016 4" Ring R5S 07439 R5H 07385 5" Single Row S5S 28508 S5H 07404 5" Double Row D5S 07431 D5H 07370 7" Single Row S5S 07450 S5H 00017 7" Double Row D5S 07434 D5H 00018 Bond KT5HF KT5HM KT5HC KT5HF KT5HM KT5HC NOTE: All Cup Grinders come with 5/8" - 11 Threaded Arbor Specifications Application 4" Single Row 4" Double Row 4" Ring Type 4" Turbo Grinder 7" Single Row 7" Double Row Std. Gold S5S D5S R5S T5S S5S D5S HD Orange S5H D5H R5H T5H S5H D5H Heavy Duty Orange Vertical Tuck Pointing Grinding Pins* Size VT2H Cat. No. 1/4" Diameter Grinding Pin 12524 3/8" Diameter Grinding Pin 12529 *Tuck pins have 5/16" shaft, 1/4" shaft available Specifications Application General Purpose Vertical Tuck Pointing HD Orange VT2H WWW.HANESSUPPLY.COM 22 - 9 22 Cutting Tools • For use on hand-held circular saws and small, right-angle grinders • Two styles of tuck pointing blades: - General Purpose (in 3 quality grades) - High performance staggered segment • Provide constant depth of cut and far fewer blade changes compared to abrasive blades • For long life removal, choose the general purpose blade • When higher removal speed is needed, select our staggered segment high performance tuck pointing blade Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Diamond Dry and Wet Tile blades Dry Tile blades • A great value for fast, chip-free cutting in a wide variety of tile, masonry and stone • Use wet or dry on tile saws • Can be used on right-angle grinders and hand saws • Special air hole design for cooler operation and longer life • pecial metal bond designed especially for dry cutting Heavy Duty Orange Dry Tile Blades Size (in) 4" x .060 x 5/8" 5" x .060 x 5/8" 6" x .060 x DIAMOND-5/8" 7" x .060 x DIAMOND-5/8" 8" x .060 x 5/8" 10" x .060 x 5/8" General Purpose-Smooth Cutting: Heavy Duty Orange (TD2H) Specifications Application General Purpose Smooth Cutting TD2H Cat. No. 12508 12510 12512 12515 12517 12519 Heavy Duty Orange TD2H • Rugged construction • Fast smooth cutting • Long blade life Available in three rim depths: Standard Gold - .187" Heavy Duty Orange - .250" Premium Black - .375" (.25" rim for 12" and 14" blades) Size 3-3/8" x .050 x 5/8" 4" x .060 x 5/8" 6" x .060 x 5/8" 7" x .060 x 5/8" 8" x .060 x 5/8" 9" x .060 x 5/8" 10" x .060 x 5/8" 12" x .080 x 1" 14" x .080 x 1" Specifications Application General Purpose Smooth Cutting WT1S Std. Gold Cat. No. 12374 12375 WT1H WT1P HD Orange Prem. Black Cat. No. Cat. No. 13522 12340 12346 12517 12352 12355 12359 13512 23838 Standard Gold WT1S Heavy Duty Orange WT1H 12377 12379 Premium black Core bit Our Premium Black bit is the industry standard. Its very high diamond concentration gives maximum footage and drilling speed. Designed for all types of wet drilling. Good in moderate to high steel applications. Choose Premium Black for your lowest total drilling cost. Specifications P33F - Hard Aggregate POL - General Purpose, Fast Cutting P64L - Asphalt/Block, Long Life Size POL P33F P64L (in) Cat. No. Cat. No. Cat. No. 1/2 05826 05820 28585 05917 05912 28586 5/8 3/4 05962 05957 28587 7/8 06004 05998 25115 1 05293 05286 19871 1-1/8 05338 23309 28588 05373 22003 1-1/4 05381 1-3/8 05404 05399 28589 05427 05438 1-1/2 05441 1-5/8 05472 18689 28594 1-3/4 05483 05476 28595 1-7/8 05509 28580 28596 2 05529 05516 05525 05565 23771 2-1/4 05571 2-1/2 05607 05596 28597 2-3/4 05629 28581 28598 3 05661 05643 21246 3-1/4 05688 26748 05686 3-1/2 05709 22306 28599 Wet Tile blades Wet Tile Blade Sizes Diamond Nuts & Drilling rigs WET DIAMOND COrE bITS: 12364 12368 12369 12370 Premium Black WT1P Heavy Duty Orange Core bit The Heavy Duty Orange bit is our most popular bit. It has a high diamond concentration for excellent footage and cutting speed. Designed for all types of wet drilling applications with light to moderate steel. Go with Heavy Duty Orange for the best general purpose bit on the market. Specifications H33F - Hard Aggregate HOL - General Purpose, Fast Cutting H64L - Asphalt/Block, Long Life Size HOL (in) Cat. No. 1 04812 1-1/8 04837 1-1/4 15509 1-3/8 04874 1-1/2 15525 1-5/8 04907 1-3/4 04910 1-7/8 04920 2 15479 2-1/4 04959 2-1/2 00004 2-3/4 04992 3 00005 3-1/4 05032 3-1/2 00006 4 00007 4-1/4 05079 H33F Cat. No. 21156 04835 04859 19356 04886 19933 21343 19934 04926 04955 04972 04991 04999 28616 22376 05052 05075 H64L Cat. No. 04810 27000 25596 25597 28619 28620 28621 28622 04934 04957 04976 28623 05013 28624 28625 05060 05077 Size (in) 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 Part No. 4010476 4010477 4010478 4010479 4010480 4010481 4010482 4010483 4010484 WWW.HANESSUPPLY.COM Size HOL H33F H64L (in) Cat. No. Cat. No. Cat. No. 4-1/2 5 5-1/2 6 6-1/4 6-1/2 7 8 9 10 12 14 16 18 20 24 Expansion Adapters 22 - 10 Size POL P33F P64L (in) Cat. No. Cat. No. Cat. No. 4 05761 05742 05753 05782 05788 4-1/4 05791 4-1/2 05805 28582 23173 5 05843 05831 24580 5-1/2 05867 27102 28600 6 05892 20265 05886 6-1/4 05921 05919 28601 6-1/2 05927 28583 28602 7 05945 26932 28603 05984 05969 05980 8 9 06013 28584 28604 10 05306 27971 28605 12 05361 05351 05359 14 05417 05412 28606 05462 26250 28607 16 18 05498 26254 05496 20 05536 26258 28608 24 05584 26262 05583 Size (in) 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 4 4-1/4 4-1/2 00008 00009 05117 00010 05144 05151 05163 05183 05199 04822 04853 04882 04903 04918 04947 04968 Part No. 4010485 4010486 4010487 4010488 4010489 4010490 4010491 4010492 4010493 05083 05101 27758 05123 20285 05148 19092 05176 05196 04815 04841 04877 18777 04914 28617 28618 05086 05107 28626 05131 05143 05150 24977 05180 28627 04820 04848 24889 25130 28628 28636 04966 Size (in) 5 5-1/2 6 6-1/4 6-1/2 7 8 9 10 Part No. 4010494 4010495 4010496 4010497 4010498 4010499 4010500 4010501 4010502 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Standard Gold Core bit Diamond DrY DIAMOND COrE bITS: Dry Diamond Hole Saws An excellent general purpose bit with good diamond concentration for fast drilling. Designed for the occasional driller with average to light duty wet drilling. Specifications SMF - General Purpose, Fast Cutting SHL - Asphalt/Block, Long Life SMF Cat. No. 06206 06208 06210 06213 06217 25241 06219 06225 06228 06231 06235 Specifications DH - Block and Soft Brick SMF Cat. No. 06236 06239 06241 06243 06244 06245 06247 06195 06201 06204 Size (in) 5-1/2 6 6-1/4 6-1/2 7 8 9 10 12 14 Large Diameter Core bits • Core Bore - the originator of lightweight spoked hub large diameter bits • Standard with our unique 45° radial water sprayer • In standard sizes to 48" (we can make them up to 72" - any diameter quoted upon request) • May be ordered with a variety of hub styles and thread sizes Heavy Duty & Premium Large Diameter Core Bits Size No. of HD Orange Prem. Blk. (in) Segs HOL Cat. No. POL Cat. No. 26 40 04986 05622 43 04996 05632 28 30 46 05023 05671 32 49 05031 05682 34 52 28641 05696 36 56 25778 05721 38 60 28642 05740 40 62 28643 24832 42 65 28644 05781 44 68 41642 05797 46 71 41643 32564 48 74 28055 05817 Premium black Turbo bits The Premium Black Turbo is our most popular Turbo bit. It has a very high diamond concentration for excellent performance in heavy to very heavy steel applications. Combine this excellent diamond concentration with its fluted segment design and you have a bit that flies through just about anything. Specifications TPOWL - General Purpose, High Steel Size (in) 2 2-1/2 3 3-1/2 4 4-1/2 TPOWL Cat. No. 06960 06966 06969 06972 06974 06978 Size (in) 5 6 8 10 12 TPOWL Cat. No. 06979 06982 06988 06955 06956 HD Orange Turbo bits Our Heavy Duty Orange Turbo bit has very good diamond concentration for excellent speed in moderate to heavy steel applications. This bit is one of the fastest general purpose bits available. Specifications TH - General Purpose, Moderate Steel Size (in) 2 2-1/2 3 3-1/2 4 4-1/2 THOWF Cat. No. 06887 06892 06895 06897 06900 06904 Size (in) 5 6 8 10 12 THOWF Cat. No. 06906 06909 06913 27010 06881 The radial sprayer of our large diameter bits gets water to the tube and segments where it is needed. HD Drill Grinder Orange Drill Grinder Max/Min Dia. (in) Cat. No. Min. Amps RPM 04771 6 6000/2300 7/8 1 04706 6 6000/2300 1-1/4 04711 6 6000/2300 04717 7 5000/1600 1-1/2 1-3/4 04720 7 5000/1600 00011 7 5000/1200 2 2-1/4 04727 7 5000/1200 2-1/2 00012 7 5000/1200 3 00013 7 5000/800 3-1/2 00014 10 5000/800 04745 10 5000/700 4 4-1/2 04751 10 5000/700 5 04756 10 2500/700 6 04764 10 2500/600 With 5/8 - 11" thread & 9" drilling depth std. Dry Hole Saw Notes: 1. Not all types of brick and block drilled. Please consult factory. 2. All bits have 5/8" 11 threads. 3. All bits have 9" drilling depth. 4. Jacobs Chuck Adapter available for hammer drills 5/8" - 11 thread to straight shank. Dry Hole Saw Accessories Part Description Cat. No. 1/2" x 12" Carbide Drill Starter Bit with “A” Taper Shank for 5/8" - 11 00033 5/8" - 11 female to 5/8 - 11 male pilot adapter 01902 Dry Diamond vacuum bits Designed for drilling dry in cured concrete*, brick, and block. Run on standard core drill motors or high speed grinders. This bit takes up where the Dry Hole Saw leaves off. Specifications DVH - Cured Concrete, Brick Dia. HD Orange Drill Grinder (in) Cat. No. Max/Min RPM 1-1/2 04775 5000/1600 1-3/4 04777 5000/1600 2 04780 5000/1200 2-1/4 04782 5000/1200 2-1/2 04785 5000/1200 3 04789 5000/800 3-1/2 04793 5000/800 4 04796 5000/700 4-1/2 04799 5000/700 5 04802 2500/700 6 04805 2500/600 With 1.250" - 12 thread & 9" drilling depth std. Dry Hole vacuum bit Notes: 1. Do not use in applications with steel heavier than wire mesh. 2. All bits have 1.250" - 12 threads. 3. All bits have 9" drilling depth. WET DIAMOND COrE bITS: resegmented bits Save money by recycling your used core bits. The bigger the bit, the more you save. Send us your used bits, ours or a competitors, and we will cut off the end and put new segments on it for a bit as good as new. Bits may be resegmented with Premium Black, Heavy Duty Orange, Standard Gold, Turbo Orange or Turbo Black segments. Send us your used bits today. Bit Dia (in) 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 3 3-1/2 4 4-1/2 5 5-1/2 Bit Dia (in) 6 6-1/2 7 8 9 10 12 14 16 18 20 24 WWW.HANESSUPPLY.COM 22 Cutting Tools Size (in) 2 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 4 4-1/4 4-1/2 5 Our Dry Hole Saws are the best in the business. We were the first to introduce them and nobody sells more. Drill dry through block and brick in seconds. No water needed for easy cleanup. 22 - 11 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Lenox® Lenox® Demolition recips - reciprocating blades “The Ultimate” Cut bLADE CONSTrUCTION Electron Beam Weld High Speed Steel Edge Rc 65-66 Standard Tooth V Tooth 60° Angle (Plaster Blade 636RP Only) Vari-Tooth® Features: • Bi-metal construction • Matrix II type alloy high speed steel cutting edge (8% cobalt edge) • Tooth hardness Rc 65-66 • Precision milled teeth • 17° tooth back clearance angle 656R, 956R, 156R, 676RC, 966R • Angled tang Advantages: • Shatter resistant • Shock resistant teeth • High wear resistance • High heat resistance • More aggressive cut benefits: • Cuts through tough materials including nail-embedded wood • Longer life • Retains tooth sharpness longer • Increases productivity • Faster cutting Heavy-Duty recips Designed Especially for Higher Amp Machines Fire and Rescue specialists can't take chances with the blades they use. That’s why they choose Lenox 650R or 960R Demolition blade. • Extended life when cutting pipe, structural steel and stainless steel. Fire and rescue. Blade Specifications – 2 Per Pack Product No. Application 650R Stainless steel: 3/16" – 3/4" 6514R Stainless steel: 3/32" – 3/8" 6518R Stainless steel: 1/16" – 1/4" 9514R Stainless steel: 3/32" – 3/8" *Tuff Tooth TM LxWxT (in) 6 x 3/4 x .050 6 x 3/4 x .050 6 x 3/4 x .050 9 x 3/4 x .050 Master-Grit® recip blades bLADE CONSTrUCTION Teeth Per Inch* 10/14 14 18 14 6150 Alloy Steel Spring Tempered Backing Grit Hardness RA 90-93 Featured here is the Lenox 966R cutting cleanly through angle iron, wood and metal pipe – all at the same time. Would you expect that from a wood-cutting blade? Blade Specifications – 2 Per Pack Product No. Application 6066R Demolition work in nail-embedded wood. 966R Demolition work in nail-embedded wood. 960R Demolition work in wood and metal. Fire and rescue. Demolition work in nail-embedded wood. 106R *Tuff Tooth 22 - 12 LxWxT (in) 6 x 3/4 x .032 8 x 3/4 x .040 10 x 3/4 x .050 6 E-Style & E-r bi-Metal reciprocating blades Features: • Bi-metal construction • High speed steel cutting edge • Tooth hardness Rc 64-66 Advantages: • Tough shock resistant alloy with less tooth chippage • Withstands high cutting temperatures • Virtually unbreakable benefits: • Lasts longer • Attains higher productivity than all-hard or carbon steel blades • Increases blade life Machine Applications: Used in Rems, Roller, Rex, Flex, Ridgid & Asada reciprocating machines. E-Style Blade Specifications – 5 Per Vinyl Pouch Product No. Application 20405-508E Pipe, structural steel, stainless steel, non-ferrous metal: 5/32" & thicker. Nail-embedded wood. 20408-808E Pipe, structural steel, stainless steel, non-ferrous metal: 5/32" & thicker. Nail-embedded wood. L x W x T Teeth Per (in) Inch 5-1/2 x 1 x .062 8 8 x 1 x .062 8 E-Style Blade Specifications (Double Tang) – 5 Per Vinyl Pouch Product L x W x T Teeth Per No. Application (in) Inch 20483-608ER Pipe, structural steel, stainless steel, non-ferrous 5-1/2 x 1 x .062 8 metal: 5/32" & thicker. Nail-embedded wood. 20484-708ER Pipe, structural steel, stainless steel, non-ferrous 7-7/8 x 1 x .062 8 metal: 5/32" & thicker. Nail-embedded wood. 20482-110ER Flexible blade. Nail-embedded wood, pallets. 11-3/4 x 1 x .035 10/14 Metal 1/8" – 1/2" thick. Tungsten Carbide Continuous Edge Grit Particles Edge Medium Carbide Grit 12 x 7/8 x .062 Teeth Per Inch 6 6 10* TM Master-Grit’s tungsten carbide grit edge looks different from regular blades because it is different. It is the only edge that will cut abrasives like fiberglass, granite, cement, plywood and the list goes on... Blade Specifications – 2 Per Pack Product No. Application 6000RG Cast iron, fiberglass, ceramic 800RG wall tile, clay pipe, stone. 100RG LxWxT (in) 6 x 7/8 x .062 9 x 7/8 x .062 9 x 7/8 x .062 WWW.HANESSUPPLY.COM Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools 5 Per Vinyl Pouch Lenox Lenox® Product No. 2 Per Blister Packed Vinyl 1 Per Card/5 Pouch Cards per Pk. Bulk Packed 50 Per Plastic Container LxW xT (in) Teeth Per Inch 20573-S656R 20543-B656R 6 x 3/4 x .050 6 20572-656R 20586-S156R 20582-956R 20584-S110R 20547-B110R 12 x 3/4 x .050 10/14 20551-S414R 20526-B414R 4 x 3/4 x .035 14 20519-S314RC 20564-614R 20565-S614R 20553-S418R 20566-618R 20567-S618R 20578-818R 20563-S818R 20521-318RC 20522-S318RC 20568-624R 20569-S624R 20554-424R 20570-636RP 20555-S424R 20505-600RG 20576-800RG Extra fast cutting in thick, nail-free wood. 6 x 3/4 x x.035 20520-314RC 20552-418R 4 20539-B610R 20581-S810R 20550-414R Contour cutting in all woods, nail-embedded wood & composition materials. 20561-S610R 20580-810R 20583-110R 6 20536-B606R 20574-S634R 20562-610R 6 x 7/16 x .050 20559-S606R 20575-634R 20571-S636RP 20544-B810R 20540-B614R 20527-B418R 20541-B618R 20528-B424R 20542-B624R 20538-B636RP 9 x 3/4 x .050 6 x 3/4 x .035 6 x 3/4 x .035 8 x 3/4 x .050 3 x 1/4 x .032 6 x 3/4 x .035 4 x 3/4 x .035 20593-6514R 20594-6518R 20511-9514R 10 14 14 18 18 4 x 3/4 x .035 6 x 3/4 x .035 6 x 3/4 x .050 6 x 3/4 x .032 18 6 10 6 x 3/4 x .050 10/14 6 x 3/4 x .050 14 9 x 3/4 x .050 Pipe, structural steel, stainless steel: 3/32"–1/4". Non-ferrous metal: 3/32" – 3/8". Hard Rubber. Structural steel, pipe, conduit, stainless steel: 1/16"–3/16" thick. Non-ferrous metal: 1/16"–5/16". Pallet cutting for 618R & 818R blades only. Contour cutting in metal: 1/16"–1/8" thick. For plaster, plaster board, & lath. Bi-directional cutting. 6 6 x 3/4 x .050 Contour cutting in wood < 3/4" thick & in metal 3/32"–5/16" thick. 6 24 6 x 7/8 x .062 6 x 3/4 x .050 Nail-embedded wood, composition materials, and plastics. Pipe, carbon steel, stainless steel: 1/8"–1/4" Non-ferrous metal: 1/8"–1/2" thick. All metals less than 1/8" thick. Tubing, conduit, trim. 8 x 3/4 x .040 9 x 7/8 x .062 Fast cutting for wood, composition materials, plastics, and non-ferrous metal. 24 Med. Carbide Grit 9 x 7/8 x .062 20591-6510R 10 3 x 1/4 x .032 8 x 3/4 x .035 20598-966R 20592-650R 6 18 10 x 3/4 x .050 20597-960R 6 6 x 3/4 x .035 20506-100RG 20512-6066R Roughing-in work & nail-embedded wood. Fast cutting. Pipe, structural steel, stainless steel, non-ferrous metal: 3/16" & thicker. 6 20545-B956R 20557-S676RC Recommended Use 12 x 3/4 x .050 20587-S956R 20556-676RC 20560-606R 20546-B156R Shape 10 18 14 Assortment–Product No. 20502-546A. One ea. 414R, 418R, 614R, 618R, 656R, Vinyl Pouch. WWW.HANESSUPPLY.COM 22 Cutting Tools 20585-156R ® Cast iron, fiberglass, ceramic tile, clay pipe, stone, brick, plaster, marble. Demolition work in nail-embedded wood. Demolition work in wood & metal. Fire & rescue. Heavy-duty. Extended life when cutting pipe, structural steel, stainless steel: 3/16"–3/4". Fire & rescue. Heavy-duty. Extended life when cutting pipe, structural steel, stainless steel: 1/8"–1". Fire & rescue. Heavy-duty. Extended life when cutting pipe, structural steel, stainless steel: 3/32"–3/8". Fire & rescue. Heavy-duty. Extended life when cutting pipe, structural steel, stainless steel: 1/16"–1/4". Fire & rescue. Heavy-duty. Extended life when cutting pipe, structural steel, stainless steel: 3/32"–3/8". Fire & rescue. 22 - 13 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Milled Jig Saw blades Spring Steel Back High Speed Steel Cutting Edge Precision Milled & Set Teeth Lenox® Electron Beam Weld Rc 65-68 Tooth Hardness Features: • Bi-metal construction • Precision milled teeth • 8% cobalt high speed steel cutting edge • Tooth hardness Rc 65-68 • 0° tang angle • Tangs to fit all major manufactures of jig saw machines Advantages: • Shatter resistant • Shock resistant teeth • High wear resistance • High heat resistance benefits: • Cuts through most materials including stainless steel & nail-embedded wood • Longer life • Retains tooth sharpness longer • Increases productivity • Faster cutting Universal Style bi-Metal Jig Saw blades Application Fast, Rough Cutting in Wood & Composition Material: 3/8" – 2" Thick. Fast, Rough Cutting in Wood and Composition Material: 3/8" – 3-1/2" Thick. Wood, Nail-Embedded Wood: 1/4" – 2" Thick. All Steels: 1/8" – 1/2". Soft Metals: 1/8" – 1". Flush Cutting in Wood: 1/4" – 1 " Thick. Contour Cuts in Wood: 3/16" – 1" Thick. Soft Metals:1/8" – 3/8". Fast, Clean Cutting in Wood, Plastic & Composition Material: 3/8" – 2" Thick. Clean Contour Cuts in Wood, Plastic & Composition Material: 3/8" – 1-1/2" Thick. Fast, Smooth cuts in Wood, Plastic & Composition Material: 3/16" – 1-1/2" Thick. Chip-free Down Cutting in Formica, Laminate & Plastic: 3/16" – 1-1/2" Thick. Fine Contour Cutting in Wood, Veneer, Laminate & Plastic: 1/16" – 1/2" Thick. Clean Cuts in Wood: 3/16" x – 1-1/2" Thick. Cordless Saws Wood, Plastic: 3/16" – 1". Steels: 1/8" – 3/8". Non-ferrous Metal: 1/8" – 3/4". Contour Cuts in all Steels: 1/16" – 3/16" thick & Soft Metal: 1/16" – 5/16". Steels: 3/32" – 1/4". Non-ferrous Metal: 3/32" – 3/8" Stainless Steel, Structural Steel: 1/16" – 3/16". Non-ferrous Metal: 1/16" – 5/16" Stainless Steel, Sheet Metal: < 1/8" Thick. Non-ferrous Metal: < 1/4" Thick. Cordless Saws. Sheet Metal: < 1/8" Thick. Non-ferrous Metal: < 1/4" Thick. Cast Iron, Fiberglass, Ceramic Tile, Hard Plaster. 5 Per Vinyl PouchEnglish Only 20620-486J 5 Per Blister Packed CardMultiLanguage* 20652-F486J 20622-480J 20654-F480J 20607-686J 20628-356JF 20690-350JC 20608-456J 20658-F686J 20653-F456J Ground Jig Saw blades High Speed Steel Cutting Edge Precision Ground (smoother cut) Features: • Bi-metal construction • Precision ground teeth • Fleam ground & hollow ground • Side clearance • 8% cobalt high speed steel cutting edge • Tooth hardness Rc 65-68 • 0° tang angle • Tangs to fit all major manufacturers of jig saw machines Advantages: • Shatter resistant • Shock resistant teeth • High wear resistance • High heat resistance benefits: • Longer life • Retains tooth sharpness longer • Increases productivity • Faster cutting • Cuts through nail-embedded wood • Smooth finish Bulk Packed50 Per Box English Only 20603-B486J Length x Width x Thickness (in) 4-1/2 x 3/8 x .050 Teeth Per Inch 6 Milled or Ground Milled 20631-US480J 20604-B480J 4-1/2" x 3/8" x .050 10 Milled 20626-US686J 20683-S686J 20634-US356JF 20699-US350JC 20629-S356JF 20691-S350JC 20627-US456J 20672-S480J 20671-S456J 20647-F416JC 20630-US416JC 20675-S416JC 20615-450JR 20649-F450JR 20633-US450JR 20677-S450JR 20617-430J 20650-F430J 20637-US430J 20678-S430J 20616-320JC 20648-F450J 20640-F320JC 20632-US450J 20636-US320JC 20676-S450J 20646-F340JV 20635-US340JV 20688-S340JV 20610-314J 20611-318J 20621-518J 20612-324J 20641-F314J 20643-F318J 20656-F518J 20644-F324J 20655-US314J 20666-US318J 20667-US518J 20688-US324J 20660-S314J 20661-S318J 20681-S518J 20662-S324J 20623-424J 20624-300JG 20642-F318JC 20651-F424J 20639-F300JG 20657-US318JC 20669-US424J 20673-US300JG 20663-S318JC 20679-S424J 20605-B450J 20674-B314J 20680-B318J 20682-B324J 20665-S300JG WWW.HANESSUPPLY.COM 6 3-1/2" x 1-1/8" x .050 3-1/2" x 1/4" x .050 6/10 10 4" x 1/4" x .050 6 4" x 5/16" x .050 Milled Milled Milled 6 Ground Ground 10 4" x 5/16" x .050 10 4" x 3/8" x .037 10 3" x 3/16" x .050 7 Piece Assortment: English Only Product No. 20606-U743JA One ea. 486J, 480J, 340JV, 450J, 314J, 318J, 324J. Vinyl Pouch. 7 Piece Assortment: Multi-Language* Product No. 20693-743JA One ea. F486J, F340JV, F450J, 314J, F324J. Plastic Box. 3 Piece Assortment: English Only Product No. 20600-U343JA One ea. 486J, 314J, 324J. Vinyl Pouch. 3 Piece Assortment: Multi-Language* Product No. 20692-343JA One ea. F486J, F324J. Vinyl Pouch. * Multi-language packaging includes English, German, French, Italian and Spanish. 22 - 14 6" x 3/8" x .050 4-1/2" x 5/16" x .050 20664-S320JC 20638-340JV 20619-318JC Rc 65-68 Tooth Hardness Product No. 1 Per Blister Packed Card (5 Cards/Pack) English MultiOnly Language* 20625-US486J 20670-S486J 20613-416JC 20614-450J Electron Beam Weld Spring Steel Back Ground Ground 20 Ground V 3-1/2" x 3/8" x .037 10/14 Milled 3" x 3/8" x .037 3" x 3/8" x .037 5-1/4" x 3/8" x .050 3" x 3/8" x .037 14 18 18 24 3" x 5/16" x .032 Med. Carbide Grit 3" x 3/16" x .037 4" x 3/8" x .025 Ground 18 Ground 24 Milled Milled Milled Milled Milled Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Lenox bayonet Style bi-Metal Jig Saw blades Hand Hacksaw blades Electron Beam Weld Features: • Bi-metal construction • Spring steel back • M-2 high speed steel cutting edge • Tooth hardness Rc 64-66 Advantages: • Virtually unbreakable • Shatter resistant • Shock Resistance • High heat resistance Bulk Packed 100 Per Box 20110-018HE 20111-024HE 20112-032HE 20116-218HE 20117-224HE 20118-232HE Standard Tooth benefits: • Lasts longer • Safer than solid high steel blades • Outperforms carbon steel up to 10 to 1 • Increases blade life • Easier to push through the cut • Smoother cut • Freer cutting action • Faster cutting Blister Packed 10 Per 1 Per Card/ Vinyl Pouch 10 Cards Per Pack 20140-V018HE 20150-S018HE 20141-V024HE 20151-S024HE 20142-V032HE 20152-S032HE 20143-V214HE 20144-V218HE 20154-S218HE 20145-V224HE 20155-S224HE 20146-V232HE 20156-S232HE 4012 Hacksaw Frame Milled or Ground Milled Milled Milled Milled Milled Milled Milled Milled Spring Steel Back High Speed Steel Edge Product No. Length x Width x Teeth Thickness Per (in) Inch 3" x 3/8" x .032 6 3" x 3/8" x .032 10 1-3/4" x 1/4" x .032 10 3" x 3/8" x .032 14 1-3/4" x 1/4" x .032 14 3" x 3/8" x .032 18 1-3/4" x 1/4" x .032 18 1-3/4" x 1/4" x .032 24 2012 Hacksaw Frame Length x Width (in) 10 x 1/2 10 x 1/2 10 x 1/2 12 x 1/2 12 x 1/2 12 x 1/2 12 x 1/2 Teeth Per Inch 18 24 32 14 18 24 32 1. Lever tensions the 12" hacksaw blade to 30,000 psi (about twice that of ordinary frames). 2. Mount blade at 45° for flush cutting jobs. 3. Use frame as jab saw (set screw holds blade in position). 4. Use as a compass saw with No. 20585-156R reciprocating blade. 5. Store spare blades inside tubular back. Prod. No. Desc. 20918-4012 High tension handsaw frame 1 per sleeves/5 per box Features: • Heavy-duty aluminum handle • Rectangular steel crossbar • Blade storage • Converts to jab or compass saw Permanent hardened/serrated blade holding pins • Blade tensions to 30,000 psi • Steel tensioning nut • Fold away tension lever • 45° blade holder pins for flush cutting Advantages: • Resists breakage • Easy to use • No need to replace blade holder pins • No blade twisting benefits: • Strong • Saves time/improves productivity • Safe to use • Straighter cuts • Convenient • Longer blade life • Versatile • Fast cutting • Easier to push through the cut Features: • All metal construction, including zinc-plated bar and cast aluminum handle • Larger throat • Enlarged handle grip opening • Complete with 12" Lenox bi-metal hacksaw blade Advantages: • Resists corrosion & breakage • Lightweight • Deep cutting • Protects hands and fingers • Ample room for work gloves • Highest tension of any frame in its class • Cannot over tension • No blade twisting 975 Hacksaw Prod. No. 20919-2012 Desc. Heavy-duty aluminum handle hacksaw frame w/ 12" bi-metal blade 1 Per Sleeve/5 Per Box benefits: • Lasts longer • Easy to work with • Cuts wider assortment of material sizes • Safer • More convenient & economical • Straighter, cleaner cuts • Longer blade life • Improves productivity Features: • Rugged heavy-duty aluminum handle • Complete with 10" Lenox hacksaw blade Advantages: • Resists breakage • Lightweight Prod. No. benefits: 20975-975 • Strong • Economical • Convenient • Designed for the hard-to-get-at job Tri-Fold® Saw Desc. Rugged heavy-duty aluminum handle. Designed for hard-to-get-at places. Cuts bolts, wire, tubing and plastic. Includes bi-metal 10" blade. 1 Card Per/5 Per Box Features: • Heavy-duty aluminum handle • Complete with 6" Lenox Reciprocating Blade • Blade folds away safely • Locks in 3 positions Comfortable hand grip • Hanging hole in handle • Accepts reciprocating blades using 1/2" tang Advantages: • Resists breakage • Easy to use • Lightweight • Easy blade change benefits: • Cuts in hard-to-get-at places Prod. No. • Easy to carry on the job/fits in your pocket 20992-3636 • Safe to use 20993-3618 • Saves time WWW.HANESSUPPLY.COM Desc. Tri-Fold® Saw Wood, drywall & non-metallic Tri-Fold® Saw Metal Cutting 1 Per Clam/5 Per Box 22 - 15 22 Cutting Tools Application Wood, Fast Cut, Rough Cut Wood, Nail-Embedded Wood, Nail-Embedded Metal Over 1/4" Thick. Metal Over 1/4" Thick Metal Over 1/8" Thick, Gen. Purpose Metal Over 1/8" Thick, Gen. Purpose Thin Metal, Plastic, Polys, Paneling Prod. No 5 Per Vinyl PouchEnglish Only 20725-336B 20727-330B 20715-130B 20728-334B 20716-134B 20730-338B 20717-138B 20718-124B ® Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Lenox® PvC/AbS Plastic Pipe Hand Saw bLADES Features: • One piece carbon steel construction • Tooth hardness Rc 63-66 • 2-1/2" blade width • Precision milled teeth • Spring tempered blade back Advantages: • Good wear resistance • Cuts larger diameter than a hacksaw • Teeth stay sharper longer • Cuts on push and pull stroke • Resists flexing benefits: • Cuts plastic, wood and drywall • Cuts nail-embedded wood • Lasts longer • Saves time • Cuts faster • Cuts straighter Close Quarter ® Saw bi-Metal Hole Saws HANDLE Features: • Heavy-duty aluminum • Single screw blade attachment Advantages: • Sturdy, durable • Virtually unbreakable • Easy to assemble benefits: • Comfortable • Long lasting • Easy blade change Prod. No. Desc. 18" blade & handle 20980-HSF-180 20985-HSF-120 12" blade and handle 18" replacement blade 20981-HSB-18 20982-HSB-12 12" replacement Blade Flush cutting blade adaptor 20987-FCBA* 1 per sleeve/5 per box * 1 Per card/5 per box Features: • Rigid solid bar construction • Hardened carbon blade • Increased blade tensioning Advantages: • Cuts where other frames can’t • Easy blade change benefits: • Increases productivity • Saves time • Straight cuts Prod. No. Desc. 20908-908 Close Quarter® Saw 20906-906 Replacement Blades 6" x 1/4" x .014 x 32T Saw – 1 Per Card/5 Per Box. Blades – 10 Per Card. 22 - 16 Sharper Tooth Tips - A new manufacturing process creates sharper tooth tips for faster, freer cutting. Features: • Bi-metal construction • M-2 high speed steel cutting edge • Tooth hardness Rc 63-65 • Vari-Tooth® design • Positive rake tooth • 3/16" thick heavyduty backing plate • 1-1/2" cutting depth Advantages: • Shock resistant teeth • Resists tooth strippage • Greatly reduces vibration • Aggressive cutting action • More durable than stamped backing cups • Deep cutting benefits: • Teeth stay sharper longer • Faster cutting • • • • Smoother cuts Quieter cuffing Better chip clearance Eliminates need for torque driving plate • Cuts through 2 x 4* * Some arbors limit cutting depth to 1-3/8" / 35mm. Prod. No. Prod. No. Dia. Pipe Tap Pipe Entr. 1 per box 1 per clam (in) (in) (in) 30009-9L – 9/16 30110-K10L 5/8 30010-10L 30011-11L – 11/16 30112-K12L 3/4 1/2 3/8 30012-12L 30098-20MMHS 30198-K20MMHS – 30013-13L – 13/16 30014-14L 30114-K14L 7/8 3/4 1/2 30015-15L – 15/16 30016-16L 30116-K16L 1 30017-17L 30117-K17L 1-1/16 30018-18L 30118-K18L 1-1/8 1 3/4 30019-19L – 1-3/16 30020-20L 30120-K20L 1-1/4 30021-21L – 1-5/16 30022-22L 30122-K22L 1-3/8 1 30023-23L – 1-7/16 30024-24L 30124-K24L 1-1/2 1-1/4 30025-25L – 1-9/16 30026-26L 30126-K26L 1-5/8 30027-27L – 1-11/16 30028-28L 30128-K28L 1-3/4 1-1/2 1-1/4 30029-29L – 1-13/16 30030-30L 30130-K30L 1-7/8 30032-32L 30132-K32L 2 1-1/2 30033-33L – 2-1/16 30034-34L 30134-K34L 2-1/8 30036-36L 30136-K36L 2-1/4 2 30038-38L – 2-3/8 30040-40L 30140-K40L 2-1/2 2 30041-41L – 2-9/16 30042-42L 30142-K42L 2-5/8 2-1/2 30043-43L 30143-K43L – 30044-44L 30144-K44L 2-3/4 30046-46L – 2-7/8 30048-48L 30148-K48L 3 2-1/2 30050-50L 30150-K50L 3-1/8 30052-52L 30152-K52L 3-1/4 3 30054-54L – 3-3/8 30056-56L 30156-K56L 3-1/2 30058-58L 30158-K58L 3-5/8 3 30060-60L – 3-3/4 3-1/2 30064-64L 30164-K64L 4 30066-66L 30166-K66L 4-1/8 3-1/2 30068-68L – 4-1/4 4 30072-72L – 4-1/2 30076-76L 30176-K76L 4-3/4 4-1/2 4 30080-80L – 5 30088-88L – 5-1/2 30096-96L – 6 All Boxed Hole Saws 9/16" to 1-3/4" available in master pack of 10. All Boxed Hole Saws 1-13/16" to 3-1/2" available in master pack of 5. WWW.HANESSUPPLY.COM Use Arbor No. 1L, 4L, 5L 1L, 4L, 5L 1L, 4L, 5L 1L, 4L, 5L 1L, 4L, 5L 1L, 4L, 5L 1L, 4L, 5L 1L, 4L, 5L 1L, 4L, 5L 1L, 4L, 5L 1L, 4L, 5L 1L, 4L, 5L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L 2L or 6L Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Lenox Hole Saws ARBORS Prod. No. 30001-1L 30101-1SL 30002-2L 30102-2SL 30003-3L 30004-4L 30005-5L 30006-6L 1 Per Box Fits Hole Saws 9L–19L 9L–19L 20L–96L 20L–96L 20L–96L 9L–19L 9L–19L 20L–96L Shank Type Hex SDS Hex SDS Solid/Hex Round Hex Hex Chuck Size (in) 1/2 & Larger – 1/2 & Larger – 1/2 & Larger 1/4 & Larger 3/8 & Larger 3/8 & Larger Hole Saw Kits (continued) Super Electrician – No. 30822-1400L 22 Ten sizes needed to bring pipe & conduit through floors, ceilings, partitions and into junction boxes. One each hole saws7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", 3", 3-5/8", 4-1/8", 4-3/4". One each arbors 1L, 2L, 4L. Three spare pilot drills. Plastic case. Cutting Tools ACCESSORIES Desc. Chuck Size (in) Fits Arbor No. Prod. No. 30850-4321 Pilot Drill* 1/4 1L, 1SL, 2L 2SL, 4L 30851-56PD Pilot Drill* 1/4 3L, 5L, 6L 30857-AA1 Arbor Adaptor** 1L, 1SL, 4L, 5L 30848-18X 18" Extension 1/2 & Larger 1L, 2L 12" Extension 1/2 & Larger 1L, 2L 30847-12X 30843-10X 10" Extension 3/8 & Larger 5L, 6L 30846-55X 5-1/2" Extension 1/2 & Larger 1L, 2L 1 Per Clam * Order Pilot Drills in multiples of ten. ** Arbor Adaptors 1 per card. Order in multiples of five. ® Deluxe – No. 30820-1200L Twelve popular sizes. One each hole saws 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4, 2", 2-1/2", 3". One each arbors 1L, 2L. Three spare pilot drills. Plastic case. Maintenance – No. 30807-700k Seven preferred sizes. One each hole saws 7/8", 1", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2-1/8". One each arbors 5L, 6L. One arbor adaptor. One spare pilot drill. Plastic case. refrigeration – No. 30830-600r Six sizes preferred by refrigeration professionals. One each hole saws 5/8", 7/8", 1-1/8", 1-3/8", 1-5/8", 2-1/8". One each arbors 5L, 6L. One spare pilot drill. Plastic case. Hole Saw kits Industrial Maintenance – No. 30823-1900L Sixteen sizes handle just about all installation, maintenance & repair jobs. One each hole saws 3/4", 7/8", 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 3", 3-1/4", 3-5/8", 3-3/4", 4-1/8", 4-3/4". One each arbors 1L, 2L. Three spare pilot drills. Plastic case. Automotive – No. 30805-500A Five sizes used to install air conditioner hoses, door locks, sun roofs, antennas, etc. One each hole saws 3/4", 7/8", 1", 1-1/8", 1-1/4". One arbor 5L. One arbor adaptor. Plastic case. Plumber – No. 30808-600P Six sizes most commonly used for pipe tap and entrance. One each holes saws 3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4". One each arbors 2L, 4L. One spare pilot drill. One arbor adapter. Plastic case. Electrician – No. 30821-600L Six sizes most frequently used for pipe & conduit entrance. One each hole saws 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2". One each arbors 1L, 2L. One spare pilot drill. Plastic case. – continues – WWW.HANESSUPPLY.COM 22 - 17 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Lenox® Carbide Tipped Holes Saws Features: • Carbide tooth tips • Tooth hardness RA 90-93 • Tooth tips welded to backing material • 6° – 7° positive rake • Triple chip ground tooth form • 3 teeth per inch Advantages: • Precision ground angles and clearances • 1-1/2" cutting depth • Greater wear resistance than bi-metal • Elimination of set collapse • Higher heat resistance than bi-metal benefits: • Smoother, concentric cuts • Up to 10 times longer life on abrasive material • Effectively cuts materials standard bi-metal hole saws will not • Faster cutting rates Note: Carbide Tipped Hole Saws use standard arbors. However, we recommend the use of a carbide tipped pilot drill when using a carbide tipped hole saw which fits the 1L, 2L or 4L arbor. Prod. No. 1 Per Box 30212-12CT 30214-14CT 30216-16CT 30218-18CT 30220-20CT 30222-22CT 30224-24CT 30226-26CT 30228-28CT 30232-32CT 30234-34CT 30236-36CT 30238-38CT 30240-40CT 30242-42CT 30243-43CT 30248-48CT 30525-52CT 30254-54CT 30256-56CT 30258-58CT 30260-60CT 30264-64CT 30266-66CT 30268-68CT 30272-72CT 30276-76CT 30280-80CT 30288-88CT 30296-96CT 30297-123CT 22 - 18 Prod. No. Dia. 1 Per clam (in) 31212-K12CT 3/4 31214-K14CT 7/8 31216-K16CT 1 31218-K18CT 1-1/8 31220-K20CT 1-1/4 31222-K22CT 1-3/8 31224-K24CT 1-1/2 31226-K26CT 1-5/8 31228-K28CT 1-3/4 31232-K32CT 2 31234-K34CT 2-1/8 31236-K36CT 2-1/4 – 2-3/8 31240-K40CT 2-1/2 31242-K42CT 2-5/8 31243-K43CT – 31248-K48CT 3 31252-K52CT 3-1/4 – 3-3/8 31256-K56CT 3-1/2 31258-K58CT 3-5/8 – 3-3/4 31264-K64CT 4 31266-K66CT 4-1/8 – 4-1/4 – 4-1/2 31276-K76CT 4-3/4 – 5 – 5-1/2 – 6 Carbide Tipped Pilot Drill Pipe Tap (in) 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 4-1/2 Pipe Entrance (in) 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 Use Arbor No. 1L or 4L 1L or 4L 1L or 4L 1L or 4L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 1 Per Clam Master-Grit® Hole Saws Features: • Tungsten carbide grit edge • Grit hardness RA 90-93 • Gulleted cutting edge design • 3/16" thick heavy-duty backing cap • Strong steel body • 1-5/8" cutting depth Advantages: • Greater heat and wear resistance than bi-metal • Can cut hard, abrasive materials • Longer lasting • Eliminates the need for driving plate benefits: • Cuts materials that bi-metal hole saws will not: Ceramic wall tile, glass, cast iron, fiberglass, plastic laminates, fiber reinforced cement, composites, marble and slate, other abrasive materials • Up to 10 times the life on abrasive materials • Faster cutting • Smoother cutting • Prevents snagging in thinner materials Prod. No. 1 Per Box 29912-12CG 29998-20MMCG 29914-14CG 29916-16CG 29918-18CG 29920-20CG 29922-22CG 29924-24CG 29928-28CG 29932-32CG 29934-34CG 29936-36CG 29938-38CG 29940-40CG 29941-41CG 29942-42CG 29943-43CG 29948-48CG 29952-52CG 29958-58CG 29964-64CG 29966-66CG 1 Per Box Dia. (in) 3/4 – 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2 2-1/8 2-1/4 2-3/8 2-1/2 2-9/16 2-5/8 – 3 3-1/4 3-5/8 4 4-1/8 Pipe Tap (in) 1/2 – 3/4 1 1-1/4 1-1/2 2 2-1/2 3 Pipe Entrance (in) 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 Use Arbor No. 1L or 4L 1L or 4L 1L or 4L 1L or 4L 1L or 4L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L 2L Master-Grit® recessed Lighting Hole Saws Features: • Tungsten carbide grit edge • Grit hardness RA 90-93 • Continuous carbide edge • Strong steel body • 1-5/8" cutting depth Advantages: • Greater heat and wear resistance than bi-metal • Longer lasting • No snagging or binding • Faster cuffing benefits: • Cuts materials that bi-metal will not: Plaster, drywall, plywood, acoustic tile, ceiling tile, stucco with wire mesh support, plaster with lath • Up to 10 times the life than bi-metal • Smooth cutting • Saves time • Improves productivity WWW.HANESSUPPLY.COM Prod. No. 30861-438RL 30862-638RL 30863-658RL 30864-678RL 1 Per Box Dia. (in) 4-3/8 6-3/8 6-5/8 6-7/8 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Lenox Leader ® Lenox Ship Auger Bits (continued) ® Automatic Feed Wood bits 7-1/2" Auger Bits Hole Dia. (in) Prod. No. benefits: • Faster drilling • Less effort required • Longer life • Economical • Cuts tough wet wood • Cuts hardwoods • Cuts through 4A without extension • Reduces time spent on the job • Good for hard-to-get-at places Entrance Entrance for Pipe & Rigid for Tubing Prod. No. Dia. (in) Conduit (in) (in) 33100-LL100 1 1/2 7/8 33112-LL112 1-1/8 1/2 1 33125-LL125 1-1/4 3/4 1-1/8 33137-LL137 1-3/8 1 1-1/4 33150-LL150 1-1/2 1-3/8 33175-LL175 1-3/4 1-1/4 1-1/2 33200-LL200 2 1-1/2 1-7/8 33212-LL212 2-1/8 2 33225-LL225 2-1/4 2-1/8 33256-LL256 2-9/16 2 2-1/2 33300-LL300 3 2-1/2 2-7/8 33362-LL362 3-5/8 3 3-1/2 33462-LL462 4-5/8 4 4-1/2 33900-12LS Leader Lead Screws (fits LL100-LL256) 5/Blister 33901-34LS #34 Leader Lead Screws (fits LL300-LL462) 1/Blister 33989-12SS Leader Set Screws (fits LL100-LL256) 5/Poly Bag 33902-34SS #34 Leader Set Screws (fits LL300-LL462) 5/Poly Bag 32985-HWS Hex Wrench Set 1 ea. 1/8", 5/32" / Pouch 30846-55X Shank Extension* 5-1/2" 1/Clam 30847-12X Shank Extension* 12" 1/Clam 30848-18X Shank Extension* 18" 1/Clam 32510-STF Slim Taper File w/ Handle 1/Box 1 Per Clam * All have 1/2" hex shank with 2 set screws to lock leader in place. Ship Auger bits Features: • Perfectly concentric shape • Wide flat spiral • Precision machined from a special alloyed high carbon steel • Inside hollow twist design • 1/2" hex shank adapts to standard Lenox extensions • Shank indentations for extension bar set screws • Sharp, finely honed cutting edges Advantages: • Cuts through nails • Assures accurate tracking • Takes just seconds to bore through a 12" wide wooden beam • Does not wobble • Clears chips from the sides of the hole benefits: • Low cost per hole • Smoother cutting and easy chip flow • Diminishes clogging and binding • Does not slip in drill chuck – continues – 31030-07A-1016 31031-07A-1116 31032-07A-1216 31033-07A-1316 31034-07A-1416 31035-07A-1516 31036-07A-1616 31037-07A-1716 31038-07A-1816 31040-07A-2016 31042-07A-2216 31044-07A-2416 31055-V-7-AB 1 Per Tube 18" Auger Bits Prod. No. Hole Dia. (in) 31009-008-0916 9/16 5/8 31010-008-1016 5/8 11/16 31011-008-1116 11/16 3/4 31012-008-1216 3/4 13/16 31013-008-1316 13/16 7/8 31014-008-1416 7/8 15/16 31015-008-1516 15/16 1 31016-008-1616 1 1-1/16 31017-008-1716 1-1/16 1-1/8 31018-008-1816 1-1/8 1-1/4 31020-008-2016 1-1/4 1-3/8 31022-008-2216 1-3/8 1-1/2 31024-008-2416 1-1/2 Ship Auger File 1 Per Blister / 5 Per Box 22 Cutting Tools Features: • Outside diameter threads • Replaceable lead screws • Forged body • Precision ground • 4-1/2" shank length • 5-1/2" overall length • Fits 1/2" drill chuck & larger • Shank indentations for extension bar set screws Advantages: • Self-feeding • Easy to change • Stronger construction • Sharpenable with file • Produces very clean hole • Deeper cutting • Eliminates need for additional extension • Bit will not disengage from extension during use ® Portable band Saw blades Master band® Features: • Bi-metal construction • Matrix II type alloy high speed steel cuffing edge (8% cobalt edge) • Tooth hardness Rc 66-68 • Vari-Tooth or standard tooth forms available Advantages: • Tough shock resistant alloy with less tooth chippage • Withstands higher cutting temperatures than M-2 or carbon steel blades benefits: • Lasts longer on interrupted cuts and mild to difficult to machine materials • Attains higher productivity than M-2 or carbon steel blades Length x Width x Thickness (in) 3' 8-7/8" (44-7/8") x 1/2" x .020 Prod. No. Teeth Per Inch 80114-38-EW-10/14 10/14 80115-38-EW-14 14 80112-38-EW-14/18 14/18 80116-38-EW-18 18 80117-38-EW-24 24 3' 8-7/8" (44-7/8") x 1/2" x .025 80143-385-EW-8/12 8/12 80144-385-EW-10/14 10/14 80145-385-EW-14 14 80142-385-EW-14/18 14/18 82310-385-EW-18 18 4' 5-3/4" (53-3/4") x 1/2" x .020 80119-45-EW-10/14 10/14 80120-45-EW-14 14 80123-45-EW-14/18 14/18 80121-45-EW-18 18 80122-45-EW-24 24 4' 5-3/4" (53-3/4") x 1/2" x .025 80146-455-EW-10/14 10/14 80147-455-EW-14/18 14/18 4' 6" (54") x 1/2" x .025 80148-54-EW-6/10 6/10 80723-54-EW-8/12 8/12 80724-54-EW-10/14 10/14 80141-54-EW-14/18 14/18 80150-54-EW-18 18 Tungsten Grit Edge Portable Band Saw Blades available upon request. Portable Power Hacks Features: • Bi-metal construction • M-2 high speed steel cutting edge • Tooth hardness Rc 64-66 • Std. tooth form Advantages: • Virtually shatterproof • High wear resistance benefits: • Straighter cuts • Longer blade life • Safer than solid high speed steel blades Prod. No. L x W x T (in) Teeth Per Inch 22705-814PPH 8 x 1-1/4 x .062 14 22715-1214PPH 12 x 1-1/4 x .062 14 22725-1614PPH 16 x 1-1/4 x .062 14 22735-2114PPH 21 x 1-1/4 x .062 14 22738-2414PPH 23-5/8 x 1-1/4 x .062 14 22748-3014PPH 30-5/16 x 1-1/4 x .062 14 For use on all popular pneumatic and electrical portable hacksaw machines. (Widder, Fen & Kreig). Used by refineries, chemical companies & utility companies. WWW.HANESSUPPLY.COM 22 - 19 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 DrILL SETS Michigan Drill Michigan Drill Jobber Length Pieces Case Per Set No. Description High Speed Steel - General Purpose Fractional 1/16 – 1/2 by 64ths Fractional 1/16 – 1/4 by 64ths Fractional 1/16 – 3/8 by 64ths 1/16 – 1/2 by 32nds Fractional Letter A–Z Wire Gauge 1 – 60 Wire Gauge 61 – 80 1.0mm – 6.0mm by .5mm Metric Metric 1.0mm – 10.00mm by .5mm 1.0mm – 13.0mm by .5mm Metric Titanium Coated - High Speed Steel Fractional 1/16 – 1/2 by 64ths 1/16 – 1/4 by 64ths Fractional Fractional 1/16 – 1/2 by 32nds A–Z Letter Wire Gauge 1 – 60 Cobalt - 135° Split Point 1/16 – 1/2 by 64ths Fractional Fractional 1/16 – 1/2 by 32nds 1/16 – 3/8 by 64ths Fractional Fractional 1/16 – 1/4 by 64ths Letter A–Z *Wire Gauge 1 – 60 *Wire Gauge 61 – 80 Combination Sets General 1/16 – 1/2 by 64ths, Purpose A – Z, 1 – 60 General 1/16 – 1/2 by 64ths, Purpose A – Z, 1 – 80 General 1/16 – 1/2 by 64ths, 1 – 80, Purpose 1mm – 13mm by .5mm Titanium 1/16 – 1/2 by 64ths, Coated A – Z, 1 – 60 Cobalt 135° Sp. Pt. 1/16 – 1/2 by 64ths, A – Z, 1 – 60 Taper Shank Set No. 29 13 21 15 26 60 20 11 19 25 CZ29 CZ13 CZ21 CZ15 CZ26 CZ60 CZ20 CZM11 CZM19 CZM25 307F 307G 307S 307R 307L 307W 307V 307A 307B 307D 29 13 15 26 60 CZ29 CZ13 CZ15 CZ26 CZ60 307TF 307TG 307TR 307TL 307TW 29 15 21 13 26 60 20 CZ29 CZ15 CZ21 CZ13 CZ26 CZ60 CZ20 307CF 307CR 307CS 307CG 307CL 307CW 307CV 115 CZ115 307X 134 CZ134 307Z 135 115 115 CZ135 CZ115 CZ115 Description High Speed Steel Fractional 33/64 – 3/4 by 64ths 49/64 – 1" by 64ths Fractional Gen. Purpose - Cobalt Gen. Purpose - 60 pcs. Cobalt 29 pcs. 307Y 307TX Cobalt Combo 307CX * = Sizes under 1/16" – NOT split. Screw Machine Length Description High Speed Steel - 135° Split Point Fractional 1/16 – 1/2 by 64ths Fractional 1/16 – 1/4 by 64ths Fractional 1/16 – 1" by 64ths Letter A–Z *Wire Gauge 1 – 60 *Combination 1/16 – 1/2 by 64ths, A – Z, 1 – 60 Cobalt - 135° Split Point Fractional 1/16 – 1/2 by 64ths Letter A–Z *Wire Gauge 1 – 60 * = Sizes under 1/16" and 53 - 60 – NOT split. Taper Length Description High Speed Steel Fractional 1/16 – 1/2 by 64ths Fractional 33/64 – 3/4 by 64ths Fractional 49/64 – 1" by 64ths Letter A–Z Wire Gauge 1 – 60 Cobalt - 135° Split Point Fractional 1/16 – 1/2 by 64ths 22 - 20 Pieces Case Per Set No. 29 13 33 26 60 115 29 26 60 CZ29S CZ13S CZ833 CZ26S CZ60S CZ115S Set No. 607F 607G 607H 607L 607W 607X CZ29S 607CF CZ26S 607CL CZ60S 607CW Pieces Case Per Set No. Screw Machine Length High Speed Steel - 26 pcs. Set No. 29 16 16 26 60 CZT29 CZA16 CZB16 CZT26 CZT60 407A 407B 407C 407L 407W 29 CZT29 407CF Taper Length High Speed Steel - 29 pcs. Pieces Case Per Set No. 16 16 CZA16 CZB16 200A 200B Pieces Case Per Set No. Set No. Aircraft Extension Drills Description High Speed Steel Fractional – 6" OAL Fractional – 12" OAL Letter – 12" OAL Wire Gauge – 6" OAL Wire Gauge – 12" OAL 1/16 – 3/8 by 64ths 1/16 – 1/2 by 64ths A–Z 1 – 60 1 – 60 Set No. 21 29 26 60 60 CZ829 906SF CZ829 912SF CZ826 912SL CZ860 906SW CZ860 912SW Taper Shank High Speed Steel - Large Set Extra Length Drills - Straight Shank Description High Speed Steel 1/8 – 3/8 by 64ths 8" Overall 10" Overall 3/16 – 1/2 by 64ths 1/8 – 1/2 by 64ths 12" Overall 18" Overall 3/16 – 1/2 by 32nds Pieces Case Per Set No. 17 21 25 11 reduced Shank Drills Pieces Description Per Set High Speed Steel 1/4" Shank 1/16 – 1/2 by 64ths 29 with 1/4" Shanks 1/4" Shank 1/4 – 1/2 by 16ths Drill, 10 1/4 – 1/2 by 1/16ths CT Masonry 3/8" Shank 1/16 – 1/2 by 64ths 29 with 3/8 Shanks 3/8" Shank 3/8 – 17/32 by 32nds, 9/16, 8 5/8, 17/32 with 3/8 Shank 1/2" Shank 9/16 – 1" by 16ths 8 1/2" Shank 1-1/16 – 1-1/2 by 16ths 8 1/2" Shank 9/16 – 1" by 16ths, 1-1/8 10 and 1-1/4 1/2" Shank 17/32 – 3/4 by 32nds, 13 13/16 – 1" by 16ths, 31/32 1/2" Shank 33/64 – 1" by 64ths 32 3/4" Shank 1" – 1-1/2 by 8ths 5 3/4" Shank 1" – 2" by 4ths 5 Cobalt 1/2" Shank 9/16 – 1" by 16ths 1/2" Shank 9/16 – 1" by 16ths, 1-1/8 and 1-1/4 1/2" Shank 1-1/16 – 1-1/2 by 16ths 1/2" Shank 17/32 – 3/4 by 32nds, 13/16 – 1" by 16ths, 31/32 1/2" Shank 33/64 – 1" by 64ths 3/4" Shank 1" – 1-1/2 by 8ths 3/4" Shank 1" – 2" by 4ths Countersink Description Center Reamers – Three Flute 60° 1/4, 3/8, 1/2, 5/8, 3/4 82° 1/4, 3/8, 1/2, 5/8, 3/4 90° 1/4, 3/8, 1/2, 5/8, 3/4 100° 1/4, 3/8, 1/2, 5/8, 3/4 Chatterless – Six Flute 60° 1/4, 3/8, 1/2, 5/8, 3/4 82° 1/4, 3/8, 1/2, 5/8, 3/4 90° 1/4, 3/8, 1/2, 5/8, 3/4 Machine Countersinks – Single Flutes 60° 1/4, 3/8, 1/2, 5/8, 3/4 82° 1/4, 3/8, 1/2, 5/8, 3/4 90° 1/4, 3/8, 1/2, 5/8, 3/4 100° 1/4, 3/8, 1/2, 5/8, 3/4 WWW.HANESSUPPLY.COM Set No. CZ829 CZ829 CZ829 CZ829 208ES 210ES 212ES 218ES Case No. Set No. CZ29 304A CZ29 308A Block Block CZ303 Block Block 304B 308D 303SD 8 10 CZ303 Block 303CA 303CS 32 5 5 Block Block Block 8 13 Block Block Pieces Case Per Set No. 1/4" Shank - 29 pcs. 303SA 303SB 303SC Block Block Block Block 12" OAL 303SE 306A 306B 303CB 303CD 303CE 306D 306E 1/2" Shank - 13 pcs. 3/8" Shank - 8 pcs. Set No. 5 5 5 5 Block Block Block Block 480S 481S 482S 483S 5 5 5 Block Block Block 495S 496S 497S 5 5 5 5 Block Block Block Block 490S 491S 492S 493S Six Flute Single Flute Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Michigan Drill SETS 1/2" Shank - Silver and Deming Indexes reamers - High Speed Steel Pieces Case Per Set No. Chucking Reamer - Straight Shank Fractional 1/16 – 1/2 by 64ths Letter A–Z Wire Gauge 1 – 60 Over and Under .1240 – .5010 Dowel Pin .1230 – .4995 Straight Shank Aligning Reamer Fractional 1/2, 9/16, 5/8, 3/4 8 4 Block Block 570A 570B 29 26 60 14 14 CZ129 CZ126 Pouch CZ112 CZ114 550SF 550SL 550SW 550SX 550SD 4 Block 535RS Taps – High Speed Steel Pieces Case Description Per Set No. Hand Taps Taper, Plug and Bott. NC 4–40 thru 33 Block 1/2–13 and 10–32 .005 Oversize Taps Hand/Plug NC 6–32 thru 1/2–13 and 10–32 Spiral Pointed NC 6–32 thru 1/2–13 and 10–32 Combination Combination of Set 775S & 785S 775S 16 Block 785A 8 Description Straight Flute Helical Flute #1 – 5 #1 – 5 CASES/INDExES Block Pieces Case Set Per Set No. No. 5 Pouch SES15 5 Pouch SE15 Description Fractional Letter Wire Gauge Over & Under Dowel Pin Metric 1/16 – 1/2 by 64ths A–Z 1 - 60 .1240 – .5010 .1230 – .4995 1.0mm – 13.0mm by .5mm Taper Length Indexes Description Fractional Letter Wire Gauge Pieces Per Set 29 26 60 14 14 25 Case No. CZ129 CZ126 CZ160 CZ112 CZ114 CZ125 Pieces Per Set Case No. 29 26 60 CZT29 CZT26 CZT60 Pieces Per Set Case No. 16 16 CZA16 CZB16 1/16 – 1/2 by 64ths A–Z 1 – 60 Taper Length/Taper Shank Indexes Metric Tap & Drill Set 785S Pouch 770R CZTD18 770X Pouch 773S Description Fractional Fractional 33/64 – 3/4 by 64ths 49/64 – 1" by 64ths Combination Indexes Std. Tap & Drill Set Screw Extractor Set Pieces Description Per Set Jobber Length Fractional 1/16 – 1/2 by 64ths, A – Z, 1 – 60 115 Fractional 1/16 – 1/2 by 64ths, A – Z, 1 – 80 135 Fractional 1/16 – 1/2 by 64ths, 1 – 80, 134 1mm – 13mm by .5mm Metric 1.0mm – 13.0mm 118 Screw Machine Fractional 1/16 – 1/2 by 64ths, A – Z, 1 – 60 115 Tap and Drill Indexes Description Pieces Per Set Frac. & Mach. Scr. NC 6-32, #36 to 1/2-13, 27/64 Frac. & Mach. Scr. NF 6-40, #33 to 1/2-20, 29/64 Metric 2.5mm x .45 Tap, 2.05 Drill to 12.0mm x 1.75 tap 10.20mm Drill Combination, Frac. & Mach. Screw NC & NF CZTD18 & CZTD99 Taps Only NC and NF 1/4 to 1/2 Jobber Length Indexes Description Fractional Fractional Fractional Fractional Letter Wire Gauge Wire Gauge Metric Metric Metric Pieces Per Set 1/16 – 1/2 by 64ths 29 1/16 – 1/4 by 64ths 13 1/16 – 3/8 by 64ths 21 1/16 – 1/2 by 32nds 15 A–Z 26 1 – 60 60 61 – 80 20 1.0mm – 6.0mm by .5mm 11 1.0mm – 10.0mm by .5mm 19 1.0mm – 13.0mm by .5mm 25 Case No. CZ29 CZ13 CZ21 CZ15 CZ26 CZ60 CZ20 CZM11 CZM19 CZM25 Description Fractional Fractional Letter Wire Gauge Pieces Per Set 29 13 26 60 Case No. CZ29S CZ13S CZ26S CZ60S Screw Machine Length Indexes 1/16 – 1/2 by 64ths 1/16 – 1/4 by 64ths A–Z 1 – 60 Chucking reamer Straight Shank - 29 pcs. 770S Block 9/16 – 1" by 16ths reamer Indexes Set No. 8 Tap and Drill Frac. & Mach. Screw 6–32 to 1/2–13 16 Frac. & Mach. Screw 6–32 to 1/2–13 18 Metric Taps 3mm x .5mm to 16 12 x 1.75mm, Drills 2.5 to 10.25 Screw Extractors Set No. Pieces Case Per Set No. 8 CZ303 STANDS Case No. CZ115 CZ135 CZ134 CZM118 CZ115S Case No. 18 18 18 CZTD18 CZTD99 CZTD99M 36 10 CZTD36 CZTD10 Drill Stands Pieces Description Per Set No. Standard Shanks Fractional 1/16 – 1/2 by 64ths 29 CZ829 Fractional 1/2 – 1" by 64ths 33 CZ833 Letter A–Z 26 CZ826 Wire Gauge 1 – 60 60 CZ860 1/2" Shank - Silver and Deming Frac. 1/16 – 1/2 by 64ths for 1/2" Shanks 33 CZ833S Drill Gauges Description Fractional 1/16 – 1/2 by 64ths Wire Gauge 1 – 60 WWW.HANESSUPPLY.COM Pieces Case Per Set No. 29 CZG29 60 CZG60 22 Cutting Tools Description Adjustable Hand Reamer 15/32 – 1-1/16 Range A – H 1/4 – 3/8 8A – 5A Description 1/2" Shank – S&D Fractional Drill Stand Fractional Wire 22 - 21 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Michigan Drill DrILLS Jobber Length Drills General Purpose, 118° Point Jobber Length Drills – WIRE GAUGE SIZE (continued) HIGH SPEED STEEL Size (in) • List No. 300 – Oxide Finish • List No. 300A – Bright Finish • List No. 300T – Titanium Nitride Coated • Set No. 307F: 29 Piece High Speed Fractional Set 1/16 – 1/2 x 64ths in Metal Case • Set No. 307W:60 Piece High Speed Jobber Drill Set No. 1– 60 with metal case FrACTIONAL SIzES Size (in) 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 Dec. Equiv. .0156 .0312 .0469 .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2656 .2812 .2969 .3125 .3281 .3438 .3594 Flute Overall Length Length (in) (in) 3/16 3/4 1/2 1-3/8 3/4 1-3/4 7/8 1-7/8 1 2 1-1/4 2-1/4 1-1/2 2-5/8 1-5/8 2-3/4 1-3/4 2-7/8 2 3-1/8 2-1/8 3-1/4 2-5/16 3-1/2 2-7/16 3-5/8 2-1/2 3-3/4 2-5/8 3-7/8 2-3/4 4 2-7/8 4-1/8 2-15/16 4-1/4 3-1/16 4-3/8 3-3/16 4-1/2 3-5/16 4-5/8 3-7/16 4-3/4 3-1/2 4-7/8 LETTEr SIzES Size (in) A B C D E F G H I J K L M N O Dec. Equiv. .2340 .2380 .2420 .2460 .2500 .2570 .2610 .2660 .2720 .2770 .2810 .2900 .2950 .3020 .3160 Flute Overall Length Length (in) (in) 2-5/8 3-7/8 2-3/4 4 2-3/4 4 2-3/4 4 2-3/4 4 2-7/8 4-1/8 2-7/8 4-1/8 2-7/8 4-1/8 2-7/8 4-1/8 2-7/8 4-1/8 2-15/16 4-1/4 2-15/16 4-1/4 3-1/16 4-3/8 3-1/16 4-3/8 3-3/16 4-1/2 Size (in) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Dec. Equiv. .2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 .1850 .1820 .1800 Flute Overall Length Length (in) (in) 2-5/8 3-7/8 2-5/8 3-7/8 2-1/2 3-3/4 2-1/2 3-3/4 2-1/2 3-3/4 2-1/2 3-3/4 2-7/16 3-5/8 2-7/16 3-5/8 2-7/16 3-5/8 2-7/16 3-5/8 2-5/16 3-1/2 2-5/16 3-1/2 2-5/16 3-1/2 2-3/16 3-3/8 2-3/16 3-3/8 WIrE GAUGE SIzE – continues – 22 - 22 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 6 6 6 6 6 6 Pkg. Qty. 12 12 12 12 12 12 12 12 6 6 6 6 6 6 6 Size (in) 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 3/4 Dec. Equiv. .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 .5156 .5312 .5469 .5625 .5781 .5938 .6094 .6250 .6406 .6562 .6719 .6875 .7500 307F Flute Overall Length Length (in) (in) 3-5/8 3-3/4 3-7/8 3-15/16 4-1/16 4-3/16 4-5/16 4-3/8 4-1/2 4-13/16 4-13/16 4-13/16 4-13/16 4-13/16 5-3/16 5-3/16 5-3/16 5-3/16 5-3/16 5-5/8 5-5/8 5-5/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6 6-5/8 6-5/8 6-5/8 6-5/8 6-5/8 7-1/8 7-1/8 7-1/8 7-1/8 7-1/8 7-5/8 7-5/8 7-5/8 Size (in) Dec. Equiv. Flute Overall Length Length (in) (in) Size (in) Dec. Equiv. Flute Overall Length Length (in) (in) Pkg. Qty. 6 6 6 6 6 6 6 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 Pkg. Qty. P .3230 3-5/16 4-5/8 6 Q .3320 3-7/16 4-3/4 6 R .3390 3-7/16 4-3/4 6 S .3480 3-1/2 4-7/8 6 T .3580 3-1/2 4-7/8 6 U .3680 3-5/8 5 6 V .3770 3-5/8 5 6 W .3860 3-3/4 5-1/8 6 X .3970 3-3/4 5-1/8 6 Y .4040 3-7/8 5-1/4 6 Z .4130 3-7/8 5-1/4 6 ORDERING NOTE: To complete your order we may substitute and interchange List No. 300 for 300A unless you specify “NO SUBSTITUTIONS.” 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 .1770 .1730 .1695 .1660 .1610 .1590 .1570 .1540 .1520 .1495 .1470 .1440 .1405 .1360 .1285 2-3/16 2-3/16 2-1/8 2-1/8 2-1/8 2-1/8 2 2 2 1-7/8 1-7/8 1-7/8 1-3/4 1-3/4 1-5/8 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 Dec. Equiv. .1200 .1160 .1130 .1110 .1100 .1065 .1040 .1015 .0995 .0980 .0960 .0935 .0890 .0860 .0820 .0810 .0785 .0760 .0730 .0700 .0670 .0635 .0595 .0550 .0520 .0465 .0430 Flute Overall Length Length (in) (in) 1-5/8 1-5/8 1-1/2 1-1/2 1-1/2 1-7/16 1-7/16 1-7/16 1-3/8 1-3/8 1-3/8 1-1/4 1-1/4 1-1/8 1-1/8 1-1/8 1 1 1 1 1 7/8 7/8 7/8 7/8 3/4 3/4 2-3/4 2-3/4 2-5/8 2-5/8 2-5/8 2-1/2 2-1/2 2-1/2 2-3/8 2-3/8 2-3/8 2-1/4 2-1/4 2-1/8 2-1/8 2-1/8 2 2 2 2 2 1-7/8 1-7/8 1-7/8 1-7/8 1-3/4 1-3/4 Size (in) Dec. Equiv. Flute Overall Length Length (in) (in) 58 .0420 11/16 1-5/8 59 .0410 11/16 1-5/8 60 .0400 11/16 1-5/8 .0390 11/16 1-5/8 61 62 .0380 5/8 1-1/2 .0370 5/8 1-1/2 63 64 .0360 5/8 1-1/2 65 .0350 5/8 1-1/2 66 .0330 1/2 1-3/8 67 .0320 1/2 1-3/8 .0310 1/2 1-3/8 68 69 .0292 1/2 1-3/8 70 .0280 3/8 1-1/4 71 .0260 3/8 1-1/4 72 .0250 5/16 1-1/8 .0240 5/16 1-1/8 73 74 .0225 1/4 1 .0210 1/4 1 75 76 .0200 3/16 7/8 77 .0180 3/16 7/8 78 .0160 3/16 7/8 79 .0145 1/8 3/4 .0135 1/8 3/4 80 ORDERING NOTE: To complete your order we may substitute and interchange List No. 300 for 300A unless you specify “NO SUBSTITUTES.” Micro Drills • List No. 300A (12 Drills per pkg.) Available in bright finish only. Pin Chuck Set • Set No. Pv30: One Pin Chuck with 3 collets 1/32, 1/16, 3/32 Micro Chuck • List No. Pv10: Suitable for 61-80 drills can be held in any 1/8 or 3/16 collet or larger adjustable drill chuck. Size (in) 81 82 83 84 85 86 87 88 89 Dec. Equiv. .0130 .0125 .0120 .0115 .0110 .0105 .0100 .0095 .0091 Flute Overall Length Length (in) (in) 3/32 3/4 3/32 3/4 3/32 3/4 3/32 3/4 5/64 3/4 5/64 3/4 5/64 3/4 5/64 3/4 1/16 3/4 3-3/8 3-3/8 3-1/4 3-1/4 3-1/4 3-1/4 3-1/8 3-1/8 3-1/8 3 3 3 2-7/8 2-7/8 2-3/4 WWW.HANESSUPPLY.COM Size (in) 90 91 92 93 94 95 96 97 Dec. Equiv. .0087 .0083 .0079 .0075 .0071 .0067 .0063 .0059 Flute Overall Length Length (in) (in) 1/16 3/4 1/16 3/4 1/16 3/4 1/16 3/4 1/16 3/4 1/16 3/4 3/64 3/4 3/64 3/4 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Michigan Drill Cobalt Jobber Length Drills Cobalt Jobber Length Drills – WIRE GAUGE SIZES (continued) Heavy Duty – 135° Split Point Cobalt drills display higher red hardness and are especially effective in drilling hard or abrasive materials. • List No. 300C* – Super Cobalt FArCTIONAL SIzES Size (in) 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 Flute Overall Dec. Length Length Equiv. (in) (in) .0156 3/16 3/4 .0312 1/2 1-3/8 .0469 3/4 1-3/4 .0625 7/8 1-7/8 .0781 1 2 .0938 1-1/4 2-1/4 .1094 1-1/2 2-5/8 .1250 1-5/8 2-3/4 .1406 1-3/4 2-7/8 .1562 2 3-1/8 .1719 2-1/8 3-1/4 .1875 2-5/16 3-1/2 .2031 2-7/16 3-5/8 .2188 2-1/2 3-3/4 .2344 2-5/8 3-7/8 .2500 2-3/4 4 .2656 2-7/8 4-1/8 .2812 2-15/16 4-1/4 .2969 3-1/16 4-3/8 .3125 3-3/16 4-1/2 .3281 3-5/16 4-5/8 .3438 3-7/16 4-3/4 LETTEr SIzES Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 6 6 6 6 6 Size (in) 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 Dec. Equiv. .3594 .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 .5156 .5312 .5469 .5625 .5781 .5938 .6094 .6250 .6406 .6562 .6719 .6875 Size (in) A B C D E F G H I J K L M Flute Overall Dec. Length Length Equiv. (in) (in) .2340 2-5/8 3-7/8 .2380 2-3/4 4 .2420 2-3/4 4 .2460 2-3/4 4 .2500 2-3/4 4 .2570 2-7/8 4-1/8 .2610 2-7/8 4-1/8 .2660 2-7/8 4-1/8 .2720 2-7/8 4-1/8 .2770 2-7/8 4-1/8 .2810 2-15/16 4-1/4 .2900 2-15/16 4-1/4 .2950 3-1/16 4-3/8 Pkg. Qty. 12 12 12 12 12 12 12 12 6 6 6 6 6 Size (in) Dec. Equiv. Size (in) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Dec. Equiv. .2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 .1850 .1820 .1800 .1770 .1730 .1695 .1660 .1610 .1590 Flute Overall Length Length (in) (in) 2-5/8 3-7/8 2-5/8 3-7/8 2-1/2 3-3/4 2-1/2 3-3/4 2-1/2 3-3/4 2-1/2 3-3/4 2-7/16 3-5/8 2-7/16 3-5/8 2-7/16 3-5/8 2-7/16 3-5/8 2-5/16 3-1/2 2-5/16 3-1/2 2-5/16 3-1/2 2-3/16 3-3/8 2-3/16 3-3/8 2-3/16 3-3/8 2-3/16 3-3/8 2-1/8 3-1/4 2-1/8 3-1/4 2-1/8 3-1/4 2-1/8 3-1/4 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Size (in) 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 WIrE GAUGE SIzES – continues – N O P Q R S T U V W X Y Z Flute Overall Length Length (in) (in) 3-1/2 3-5/8 3-3/4 3-7/8 3-15/16 4-1/16 4-3/16 4-5/16 4-3/8 4-1/2 4-13/16 4-13/16 4-13/16 4-13/16 4-13/16 5-3/16 5-3/16 5-3/16 5-3/16 5-3/16 5-5/8 5-5/8 4-7/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6 6-5/8 6-5/8 6-5/8 6-5/8 6-5/8 7-1/8 7-1/8 7-1/8 7-1/8 7-1/8 7-5/8 7-5/8 Pkg. Qty. 6 6 6 6 6 6 6 6 6 6 1 1 1 1 1 1 1 1 1 1 1 1 .3020 .3160 .3230 .3320 .3390 .3480 .3580 .3680 .3770 .3860 .3970 .4040 .4130 Flute Overall Length Length (in) (in) 3-1/16 3-3/16 3-5/16 3-7/16 3-7/16 3-1/2 3-1/2 3-5/8 3-5/8 3-3/4 3-3/4 3-7/8 3-7/8 Pkg. Qty. Dec. Equiv. .1570 .1540 .1520 .1495 .1470 .1440 .1405 .1360 .1285 .1200 .1160 .1130 .1110 .1100 .1065 .1040 .1015 .0995 .0980 .0960 .0935 Flute Overall Length Length (in) (in) 2 3-1/8 2 3-1/8 2 3-1/8 1-7/8 3 1-7/8 3 1-7/8 3 1-3/4 2-7/8 1-3/4 2-7/8 1-5/8 2-3/4 1-5/8 2-3/4 1-5/8 2-3/4 1-1/2 2-5/8 1-1/2 2-5/8 1-1/2 2-5/8 1-7/16 2-1/2 1-7/16 2-1/2 1-7/16 2-1/2 1-3/8 2-3/8 1-3/8 2-3/8 1-3/8 2-3/8 1-1/4 2-1/4 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 4-3/8 4-1/2 4-5/8 4-3/4 4-3/4 4-7/8 4-7/8 5 5 5-1/8 5-1/8 5-1/4 5-1/4 6 6 6 6 6 6 6 6 6 6 6 6 6 Dec. Equiv. .0890 .0860 .0820 .0810 .0785 .0760 .0730 .0700 .0670 .0635 .0595 .0550 .0520 .0465 .0430 .0420 .0410 .0400 .0390 .0380 Flute Overall Length Length (in) (in) 1-1/4 2-1/4 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 1 2 1 2 1 2 1 2 1 2 7/8 1-7/8 7/8 1-7/8 7/8 1-7/8 7/8 1-7/8 3/4 1-3/4 3/4 1-3/4 11/16 1-5/8 11/16 1-5/8 11/16 1-5/8 11/16 1-5/8 5/8 1-1/2 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Jobber Length Drills Slow Spiral Flute Overall Dec. Length Length Pkg. Size (in) Equiv. (in) (in) Qty. 63 .0370 5/8 1-1/2 12 64 .0360 5/8 1-1/2 12 65 .0350 5/8 1-1/2 12 66 .0330 1/2 1-3/8 12 .0320 1/2 1-3/8 12 67 68 .0310 1/2 1-3/8 12 .0292 1/2 1-3/8 12 69 70 .0280 3/8 1-1/4 12 71 .0260 3/8 1-1/4 12 .0250 5/16 1-1/8 12 72 73 .0240 5/16 1-1/8 12 .0225 1/4 1 12 74 75 .0210 1/4 1 12 76 .0200 3/16 7/8 12 77 .0180 3/16 7/8 12 78 .0160 3/16 7/8 12 .0145 1/8 3/4 12 79 80 .0135 1/8 3/4 12 *Cobalt sizes smaller than 1/16 furnished with 135° point - NOT Split. HIGH SPEED STEEL • List No. 300L – Bright Finish, 118° Point - Slow spiral drills are designed for applications in brass. The open flute design allows the greatest volume of chip removal with high feed rates. They are also successfully used in shallow hole drilling of aluminum and magnesium alloys and die cast parts. Set No. 307SL: 29 Piece Fractional Jobber Set 1/16 - 1/2 x 64ths in Metal Case FrACTIONAL SIzES Size (in) 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 Dec. Equiv. .0156 .0312 .0469 .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 Flute Overall Length Length (in) (in) 3/16 3/4 1/2 1-3/8 3/4 1-3/4 7/8 1-7/8 1 2 1-1/4 2-1/4 1-1/2 2-5/8 1-5/8 2-3/4 1-3/4 2-7/8 2 3-1/8 2-1/8 3-1/4 2-5/16 3-1/2 2-7/16 3-5/8 2-1/2 3-3/4 2-5/8 3-7/8 2-3/4 4 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Size (in) 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 Flute Overall Dec. Length Length Equiv. (in) (in) .2656 2-7/8 4-1/8 .2812 2-15/16 4-1/4 .2969 3-1/16 4-3/8 .3125 3-3/16 4-1/2 .3281 3-5/16 4-5/8 .3438 3-7/16 4-3/4 .3594 3-1/2 4-7/8 .3750 3-5/8 5 .3906 3-3/4 5-1/8 .4062 3-7/8 5-1/4 .4219 3-15/16 5-3/8 .4375 4-1/16 5-1/2 .4531 4-3/16 5-5/8 .4688 4-5/16 5-3/4 .4844 4-3/8 5-7/8 .5000 4-1/2 6 Pkg. Qty. 12 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Size (in) A B C D E F G H I J K L M Flute Overall Dec. Length Length Equiv. (in) (in) .2340 2-5/8 3-7/8 .2380 2-3/4 4 .2420 2-3/4 4 .2460 2-3/4 4 .2500 2-3/4 4 .2570 2-7/8 4-1/8 .2610 2-7/8 4-1/8 .2660 2-7/8 4-1/8 .2720 2-7/8 4-1/8 .2770 2-7/8 4-1/8 .2810 2-15/16 4-1/4 .2900 2-15/16 4-1/4 .2950 3-1/16 4-3/8 Pkg. Qty. 12 12 12 12 12 12 12 12 6 6 6 6 6 Size (in) Dec. Equiv. Flute Overall Length Length (in) (in) Pkg. Qty. LETTEr SIzES – Jobber Length Drills Continue – WWW.HANESSUPPLY.COM N O P Q R S T U V W X Y Z .3020 .3160 .3230 .3320 .3390 .3480 .3580 .3680 .3770 .3860 .3970 .4040 .4130 3-1/16 3-3/16 3-5/16 3-7/16 3-7/16 3-1/2 3-1/2 3-5/8 3-5/8 3-3/4 3-3/4 3-7/8 3-7/8 4-3/8 4-1/2 4-5/8 4-3/4 4-3/4 4-7/8 4-7/8 5 5 5-1/8 5-1/8 5-1/4 5-1/4 6 6 6 6 6 6 6 6 6 6 6 6 6 22 - 23 22 Cutting Tools Set No. 307CF: 29 Piece Fractional Jobber Set 1/16 - 1/2 x 64ths in Metal Case Size (in) 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Michigan Drill Jobber Length Drills (continued) WIrE GAUGE SIzES Size (in) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Dec. Equiv. .2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 .1850 .1820 .1800 .1770 .1730 .1695 .1660 .1610 .1590 .1570 .1540 .1520 .1495 .1470 .1440 .1405 .1360 .1285 .1200 .1160 .1130 .1110 .1100 .1065 .1040 .1015 .0995 .0980 Flute Overall Length Length (in) (in) 2-5/8 3-7/8 2-5/8 3-7/8 2-1/2 3-3/4 2-1/2 3-3/4 2-1/2 3-3/4 2-1/2 3-3/4 2-7/16 3-5/8 2-7/16 3-5/8 2-7/16 3-5/8 2-7/16 3-5/8 2-5/16 3-1/2 2-5/16 3-1/2 2-5/16 3-1/2 2-3/16 3-3/8 2-3/16 3-3/8 2-3/16 3-3/8 2-3/16 3-3/8 2-1/8 3-1/4 2-1/8 3-1/4 2-1/8 3-1/4 2-1/8 3-1/4 2 3-1/8 2 3-1/8 2 3-1/8 1-7/8 3 1-7/8 3 1-7/8 3 1-3/4 2-7/8 1-3/4 2-7/8 1-5/8 2-3/4 1-5/8 2-3/4 1-5/8 2-3/4 1-1/2 2-5/8 1-1/2 2-5/8 1-1/2 2-5/8 1-7/16 2-1/2 1-7/16 2-1/2 1-7/16 2-1/2 1-3/8 2-3/8 1-3/8 2-3/8 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Parabolic Flute Drills Jobber Length Size (in) 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 Dec. Equiv. .0960 .0935 .0890 .0860 .0820 .0810 .0785 .0760 .0730 .0700 .0670 .0635 .0595 .0550 .0520 .0465 .0430 .0420 .0410 .0400 .0390 .0380 .0370 .0360 .0350 .0330 .0320 .0310 .0292 .0280 .0260 .0250 .0240 .0225 .0210 .0200 .0180 .0160 .0145 .0135 Flute Overall Length Length (in) (in) 1-3/8 1-1/4 1-1/4 1-1/8 1-1/8 1-1/8 1 1 1 1 1 7/8 7/8 7/8 7/8 3/4 3/4 11/16 11/16 11/16 11/16 5/8 5/8 5/8 5/8 1/2 1/2 1/2 1/2 3/8 3/8 5/16 5/16 1/4 1/4 3/16 3/16 3/16 1/8 1/8 2-3/8 2-1/4 2-1/4 2-1/8 2-1/8 2-1/8 2 2 2 2 2 1-7/8 1-7/8 1-7/8 1-7/8 1-3/4 1-3/4 1-5/8 1-5/8 1-5/8 1-5/8 1-1/2 1-1/2 1-1/2 1-1/2 1-3/8 1-3/8 1-3/8 1-3/8 1-1/4 1-1/4 1-1/8 1-1/8 1 1 7/8 7/8 7/8 3/4 3/4 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 HIGH SPEED STEEL Parabolic drills are for deep hole drilling at higher feed rates in mild steel and nonferrous applications. • List No. 300PF – 135° Split Point Size (in) 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 Flute Overall Dec. Length Length Equiv. (in) (in) .0625 7/8 1-7/8 .0781 1 2 .0938 1-1/4 2-1/4 .1094 1-1/2 2-5/8 .1250 1-5/8 2-3/4 .1406 1-3/4 2-7/8 .1562 2 3-1/8 .1719 2-1/8 3-1/4 .1875 2-5/16 3-1/2 .2031 2-7/16 3-5/8 .2188 2-1/2 3-3/4 .2344 2-5/8 3-7/8 .2500 2-3/4 4 .2656 2-7/8 4-1/8 .2812 2-15/16 4-1/4 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 6 – Parabolic Flute Drills Continue – 22 - 24 Size (in) 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 Dec. Equiv. .2969 .3125 .3281 .3438 .3594 .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 Size (in) A B C D E F G H I J K L M Flute Overall Dec. Length Length Equiv. (in) (in) .2340 2-5/8 3-7/8 .2380 2-3/4 4 .2420 2-3/4 4 .2460 2-3/4 4 .2500 2-3/4 4 .2570 2-7/8 4-1/8 .2610 2-7/8 4-1/8 .2660 2-7/8 4-1/8 .2720 2-7/8 4-1/8 .2770 2-7/8 4-1/8 .2810 2-15/16 4-1/4 .2900 2-15/16 4-1/4 .2950 3-1/16 4-3/8 Pkg. Qty. 12 12 12 12 12 12 12 12 6 6 6 6 6 Size (in) Dec. Equiv. Size (in) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Dec. Equiv. .2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 .1850 .1820 .1800 .1770 .1730 .1695 .1660 .1610 .1590 .1570 .1540 .1520 .1495 .1470 .1440 Flute Overall Length Length (in) (in) 2-5/8 3-7/8 2-5/8 3-7/8 2-1/2 3-3/4 2-1/2 3-3/4 2-1/2 3-3/4 2-1/2 3-3/4 2-7/16 3-5/8 2-7/16 3-5/8 2-7/16 3-5/8 2-7/16 3-5/8 2-5/16 3-1/2 2-5/16 3-1/2 2-5/16 3-1/2 2-3/16 3-3/8 2-3/16 3-3/8 2-3/16 3-3/8 2-3/16 3-3/8 2-1/8 3-1/4 2-1/8 3-1/4 2-1/8 3-1/4 2-1/8 3-1/4 2 3-1/8 2 3-1/8 2 3-1/8 1-7/8 3 1-7/8 3 1-7/8 3 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 WIrE GAUGE SIzES Taper Length .3020 .3160 .3230 .3320 .3390 .3480 .3580 .3680 .3770 .3860 .3970 .4040 .4130 Flute Overall Length Length (in) (in) 3-1/16 3-3/16 3-5/16 3-7/16 3-7/16 3-1/2 3-1/2 3-5/8 3-5/8 3-3/4 3-3/4 3-7/8 3-7/8 Pkg. Qty. Size (in) Dec. Equiv. Flute Overall Length Length (in) (in) Pkg. Qty. Size (in) Dec. Equiv. Flute Overall Length Length (in) (in) Pkg. Qty. N O P Q R S T U V W X Y Z 4-3/8 4-1/2 4-5/8 4-3/4 4-3/4 4-7/8 4-7/8 5 5 5-1/8 5-1/8 5-1/4 5-1/4 6 6 6 6 6 6 6 6 6 6 6 6 6 .1405 1-3/4 2-7/8 12 28 29 .1360 1-3/4 2-7/8 12 .1285 1-5/8 2-3/4 12 30 31 .1200 1-5/8 2-3/4 12 32 .1160 1-5/8 2-3/4 12 33 .1130 1-1/2 2-5/8 12 34 .1110 1-1/2 2-5/8 12 .1100 1-1/2 2-5/8 12 35 36 .1065 1-7/16 2-1/2 12 37 .1040 1-7/16 2-1/2 12 38 .1015 1-7/16 2-1/2 12 39 .0995 1-3/8 2-3/8 12 40 .0980 1-3/8 2-3/8 12 41 .0960 1-3/8 2-3/8 12 42 .0935 1-1/4 2-1/4 12 43 .0890 1-1/4 2-1/4 12 44 .0860 1-1/8 2-1/8 12 45 .0820 1-1/8 2-1/8 12 46 .0810 1-1/8 2-1/8 12 47 .0785 1 2 12 48 .0760 1 2 12 49 .0730 1 2 12 50 .0700 1 2 12 51 .0670 1 2 12 52 .0635 7/8 1-7/8 12 *Screw Machine Lengths also available. Please inquire. • List No. 400PF – 135° Split Point FrACTIONAL SIzES • Set No. 307PF: 29 Piece High Speed Fractional Jobber Set 1/16 - 1/2 x 64ths in Metal Case FrACTIONAL SIzES Parabolic Flute Drills (Continued) LETTEr SIzES 307PF Flute Overall Length Length (in) (in) 3-1/16 3-3/16 3-5/16 3-7/16 3-1/2 3-5/8 3-3/4 3-7/8 3-15/16 4-1/16 4-3/16 4-5/16 4-3/8 4-1/2 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6 Pkg. Qty. 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Size (in) 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 Dec. Equiv. .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2656 .2812 .2969 .3125 .3281 .3438 .3594 Flute Overall Length Length (in) (in) 2-3/4 5-1/8 3 5-3/8 3 5-3/8 3-3/8 5-3/4 3-3/8 5-3/4 3-5/8 6 3-5/8 6 3-3/4 6-1/8 3-3/4 6-1/8 3-7/8 6-1/4 3-7/8 6-1/4 4 6-3/8 4 6-3/8 4-1/8 6-1/2 4-1/8 6-1/2 4-1/4 6-3/4 WWW.HANESSUPPLY.COM Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 6 6 6 6 6 6 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 9/16 19/32 5/8 23/32 3/4 .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 .5156 .5312 .5625 .5938 .6250 .7188 .7500 4-1/4 4-3/8 4-3/8 4-5/8 4-5/8 4-3/4 4-3/4 4-3/4 4-3/4 4-3/4 4-3/4 4-7/8 4-7/8 4-7/8 5-5/8 5-7/8 6-3/4 7 7 7-1/4 7-1/4 7-1/2 7-1/2 7-3/4 7-3/4 8 8 8-1/4 8-3/4 8-3/4 9-1/2 9-3/4 6 6 6 6 6 6 6 6 6 1 1 1 1 1 1 1 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Millimeter Jobber Length Drills Michigan Drill Millimeter Jobber Length Drills (continued) HIGH SPEED STEEL AND COBALT Size (mm) • Set No. 307D: 25 Piece High Speed Metric Set 1.00mm – 13.00mm x .5mm with Metal Case Size (mm) .15 .16 .17 .18 .19 .20 .22 .25 .26 .27 .28 .29 .30 .32 .35 .38 .40 .42 .44 .45 .48 .50 .55 .60 .65 .70 .75 .80 .85 .90 .95 1.00 1.05 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40 2.45 2.50 2.60 2.70 2.75 2.80 Dec. Equiv.(in) .0059 .0063 .0067 .0071 .0075 .0079 .0087 .0098 .0102 .0106 .0110 .0114 .0118 .0126 .0138 .0150 .0158 .0165 .0173 .0177 .0189 .0197 .0217 .0236 .0256 .0295 .0296 .0315 .0335 .0355 .0374 .0394 .0413 .0433 .0453 .0472 .0492 .0512 .0531 .0551 .0571 .0591 .0610 .0630 .0650 .0669 .0689 .0709 .0728 .0748 .0768 .0787 .0807 .0827 .0846 .0866 .0886 .0906 .0925 .0945 .0965 .0984 .1024 .1063 .1083 .1102 – continues – Flute Lgth.(in) 3/64 3/64 1/16 1/16 1/16 1/16 1/16 5/64 5/64 5/64 5/64 5/64 3/32 3/32 1/8 3/16 3/16 3/16 3/16 3/16 3/16 3/16 1/4 5/16 3/8 3/8 1/2 1/2 5/8 5/8 5/8 11/16 11/16 3/4 3/4 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1 1 1 1 1 1 1 1 1-1/8 1-1/8 1-1/8 1-1/4 1-1/4 1-1/4 1-1/4 1-3/8 1-3/8 1-3/8 1-7/16 1-7/16 1-1/2 1-1/2 Overall Lgth.(in) 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 7/8 7/8 1 1-1/8 1-1/4 1-1/4 1-3/8 1-3/8 1-1/2 1-1/2 1-1/2 1-5/8 1-5/8 1-3/4 1-3/4 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 2 2 2 2 2 2 2 2-1/8 2-1/8 2-1/8 2-1/8 2-1/4 2-1/4 2-1/4 2-1/4 2-3/8 2-3/8 2-3/8 2-1/2 2-1/2 2-5/8 2-5/8 Size (mm) 2.90 3.00 3.10 3.20 3.25 3.30 3.40 3.50 3.60 3.70 3.75 3.80 3.90 4.00 4.10 4.20 4.25 4.30 4.40 4.50 4.60 4.70 4.75 4.80 4.90 5.00 5.10 5.20 5.25 5.30 5.40 5.50 5.60 5.70 5.75 5.80 5.90 6.00 6.10 6.20 6.25 6.30 6.40 6.50 6.60 6.70 6.75 6.80 6.90 7.00 7.10 7.20 7.25 7.30 7.40 7.50 7.60 7.70 7.75 7.80 7.90 8.00 8.10 8.20 8.25 8.30 Dec. Equiv.(in) .1142 .1181 .1220 .1260 .1280 .1299 .1339 .1378 .1417 .1457 .1476 .1496 .1535 .1575 .1614 .1654 .1673 .1693 .1732 .1772 .1811 .1850 .1870 .1890 .1929 .1968 .2008 .2047 .2067 .2087 .2126 .2165 .2205 .2244 .2264 .2283 .2323 .2362 .2402 .2441 .2461 .2480 .2520 .2559 .2598 .2638 .2657 .2677 .2717 .2756 .2795 .2835 .2854 .2874 .2913 .2953 .2992 .3031 .3051 .3071 .3110 .3150 .3189 .3228 .3248 .3268 Flute Lgth.(in) 1-5/8 1-5/8 1-5/8 1-5/8 1-5/8 1-3/4 1-3/4 1-3/4 1-7/8 1-7/8 1-7/8 1-7/8 2 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-3/16 2-3/16 2-3/16 2-5/16 2-5/16 2-5/16 2-7/16 2-7/16 2-7/16 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-7/8 2-7/8 2-7/8 2-7/8 2-7/8 2-7/8 2-7/8 2-7/8 2-15/16 2-15/16 2-15/16 2-15/16 3-1/16 3-1/16 3-1/16 3-3/16 3-3/16 3-3/16 3-3/16 3-3/16 3-5/16 3-5/16 3-5/16 3-5/16 Overall Lgth.(in) 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-7/8 2-7/8 2-7/8 3 3 3 3 3-1/8 3-1/4 3-1/4 3-1/4 3-1/4 3-1/4 3-3/8 3-3/8 3-3/8 3-1/2 3-1/2 3-1/2 3-5/8 3-5/8 3-5/8 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-7/8 3-7/8 3-7/8 3-7/8 3-7/8 4 4 4 4 4 4-1/8 4-1/8 4-1/8 4-1/8 4-1/8 4-1/8 4-1/8 4-1/8 4-1/4 4-1/4 4-1/4 4-1/4 4-3/8 4-3/8 4-3/8 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-5/8 4-5/8 4-5/8 4-5/8 8.40 8.50 8.60 8.70 8.75 8.80 8.90 9.00 9.10 9.20 9.25 9.30 9.40 9.50 9.60 9.70 9.75 9.80 9.90 10.00 10.20 10.50 10.80 11.00 11.20 Dec. Equiv.(in) .3307 .3346 .3386 .3425 .3445 .3465 .3504 .3543 .3583 .3622 .3642 .3661 .3701 .3740 .3780 .3819 .3839 .3858 .3898 .3937 .4016 .4134 .4252 .4331 .4409 Flute Lgth.(in) 3-7/16 3-7/16 3-7/16 3-7/16 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-5/8 3-5/8 3-5/8 3-5/8 3-5/8 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-7/8 3-15/16 4-1/16 4-1/16 4-3/16 Overall Lgth.(in) Left Hand Drills 4-3/4 4-3/4 4-3/4 4-3/4 4-7/8 4-7/8 4-7/8 4-7/8 4-7/8 5 5 5 5 5 5-1/8 5-1/8 5-1/8 5-1/8 5-1/8 5-1/8 5-1/4 5-3/8 5-1/2 5-1/2 5-5/8 Size (mm) Dec. Equiv.(in) Flute Lgth.(in) Overall Lgth.(in) .4429 4-3/16 11.25 11.50 .4528 4-3/16 12.00 .4724 4-3/8 .4803 4-3/8 12.20 12.25 .4823 4-3/8 .4921 4-1/2 12.50 12.75 .5020 4-1/2 13.00 .5118 4-1/2 .5315 4-13/16 13.50 13.80 .5433 4-13/16 .5512 4-13/16 14.00 14.50 .5709 4-13/16 15.00 .5906 5-3/16 15.25 .6004 5-3/16 15.50 .6102 5-3/16 .6299 5-3/16 16.00 16.50 .6490 5-3/16 17.00 .6693 5-5/8 17.50 .6890 5-5/8 18.00 .7087 5-5/8 19.00 .7480 5-5/8 19.50 .7677 5-5/8 *Cobalt sizes smaller than 1.70mm furnished with 135-degree point NOT Split. 5-5/8 5-5/8 5-7/8 5-7/8 5-7/8 6 6 6 6-5/8 6-5/8 6-5/8 6-5/8 7-1/8 7-1/8 7-1/8 7-1/8 7-1/8 7-5/8 7-5/8 7-5/8 7-5/8 7-5/8 HIGH SPEED STEEL Jobber Length, 118° Point • List No. 300LH • Set No. 307LF: 29 Piece Fractional Jobber Set 1/16 - 1/2 x 64ths in Metal FrACTIONAL SIzES Size (in) 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 Flute Overall Length Length (in) (in) 3/16 3/4 1/2 1-3/8 3/4 1-3/4 7/8 1-7/8 1 2 1-1/4 2-1/4 1-1/2 2-5/8 1-5/8 2-3/4 1-3/4 2-7/8 2 3-1/8 2-1/8 3-1/4 2-5/16 3-1/2 2-7/16 3-5/8 2-1/2 3-3/4 2-5/8 3-7/8 2-3/4 4 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Flute Overall Dec. Length Length Equiv. (in) (in) .2340 2-5/8 3-7/8 .2380 2-3/4 4 .2420 2-3/4 4 .2460 2-3/4 4 .2500 2-3/4 4 .2570 2-7/8 4-1/8 .2610 2-7/8 4-1/8 .2660 2-7/8 4-1/8 .2720 2-7/8 4-1/8 .2770 2-7/8 4-1/8 .2810 2-15/16 4-1/4 .2900 2-15/16 4-1/4 .2950 3-1/16 4-3/8 Pkg. Qty. 12 12 12 12 12 12 12 12 6 6 6 6 6 Dec. Equiv. .0156 .0312 .0469 .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 LETTEr SIzES Size (in) A B C D E F G H I J K L M – Left Hand Drills Continue – WWW.HANESSUPPLY.COM Size (in) Dec. Equiv. Size (in) Dec. Equiv. 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 N O P Q R S T U V W X Y Z .2656 .2812 .2969 .3125 .3281 .3438 .3594 .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 .3020 .3160 .3230 .3320 .3390 .3480 .3580 .3680 .3770 .3860 .3970 .4040 .4130 Flute Overall Length Length (in) (in) Pkg. Qty. Flute Overall Length Length (in) (in) Pkg. Qty. 2-7/8 2-15/16 3-1/16 3-3/16 3-5/16 3-7/16 3-1/2 3-5/8 3-3/4 3-7/8 3-15/16 4-1/16 4-3/16 4-5/16 4-3/8 4-1/2 3-1/16 3-3/16 3-5/16 3-7/16 3-7/16 3-1/2 3-1/2 3-5/8 3-5/8 3-3/4 3-3/4 3-7/8 3-7/8 4-1/8 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6 4-3/8 4-1/2 4-5/8 4-3/4 4-3/4 4-7/8 4-7/8 5 5 5-1/8 5-1/8 5-1/4 5-1/4 12 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 22 - 25 22 Cutting Tools • List No. 301 – High Speed Steel, General Purpose, 118° Point • List No. 301C* – Super Cobalt, Heavy Duty, 135° Split Point .15mm – 7.40mm – 12 Pc. Per Pkg. 7.50mm – 14.00mm – 6 Pc. Per Pkg. 14.50mm – 19.50mm – 1 Pc. Per Pkg. Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Michigan Drill Cutting Tools 22 Left Hand Drills (continued) WIrE GAUGES SIzES Size (in) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Dec. Equiv. .2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 .1850 .1820 .1800 .1770 .1730 .1695 .1660 .1610 .1590 .1570 .1540 .1520 .1495 .1470 .1440 .1405 .1360 .1285 .1200 .1160 .1130 .1110 .1100 .1065 .1040 .1015 .0995 .0980 Flute Overall Length Length (in) (in) 2-5/8 3-7/8 2-5/8 3-7/8 2-1/2 3-3/4 2-1/2 3-3/4 2-1/2 3-3/4 2-1/2 3-3/4 2-7/16 3-5/8 2-7/16 3-5/8 2-7/16 3-5/8 2-7/16 3-5/8 2-5/16 3-1/2 2-5/16 3-1/2 2-5/16 3-1/2 2-3/16 3-3/8 2-3/16 3-3/8 2-3/16 3-3/8 2-3/16 3-3/8 2-1/8 3-1/4 2-1/8 3-1/4 2-1/8 3-1/4 2-1/8 3-1/4 2 3-1/8 2 3-1/8 2 3-1/8 1-7/8 3 1-7/8 3 1-7/8 3 1-3/4 2-7/8 1-3/4 2-7/8 1-5/8 2-3/4 1-5/8 2-3/4 1-5/8 2-3/4 1-1/2 2-5/8 1-1/2 2-5/8 1-1/2 2-5/8 1-7/16 2-1/2 1-7/16 2-1/2 1-7/16 2-1/2 1-3/8 2-3/8 1-3/8 2-3/8 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Size (in) 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 Dec. Equiv. .0960 .0935 .0890 .0860 .0820 .0810 .0785 .0760 .0730 .0700 .0670 .0635 .0595 .0550 .0520 .0465 .0430 .0420 .0410 .0400 .0390 .0380 .0370 .0360 .0350 .0330 .0320 .0310 .0292 .0280 .0260 .0250 .0240 .0225 .0210 .0200 .0180 .0160 .0145 .0135 Screw Machine Length Drills Flute Overall Length Length (in) (in) 1-3/8 2-3/8 1-1/4 2-1/4 1-1/4 2-1/4 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 1 2 1 2 1 2 1 2 1 2 7/8 1-7/8 7/8 1-7/8 7/8 1-7/8 7/8 1-7/8 3/4 1-3/4 3/4 1-3/4 11/16 1-5/8 11/16 1-5/8 11/16 1-5/8 11/16 1-5/8 5/8 1-1/2 5/8 1-1/2 5/8 1-1/2 5/8 1-1/2 1/2 1-3/8 1/2 1-3/8 1/2 1-3/8 1/2 1-3/8 3/8 1-1/4 3/8 1-1/4 5/16 1-1/8 5/16 1-1/8 1/4 1 1/4 1 3/16 7/8 3/16 7/8 3/16 7/8 1/8 3/4 1/8 3/4 Screw Machine Length Drills – Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 HIGH SPEED STEEL AND COBALT • List No. 600 – High Speed Steel, Bright Finish, 118° Standard Point • List No. 600A – High Speed Steel, Oxide Finish, 135° (NAS 907 TYPE C) • List No. 600C* – Super Cobalt, Heavy Duty, 135° Split Point - Screw machine drills are popular in the automotive and construction industries. Their short flute and overall length provide maximum rigidity. They are often used in screw machine set-ups where spindle clearance is limited. Set No. 607F: 29 Piece High Speed 135° Split Point Fractional Set 1/16 - 1/2 x 64ths in Metal Case Set No. 607W: 60 Piece High Speed Screw Machine No. 1-60 Set with Metal Case Shank Diameter Drill Size Up to 1" inclusive Over 1 to 1-1/4 Over 1-1/4 to 1-1/2 inclusive Over 1-1/2 to 2-1/2 inclusive FrACTIONAL SIzES Size (in) 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 Dec. Equiv. .0469 .0625 .0781 .0938 .1094 .1250 .1406 .1562 – continues – 22 - 26 Flute Length (in) 1/2 5/8 11/16 3/4 13/16 7/8 15/16 1 607F Shank Diameter Same as Drill Diameter 1 1-1/4 1-1/2 Overall Length Pkg. (in) Qty. 1-3/8 12 1-5/8 12 1-11/16 12 1-3/4 12 1-13/16 12 1-7/8 12 1-15/16 12 2-1/16 12 Size (in) 11/64 3/16 13/64 7/32 15/64 1/4 17/64 Dec. Equiv. .1719 .1875 .2031 .2188 .2344 .2500 .2656 Flute Length (in) 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 Overall Length (in) 2-1/8 2-3/16 2-1/4 2-3/8 2-7/16 2-1/2 2-5/8 Pkg. Qty. 12 12 12 12 12 12 12 FRACTIONAL SIZES (continued) Size (in) 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 Dec. Equiv. .2812 .2969 .3125 .3281 .3438 .3594 .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 .5156 .5312 .5469 .5625 .5781 .5938 .6094 .6250 .6406 .6562 .6719 .6875 .7031 .7188 .7344 .7500 .7656 .7812 .7969 .8125 .8281 .8438 .8594 .8750 .8906 .9062 .9219 .9375 .9531 Size Dec. Equiv. .2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 .1850 .1820 .1800 .1770 .1730 .1695 .1660 .1610 .1590 .1570 .1540 .1520 .1495 .1470 .1440 .1405 .1360 .1285 .1200 .1160 Flute Length (in) 1-1/2 1-9/16 1-5/8 1-11/16 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2 2-1/16 2-1/8 2-1/8 2-3/16 2-1/4 2-3/8 2-3/8 2-1/2 2-1/2 2-5/8 2-5/8 2-3/4 2-3/4 2-7/8 2-7/8 2-7/8 2-7/8 3 3 3-1/8 3-1/8 3-1/4 3-1/4 3-3/8 3-3/8 3-1/2 3-1/2 3-1/2 3-1/2 3-5/8 3-5/8 3-3/4 3-3/4 3-7/8 WIrE GAUGE SIzES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Flute Length (in) 1-5/16 1-5/16 1-1/4 1-1/4 1-1/4 1-1/4 1-3/16 1-3/16 1-3/16 1-3/16 1-3/16 1-3/16 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/16 1-1/16 1-1/16 1-1/16 1-1/16 1 1 1 1 1 15/16 15/16 15/16 7/8 7/8 Overall Length Pkg. (in) Qty. 2-11/16 6 2-3/4 6 2-13/16 6 2-15/16 6 3 6 3-1/16 6 3-1/8 6 3-1/4 6 3-5/16 6 3-3/8 6 3-7/16 6 3-9/16 6 3-5/8 6 3-11/16 6 3-3/4 6 3-7/8 1 3-7/8 1 4 1 4 1 4-1/8 1 4-1/8 1 4-1/4 1 4-1/4 1 4-1/2 1 4-1/2 1 4-5/8 1 4-5/8 1 4-3/4 1 4-3/4 1 5 1 5 1 5-1/8 1 5-1/8 1 5-1/4 1 5-1/4 1 5-3/8 1 5-3/8 1 5-1/2 1 5-1/2 1 5-5/8 1 5-5/8 1 5-3/4 1 5-3/4 1 5-7/8 1 Flute Overall Size Dec. Length Length Pkg. Equiv. (in) (in) Qty. (in) 31/32 .9688 3-7/8 5-7/8 1 .9844 4 6 1 63/64 1 1.0000 4 6 1 4 6-1/4 1 1-1/32 1.0312 1-1/16 1.0625 4 6-1/4 1 1-3/32 1.0938 4 6-3/8 1 1-1/8 1.1250 4 6-3/8 1 1-5/32 1.1562 4-1/4 6-5/8 1 6-5/8 1 1-3/16 1.1875 4-1/4 1-7/32 1.2188 4-3/8 6-3/4 1 1-1/4 1.2500 4-3/8 6-3/4 1 1-9/32 1.2812 4-3/8 7 1 1-5/16 1.3125 4-3/8 7 1 7-1/8 1 1-11/32 1.3438 4-1/2 1-3/8 1.3750 4-1/2 7-1/8 1 7-3/8 1 1-13/32 1.4062 4-3/4 1-7/16 1.4375 4-3/4 7-3/8 1 1-15/32 1.4688 4-7/8 7-1/2 1 1-1/2 1.5000 4-7/8 7-1/2 1 1-17/32 1.5312 4-7/8 7-3/4 1 1-9/16 1.5625 4-7/8 7-3/4 1 1-19/32 1.5938 4-7/8 7-3/4 1 7-3/4 1 1-5/8 1.6250 4-7/8 1-21/32 1.6562 5-1/8 8 1 8 1 1-11/16 1.6875 5-1/8 1-23/32 1.7188 5-1/8 8 1 1-3/4 1.7500 5-1/8 8 1 1-25/32 1.7812 5-3/8 8-1/4 1 1-13/16 1.8125 5-3/8 8-1/4 1 8-1/4 1 1-27/32 1.8438 5-3/8 1-7/8 1.8750 5-3/8 8-1/4 1 1-29/32 1.9062 5-5/8 8-1/2 1 1-15/16 1.9375 5-5/8 8-1/2 1 2 2.0000 5-5/8 8-1/2 1 2-1/16 2.0625 5-5/8 8-1/2 1 2-1/8 2.1250 5-5/8 8-1/2 1 2-3/16 2.1875 5-5/8 8-1/2 1 2-1/4 2.2500 5-5/8 8-1/2 1 2-3/8 2.3750 5-5/8 8-1/2 1 2-1/2 2.5000 5-5/8 8-1/2 1 *High Speed Steel and Cobalt sizes under 1/16 furnished with 135-degree point - NOT split. Cobalt sizes over 1/2 furnished with notched point. Overall Length (in) 2-7/16 2-7/16 2-3/8 2-3/8 2-3/8 2-3/8 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-3/16 2-3/16 2-3/16 2-3/16 2-3/16 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/16 2-1/16 2-1/16 2-1/16 2-1/16 1-15/16 1-15/16 1-15/16 1-7/8 1-7/8 Flute Overall Size Dec. Length Length Pkg. (in) Equiv. (in) (in) Qty. 33 .1130 7/8 1-7/8 34 .1110 7/8 1-7/8 35 .1100 7/8 1-7/8 36 .1065 13/16 1-13/16 37 .1040 13/16 1-13/16 38 .1015 13/16 1-13/16 39 .0995 13/16 1-13/16 40 .0980 13/16 1-13/16 41 .0960 13/16 1-13/16 42 .0935 3/4 1-3/4 43 .0890 3/4 1-3/4 44 .0860 3/4 1-3/4 45 .0820 3/4 1-3/4 46 .0810 3/4 1-3/4 47 .0785 3/4 1-3/4 48 .0760 11/16 1-11/16 49 .0730 11/16 1-11/16 50 .0700 11/16 1-11/16 51 .0670 11/16 1-11/16 52 .0635 11/16 1-11/16 53 .0595 5/8 1-5/8 54 .0550 5/8 1-5/8 55 .0520 5/8 1-5/8 56 .0465 1/2 1-3/8 57 .0430 1/2 1-3/8 58 .0420 1/2 1-3/8 59 .0410 1/2 1-3/8 60 .0400 1/2 1-3/8 61 .0390 1/2 1-1/4 *High Speed Steel and Cobalt sizes 53 - 61 are furnished with 135-degree - NOT Split. – Screw Machine Length Drills Continue – WWW.HANESSUPPLY.COM Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Screw Machine Length Drills (continued) LETTEr SIzES Size Overall Length (in) 2-7/16 2-1/2 2-1/2 2-1/2 2-1/2 2-5/8 2-5/8 2-11/16 2-11/16 2-11/16 2-11/16 2-3/4 2-3/4 Pkg. Qty. 12 12 12 12 12 12 12 12 6 6 6 6 6 Taper Length Drills Size N O P Q R S T U V W X Y Z Taper Length Drills – Dec. Equiv. .3020 .3160 .3230 .3320 .3390 .3480 .3580 .3680 .3770 .3860 .3970 .4040 .4130 Flute Overall Length Length (in) (in) 1-5/8 2-13/16 1-11/16 2-15/16 1-11/16 2-15/16 1-11/16 3 1-11/16 3 1-3/4 3-1/16 1-3/4 3-1/16 1-13/16 3-1/8 1-7/8 3-1/4 1-7/8 3-1/4 1-15/16 3-5/16 1-15/16 3-5/16 2 3-3/8 FRACTIONAL SIZES (continued) Pkg. Qty. 6 6 6 6 6 6 6 6 6 6 6 6 6 HIGH SPEED STEEL AND COBALT • List No. 400 – High Speed Steel, General Purpose, 118° Point • List No. 410C* – Super Cobalt, Heavy Duty, 135° Split Point - Taper Length drills are designed for general purpose drilling where long length is required. - Used in production drilling, they have the same flute length as Taper Shank drills. • Set No. 407A: 29 Piece High Speed Fractional Set 1/16 - 1/2 x 64ths in Metal Case • Set No.407W: 60 Piece High Speed Taper Length No. 1-60 Set with Metal Case FrACTIONAL SIzES Size (in) 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 Dec. Equiv. .0156 .0312 .0469 .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2656 .2812 .2969 .3125 .3281 .3438 .3594 .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 .5156 .5312 .5469 .5625 .5781 .5938 .6094 .6250 .6406 .6562 – continues – Flute Overall Length Length (in) (in) 5/16 1-1/2 3/4 2 1-1/8 2-1/4 1-3/4 3 2 3-3/4 2-1/4 4-1/4 2-1/2 4-5/8 2-3/4 5-1/8 3 5-3/8 3 5-3/8 3-3/8 5-3/4 3-3/8 5-3/4 3-5/8 6 3-5/8 6 3-3/4 6-1/8 3-3/4 6-1/8 3-7/8 6-1/4 3-7/8 6-1/4 4 6-3/8 4 6-3/8 4-1/8 6-1/2 4-1/8 6-1/2 4-1/4 6-3/4 4-1/4 6-3/4 4-3/8 7 4-3/8 7 4-5/8 7-1/4 4-5/8 7-1/4 4-3/4 7-1/2 4-3/4 7-1/2 4-3/4 7-3/4 4-3/4 7-3/4 4-3/4 8 4-3/4 8 4-7/8 8-1/4 4-7/8 8-1/4 4-7/8 8-3/4 4-7/8 8-3/4 4-7/8 8-3/4 4-7/8 8-3/4 5-1/8 9 5-1/8 9 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 1 1 1 1 1 1 1 1 1 1 Size (in) 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1 1-1/64 1-1/32 1-3/64 1-1/16 1-5/64 1-3/32 1-7/64 1-1/8 1-9/64 1-5/32 1-11/64 1-3/16 1-13/64 1-7/32 1-15/64 1-1/4 1-9/32 1-5/16 1-11/32 1-3/8 407A Dec. Equiv. .6719 .6875 .7031 .7188 .7344 .7500 .7656 .7812 .7969 .8125 .8281 .8438 .8594 .8750 .8906 .9062 .9219 .9375 .9531 .9688 .9844 1.0000 1.0156 1.0312 1.0469 1.0625 1.0781 1.0938 1.1094 1.1250 1.1406 1.1562 1.1719 1.1875 1.2031 1.2188 1.2344 1.2500 1.2812 1.3125 1.3438 1.3750 Flute Length (in) 5-3/8 5-3/8 5-5/8 5-5/8 5-7/8 5-7/8 6 6 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-3/8 6-3/8 6-3/8 6-3/8 6-1/2 6-1/2 6-5/8 6-5/8 6-7/8 6-7/8 7-1/8 7-1/8 7-1/4 7-1/4 7-3/8 7-3/8 7-1/2 7-1/2 7-7/8 7-7/8 8-1/2 8-5/8 8-3/4 8-7/8 Overall Length (in) 9-1/4 9-1/4 9-1/2 9-1/2 9-3/4 9-3/4 9-7/8 9-7/8 10 10 10 10 10 10 10 10 10-3/4 10-3/4 11 11 11 11 11-1/8 11-1/8 11-1/4 11-1/4 11-1/2 11-1/2 11-3/4 11-3/4 11-7/8 11-7/8 12 12 12-1/8 12-1/8 12-1/2 12-1/2 14-1/8 14-1/4 14-3/8 14-1/2 Pkg. Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1-13/32 1-7/16 1-15/32 1-1/2 1-9/16 1-5/8 1-11/16 1.4062 1.4375 1.4688 1.5000 1.5625 1.6250 1.6875 9 9-1/8 9-1/4 9-3/8 9-5/8 9-7/8 10-1/8 14-5/8 14-3/4 14-7/8 15 15-1/4 15-5/8 16 Size (in) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Dec. Equiv. .2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 .1850 .1820 .1800 .1770 .1730 .1695 .1660 .1610 .1590 .1570 .1540 .1520 .1495 .1470 .1440 .1405 .1360 .1285 .1200 .1160 .1130 .1110 .1100 .1065 .1040 .1015 .0995 .0980 Flute Overall Length Length (in) (in) 3-3/4 6-1/8 3-3/4 6-1/8 3-5/8 6 3-5/8 6 3-5/8 6 3-5/8 6 3-5/8 6 3-5/8 6 3-5/8 6 3-5/8 6 3-5/8 6 3-5/8 6 3-3/8 5-3/4 3-3/8 5-3/4 3-3/8 5-3/4 3-3/8 5-3/4 3-3/8 5-3/4 3-3/8 5-3/4 3-3/8 5-3/4 3-3/8 5-3/4 3-3/8 5-3/4 3-3/8 5-3/4 3 5-3/8 3 5-3/8 3 5-3/8 3 5-3/8 3 5-3/8 3 5-3/8 3 5-3/8 3 5-3/8 2-3/4 5-1/8 2-3/4 5-1/8 2-3/4 5-1/8 2-3/4 5-1/8 2-3/4 5-1/8 2-1/2 4-5/8 2-1/2 4-5/8 2-1/2 4-5/8 2-1/2 4-5/8 2-1/2 4-5/8 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Size (in) 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 Dec. Equiv. .0960 .0935 .0890 .0860 .0820 .0810 .0785 .0760 .0730 .0700 .0670 .0635 .0595 .0550 .0520 .0465 .0430 .0420 .0410 .0400 .0390 .0380 .0370 .0360 .0350 .0330 .0320 .0310 .0292 .0280 .0260 .0250 .0240 .0225 .0210 .0200 .0180 .0160 .0145 .0135 Flute Overall Length Length (in) (in) 2-1/2 4-5/8 2-1/4 4-1/4 2-1/4 4-1/4 2-1/4 4-1/4 2-1/4 4-1/4 2-1/4 4-1/4 2-1/4 4-1/4 2 3-3/4 2 3-3/4 2 3-3/4 2 3-3/4 2 3-3/4 1-3/4 3 1-3/4 3 1-3/4 3 1-1/8 2-1/4 1-1/8 2-1/4 1-1/8 2-1/4 1-1/8 2-1/4 1-1/8 2-1/4 1-1/8 2-1/4 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 5/16 1-1/2 5/16 1-1/2 5/16 1-1/2 5/16 1-1/2 5/16 1-1/2 5/16 1-1/2 5/16 1-1/2 5/16 1-1/2 5/16 1-1/2 Pkg. Qty. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Size (in) A B C D E F G H I J K L M Dec. Equiv. .2340 .2380 .2420 .2460 .2500 .2570 .2610 .2660 .2720 .2770 .2810 .2900 .2950 Flute Overall Length Length (in) (in) 3-3/4 6-1/8 3-3/4 6-1/8 3-3/4 6-1/8 3-3/4 6-1/8 3-3/4 6-1/8 3-7/8 6-1/4 3-7/8 6-1/4 3-7/8 6-1/4 3-7/8 6-1/4 3-7/8 6-1/4 3-7/8 6-1/4 4 6-3/8 4 6-3/8 Pkg. Qty. 12 12 12 12 12 12 12 12 12 6 6 6 6 Size (in) N O P Q R S T U V W X Y Z Dec. Equiv. .3020 .3160 .3230 .3320 .3390 .3480 .3580 .3680 .3770 .3860 .3970 .4040 .4130 Flute Overall Length Length (in) (in) 4 6-3/8 4-1/8 6-1/2 4-1/8 6-1/2 4-1/8 6-1/2 4-1/8 6-1/2 4-1/4 6-3/4 4-1/4 6-3/4 4-1/4 6-3/4 4-3/8 7 4-3/8 7 4-3/8 7 4-3/8 7 4-5/8 7-1/4 Pkg. Qty. 6 6 6 6 6 6 6 6 6 6 6 6 6 WIrE GAUGES SIzES LETTEr SIzES WWW.HANESSUPPLY.COM 1 1 1 1 1 1 1 1-3/4 1.7500 10-1/2 16-1/4 1-13/16 1.8125 10-1/2 16-1/4 1-7/8 1.8700 10-5/8 16-1/4 1-15/16 1.9375 10-3/4 16-5/8 2 2.0000 10-3/4 17-1/4 *Cobalt sizes over 1/2 furnished with notched point. 1 1 1 1 1 22 - 27 22 Cutting Tools A B C D E F G H I J K L M Dec. Equiv. .2340 .2380 .2420 .2460 .2500 .2570 .2610 .2660 .2720 .2770 .2810 .2900 .2950 Flute Length (in) 1-5/16 1-3/8 1-3/8 1-3/8 1-3/8 1-7/16 1-7/16 1-1/2 1-1/2 1-1/2 1-1/2 1-9/16 1-9/16 Michigan Drill Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 reduced Shank Drills Michigan Drill HIGH SPEED STEEL & COBALT 1/2" Shanks – Silver and Deming • List No. 303 – High Speed Steel, 118° Point 1/2" Standard Shank • List No. 303C – Cobalt, 135° Notched Point 1/2" Standard Shank • List No. 303F – High Speed Steel, 118° Point, Flatted Shank 3-Equal-Flats for Positive Holding in 3-Jaw Chucks • List No. 303CF – Cobalt, 135° Notched Point, Flattened Shank 3-Equal-Flats for Positive Holding in 3-Jaw Chucks Size (in) 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 Dec. Equiv. .5000 .5156 .5312 .5469 .5625 .5781 .5938 .6094 .6250 .6406 .6562 .6719 .6875 .7031 .7188 .7344 .7500 .7656 .7812 .7969 .8125 .8281 Size (in) 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1 1-1/64 1-1/32 1-3/64 1-1/16 1-5/64 1-3/32 1-7/64 1-1/8 1-9/64 1-5/32 1-11/64 reduced Shank Drills Dec. Equiv. .8438 .8594 .8750 .8906 .9062 .9219 .9375 .9531 .9688 .9844 1.0000 1.0156 1.0312 1.0469 1.0625 1.0781 1.0938 1.1094 1.1250 1.1406 1.1562 1.1719 Size (in) 1-3/16 1-13/64 1-7/32 1-15/64 1-1/4 1-17/64 1-9/32 1-19/64 1-5/16 1-21/64 1-11/32 1-23/64 1-3/8 1-25/64 1-13/32 1-27/64 1-7/16 1-29/64 1-15/32 1-31/64 1-1/2 Dec. Equiv. 1.1875 1.2031 1.2188 1.2344 1.2500 1.2656 1.2812 1.2969 1.3125 1.3281 1.3438 1.3594 1.3750 1.3906 1.4062 1.4219 1.4375 1.4531 1.4688 1.4844 1.5000 HIGH SPEED STEEL & COBALT 1/2" Shank - Silver and Deming • List No. 303M – High Speed Steel, 118° Point - Metric Sizes (All sizes 6" overall with 3" flute length) Size (in) Dec. Equiv. 14.00 .5512 15.00 .5906 16.00 .6299 17.00 .6693 18.00 .7087 19.00 .7480 20.00 .7874 21.00 .8268 Size (in) Dec. Equiv. 22.00 .8661 24.00 .9449 26.00 1.0236 27.00 1.0630 28.00 1.1024 29.00 1.1417 30.00 1.1811 31.00 1.2205 1/4" Shank - Metal Working • List No. 304 – High Speed Steel, 118° Point Size (in) Dec. Equiv. 17/64 .2656 9/32 .2812 19/64 .2969 5/16 .3125 21/64 .3281 11/32 .3438 23/64 .3594 3/8 .3750 Size (in) Dec. Equiv. 25/64 .3906 13/32 .4062 27/64 .4219 7/16 .4375 29/64 .4531 15/32 .4688 31/64 .4844 1/2 .5000 Reduced Shank Drills – 3/8" Shank - Metal Working (continued) Size (in) 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 Dec. Equiv. .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 .5156 .5312 .5469 .5625 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 Dec. Equiv. .5781 .5938 .6094 .6250 .6406 .6562 .6719 .6875 .7031 .7188 .7344 .7500 308 3/4" Shank - boring Mill and Screw Machine • List No. 306 – High Speed Steel, 118° Point • List No. 306C – Cobalt, 135° Notched Point • Set 306A – 5 Piece Set Contains 1 piece of each: 1", 1-1/8, 1-1/4, 1-3/8, 1-1/2 Supplied in wood block • Set 306b – 5 Piece Set Contains 1 piece of each: 1", 1-1/4, 1-1/2, 1-3/4, 2" Supplied in wood block • Set 306D – 5 Pieces Set Contains 1 piece of each: 1", 1-1/8, 1-1/4, 1-3/8, 1-1/2 Supplied in wood block • Set 306E – 5 Piece Set contains 1 piece of each: 1", 1-1/4, 1-1/2, 1-3/4, 2" Supplied in wood block Size (in) 25/32 13/16 27/32 7/8 29/32 15/16 31/32 1 1-1/32 1-1/16 1-3/32 1-1/8 1-5/32 1-3/16 1-7/32 1-1/4 Dec. Equiv. .7812 .8125 .8438 .8750 .9062 .9375 .9688 1.0000 1.0312 1.0625 1.0938 1.1250 1.1562 1.1875 1.2188 1.2500 303M 304 3/8" Shank - Metal Working • List No. 308 – High Speed Steel, 118° Point • List No. 308C – Cobalt, 135° Notched Point • Set 308A – 3/8" Shank H.S. Drill Set 29 Piece Set Contains 1 piece of each: 1/16" thru 3/8" by 64ths (Shanks same size as cutting diameters) and 25/64" thru 1/2" by 64ths (with 3/8" shanks) Supplied in metal case • Set 308D – 3/8" Shank H.S. Drill Set 8 Piece Contains 1 piece of each: 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16 and 5/8 Supplied in wood block. – continues – 22 - 28 Size (in) WWW.HANESSUPPLY.COM Size (in) 1-9/32 1-5/16 1-11/32 1-3/8 1-13/32 1-7/16 1-15/32 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2 Dec. Equiv. 1.2812 1.3125 1.3438 1.3750 1.4062 1.4375 1.4688 1.5000 1.5625 1.6250 1.6875 1.7500 1.8125 1.8750 1.9375 2.0000 306 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Aircraft Extension Drills Split Point* Michigan Drill HIGH SPEED STEEL & COBALT 12 INCH OVERALL LENGTH • List No. 912 – High Speed Steel • List No. 912C – Cobalt • Set No 912SF: 29 Pieces H.S. 12" OAL Fractional Set 1/16 - 1/2 x 64ths in metal stand. Size 65 60 59 58 57 56 3/64 55 54 53 1/16 52 51 50 49 48 5/64 47 46 45 44 43 42 3/32 41 40 39 38 37 36 7/64 35 34 33 32 31 1/8 30 29 28 9/64 27 26 25 24 23 5/32 22 21 20 19 18 11/64 17 16 15 14 13 3/16 12 Dec. Equiv. .0350 .0400 .0410 .0420 .0430 .0465 .0469 .0520 .0550 .0595 .0625 .0635 .0670 .0700 .0730 .0760 .0781 .0785 .0810 .0820 .0860 .0890 .0935 .0938 .0960 .0980 .0995 .1015 .1040 .1065 .1094 .1100 .1110 .1130 .1160 .1200 .1250 .1285 .1360 .1405 .1406 .1440 .1470 .1495 .1520 .1540 .1562 .1570 .1590 .1610 .1660 .1695 .1719 .1730 .1770 .1800 .1820 .1850 .1875 .1890 Flute Lgth (in) 5/8 11/16 11/16 11/16 3/4 3/4 3/4 7/8 7/8 7/8 7/8 7/8 1 1 1 1 1 1 1-1/8 1-1/8 1-1/8 1-1/4 1-1/4 1-1/4 1-3/8 1-3/8 1-3/8 1-7/16 1-7/16 1-7/16 1-1/2 1-1/2 1-1/2 1-1/2 1-5/8 1-5/8 1-5/8 1-5/8 1-3/4 1-3/4 1-3/4 1-7/8 1-7/8 1-7/8 2 2 2 2 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-3/16 2-3/16 2-3/16 2-3/16 2-5/16 2-5/16 2-5/16 Size Dec. Equiv. 912SF Flute Lgth (in) 11 .1910 2-5/16 .1935 2-7/16 10 9 .1960 2-7/16 8 .1990 2-7/16 7 .2010 2-7/16 13/64 .2031 2-7/16 6 .2040 2-1/2 5 .2055 2-1/2 4 .2090 2-1/2 3 .2130 2-1/2 .2188 2-1/2 7/32 2 .2210 2-5/8 1 .2280 2-5/8 A .2340 2-5/8 15/64 .2344 2-5/8 B .2380 2-3/4 C .2420 2-3/4 .2460 2-3/4 D 1/4 .2500 2-3/4 E .2500 2-3/4 F .2570 2-7/8 G .2610 2-7/8 17/64 .2656 2-7/8 H .2660 2-7/8 I .2720 2-7/8 J .2770 2-7/8 K .2810 2-15/16 9/32 .2812 2-15/16 L .2900 2-15/16 M .2950 3-1/16 19/64 .2969 3-1/16 N .3020 3-1/16 5/16 .3125 3-3/16 O .3160 3-3/16 P .3230 3-5/16 21/64 .3281 3-5/16 Q .3320 3-7/16 R .3390 3-7/16 11/32 .3438 3-7/16 S .3480 3-1/2 T .3580 3-1/2 23/64 .3594 3-1/2 U .3680 3-5/8 3/8 .3750 3-5/8 V .3770 3-5/8 W .3860 3-3/4 25/64 .3906 3-3/4 X .3970 3-3/4 Y .4040 3-7/8 13/32 .4062 3-7/8 Z .4130 3-7/8 27/64 .4219 3-15/16 7/16 .4375 4-1/16 29/64 .4531 4-3/16 15/32 .4688 4-5/16 31/64 .4844 4-3/8 1/2 .5000 4-1/2 * Sizes smaller than 1/16 are NOT split. ** Fast spiral also available in stock. HIGH SPEED STEEL Straight Shank, 118° Point (Additional Lengths Available) Size 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 "F" 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 Dec. Equiv. .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2570 .2656 .2812 .2969 .3125 .3281 .3438 .3594 .3750 Size 25/64 13/32 27/64 11mm 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 Dec. Equiv. Size .3906 .4062 .4219 .4331 .4375 .4531 .4688 .4844 .5000 .5156 .5312 .5469 .5625 .5781 .5938 .6094 .6250 .6406 .6562 .6719 .6875 .7031 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1 1-1/8 1-3/16 1-1/4 Extra Length Cobalt Drills Dec. Size Equiv. 19/64 .2969 5/16 .3125 13/32 .4062 27/64 .4219 27/64 .4219 7/16 .4375 9/16 .5625 43/64 .6719 11/116 .6875 Subject to prior sale. List No. 208C 208C 208C 208C 209C 212C 211C 213C 212C Flute Lgth (in) 5 5 6-1/2 6-3/4 6-1/2 9-3/4 9 9-3/4 9 Taper Shank Drills Dec. Equiv. .7188 .7344 .7500 .7656 .7812 .7969 .8125 .8281 .8438 .8594 .8750 .8906 .9062 .9219 .9375 .9531 .9688 .9844 1.0000 1.1250 1.1875 1.2500 Overall Lgth (in) 8 8 8 8 9 12 11 13 12 HIGH SPEED STEEL General Purpose, 118° Point • List No. 200 – Standard Shanks • Set No. 200A – 16 Piece HS Fractional Set 33/64 – 3/4 x 64ths in Metal Case 200A FrACTIONAL SIzES Size 1/16 5/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 Flute Overall Morse Dec. Length Length Taper Equiv. (in) (in) No. .0625 1-1/4 4-5/8 1 .0781 1-3/8 4-3/4 1 .1250 1-7/8 5-1/8 1 .1406 2-1/8 5-3/8 1 .1562 2-1/8 5-3/8 1 .1719 2-1/2 5-3/4 1 .1875 2-1/2 5-3/4 1 .2031 2-3/4 6 1 .2188 2-3/4 6 1 .2344 2-7/8 6-1/8 1 .2500 2-7/8 6-1/8 1 .2656 3 6-1/4 1 .2812 3 6-1/4 1 .2969 3-1/8 6-3/8 1 .3125 3-1/8 6-3/8 1 .3281 3-1/4 6-1/2 1 .3438 3-1/4 6-1/2 1 .3594 3-1/2 6-3/4 1 .3750 3-1/2 6-3/4 1 .3906 3-5/8 7 1 .4062 3-5/8 7 1 .4219 3-7/8 7-1/4 1 .4375 3-7/8 7-1/4 1 .4531 4-1/8 7-1/2 1 .4688 4-1/8 7-1/2 1 .4844 4-3/8 8-1/4 2 .5000 4-3/8 8-1/4 2 – continues – WWW.HANESSUPPLY.COM Size 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 Flute Overall Morse Dec. Length Length Taper Equiv. (in) (in) No. .5156 4-5/8 8-1/2 2 .5312 4-5/8 8-1/2 2 .5469 4-7/8 8-3/4 2 .5625 4-7/8 8-3/4 2 .5781 4-7/8 8-3/4 2 .5938 4-7/8 8-3/4 2 .6094 4-7/8 8-3/4 2 .6250 4-7/8 8-3/4 2 .6406 5-1/8 9 2 .6562 5-1/8 9 2 .6719 5-3/8 9-1/4 2 .6875 5-3/8 9-1/4 2 .7031 5-5/8 9-1/2 2 .7188 5-5/8 9-1/2 2 .7344 5-7/8 9-3/4 2 .7500 5-7/8 9-3/4 2 .7656 6 9-7/8 2 .7812 6 9-7/8 2 .7969 6-1/8 10-3/4 3 .8125 6-1/8 10-3/4 3 .8281 6-1/8 10-3/4 3 .8438 6-1/8 10-3/4 3 .8594 6-1/8 10-3/4 3 .8750 6-1/8 10-3/4 3 .8906 6-1/8 10-3/4 3 .9062 6-1/8 10-3/4 3 .9219 6-1/8 10-3/4 3 22 - 29 22 Cutting Tools 6 INCH OVERALL LENGTH • List No. 906 – High Speed Steel • List No. 906C – Cobalt Extra Length Drills Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Michigan Drill Taper Shank Drills (Continued) – Taper Shank Drills – FRACTIONAL SIZES (continued) Size 15/16 61/64 31/32 63/64 1 1-1/64 1-1/32 1-3/64 1-1/16 1-5/64 1-3/32 1-7/64 1-1/8 1-9/64 1-5/32 1-11/64 1-3/16 1-13/64 1-7/32 1-15/64 1-1/4 1-17/64 1-9/32 1-19/64 1-5/16 1-21/64 1-11/32 1-23/64 1-3/8 1-25/64 1-13/32 1-27/64 1-7/16 1-29/64 1-15/32 1-31/64 1-1/2 1-33/64 1-17/32 1-35/64 1-9/16 1-37/64 1-19/32 1-39/64 1-5/8 1-41/64 1-21/32 1-43/64 1-11/16 1-45/64 1-23/32 Flute Overall Morse Dec. Length Length Taper Equiv. (in) (in) No. .9375 6-1/8 10-3/4 3 .9531 6-3/8 11 3 .9688 6-3/8 11 3 .9844 6-3/8 11 3 1.0000 6-3/8 11 3 1.0156 6-1/2 11-1/8 3 1.0312 6-1/2 11-1/8 3 1.0469 6-5/8 11-1/4 3 1.0625 6-5/8 11-1/4 3 1.0781 6-7/8 12-1/2 4 1.0938 6-7/8 12-1/2 4 1.1094 7-1/8 12-3/4 4 1.1250 7-1/8 12-3/4 4 1.1406 7-1/4 12-7/8 4 1.1562 7-1/4 12-7/8 4 1.1719 7-3/8 13 4 1.1875 7-3/8 13 4 1.2031 7-1/2 13-1/8 4 1.2188 7-1/2 13-1/8 4 1.2344 7-7/8 13-1/2 4 1.2500 7-7/8 13-1/2 4 1.2656 8-1/2 14-1/8 4 1.2812 8-1/2 14-1/8 4 1.2969 8-5/8 14-1/4 4 1.3125 8-5/8 14-1/4 4 1.3281 8-3/4 14-3/8 4 1.3438 8-3/4 14-3/8 4 1.3594 8-7/8 14-1/2 4 1.3750 8-7/8 14-1/2 4 1.3906 9 14-5/8 4 1.4062 9 14-5/8 4 1.4219 9-1/8 14-3/4 4 1.4375 9-1/8 14-3/4 4 1.4531 9-1/4 14-7/8 4 1.4688 9-1/4 14-7/8 4 1.4844 9-3/8 15 4 1.5000 9-3/8 15 4 1.5156 9-3/8 16-3/8 5 1.5312 9-3/8 16-3/8 5 1.5469 9-5/8 16-5/8 5 1.5625 9-5/8 16-5/8 5 1.5781 9-7/8 16-7/8 5 1.5938 9-7/8 16-7/8 5 1.6094 10 17 5 1.6250 10 17 5 1.6406 10-1/8 17-1/8 5 1.6562 10-1/8 17-1/8 5 1.6719 10-1/8 17-1/8 5 1.6875 10-1/8 17-1/8 5 1.7031 10-1/8 17-1/8 5 1.7188 10-1/8 17-1/8 5 Taper Shank Drills HIGH SPEED STEEL • List No. 201 LETTEr SIzES Furnished with #1 Morse Taper Shank – Taper Shank Drills Continue – 22 - 30 Flute Overall Morse Dec. Length Length Taper Size Equiv. (in) (in) No. 1-47/64 1.7344 10-1/8 17-1/8 5 1-3/4 1.7500 10-1/8 17-1/8 5 1-25/32 1.7812 10-1/8 17-1/8 5 1-13/16 1.8125 10-1/8 17-1/8 5 5 1-27/32 1.8438 10-18 17-1/8 1-7/8 1.8750 10-3/8 17-3/8 5 1-29/32 1.9062 10-3/8 17-3/8 5 1-15/16 1.9375 10-3/8 17-3/8 5 1-31/32 1.9688 10-3/8 17-3/8 5 2.0000 10-3/8 17-3/8 5 2 2-1/32 2.0312 10-3/8 17-3/8 5 5 2-1/16 2.0625 10-1/4 17-3/8 2-3/32 2.0938 10-1/4 17-3/8 5 2-1/8 2.1250 10-1/4 17-3/8 5 2-5/32 2.1562 10-1/4 17-3/8 5 2-3/16 2.1875 10-1/4 17-3/8 5 5 2-7/32 2.2188 10-1/8 17-3/8 2-1/4 2.2500 10-1/8 17-3/8 5 2-9/32 2.2812 10-1/8 17-3/8 5 2-5/16 2.3125 10-1/8 17-3/8 5 2-11/32 2.3438 10-1/8 17-3/8 5 5 2-3/8 2.3750 10-1/8 17-3/8 2-13/32 2.4062 11-1/4 18-3/4 5 2-7/16 2.4375 11-1/4 18-3/4 5 2-15/32 2.4688 11-1/4 18-3/4 5 2-1/2 2.5000 11-1/4 18-3/4 5 2-17/32 2.5312 11-7/8 19-1/2 5 2-9/16 2.5625 11-7/8 19-1/2 5 2-5/8 2.6250 11-7/8 19-1/2 5 2-11/16 2.6875 12-3/4 20-3/8 5 2-23/32 2.7188 12-3/4 20-3/8 5 2-3/4 2.7500 12-3/4 20-3/8 5 2-13/16 2.8125 13-3/8 21-1/8 5 2-27/32 2.8438 13-3/8 21-1/8 5 2-7/8 2.8750 13-3/8 21-1/8 5 2-15/16 2.9375 14 21-3/4 5 3 3.0000 14 21-3/4 5 3-1/16 3.0625 14-5/8 24-1/2 6 3-1/8 3.1250 14-5/8 24-1/2 6 3-3/16 3.1875 14-5/8 24-1/2 6 3-1/4 3.2500 15-1/2 25-1/2 6 3-5/16 3.3125 15-1/2 25-1/2 6 3-3/8 3.3750 15-1/2 25-1/2 6 3-7/16 3.4375 15-1/2 25-1/2 6 3-1/2 3.5000 16-3/8 26-1/2 6 3-5/8 3.6250 16-3/8 26-1/2 6 3-3/4 3.7500 16-3/8 26-1/2 6 3-7/8 3.8750 16-3/8 26-1/2 6 4 4.0000 17-1/2 27-1/2 6 Many sizes heavy-duty taper shank and chipbreaker type taper shanks available please inquire. Size A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Dec. Equiv. .2340 .2380 .2420 .2460 .2500 .2570 .2610 .2660 .2720 .2770 .2810 .2900 .2950 .3020 .3160 .3230 .3320 .3390 .3480 .3580 .3680 .3770 .3860 .3970 .4040 .4130 Flute Length 2-7/8 2-7/8 2-7/8 2-7/8 2-7/8 3 3 3 3 3 3 3-1/8 3-1/8 3-1/8 3-1/4 3-1/4 3-1/4 3-1/4 3-1/2 3-1/2 3-1/2 3-5/8 3-5/8 3-5/8 3-5/8 3-7/8 Overall Length 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/4 6-1/4 6-1/4 6-1/4 6-1/4 6-1/4 6-3/8 6-3/8 6-3/8 6-1/2 6-1/2 6-1/2 6-1/2 6-3/4 6-3/4 6-3/4 7 7 7 7 7-1/4 • List No. 204 WIrE GAUGE SIzES Furnished with #1 Morse Taper Shank. Flute length and overall length are approximately the same as corresponding fractional. Size 1 2 3 4 5 6 7 8 9 10 11 12 Dec. Equiv. .2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 • List No. 200M MILLIMETEr SIzES Size 13 14 15 16 17 18 19 20 21 22 23 24 Dec. Equiv. .1850 .1820 .1800 .1770 .1730 .1695 .1660 .1610 .1590 .1570 .1540 .1520 Flute length and overall length are approximately the same as corresponding fractional. Size 3.00 3.20 3.50 3.80 4.00 4.20 4.50 4.80 5.00 5.20 5.50 5.80 6.00 6.20 6.50 6.80 7.00 7.20 7.50 7.80 8.00 8.20 8.50 8.80 9.00 9.20 9.50 9.80 10.00 10.20 10.50 10.80 11.00 11.20 11.50 11.80 12.00 12.20 12.50 12.80 13.00 13.20 13.50 13.80 14.00 14.25 14.50 14.75 15.00 15.25 15.50 15.75 16.00 16.25 16.50 16.75 17.00 17.25 17.50 18.00 Dec. Equiv. .1181 .1260 .1378 .1496 .1575 .1654 .1772 .1890 .1969 .2047 .2165 .2283 .2362 .2441 .2559 .2677 .2756 .2835 .2953 .3071 .3150 .3228 .3346 .3465 .3543 .3622 .3740 .3858 .3937 .4016 .4134 .4252 .4331 .4409 .4528 .4646 .4724 .4803 .4921 .5039 .5118 .5197 .5315 .5433 .5512 .5610 .5709 .5807 .5906 .6004 .6102 .6201 .6299 .6398 .6496 .6594 .6693 .6791 .6890 .7087 WWW.HANESSUPPLY.COM Morse Taper No. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Size 18.50 19.00 19.50 20.00 20.50 21.00 21.50 22.00 22.50 23.00 23.50 24.00 24.50 25.00 25.50 26.00 26.50 27.00 27.50 28.00 28.50 29.00 29.50 30.00 30.50 31.00 31.50 32.00 32.50 33.00 33.50 34.00 34.50 35.00 35.50 36.00 36.50 37.00 37.50 38.00 39.00 40.00 41.00 42.00 43.00 44.00 45.00 46.00 47.00 48.00 49.00 50.00 51.00 57.00 59.00 65.00 66.00 69.00 70.00 72.00 Size 25 26 27 28 29 30 31 37 39 40 44 47 Dec. Equiv. .7283 .7480 .7677 .7874 .8071 .8268 .8465 .8661 .8858 .9055 .9252 .9449 .9646 .9843 1.0039 1.0236 1.0433 1.0630 1.0827 1.1024 1.1220 1.1417 1.1614 1.1811 1.2008 1.2205 1.2402 1.2598 1.2795 1.2992 1.3189 1.3386 1.3583 1.3780 1.3976 1.4173 1.4370 1.4567 1.4764 1.4961 1.5354 1.5748 1.6142 1.6535 1.6929 1.7323 1.7717 1.8110 1.8504 1.8898 1.9291 1.9685 2.0079 2.2441 2.3228 2.5591 2.5984 2.7165 2.7559 2.8346 Dec. Equiv. .1495 .1470 .1440 .1405 .1360 .1285 .1200 .1040 .0995 .0980 .0860 .0785 Morse Taper No. 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Michigan Drill Machine Tool Accessories Body Drills (Continued) Morse Taper Sleeves Available with Hardened Tang or Hardened and Ground Throughout. Morse Taper Extension Sockets Sleeve and Sockets Morse Taper No. Size 1 to 1 1 to 2 1 to 3 1 to 4 1 to 5 2 to 1 2 to 2 2 to 3 2 to 4 2 to 5 3 to 1 3 to 2 3 to 3 3 to 4 3 to 5 4 to 2 4 to 3 4 to 4 4 to 5 4 to 6 5 to 3 5 to 4 5 to 5 5 to 6 Internal 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 4 4 4 4 4 5 5 5 5 External 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 2 3 4 5 6 3 4 5 6 Morse Taper Sleeves Overall Hard Tang Hard & Lgth Only Ground (in) Tool No. Tool No. – – – 3-9/16 TS12 TSH12 3-15/16 TS13 TSH13 4-7/8 TS14 TSH14 6-1/8 TS15 TSH15 – – – – – – 4-7/16 TS23 TSH23 4-7/8 TS24 TSH24 6-1/8 TS25 TSH25 – – – – – – – – – 5-3/8 TS34 TSH34 6-1/8 TS35 TSH35 – – – – – – – – – 6-5/8 TS45 TSH45 8-5/8 TS46 TSH46 – – – – – – – – – 8-5/8 TS56 TSH56 Drill Drifts or Center keys Morse Taper Extension Socket Overall Lgth (in) Tool No. 6-1/4 ES11 6-1/4 ES12 6-7/8 ES13 7-1/2 ES14 9-1/16 ES15 6-1/4 ES21 6-7/8 ES22 7-5/8 ES23 8-1/2 ES24 9-3/4 ES25 7-1/4 ES31 7-3/4 ES32 8-1/2 ES33 9-1/2 ES34 10-1/2 ES35 8-1/2 ES42 9-1/2 ES43 10-1/2 ES44 11-7/8 ES45 14 ES46 10-1/2 ES53 11-3/8 ES54 13-3/4 ES55 15-3/8 ES56 Drop Forged and Hardened Drill Drifts Size 1 2 3 4 For Use with Taper No. 1 2 3 4, 5, 6 Tool No. DD1 DD2 DD3 DD4 Hardened and Ground Throughout - For adapting tools with Morse taper shanks to machines with straight holes. Solid Sockets Size 1 2 3 4 5 6 7 8 9 Inside Morse Outside Taper No. Dia. 1 1 1 1-1/4 1 1-1/2 2 1 2 1-1/4 2 1-1/2 2 1-3/4 2 2 3 1-1/4 body Drills Tool No. SS11 SS21 SS31 SS42 SS52 SS62 SS72 SS82 SS93 HIGH SPEED STEEL Size 10 11 12 13 14 15 16 17 18 Inside Morse Outside Taper No. Dia. 3 1-1/2 3 1-3/4 3 2 4 1-1/2 4 1-3/4 4 2 5 2-1/4 5 2-1/2 6 3-1/4 Tool No. SS103 SS113 SS123 SS134 SS144 SS154 SS165 SS175 SS185 Body Drills are intended primarily for use in hand held, air or electric drill motors, in sheet metal, thin wall tubing or any other shallow hole drilling. Because of their short flute design and heavy web construction, they are considerably more rigid and durable than Jobber or Screw Machine Lengths. Breakage is significantly reduced or eliminated and tool life is greatly increased. – continues – • List No. 650F Style F – Fishtail point is used in hand drilling thin material or machine drilling where the ratio of hole size to material thickness is very large, and where burr free holes are desired. A guide bushing must be used to center the drill point. Double End Dec. Equiv. .0860 .1065 .1094 .1160 .1200 .1250 .1285 .1360 .1405 .1406 Size Dec. Equiv. 18 .1695 .1820 14 13 .1850 3/16 .1875 8 .1990 13/64 .2031 .2188 7/32 15/64 .2344 .2500 1/4 .2570 F Size 1/16 50 5/64 3/32 7/64 31 1/8 30 Size 27 26 25 24 23 5/32 22 21 20 Dec. Equiv. .1440 .1470 .1495 .1520 .1540 .1562 .1570 .1590 .1610 Size Dec. Equiv. 17/64 .2656 9/32 .2812 5/16 .3125 .3438 11/32 3/8 .3750 13/32 .4062 27/64 .4219 7/16 .4375 .5000 1/2 HIGH SPEED STEEL & COBALT 135° Split Point This drill is recommended for all sheet metal drilling applications. The short overall length and short flute length provide rigidity and reduce breakage. • List No. 655S – High Speed Steel • List No. 655SC – Cobalt Steel • List No. 655T – Titanium Nitride coated Dec. Equiv. .0625 .0700 .0781 .0938 .1094 .1200 .1250 .1285 Sheeters Drills Solid Sockets with Morse Taper Holes Size 44 36 7/64 32 31 1/8 30 29 28 9/64 Size 9/64 27 26 25 5/32 21 11/64 Dec. Equiv. Size 3/16 7 7/32 1/4 17/64 9/32 19/64 5/16 .1406 .1440 .1470 .1495 .1562 .1590 .1719 Dec. Equiv. .1875 .2010 .2188 .2500 .2656 .2812 .2969 .3125 HIGH SPEED STEEL 135° Long Sweep Split Point These drills are commonly used in drilling automotive and truck bodies, metal building and other sheet metal applications. The 135° long sweep split point insures easy centering while the short overall length reduces breakage in hand held drilling operations. • List No. 670S Size Overall Lgth (in) 5/32 4-1/2 10 4-1/8 8 1-3/8 8 3-5/8 8 4-1/2 7/32 6 1 2-1/4 1 3 Size Overall Lgth (in) 1 3-5/8 1 3-7/8 1 4-1/2 1 6 1 7-1/4 .231 3 .231 4-1/2 Combined Drills and Countersinks HIGH SPEED STEEL, COBALT, SOLID CARBIDE & CARBIDE TIPPED Plain Type - 60° Countersink Angle • List No. 585 – High Speed Steel • List No. 585C – Cobalt • List No. 585SC – Solid carbide Size 1 2 3 4 5 Body Dia. 1/8 3/16 1/4 5/16 7/16 Drill Dia. Overall & Lgth. Lgth. 3/64 1-1/4 5/64 1-7/8 7/64 2 1/8 2-1/8 3/16 2-3/4 Size 6 7 8 9 10 – Combined Drills and Countersinks Continue – WWW.HANESSUPPLY.COM Body Dia. 1/2 5/8 3/4 7/8 1 Drill Dia. Overall & Lgth. Lgth. 7/32 3 1/4 3-1/4 5/16 3-1/2 11/32 3-5/8 3/8 3-3/4 22 - 31 22 Cutting Tools With Hardened Tang • List No. 650S Style S – 135° split point is used in hand or machine drilling without guide bushings, and where burring is not a problem. This point centers quickly and may be used successfully in tougher, harder materials. Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Michigan Drill Combined Drills and Countersinks (continued) Countersink and Deburring Tool Pilotless Types (continued) bell Type - 60° Countersink Angle • List No. 587 – High Speed Steel • List No. 587C – Cobalt Size 11 12 13 14 15 Body Drill Dia. Dia. & Lgth. 1/8 3/64 3/16 1/16 1/4 3/32 5/16 7/64 7/16 5/32 Long Series Overall Lgth. 1-1/4 1-7/8 2 2-1/8 2-3/4 Bell Dia. .1000 .1500 .2000 .2500 .3500 Size 16 17 18 19 20 • List No. 589 – High Speed Steel Size 1 1 1 1 2 2 2 3 3 3 4 4 Body Dia. 1/8 1/8 1/8 1/8 3/16 3/16 3/16 1/4 1/4 1/4 5/16 5/16 Metric Series Drill Dia. Overall & Lgth. Lgth. 3/64 3 3/64 4 3/64 5 3/64 6 5/64 4 5/64 5 5/64 6 7/64 4 7/64 5 7/64 6 1/8 4 1/8 5 • List No. 585M – High Speed Steel Plain Type – 60° Countersink Angle Size .50* .80* 1.00 1.25 1.60 2.00 Body Dia. .0197 .0315 .0394 .0492 .0630 .0787 Drill Dia. Overall & Lgth. Lgth. 1/8 13/16 1/8 13/16 1/8 1-1/4 1/8 1-1/4 5/32 1-5/16 .1969 1-9/16 Body Drill Dia. Dia. & Lgth. 1/2 3/16 5/8 7/32 3/4 1/4 7/8 5/16 1 3/8 Size 4 4-1/2 4-1/2 4-1/2 5 5 5 6 6 7 8 Body Dia. 5/16 3/8 3/8 3/8 7/16 7/16 7/16 1/2 1/2 5/8 3/4 Body Size Dia. 2.50 .0984 3.15 .1240 4.00 .1575 5.00 .1969 6.30 .2480 8.00 .3150 *Single Ended Countersink and Deburring Tool Piloted and Pilotless Types Overall Lgth. 3 3-1/4 3-1/2 3-5/8 3-3/4 Bell Dia. .4000 .5000 .6000 .7000 .8000 Drill Dia. Overall & Lgth. Lgth. 1/8 6 9/64 4 9/64 5 9/64 6 3/16 4 3/16 5 3/16 6 7/32 5 7/32 6 1/4 6 5/16 6 Drill Dia. Overall & Lgth. Lgth. 1/4 1-3/4 .3150 2 .3937 2-1/4 .4921 2-1/2 .6299 2-3/4 .7874 3-1/8 HIGH SPEED STEEL The action of a single cutting edge provides faster stock removal and prevents chatter. These tools are recommended for deburring steel and other ferrous materials. They can easily be resharpened by using the Weldon Axial Relieving Fixture or by using a small mounted grinding wheel and inserting it in the hole. Single Tools - Piloted Type Screw Size Size 11 1/4 12 1/4 13 5/16 14 5/16 15 3/8 16 3/8 17 7/16 18 7/16 19 1/2 20 1/2 *Pilot Diameter List No. 544P – 82° Range of Hole Diameter Which Can Be Cut Smallest Dia.* to Largest Dia. 1/4 33/64 17/64 33/64 5/16 41/64 21/64 41/64 3/8 49/64 25/64 49/64 7/16 53/64 29/64 53/64 1/2 15/16 33/64 15/16 Pilot Lgth. 5/32 5/32 5/32 5/32 5/32 5/32 7/32 7/32 1/4 1/4 Single Tools - Pilotless Type Size Single or Double End 0 1 2 3 3A 4 Double End Single End Single End Single End Single End Single End – continues – 22 - 32 Range of Hole Diameter Which Can Be Cut Smallest Dia.* to Largest Dia. List No. 543 – 60° 1/8 15/64 3/16 13/32 5/16 17/32 7/16 25/32 7/16 25/32 11/16 1-3/32 Shank Dia. 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 Shank Dia. 1/4 1/4 1/4 1/2 1/4 1/2 Size 0 1 2 3 3A 3B 4 5 6 7 8 0 1 2 3 3A 4 0 1 2 3 4 Range of Hole Diameter Which Can Be Cut Smallest Dia.* to Largest Dia. List No. 544 – 82° Double Ended 1/16 15/64 Single Ended 5/32 13/32 Single Ended 3/16 17/32 Single Ended 5/16 25/32 Single Ended 5/16 25/32 Single Ended 7/16 7/8 Single Ended 9/16 1-1/16 Single Ended 5/8 1-15/32 Single Ended 3/4 1-3/4 Single Ended 1 2 Single Ended 1-1/4 2-1/2 List No. 546 – 90° Double Ended 1/16 15/64 Single Ended 5/32 13/32 Single Ended 3/16 17/32 Single Ended 5/16 25/32 Single Ended 5/16 25/32 Single Ended 9/16 1-1/16 List No. 547 – 100° Double Ended 1/16 15/64 Single Ended 5/32 13/32 Single Ended 3/16 17/32 Single Ended 5/16 25/32 Single Ended 9/16 1-1/16 Single or Double End Single Flute Countersinks Shank Dia. 1/4 1/4 1/4 1/2 1/4 1/2 1/2 1/2 5/8 5/8 3/4 1/4 1/4 1/4 1/2 1/4 1/2 1/4 1/4 1/4 1/2 1/2 HIGH SPEED STEEL For use in chamfering, deburring, countersinking and enlarging holes in sheet metal while providing a smooth surface finish. Will countersink holes much smaller than other styles and should operate at comparatively high speeds. • List No 490 – 60° Point Angle • List No 491 – 82° Point Angle • List No 492 – 90° Point Angle • List No 493 – 100° Point Angle Size (in) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2 Single Tools Shank Dia. (in) 1/8 3/16 1/4 1/4 1/4 1/4 3/8 1/2 1/2 1/2 1/2 3/4 3/4 Overall Lgth (in) 1-1/4 1-1/2 1-1/2 1-5/8 1-3/4 2 2-1/4 2-5/8 2-3/4 2-3/4 2-3/4 2-7/8 3-1/4 Three-Flute Center reamer Sets 5-Piece Sets Contains 1 piece of each: 1/4, 3/8, 1/2, 5/8, 3/4 60° – Set No. 490S 82° – Set No. 491S 90° – Set No. 492S 100° – Set No. 493S Supplied in Wood Block. HIGH SPEED STEEL Engineered to give chatter-free performance. They are comparatively free-cutting and should be operated at low speeds. • List No 480 – 60° Point Angle • List No 481 – 82° Point Angle • List No 482 – 90° Point Angle • List No 483*– 100° Point Angle • List No. 484* –120° Point Angle Single Tools Size Shank Dia. (in) (in) 1/4 3/16 3/8 1/4 1/2 3/8 5/8 3/8 3/4 1/2 1 1/2 1-1/4 1/2 1-1/2 3/4 2 3/4 *1/4–1" ONLY WWW.HANESSUPPLY.COM Overall Lgth (in) 1-1/2 1-3/4 2 2-1/4 2-5/8 2-3/4 3 3 3-1/4 Sets 5-Piece Sets Contains 1 piece of each: 1/4, 3/8, 1/2, 5/8, 3/4 60° – Set No. 480S 82° – Set No. 481S 90° – Set No. 482S 100° – Set No. 483S Supplied in Wood Block. Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Four Flute Machine Countersinks Michigan Drill HIGH SPEED STEEL • List No. 486 – 60° Point Angle • List No. 487 – 82° Point Angle Single Tools Shank Dia. (in) 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Overall Lgth (in) 3-7/8 4 4-1/8 4-1/4 4-1/4 4-3/8 4-1/2 Six Flute Chatterless Countersinks HIGH SPEED STEEL Designed for fast shearing cut. • List No 495 – 60° Point Angle • List No 496 – 82° Point Angle • List No 497 – 90° Point Angle Size (in) 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 1-3/4 2 Single Tools Shank Dia. (in) 1/4 1/4 1/4 1/4 1/2 1/2 1/2 1/2 3/4 3/4 1 1 Sets Overall Lgth (in) 2 2 2 2 2-3/4 2-3/4 2-3/4 2-3/4 3-3/8 3-1/2 4-1/4 4-3/8 Carbide Tipped Drills Jobber Length – 118° 5-Piece Sets Contains 1 piece of each: 1/4, 3/8, 1/2, 5/8, 3/4 60° – Set No. 495S 82° – Set No. 496S 90° – Set No. 497S Supplied in Wood Block. HIGH SPEED STEEL BODIES These Carbide Tipped Drills are designed for drilling abrasive and nonferrous materials such as castings, hard rubber and copper alloys. They are NOT recommended for drilling steel or other ferrous materials. • List No. CT830 • Set No. CT830SF – 25 Piece Set 1/8 - 1/2 x 64ths in Metal Case FrACTIONAL SIzES Size 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 Dec. Equiv. .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2656 .2812 .2969 .3125 .3281 .3438 .3594 .3750 .3906 .4062 Flute Overall Length Length 1-5/8 2-3/4 1-3/4 2-7/8 2 3-1/8 2-1/8 3-1/4 2-5/16 3-1/2 2-7/16 3-5/8 2-1/2 3-3/4 2-5/8 3-7/8 2-3/4 4 2-7/8 4-1/8 2-15/16 4-1/4 3-1/16 4-3/8 3-3/16 4-1/2 3-5/16 4-5/8 3-7/16 4-3/4 3-1/2 4-7/8 3-5/8 5 3-3/4 5-1/8 3-7/8 5-1/4 – Carbide Tipped Drills Continue – Size 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 Dec. Equiv. .4219 .4375 .4531 .4688 .4844 .5000 .5156 .5312 .5469 .5625 .5781 .5938 .6094 .6250 .6406 .6562 .6719 .6875 Flute Overall Length Length 3-15/16 5-3/8 4-1/16 5-1/2 4-3/16 5-5/8 4-5/16 5-3/4 4-3/8 5-7/8 4-1/2 6 4-13/16 6-5/8 4-13/16 6-5/8 4-13/16 6-5/8 4-13/16 6-5/8 4-13/16 6-5/8 5-3/16 7-1/8 5-3/16 7-1/8 5-3/16 7-1/8 5-3/16 7-1/8 5-3/16 7-1/8 5-5/8 7-5/8 5-5/8 7-5/8 Size A B C D E F G H I J K L M Dec. Equiv. .2340 .2380 .2420 .2460 .2500 .2570 .2610 .2660 .2720 .2770 .2810 .2900 .2950 Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Dec. Equiv. .2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 .1850 .1820 .1800 .1770 Flute Overall Length Length 2-5/8 3-7/8 2-3/4 4 2-3/4 4 2-3/4 4 2-3/4 4 2-7/8 4-1/8 2-7/8 4-1/8 2-7/8 4-1/8 2-7/8 4-1/8 2-7/8 4-1/8 2-15/16 4-1/4 2-15/16 4-1/4 3-1/16 4-3/8 WIrE GAUGE SIzES Flute Length 2-5/8 2-5/8 2-1/2 2-1/2 2-1/2 2-1/2 2-7/16 2-7/16 2-7/16 2-7/16 2-5/16 2-5/16 2-5/16 2-3/16 2-3/16 2-3/16 Overall Length 3-7/8 3-7/8 3-3/4 3-3/4 3-3/4 3-3/4 3-5/8 3-5/8 3-5/8 3-5/8 3-1/2 3-1/2 3-1/2 3-3/8 3-3/8 3-3/8 Carbide Tipped Drills Size N O P Q R S T U V W X Y Z Dec. Equiv. .3020 .3160 .3230 .3320 .3390 .3480 .3580 .3680 .3770 .3860 .3970 .4040 .4130 Flute Length 3-1/16 3-3/16 3-5/16 3-7/16 3-7/16 3-1/2 3-1/2 3-5/8 3-5/8 3-3/4 3-3/4 3-7/8 3-7/8 Overall Length 4-3/8 4-1/2 4-5/8 4-3/4 4-3/4 4-7/8 4-7/8 5 5 5-1/8 5-1/8 5-1/4 5-1/4 Size 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Dec. Equiv. .1730 .1695 .1660 .1610 .1590 .1570 .1540 .1520 .1495 .1470 .1440 .1405 .1360 .1285 .1200 .1160 Flute Length 2-3/16 2-1/8 2-1/8 2-1/8 2-1/8 2 2 2 1-7/8 1-7/8 1-7/8 1-3/4 1-3/4 1-5/8 1-5/8 1-5/8 Overall Length 3-3/8 3-1/4 3-1/4 3-1/4 3-1/4 3-1/8 3-1/8 3-1/8 3 3 3 2-7/8 2-7/8 2-3/4 2-3/4 2-3/4 HIGH SPEED STEEL BODIES • List No. CT840 – Tapered Length 118° Point Size 1/8 9/64 5/32 11/64 3/16 5.00 13/64 7/32 15/64 "C" 6.30 1/4 "F" 17/64 9/32 19/64 5/16 "O" 21/64 11/32 23/64 9.40 3/8 25/64 13/32 27/64 7/16 29/64 15/32 12.00 31/64 1/2 33/64 Flute Length 2-3/4 3 3 3-3/8 3-3/8 3-1/2 3-5/8 3-5/8 3-3/4 3-1/2 3-1/2 3-3/4 3-1/2 3-7/8 3-7/8 4 4 3-1/2 4-1/8 4-1/8 4-1/4 4 4-1/4 4-3/8 4-3/8 4-5/8 4-5/8 4-3/4 4-3/4 5-1/2 4-3/4 4-3/4 4-3/4 Overall Length 5-1/8 5-3/8 5-3/8 5-3/4 5-3/4 6-1/4 6 6 6-1/8 6-1/4 6-1/4 6-1/8 6-1/4 6-1/4 6-1/4 6-3/8 6-3/8 6-1/4 6-1/2 6-1/2 6-3/4 7 6-3/4 7 7 7-1/4 7-1/4 7-1/2 7-1/2 7-1/4 7-3/4 7-3/4 8 Size 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1 Flute Length 4-3/4 4-7/8 4-7/8 4-7/8 4-7/8 4-7/8 4-7/8 5-1/8 5-1/8 5-3/8 5-3/8 5-5/8 5-5/8 5-7/8 5-7/8 6 6 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-3/8 6-3/8 6-3/8 6-3/8 Overall Length 8 8-1/4 8-1/4 8-1/4 8-3/4 8-3/4 8-3/4 8-3/4 9 9 9-1/4 9-1/4 9-1/2 9-1/2 9-3/4 9-3/4 9-7/8 9-7/8 10 10 10 10 10 10 10 10-3/4 10-3/4 11 11 11 11 – Carbide Tipped Drills Continue – WWW.HANESSUPPLY.COM 22 - 33 22 Cutting Tools Size (in) 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 Carbide Tipped Drills (continued) LETTEr SIzES Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Michigan Drill Chucking reamers Carbide Tipped Drills (continued) • List No. CT820 – Tapered Shank, 118° Point Size 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 Flute Length 2-7/8 3 3 3-1/8 3-1/8 3-1/4 3-1/4 3-1/2 3-1/2 3-5/8 3-5/8 3-7/8 3-7/8 4-1/8 4-1/8 4-3/8 4-3/8 4-5/8 4-5/8 4-7/8 4-7/8 4-7/8 4-7/8 4-7/8 4-7/8 5-1/8 5-1/8 5-3/8 5-3/8 Overall Morse Length Taper No. 6-1/8 1 6-1/4 1 6-1/4 1 6-3/8 1 6-3/8 1 6-1/2 1 6-1/2 1 6-3/4 1 6-3/4 1 7 1 7 1 7-1/4 1 7-1/4 1 7-1/2 1 7-1/2 1 8-1/4 2 8-1/4 2 8-1/2 2 8-1/2 2 8-3/4 2 8-3/4 2 8-3/4 2 8-3/4 2 8-3/4 2 8-3/4 2 9 2 9 2 9-1/4 2 9-1/4 2 Size 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1 1-1/32 1-1/16 1-3/32 1-1/8 1-5/32 1-3/16 1-7/32 1-1/4 Straight Shank Flute Length 5-5/8 5-5/8 5-7/8 5-7/8 6 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-1/8 6-3/8 6-3/8 6-3/8 6-3/8 6-1/2 6-5/8 6-7/8 7-1/8 7-1/4 7-3/8 7-1/2 7-7/8 Overall Morse Length Taper No. 9-1/2 2 9-1/2 2 9-3/4 2 9-3/4 2 9-7/8 2 9-7/8 2 10-3/4 3 10-3/4 3 10-3/4 3 10-3/4 3 10-3/4 3 10-3/4 3 10-3/4 3 10-3/4 3 10-3/4 3 10-3/4 3 11 3 11 3 11 3 11 3 11-1/8 3 11-1/4 4 12-1/2 4 12-3/4 4 12-7/8 4 13 4 13-1/8 4 13-1/2 4 Carbide Tipped Drills These drills can also be used effectively in many drilling applications using bakelite composites and other similar non-metallic material. • List No. CT810 – Silver & Deming Bowling Ball – 1/2" Straight Shank 3-7/8" Flute, 6-1/4" Overall • List No. CT811 – Taper Shank Bowling Ball – 2 Morse Taper Shank 4-1/8" Flute, 7-1/2" Overall • Set No. CT810S/Straight Shank – Set No. CT811S/Taper Shank – 17 Piece Set. Contains 1 Piece each: 5/8" to 1-1/8" by 32nds. Supplied in wood block. • Set No. CT810L/Straight Shank – Set No. CT811L/Taper Shank – 23 Piece Set. Contains 1 Piece Each: 7/16" to 1-1/8" by 32nds also 61/64, 63/64 and 1-1/64. supplies in wood block. Size 7/16 1/2 9/16 5/8 21/32 11/16 23/32 3/4 25/32 22 - 34 Dec. Equiv. .4375 .5000 .5625 .6250 .6562 .6875 .7188 .7500 .7812 Size 13/16 27/32 7/8 29/32 15/16 61/64 31/32 63/64 1 Dec. Equiv. .8125 .8438 .8750 .9062 .9375 .9531 .9688 .9844 1.0000 Size Dec. Equiv. 1-1/64 1.0156 1-1/32 1.0312 1-1/16 1.0625 1-3/32 1.0938 1-1/8 1.1250 1-1/4 1.2500 Other sizes available. Please inquire. HIGH SPEED STEEL • List No. 550 – Straight Flute • List No. 551 – Spiral Flute FrACTIONAL SIzES Size 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 Dec. Equiv. .0469 .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2656 .2812 .2969 .3125 .3281 .3438 .3594 .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 .5156 .5312 .5469 .5625 .5781 .5938 .6094 .6250 .6406 Flute Overall Lgth.(in) Lgth.(in) 1/2 2-1/2 1/2 2-1/2 3/4 3 3/4 3 7/8 3-1/2 7/8 3-1/2 1 4 1 4 1-1/8 4-1/2 1-1/8 4-1/2 1-1/4 5 1-1/4 5 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-3/4 7 1-3/4 7 1-3/4 7 1-3/4 7 1-3/4 7 1-3/4 7 1-3/4 7 1-3/4 7 2 8 2 8 2 8 2 8 2 8 2 8 2 8 2 8 2-1/4 9 2-1/4 9 2-1/4 9 Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Dec. Equiv. .2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 .1850 .1820 .1800 .1770 .1730 .1695 .1660 .1610 .1590 .1570 .1540 .1520 .1495 .1470 .1440 .1405 .1360 .1285 .1200 Flute Overall Lgth.(in) Lgth.(in) 1-1/2 6 1-1/2 6 1-1/4 5 1-1/4 5 1-1/4 5 1-1/4 5 1-1/4 5 1-1/4 5 1-1/4 5 1-1/4 5 1-1/4 5 1-1/8 4-1/2 1-1/8 4-1/2 1-1/8 4-1/2 1-1/8 4-1/2 1-1/8 4-1/2 1-1/8 4-1/2 1-1/8 4-1/2 1-1/8 4-1/2 1-1/8 4-1/2 1-1/8 4-1/2 1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 7/8 3-1/2 7/8 3-1/2 • List No. 550 – Straight Flute WIrE GAUGE SIzES – Chucking Reamers Continue – WWW.HANESSUPPLY.COM Size 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1 1-1/32 1-1/16 1-3/32 1-1/8 1-5/32 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-3/4 1-7/8 2 Dec. Equiv. .6562 .6719 .6875 .7031 .7188 .7344 .7500 .7656 .7812 .7969 .8125 .8281 .8438 .8594 .8750 .8906 .9062 .9219 .9375 .9531 .9688 .9844 1.0000 1.0313 1.0625 1.0938 1.1250 1.1562 1.1875 1.2500 1.3125 1.3750 1.4375 1.5000 1.5625 1.6250 1.7500 1.8750 1.5000 Flute Overall Lgth.(in) Lgth.(in) 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8 2-3/4 2-3/4 2-3/4 2-3/4 2-7/8 2-7/8 2-7/8 2-7/8 3 3 3-1/4 3-1/4 3-1/2 3-1/2 3-5/8 4 4 4 9 9 9 9 9 9-1/2 9-1/2 9-1/2 9-1/2 9-1/2 9-1/2 9-1/2 9-1/2 10 10 10 10 10 10 10 10 10-1/2 10-1/2 10-1/2 10-1/2 11 11 11 11 11-1/2 11-1/2 12 12 12-1/2 12-1/2 13 13-1/2 14 14 Dec. Flute Overall Size Equiv. Lgth.(in) Lgth.(in) 32 .1160 7/8 3-1/2 33 .1130 7/8 3-1/2 34 .1110 7/8 3-1/2 35 .1100 7/8 3-1/2 36 .1065 7/8 3-1/2 37 .1040 7/8 3-1/2 38 .1015 7/8 3-1/2 39 .0995 7/8 3-1/2 40 .0980 7/8 3-1/2 41 .0960 7/8 3-1/2 42 .0935 3/4 3 43 .0890 3/4 3 44 .0860 3/4 3 45 .0820 3/4 3 46 .0810 3/4 3 47 .0785 3/4 3 48 .0760 3/4 3 49 .0730 3/4 3 50 .0700 3/4 3 51 .0670 3/4 3 52 .0635 1/2 2-1/2 53 .0595 1/2 2-1/2 54 .0550 1/2 2-1/2 55 .0520 1/2 2-1/2 56 .0465 1/2 2-1/2 57 .0430 1/2 2-1/2 58 .0420 1/2 2-1/2 59 .0410 1/2 2-1/2 60 .0400 1/2 2-1/2 Many Cobalt Wire Gauge Chucking Reamers available from stock. Please inquire. Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Michigan Drill Car reamers Chucking Reamers (continued) • List No. 550 – Straight Flute LETTEr SIzES Dec. Equiv. .2340 .2380 .2420 .2460 .2500 .2570 .2610 .2660 .2720 .2770 .2810 .2900 .2950 Flute Overall Lgth.(in) Lgth.(in) 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 Hand reamers Size N O P Q R S T U V W X Y Z Dec. Equiv. .3020 .3160 .3230 .3320 .3390 .3480 .3580 .3680 .3770 .3860 .3970 .4040 .4130 Flute Overall Lgth.(in) Lgth.(in) 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-1/2 6 1-3/4 7 1-3/4 7 1-3/4 7 1-3/4 7 1-3/4 7 1-3/4 7 1-3/4 7 1-3/4 7 HIGH SPEED STEEL • List No. 564 – Straight Flute • List No. 565 – Spiral Flute Size (in) 1/8 9/64 5/32 11/64 3/16 7/32 15/64 1/4 9/32 19/64 5/16 11/32 23/64 3/8 Size (in) Size (in) Size (in) 11/16 1-1/8 13/32 45/64 1-3/16 7/16 1-1/4 23/32 29/64 3/4 1-5/16 15/32 51/64 1-3/8 31/64 1-7/16 13/16 1/2 27/32 1-1/2 17/32 7/8 1-11/16 9/16 1-3/4 57/64 37/64 29/32 1-13/16 19/32 59/64 1-7/8 39/64 1-15/16 15/16 5/8 1 2 21/32 1-1/16 2-1/2 43/64 Note: 2" & 3" Hand Reamers also available in carbon steel at substantially reduced prices. bridge reamers Taper Shank - Long body Bridge reamers are designed to ream off-size, mis-sharpened or misaligned holes in structural iron or steel. They are popular in the bridge erection and ship construction industries and in other similar applications. • List No. 532 – Type “D” Spiral Flute • List No. 533 – Type “C” Straight Flute Size Approx. No. of Flute Overall Morse (in) Point Size (in) Flutes Lgth.(in) Lgth.(in) Taper No. 11/32 5/32 4 4 7-1/4 2 7/16 1/4 5 4-3/8 8-1/4 2 15/32 1/4 5 5-1/8 9 2 1/2 9/32 5 5-1/8 9 2 9/16 11/32 5 5-1/8 9 2 5/8 3/8 5 6-1/8 10 2 11/16 25/64 5 7-1/8 11-3/4 3 3/4 7/16 5 7-3/8 12 3 13/16 1/2 5 7-3/8 12 3 7/8 9/16 5 7-3/8 12 3 15/16 5/8 5 7-3/8 12 3 1 11/16 5 7-3/8 12 3 1-1/16 3/4 5 7-3/8 12 3 1-1/8 13/16 5 7-3/8 12 3 1-3/16 7/8 5 7-3/8 12 3 1-1/4 15/16 5 7-3/8 13 4 1-5/16 1 5 7-3/8 13 4 1-3/8 1-1/8 5 7-3/8 13 4 1-7/16 1-3/16 5 7-3/8 13 4 1-1/2 1-1/4 5 7-3/8 13 4 1-5/8 1-3/8 5 7-3/8 13 4 2 1-11/16 6 7-3/8 13 5 Additional sizes available from stock. Please inquire. Car reamers are primarily used for enlarging, aligning and deburring holes. They are often used in building and repairing railroad cars. Their short flute and overall lengths permit use in cramped quarters. • List No. 534 – Type “C” Straight Flute • List No. 535 – Type “D” Spiral Flute Size (in) 5/16 3/8 11/32 7/16 15/32 1/2 9/16 5/8 11/16 3/4 13/16 15/16 1 Approx. Point Size (in) 11/64 15/64 15/64 1/4 9/32 19/64 9/32 5/16 3/8 13/32 15/32 19/32 27/32 No. of Flutes 4 4 4 5 5 5 5 5 5 5 5 5 5 Flute Lgth.(in) 2-3/4 2-3/4 2-3/4 3-1/2 3-1/2 4 4 4-1/2 4-1/2 5 5 5 5 Overall Morse Lgth.(in) Taper No. 5-11/16 1 5-11/16 1 5-11/16 1 6-15/16 2 7-1/16 2 7-9/16 2 7-9/16 2 8-1/16 2 8-13/16 3 9-1/2 3 9-1/2 3 9-1/2 3 9-1/2 3 534 Straight Shank Aligning reamers 535 HIGH SPEED STEEL With 3-Equal-Flat Shanks Used in the same applications as car reamers, straight shank aligning reamers are supplied with 3-equals-flats to fit 1/2" chucks. They are also useful in portable reaming. • List No. 535r – Spiral Flute • Set No. 535rS/Straight Shank Aligning reamers – 4 Piece Set; Contains 1 piece of each: 1/2, 9/16, 5/8, 3/4. Supplied in wood block. Size (in) 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 Flute Lgth. (in) 2-3/4 2-3/4 3-1/2 4 4 4-1/2 4-1/2 5 5 5 5 5 5 Hand Taps Standard Overall Lgth. (in) 4-5/8 4-5/8 5-3/8 5-7/8 5-7/8 6-3/8 6-3/8 6-7/8 6-7/8 6-7/8 6-7/8 6-7/8 6-7/8 Shank Size (in) 5/16 3/8 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Shank Lgth. (in) 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 HIGH SPEED STEEL • List No. 770 – High Speed Steel, Ground Thread • List No. 770T – Titanium Nitride Coated, Ground Thread • List No. 770 SET – 3 Piece Sets, Plug, Bottoming & Taper Chamfer FrACTIONAL SIzES 532 533 Size (in) 1/4 1/4 5/16 5/16 3/8 3/8 7/16 7/16 1/2 1/2 9/16 9/16 5/8 5/8 11/16 11/16 Threads Per Inch 20 28 18 24 16 24 14 20 13 20 12 18 11 18 11 16 Thread Limits H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 – Hand Taps Continue – WWW.HANESSUPPLY.COM No. of Flutes 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Size (in) 3/4 3/4 7/8 7/8 1 1 1 1-1/8 1-1/8 1-1/4 1-1/4 1-3/8 1-3/8 1-1/2 1-1/2 2 Threads Per Inch 10 16 9 14 8 12 14 7 12 7 12 6 12 6 12 4-1/2 Thread Limits H3 H3 H4 H4 H4 H4 H4 H4 H4 H4 H4 H4 H4 H4 H4 H4 No. of Flutes 4 4 4 4 4 4 4 4 4 4 6 4 6 4 6 6 22 - 35 22 Cutting Tools Size A B C D E F G H I J K L M HIGH SPEED STEEL Taper Shank – Short body Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Michigan Drill Hand Taps (continued) • List No. 771 – High Speed Steel, Ground Thread • List No. 771T – Titanium Nitride Coated, Ground Thread • List No. 771 SET – 3 Piece Sets, Plug, Bottoming & Taper Chamfer MACHINE SCrEW SIzES Size (in) 0 1 1 2 2 3 3 4 4 4 5 Threads Per Inch 80 64 72 56 64 48 56 36 40 48 40 Thread Limits H1 H1 H2 H2 H2 H2 H2 H2 H2 H2 H2 No. of Flutes 2 2 2 3 3 3 3 3 3 3 3 Spiral Fluted Taps Size Threads Thread No. of Limits Flutes (in) Per Inch 5 44 H2 3 6 32 H3 3 40 H2 3 6 8 32 H3 4 8 36 H2 4 10 24 H3 4 10 32 H3 4 24 H3 4 12 12 28 H3 4 Please specify plug, bottoming or taper chamfer when ordering. HIGH SPEED STEEL Ground Thread, Plug Chamfer Spiral fluted taps are recommended for deep blind hole tapping. They are primarily designed for use in such materials as brass, copper, aluminum, magnesium and die cast metals. Successful results may also be obtained in free machining mild steel applications. • List No. 776 – Fast Spiral – 52° Helix Angle • List No. 776SL – Slow Spiral – 30° Hexil Angle FrACTIONAL SIzES Size (in) 1/4* 1/4 1/4 5/16 5/16 3/8* 3/8 Threads Per Inch 20 20 28 18 24 16 24 Thread Limits H3 H5 H3 H3 H3 H3 H3 No. of Flutes 3 3 3 3 3 3 3 Thread No. of Size Threads (in) Per Inch Limits Flutes 3/8 24 H5 3 7/16 14 H3 3 7/16 20 H3 3 1/2 13 H3 3 1/2 20 H3 3 3/4 10 H3 3 *Available in bottoming chamfer. Size (in) 3 4 5* 6 8 10 Threads Per Inch 48 40 40 32 32 24 Thread Limits H2 H2 H2 H3 H3 H3 No. of Flutes 2 2 2 2 3 3 Size Threads Thread No. of (in) Per Inch Limits Flutes 10 32 H3 3 12 24 H3 3 M6 1.0 D5 3 *Available in bottoming chamfer. MACHINE SCrEW SIzES Metric Taps HIGH SPEED STEEL • List No. 773M – Hand Taps* • List No. 773M – 3 Piece sets, plug, bottoming and taper chamfer • List No. 774M – Spiral pointed taps (plug chamfer only) * Please specify plug, bottoming or taper chamfers when ordering. Size Pitch mm mm 1.6 .35 1.8 .35 2 .40 2.2 .45 2.3 .40 2.5 .45 2.6 .45 3 .50 3 .60 3.5 .60 4 .50 4 .70 4 .75 4.5 .75 5 .50 5 .80 5 .90 6 .50 – continues – 22 - 36 Hand Taps No. of Flutes 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 Spiral Pointed No. of Flutes 2 2 2 2 2 2 2 2 – 2 2 2 – 2 2 2 – – Size mm 6 6 6.3 7 8 8 8 9 10 10 10 10 11 12 12 12 12 14 Pitch mm .75 1.00 1.00 1.00 .75 1.00 1.25 1.25 .75 1.00 1.25 1.50 1.50 1.00 1.25 1.50 1.75 1.00 Hand Taps No. of Flutes 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Spiral Pointed No. of Flutes 2 2 2 2 2 2 2 2 – 3 3 3 3 – 3 3 3 – Metric Taps (continued) Size mm 14 14 14 16 16 16 18 18 20 20 20 20 22 22 22 Pitch mm 1.25 1.50 2.00 1.00 1.50 2.00 1.50 2.50 1.00 1.50 2.00 2.50 1.00 1.50 2.00 Hand Taps No. of Flutes 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Left Hand Taps Spiral Pointed No. of Flutes 3 3 3 3 3 3 3 3 4 4 – 4 – 4 – Threads Per Inch 32 32 24 32 20 28 18 24 16 24 14 20 13 20 12 Thread Limits H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 H3 No. of Flutes 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Size (in) 9/16 5/8 5/8 3/4 3/4 7/8 7/8 1 1 1 1-1/8 1-1/4 1-3/8 1-1/2 Pipe Taps • List No. 790 – High Speed Steel Taper Pipe – NPT/NPTF Ground Thread • List No. 791 – High Speed Steel Straight Pipe Taps – NPS Ground Thread (not pictured) • List No. 792 – High Speed Steel Interrupted Thread – INT/NPT Ground Thread • List No. 793 – Carbon Steel Taper Pipe – NPT Cut Thread (not pictured) british Standard Pipe Taps (bSPT) HIGH SPEED STEEL • List No. 794 WWW.HANESSUPPLY.COM Pitch mm 2.50 1.00 1.50 2.00 3.00 1.50 2.00 3.00 1.50 2.00 3.50 3.00 4.00 3.00 4.00 Spiral Pointed No. of Flutes 4 – – 4 4 – – – – – – – – – – Threads Per Inch 18 11 18 10 16 9 14 8 12 14 7 7 6 6 Thread Limits H3 H3 H3 H3 H3 H4 H4 H4 H4 H4 H4 H4 H4 H4 No. of Flutes 4 4 4 4 4 4 4 4 4 4 4 4 4 4 HIGH SPEED STEEL Ground Thread, Plug Chamfer • List No. 770L Size (in) 6 8 10 10 1/4 1/4 5/16 5/16 3/8 3/8 7/16 7/16 1/2 1/2 9/16 Size mm 22 24 24 24 24 27 27 27 30 30 30 36 36 39 39 Hand Taps No. of Flutes 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 Size (in) 1/16 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 Threads Per Inch 27 27 18 18 14 14 11-1/2 11-1/2 11-1/2 11-1/2 8 8 8 8 Size Threads Per Inch 28 19 19 14 14 14 11 11 11 11 1/8 1/4 3/8 1/2 3/4 7/8 1 1-1/4 1-1/2 2 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Special Thread Taps Ground Thread Michigan Drill • List No. 779 Threads Per Inch Available 36, 48 24, 40 24, 27, 32, 36, 40, 48 20, 22, 27, 32, 36, 40 14, 18, 20, 27, 32, 40 24, 27, 32, 40 12, 14, 16, 18, 24, 28, 37, 40 16, 20, 24, 27, 28, 32, 40 12, 14, 16, 20, 24, 26, 27, 28, 32, 36, 40 12, 18, 20, 24, 32, 36, 40 12, 14, 18, 20, 24, 26, 27, 28, 32, 36 10, 12, 14, 16, 18, 20, 24, 26, 28, 32 12, 16, 18, 20, 24, 27, 32, 40 12, 16, 18, 20, 24, 27, 32 10, 16, 18, 20, 24, 26, 27, 28, 32, 36, 40 8, 10, 12, 14, 16, 18, 20, 24, 32 14, 16, 18, 20, 24, 27, 32 8, 10, 12, 14, 16, 18, 20, 24, 32 10, 14, 16, 18, 20, 24, 26, 27, 32 15/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 Eight Pitch Taps Size 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 No. of Flutes 4 4 4 6 6 6 6 6 Threads Per Inch Available 8, 12, 14, 16, 18, 20 10, 14, 16, 18, 20, 24 8, 12, 16, 18, 20 10, 14, 16, 18, 20, 24, 32 12, 16, 18, 20 5-1/2, 10, 12, 14, 16, 18, 20 12, 16, 18, 20 5, 6, 10, 12, 14, 16, 18, 20, 24 5, 10, 12, 16, 18, 20 12, 16, 18 6, 10, 14, 16, 18, 20 8, 12, 16, 18 4-1/2, 8, 12, 14, 16, 18 12, 16, 18 4, 12, 16 8, 12, 16, 18 12, 16 8, 12, 16 4, 12, 16, 18 4, 8, 12 4, 8, 12 8, 12 8, 12 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-7/8 1-15/16 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/4 3-1/2 3-3/4 4 HIGH SPEED STEEL Ground Thread • List No. 788 Size (in) Size 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/2 4 Hand Reamer (in) 1/8 – 21/64 1/8 – 25/64 11/64 – 7/16 11/64 – 41/64 9/32 – 29/32 3/8 – 1-5/32 37/64 – 1-11/32 3/4 – 1-1/2 7/8 – 2-1/8 “T” Handle Tap Wrenches Tap Capacity Frac. Machine Taps Screw PLAIN TYPE – 6 1/4 8-14 1/4 - 1/2 – RATCHET TYPE – 6 1/4 8-14 1/4 - 1/2 – Tap Extension Tool No. Tool No. TW0 TW4 TW5 TW6 TW7 TW75 TW8 TW10 TW22 22 Tool No. TWX1 TWX4 Screw Pitch Gages • Very Handy Tool for Gaging Threads • High Quality Tool Steel • Supplied in a Plastic Pouch Tool No. Range No. of Leaves #4 - #42 30 TSP1 TSP2 0.25 - 2.5mm 28 Thread American Metric Screw Extractors For removing broken screws, studs, pipe fittings, etc., without damaging the threads. SE Series - Helical Flute • Set No. SE15 – 5 Piece Set. Contains 1 piece of each: Helical Flute, #1 thru #5 Supplies in a vinyl pouch. • Set No. SE69 – 4 Piece Set. Contains 1 piece of each: Helical Flute, #6 thru #9 • Set No. SES15 – 5 Piece Set. Contains 1 piece of each: Straight Flute, #1 thru #5 Supplied in a vinyl pouch. • Set No. SE19 – 9 Piece Set. Contains 1 piece of each: Helical Flute, #1 thru #9 No. of Flutes 6 6 6 6 6 6 8 8 Straight Type Capacity (Tap Sizes) Machine Screw Pipe 0-14 – 0-14 – 8-14 1/8 8-14 1/8 – 1/4 – 1/8 – 3/4 – 1/8 – 1 – 3/8 – 1-1/4 – 1–2 – 3/4 – 2 Overall Lgth. (in) 12 13 SES Series - Straight Flute Adjustable Tap and reamer Wrenches Fraction (in) 1/16 – 1/4 1/16 – 3/8 5/32 – 1/2 5-32 – 3/4 1/4 – 1-1/8 1/2 – 1-3/8 3/4 – 1-5/8 7/8 – 2 1 – 2-1/2 Tap Cap. (in) 5/32 - 1/4 1/4 - 1/2 Cutting Tools Size (in) 6 8 1/4 5/16 3/8 7/16 1/2 9/16 5/8 Extra Long Tap Wrench HIGH SPEED STEEL Size 1 2 3 4 5 6 7 8 9 10 11 12 For Screws & bolts, Sizes 3/16 - 1/4 1/4 - 5/16 5/16 - 7/16 7/16 - 9/16 9/16 - 3/4 3/4 - 1 1 - 1-3/8 1-3/8 - 1-3/4 1-3/4 - 2-1/8 2-1/8 - 2-1/2 2-1/2 - 3 3 - 3-1/2 Pipe Size 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Tool No. SE1 SE2 SE3 SE4 SE5 SE6 SE7 SE8 SE9 SE10 SE11 SE12 Tool No. SES1 SES2 SES3 SES4 SES5 - round Die Stocks Tool No. TWS1 TWS2 TWS3 TWS4 TWS5 TWS6 TWS7 Dia. of Die (in) 5/8 13/16 1 1-1/2 2 2-1/2 3 TWH-1 TWH-2 TWH-3 TWR-1 TWR-2 TWR-3 2 Jaw Chucks with hardened jaws. Tap Cap. (in) 1/4 1/2 Overall Lgth. (in) 7 10-3/4 Tool No. TEX1 TEX2 WWW.HANESSUPPLY.COM 22 - 37 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Michigan Drill Tap and Die Sets Round Adjustable Split Dies (continued) • List No. 753 – Right Hand (Metric) METrIC SIzES HIGH SPEED STEEL AND CARBON • Set No. 777HC – Tap & Hex Die Set #6 to 3/4 NC 41-Piece Carbon Set. Contains 2 piece Tap & Hex Die in the following sizes: 3/4-10, 5/8-11, 9/16-12, 1/2-13, 7/16-14, 3/8-16, 5/16-18, 1/4-20, 1224, 10-24, 8-32, 6-32 2 tap wrenches, 2 die stocks & 1 T-handle • Set No. 778T – Metric Tap & round Adj. Die Set 23-Piece High Speed Set. Contains 1 piece of each: Plug Taps and Round Adj. Dies 5x.8, 5x.9, 6x.75, 6x1.0, 8x1.0, 8x1.25, 10x1.25, 10x1.5, 12x1.5, 12x1.75 1 tap wrench, 2 piece die stock (1" OD, 1-1/2" OD) • High Speed Set No. 777S – Tap & round Adj. Die Set - Inch • Carbon Set No. 777Cb – Tap & round Adj. Die Set - Inch 40 Piece Set. Contains 1 piece of each: Plug Taps and Round Adjustable Dies 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 1/8 NPT 3 tap wrenches, 1 diestock (1" OD), 1 screw pitch gage and 1 screwdriver. • Set No. 777x – Fractional and Metric Tap & Hex Die Set 76 Piece Carbon Set. Contains 1 each Tap & Hex Die in the following sizes: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 1/8-27 NPT, 3x.5, 4x.7, 4x.75, 5x.8, 5x.9, 6x1.0, 7x1.0, 8x1.0, 8x1.25, 9x1.0, 9x1.25, 10x1.25, 10x1.5, 11x1.5, 12x1.5, 12x1.75, 1/8-28BSP. 1 each of the following: Adj. Die Stock, Plain Die Stock, T-tap Wrench, Hex Nut with 3/8 Sq. Drive, Hex Nut Screw Pitch Gauge (Metric), Screw Pitch Gauge, Screwdriver and 2 Adj. Handle Tap Wrenches • Set No. 777HF – Tap & Hex Die Set 41-Piece Carbon Set. Contains 2 Taps & 1 Hex Die in the following sizes: 5-44, 8-36, 10-32, 12-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/16-18, 5/8-18, 3/4-16 2 tap wrenches, 2 diestocks & 1 T-handle. • Set No. 777P – Pipe Tap & Hexagon Pipe Die Set 12-piece Carbon Set. Contains 1 piece each tap and die: 1/8, 1/4, 3/8, 1/2, 3/4, 1" NPT • High Speed Set No. 778S – Metric Tap & round Adj. Die Set • Carbon Set No. 778Cb – Metric Tap & round Adj. Die Set 36 Piece Set. Contains 1 piece of each: Plug Taps and Round Adjustable Dies 3x.5, 3x.6, 4x.7, 4x.75, 5x.8, 6x1.0, 7x1.0, 8x1.0, 8x1.25, 10x1.25, 10x1.5, 11x1.5, 12x1.5, 12x1.75, 1/8 NPT 3 tap wrenches, 1 piece diestock (1" OD), 1 screw pitch gage and 1 screwdriver. round Adjustable Split Dies HIGH SPEED STEEL Screw Adjusting Type • List No. 751 – Right Hand FrACTIONAL & MACHINE SCrEW SIzES Size 0 1 1 2 2 3 3 4 4 5 5 6 6 8 8 10 10 12 Threads Per Inch 80 64 72 56 64 48 56 40 48 40 44 32 40 32 36 24 32 24 Size 12 1/4 1/4 5/16 5/16 3/8 3/8 7/16 7/16 1/2 1/2 9/16 9/16 5/8 5/8 11/16 11/16 3/4 Threads Per Inch 28 20 28 18 24 16 24 14 20 13 20 12 18 11 18 11 16 10 – Round Adjustable Split Dies Continue – 22 - 38 Size 3/4 7/8 7/8 1 1 1 1-1/8 1-1/8 1-1/4 1-1/4 1-3/8 1-3/8 1-1/2 1-1/2 1-3/4 1-3/4 2 2 Threads Per Inch 16 9 14 8 12 14 7 12 7 12 6 12 6 12 5 12 4-1/2 12 Size mm Pitch mm 1.6 .35 .35 1.8 2 .40 2.2 .45 2.3 .40 2.5 .45 .45 2.6 3 .50 .60 3 3.5 .60 4 .50 .70 4 4 .75 .50 4.5 4.5 .75 5 .50 5 .80 5 .90 .50 6 6 .75 6 1.00 6.3 1.00 .75 7 7 1.00 8 .75 Size mm Pitch mm 8 1.00 8 1.25 9 1.00 1.25 9 10 .75 10 1.00 10 1.25 10 1.50 1.00 11 11 1.50 1.00 12 12 1.25 1.50 12 12 1.75 14 1.00 14 1.25 14 1.50 2.00 14 15 1.50 16 1.00 16 1.50 2.00 16 17 1.50 18 1.50 18 2.00 • List No. 760 – NPT Pipe Sizes – Right Hand • List No. 761 – NPS Pipe Sizes – Right Hand Size Threads Per Inch 1/16 27 1/8 27 1/4 18 Size Threads Per Inch 3/8 1/2 3/4 18 14 14 Size mm Pitch mm 18 2.50 1.50 20 20 2.00 2.50 20 22 1.00 22 1.50 22 2.00 22 2.50 1.50 24 24 2.00 24 3.00 27 2.00 3.00 27 28 2.00 30 1.50 30 2.00 30 3.00 3.50 30 33 3.00 33 3.50 36 3.00 4.00 36 39 3.00 39 4.00 Size Threads Per Inch 1 1-1/4 1-1/2 11-1/2 11-1/2 11-1/2 Left Hand round Adjustable Split Dies HIGH SPEED STEEL • List No. 751H FrACTIONAL AND MACHINE SCrEW SIzES Size Threads Per Inch 4 40 4 48 5 40 5 44 6 32 6 40 8 32 8 36 10 24 10 32 12 24 12 28 1/4 20 1/4 28 5/16 18 WWW.HANESSUPPLY.COM Size Threads Per Inch 5/16 3/8 3/8 7/16 7/16 1/2 1/2 9/16 9/16 5/8 5/8 11/16 11/16 3/4 3/4 24 16 24 14 20 13 20 12 18 11 18 11 16 10 16 Size Threads Per Inch 7/8 7/8 1 1 1 1-1/8 1-1/8 1-1/4 1-1/4 1-3/8 1-3/8 1-1/2 1-1/2 1-3/4 2 9 14 8 12 14 7 12 7 12 6 12 6 12 5 4-1/2 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Michigan Drill round Adjustable Special Thread Split Dies Hexagon Rethreading Dies (continued) • List No. 766 – NPT PIPE SIzES, Right Hand HIGH SPEED STEEL • List No. 759 – Right Hand Threads Per Inch Available 36, 48, 56 24, 40, 48, 56 24, 26, 27, 30, 32, 36, 40, 48, 56 20, 22, 27, 32, 36, 40, 48 14, 18, 20, 26, 27, 28, 32, 36, 40, 48 18, 24, 27, 28, 32, 40 12, 14, 16, 18, 24, 28, 32, 40, 48 14, 16, 20, 24, 27, 28, 32, 36, 40 12, 14, 16, 20, 24, 26, 27, 28, 32, 36, 40, 48 12, 18, 20, 24, 32, 36, 40 12, 14, 18, 20, 24, 26, 27, 28, 32, 36, 40, 48 10, 12, 14, 16, 18, 20, 24, 32 12, 16, 18, 20, 24, 27, 28, 32, 40 12, 16, 18, 20, 24, 27, 32 10, 16, 18, 20, 24, 26, 27, 28, 32, 36, 40, 48 8, 10, 12, 14, 16, 18, 20, 24, 28 8, 10, 14, 16, 18, 20, 24, 27, 32 8, 12, 14, 16, 18, 20, 24, 32 8, 10, 14, 16, 18, 20, 24, 27, 32, 36, 40 8, 12, 14, 16, 18, 20, 24, 27, 32 8, 10, 14, 16, 18, 20, 24, 27, 32 8, 12, 16, 18 8, 10, 14, 16, 18, 24, 32 8, 12, 16, 18 5-1/2, 8, 10, 12, 14, 18, 20 8, 12, 16, 18 6, 8, 10, 14, 16, 20, 24 5, 8, 10, 12, 14, 16, 18, 20 6, 8, 10, 14, 16, 18, 20, 24 18 8, 12 12 Hexagon rethreading Dies Dia. of Die 1 1 1 1 1 1 1 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3 4 4 4 Size Threads Per In. 2 56 4 40 4 48 5 40 5 44 6 32 6 40 8 32 8 36 10 24 10 32 12 24 12 28 1/4 20 1/4 28 5/16 18 5/16 24 3/8 16 Size Threads Per In. 3/8 24 7/16 14 7/16 20 1/2 13 1/2 20 9/16 12 9/16 18 5/8 11 5/8 18 11/16 11 11/16 16 3/4 10 3/4 16 7/8 9 7/8 14 1 8 1 12 1 14 Size Threads Per In. 1-1/8 7 1-1/8 12 1-1/4 7 1-1/4 12 1-3/8 6 1-3/8 12 1-1/2 6 1-1/2 12 1-5/8 5-1/2 1-3/4 5 2 4-1/2 2-1/4 4-1/2 2-1/2 4 2-3/4 4 3 4 3-1/4 4 3-1/2 4 3-3/4 4 4 4 Size Threads Per In. 3 .50 3 .60 3.5 .50 3.5 .60 4 .70 4 .75 4.5 .75 5 .80 5 .90 6 1.00 6.3 1.00 7 1.00 8 .75 8 1.00 8 1.25 9 1.00 Size Threads Per In. 9 1.25 10 1.25 10 1.50 11 1.50 12 1.25 12 1.50 12 1.75 14 1.25 14 1.50 14 2.00 16 1.50 16 2.00 18 1.50 18 2.50 20 1.50 20 2.50 Size Threads Per In. 22 1.50 22 2.50 24 2.00 24 3.00 27 2.00 27 3.00 30 1.50 30 2.00 30 3.50 33 2.00 33 3.50 36 3.00 36 4.00 39 3.00 39 4.00 42 3.00 – Hexagon Rethreading Dies Continues – Threads Per In. 14 14 11-1/2 Size 1-1/4 1-1/2 2 Hexagon Special rethreading Dies Threads Per In. 11-1/2 11-1/2 11-1/2 CARBON STEEL • List No. 769 – Right Hand Size 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 Threads Per Inch Available 24, 27, 32, 36, 40, 48 16, 20, 27, 32, 40 18, 20, 27, 32, 40 24, 28, 32, 40 16, 18, 24, 28, 32, 40 16, 20, 24, 32 16, 20, 24, 32 18, 20, 24 18, 20, 24, 32 16, 20, 24, 32 16, 18, 20, 24, 32, 40 14, 16, 18, 20 10, 16, 18, 20, 24, 32 8, 12, 16, 18 8, 16, 18, 20 8, 10, 12, 18 5, 8, 10, 16, 18, 20 8, 12, 18 7, 8, 10, 16, 18, 20 6, 8, 12, 16, 18 8, 14, 16, 18 12, 16, 18, 20 Single-End End Mills Size 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 3-7/8 4 Threads Per Inch Available 4, 5, 6, 8, 10, 12, 14, 18 18 5-1/2, 6, 8, 10, 14, 16, 18, 20 12, 18 5, 8, 12, 16, 18 4, 8, 10, 14, 16, 18, 20, 24 8, 12, 14, 16, 18 4, 6, 8, 10, 12, 14, 16, 18 4, 8, 10, 12, 14, 18 4-1/2, 5, 6, 8, 10, 12, 16, 18 6, 8, 12, 14, 16 6, 8, 10, 12, 14, 18 6, 8, 12 8, 12 4, 8, 12 5, 8, 12 4, 8, 12 8, 12 4, 8, 12 8, 12 4, 8, 12 8, 12 Multi-Flute, regular Length • List No. 765 – Right Hand • List No. 765H – Left Hand • List No. 767 – METrIC SIzES, Right Hand Size 1/2 3/4 1 HIGH SPEED STEEL CARBON STEEL FrACTIONAL AND MACHINE SCrEW SIzES Threads Per In. 27 18 18 • List No. 205 – Quality Import • List No. 205U – Made in USA • Set No. 205A – Quality Import Set No. 205AU – Made in USA – 3/8" Shanks. 6 Piece Set. Contains 1 piece of each: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2. Supplied in wood block. • Set No. 205S – Quality Import No. 205U – Made in USA – 3/4" Shanks. 6 Piece Set. Contains 1 Piece of each: 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-1/2. Supplied in wood block. Dia. Shank of Cut Dia. (in) (in) 1/8 3/8 5/32 3/8 3/16 3/8 7/32 3/8 1/4 3/8 9/32 3/8 5/16 3/8 11/32 3/8 3/8 3/8 13/32 3/8 7/16 3/8 15/32 3/8 1/2 3/8 1/2 1/2 9/16 1/2 5/8 1/2 5/8 5/8 11/16 1/2 11/16 5/8 3/4 1/2 3/4 5/8 3/4 3/4 13/16 1/2 13/16 5/8 Length of Cut (in) 3/8 7/16 1/2 5/8 5/8 11/16 3/4 3/4 3/4 1 1 1 1 1-1/4 1-3/8 1-3/8 1-5/8 1-5/8 1-5/8 1-5/8 1-5/8 1-5/8 1-7/8 1-7/8 – Continues – WWW.HANESSUPPLY.COM Overall No. Length of (in) Flutes 2-5/16 4 2-1/4 4 2-3/8 4 2-3/8 4 2-7/16 4 2-1/2 4 2-1/2 4 2-1/2 4 2-1/2 4 2-11/16 4 2-11/16 4 2-11/16 4 2-11/16 4 3-1/4 4 3-3/8 4 3-3/8 4 3-3/4 4 3-5/8 4 3-3/4 4 3-5/8 4 3-3/4 4 3-7/8 4 4 4 4 4 Dia. Shank of Cut Dia. (in) (in) 13/16 5/8 13/16 3/4 7/8 1/2 7/8 5/8 7/8 3/4 7/8 7/8 15/16 5/8 15/16 3/4 15/16 7/8 1 1/2 1 5/8 1 3/4 1 7/8 1 1 1-1/16 3/4 1-1/8 3/4 1-1/8 7/8 1-1/8 1 1-3/16 3/4 1-1/4 3/4 1-1/4 7/8 1-1/4 1 1-1/4 1-1/4 1-1/4 1-1/4 Length of Cut (in) 1-7/8 1-7/8 1-5/8 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 1-7/8 2 2 2 2 2 2 2 2 2 2 2 22 Cutting Tools Size 6 8 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-7/8 2 2-1/8 2-1/4 2-1/2 Size 1/8 1/4 3/8 Overall No. Length of (in) Flutes 4 6 4-1/8 4 3-5/8 4 4 6 4-1/8 4 4-1/8 4 4 6 4-1/8 4 4-1/8 4 3-7/8 4 4 6 4-1/8 4 4-1/8 4 4-1/2 4 4-1/4 6 4-1/4 6 4-1/4 6 4-1/2 6 4-1/2 6 4-1/4 6 4-1/4 6 4-1/2 6 4-1/4 4 4-1/2 6 22 - 39 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Michigan Drill/M.K. Morse® Single-End End Mills (continued) Dia. Shank of Cut Dia. (in) (in) 1-5/16 1-3/8 1-3/8 1-7/16 1-1/2 1-1/2 1-1/2 1-1/2 1-5/8 1-5/8 3/4 3/4 1 3/4 3/4 1 1-1/4 1-1/4 3/4 1-1/4 Length of Cut (in) 2 2 2 2 2 2 2 2 2 2 Overall No. Length of (in) Flutes 4-1/2 4-1/4 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 Dia. Shank of Cut Dia. (in) (in) 6 6 6 6 6 6 4 6 4 OR 6 6 1-3/4 1-3/4 1-3/4 1-7/8 1-7/8 1-7/8 2 2 2 2 Single-Ended End Mills Multi-Flute 3/4 1-1/4 1-1/4 3/4 1-1/4 1-1/4 3/4 1-1/4 1-1/4 1-1/4 Length of Cut (in) 2 2 2 2 2 2 2 2 2 2 Overall No. Length of (in) Flutes 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4 OR 6 4 6 6 6 8 6 4 6 8 HIGH SPEED STEEL • List No. 206 – Quality Import • List No. 206U – Made In U.S.A. LONG FLUTE Dia. Shank Length Overall of Cut Dia. of Cut Length No. of (in) (in) (in) (in) Flutes 1/4 3/8 1-1/4 3-1/16 4 5/16 3/8 1-3/8 3-1/8 4 3/8 1-1/2 3-1/4 4 3/8 7/16 1/2 1-3/4 3-3/4 4 1/2 1/2 2 4 4 5/8 5/8 2-1/2 4-5/8 4 3/4 1/2 3 5-1/4 4 3/4 3/4 3 5-1/4 4 13/16 7/8 3-1/2 5-3/4 4 7/8 3/4 3-1/2 5-3/4 4 7/8 7/8 3-1/2 5-3/4 4 1 3/4 4 6-1/2 4 1 1 4 6-1/2 4 Dia. Shank Length Overall of Cut Dia. of Cut Length No. of (in) (in) (in) Flutes (in) 1-1/8 1 4 6-1/2 6 1-1/4 3/4 4 6-1/2 6 1-1/4 1 4 6-1/2 6 1-1/4 1-1/4 4 6-1/2 4 4 6-1/2 6 1-1/4 1-1/4 1-3/8 1 4 6-1/2 6 1-1/2 1 4 6-1/2 6 1-1/2 1-1/4 4 6-1/2 4 1-1/2 1-1/4 4 6-1/2 6 1-3/4 1-1/4 4 6-1/2 6 2 1-1/4 4 6-1/2 6 2 1-1/4 4 6-1/2 8 • List No. 207 – Quality Import • List No. 207U – Made In U.S.A. ExTrA LONG FLUTE Dia. Shank Length Overall of Cut Dia. of Cut Length No. of (in) (in) (in) (in) Flutes 1/4 3/8 1-3/4 3-9/16 4 5/16 3/8 2 3-3/4 4 3/8 3/8 2-1/2 4-1/4 4 1/2 1/2 3 5 4 5/8 1/2 4 6-1/8 4 5/8 5/8 4 6-1/8 4 • List No. 277 HEAvY DUTY WITH COMbINATION SHANkS Dia. Shank Length Overall of Cut Dia. of Cut Length No. of (in) (in) (in) (in) Flutes 2 1-1/2 4 6-7/8 3 2 1-1/2 6 8-7/8 6 2 2 2 5-3/4 6 2 2 2 5-3/4 4 2 2 3 6-3/4 2 2 2 3 6-3/4 3 2 2 4 7-3/4 2 2 2 4 7-3/4 3 2 2 4 7-3/4 4 2 2 4 7-3/4 6 2 2 4 7-3/4 6* 2 2 5 8-3/4 2 2 2 5 8-3/4 2* 2 2 6 9-3/4 2 2 2 6 9-3/4 3 2 2 6 9-3/4 4 2 2 6 9-3/4 6** 2 2 6 9-3/4 6* M.k. Morse bi-Metal Hand Hack Saw blades Applications: • Pipe, tubing & solids • Cuts wood, plastic or any machinable metal; including conduit, stainless steel tubing, angle iron, copper tubing, structural materials, etc. Features: • Bi-metal Construction • Tooth Hardness Rc 65-67 • Vacuum Heat Treatment Advantages: • Flexibility Desc. (in) TPI Prod. No. • Increased Heat & Water Resistant 10 x 1/2 x .025 18 HHB1018 • Higher Edge Hardness than other 24 HHB1024 10 x 1/2 x .025 Heat Treatment Methods 10 x 1/2 x .025 32 HHB1032 Benefits: 12 x 1/2 x .025 14 HHB1214 12 x 1/2 x .025 18 HHB1218 • Will Not Shatter 12 x 1/2 x .025 24 HHB1224 • Long Life 12 x 1/2 x .025 32 HHB1232 • Safe Operation 14/18 HHB121418 12 x 1/2 x .025 • Faster Cutting 12 x 1/2 x .025 20/24 HHB122024 • Labor Savings 12 x 1/2 x .025 26/32 HHB122632 Power Hack Saw blades • Bi-metal power blades, consisting of a high speed cutting edge welded to an alloy back, meet all plant safety requirements for long-lasting service under average shop cutting conditions. • To select proper tooth spacing, three teeth minimum must be in contact with the work at all times. L x W x T (in) 12 x 5/8 x .023 Dia. Shank Length Overall of Cut Dia. of Cut Length No. of (in) (in) (in) (in) Flutes 3/4 1/2 4 6-1/4 4 3/4 3/4 4 6-1/4 4 7/8 7/8 5 7-1/4 4 1 1 6 8-1/2 4 1-1/4 1-1/4 6 8-1/2 6 1-1/2 1-1/4 8 10-1/2 6 Dia. Shank Length Overall of Cut Dia. of Cut Length No. of (in) (in) (in) (in) Flutes 2 2 6 9-3/4 8 2 2 8 11-3/4 6 2 2 8 12 6* 2 2 10 13-3/4 6 2-1/2 2 4 7-3/4 4 or 6 2-1/2 2 6 7-3/4 2 2-1/2 2 6 9-3/4 6 2-1/2 2 8 11-5/8 4 or 6 2-1/2 2-1/2 4 8 3 2-1/2 2-1/2 4 8 4 or 6 2-1/2 2-1/2 5 9 4 or 6 2-1/2 2-1/2 6 10 2 2-1/2 2-1/2 6 10 3 2-1/2 2-1/2 6 10 4 3 2-1/2 4 7-3/4 8 3 2-1/2 5 8-3/4 6 or 8 *Ball Endmills **Also Available in Cobalt Center Cut. Prod. No. PHW125814 PHW125818 12 x 1 x .050 PHW1205010 PHW1205014 14 x 1 x .050 PHW1405010 PHW1405014 14 x 1-1/4 x .062 PHW1406206 PHW1406210 14 x 1-1/2 x .075 PHW1407504 PHW1407506 17 x 1 x .050 PHW1705010 PHW1705014 10 Blades per Box 14 18 10 14 10 14 6 10 4 6 10 14 L x W x T (in) bi-Metal (1/2" Shank) blades Prod. No. 17 x 1-1/4 x .062 PHW1706206 PHW1706210 18 x 1-1/4 x .062 PHW1806206 PHW1806210 18 x 1-1/2 x .075 PHW1807504 PHW1807506 18 x 1-3/4 x .088 PHW1808804 PHW1808806 21 x 1-3/4 x .088 PHW2108804 PHW2108806 24 x 2 x .100 PHW2410004 reciprocating Saw blades Teeth 6 10 6 10 4 6 4 6 4 6 4 Features: • Matrix II Cutting Edge • Tooth Hardness Rc- 65-67 • 8% Cobalt • Vacuum Heat Treatment with Special Temper Process • 3/4" Width with .035" & .050" Thickness (thicker & wider than some competitors blades) Advantages: • Shock Resistant Teeth • High Edge Hardness • More Wear Resistance • High Heat Resistance • Greater Rigidity Benefits: • Resists Tooth Strippage • Long Life • Excepts more Feed Pressure for Faster Cutting with Less Distortion – continues – 22 - 40 Teeth WWW.HANESSUPPLY.COM Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools M.K. Morse ® Bi-Metal (1/2" Shank) Blades (continued) Teeth Prod. per In. No 6 x 3/4 x .035 6 RB606ST 6 x 3/4 x .035 9 x 3/4 x .035 12 x 3/4 x .035 6 x 3/4 x .050 9 x 3/4 x .050 12 x 3/4 x .050 6 6 6 6 6 6 RB63506 RB93506 RB123506 RB65006 RB95006 RB125006 10/14 RB41014 10/14 RB121014 WOOD & METAL: Heavy gauge metal, rubber 4 x 3/4 x .035 & fiber, nail-embedded wood. General purpose, metal 12 x 3/4 x .035 cutting, nail-embedded woods. 6 x 3/4 x .035 Wood, nail-embedded wood, compositions, plastic, cast 12 x 3/4 x .035 aluminum & non-ferrous metals. All woods, composition 8 x 3/4 x .035 materials, plastic, nail-embedded 10 x 3/4 x .035 wood, cast aluminum, lightgauge metals. Wood, nail-embedded wood, 6 x 3/4 x .035 compositions, plastic, metals 1/8" & above. Wood/metal. 6 x 3/4 x .050 General purpose, metal cutting, 8 x 3/4 x .035 nail-embedded woods. METAL: Heavy gauge metals 1/8" thick 4 x 3/4 x .035 & above. Barstock & angles. 6 x 3/4 x .035 12 x 3/4 x .035 Heavy gauge metals 1/8" thick 8 x 3/4 x .035 & above. Barstock & angles Heavy gauge metals of 18 4 x 3/4 x .035 gauge to 1/8" thick conduit, 6 x 3/4 x .035 pipe, channels & tubing. 12 x 3/4 x .035 Heavy gauge metals, conduit & 8 x 3/4 x .035 tubing 18 gauge to 1/8" thick Metal cutting 18 gauge & under. 4 x 3/4 x .035 Trim & tubing. Galvanized pipe 6 x 3/4 x .035 under 18 gauge. SPECIAL PURPOSE: Plaster w/ metal lath, 6 x 3/4 x .035 plasterboard, sheet rock, plaster walls. Tooth design cuts both forward & on back stroke. General rough-in scroll cuts, all 6 x 7/16 x .050 woods, nail-embedded woods. Scroll cuts in wood & cast 3 x 5/16 x .035 aluminum, non-ferrous metals. For soil pipe. 8 x 3/4 x .050 General rough-in, all woods, 12 x 3/4 x .050 nail-embedded woods. 10 10 RB610 RB1210 10 10 RB810 RB1010 10/14 RB61014 10/14 10/14 RB650104 RB81014 14 14 14 14 RB414 RB614 RB1214 RB814 18 18 18 18 RB418 RB618 RB1218 RB818 24 24 RB424 RB624 6 RB606P 6 RB65006C 18 RB318S 10/14 10/14 Blade Shape 3 6 3 6 3 6 RTCT603 RTCT606S RTCT903 RTCT906 RTCT1203 RTCT1206 Teeth Prod. per In. No 4 x 3/8 x .035 6 SB3606 4 x 3/8 x .035 10 SB3610 14 SB3614 18 24 SB2718 SB2724 18 SB2718S Blade Shape bosch Shank Sabre/Jig Saw blades bi-Metal blades LxWxT Teeth Recommended Use (in) per In. WOOD: Wood, Fiber Board, Asbestos, 4 x 5/16 x .040 6 Roughing Work General Purpose - Wood Cutting, 4 x 5/16 x .035 8 Compositions, Plastic. All Woods, Composition 4 x 5/16 x .035 10 Material, Plastics, Plywood Softwood, Hardwood, Plywood, 4 x 5/16 x .050 10 Chipboard, Plastic up to 1" Thick. Very Clean Cutting - Long Life Blade WOOD & METAL: Softwood, Aluminum, Non5-1/4 x 5/16 x .042 12 Ferrous Metal up to 3/8", Plastic, Sandwich Material up to 3-3/4", Extra Long Blade METAL: Steel & Non-Ferrous Metal 3 x 2/8 x .035 14 1/8" Thick & Up. Metals Over 18 Gauge, Tubing, 3 x 3/8 x .035 18 Conduit Soft Steel, Aluminum, Non5-1/4 x 5/16 x .042 Ferrous Metal up to 1/8", Sandwich Material up to 3-3/4". Extra Long Blade Thin Metals, Plastic, Fine Cuts 3 x 3/8 x .035 Under 18 Gauge Tooth Style = Milled Prod. No Blade Shape SB046 SB0408 SB0410 SB0410CC* SB0512L SB0314 SB0318 21 SB0521L 24 SB0324 * Cross Sharpened Conical Ground bayonet Shank Sabre/Jig Saw blades bi-Metal blades Tungsten Carbide Tipped blades 6 x 3/4 x .050 6 x 3/4 x .050 9 x 3/4 x .050 9 x 3/4 x .050 12 x 3/4 x .050 12 x 3/4 x .050 LxWxT (in) Tooth Style = Milled reciprocating Saw blades Recommended Use Special Purpose: Plaster over lath, fiberglass, wood & non-ferrous metal Recommended Use WOOD: Wood, Fiber Board, Asbestos, Coarse Cut Wood, Plywood, Hard-Board SPECIAL PURPOSE: Scroll - Metal 18 Gauge & under. 2-3/4 x 3/16 x .035 RB8501014 RB12501014 Teeth Prod. per In. No bi-Metal blades WOOD & METAL: Non-Ferrous Metals, Fiberglass, 4 x 3/8 x .035 Hard Rubber, Nail-Embedded Wood. METAL: Metal 18 Gauge & under. 3 x 3/8 x .035 Metal & Non-Ferrous Metal 3 x 3/8 x .035 up to 1/8" Tooth Style = Milled LxWxT (in) Universal Shank Sabre/Jig Saw blades Blade Shape Recommended Use WOOD: Wood, Plastic, Compositions Wood, composition non-ferrous metals, medium - smooth finish WOOD & METAL: Steel & non-ferrous metals 1/8" thick & above - plastic, asbestos, fiberglass, hard rubber & fiber METAL: Metal over 1/8" thick, plastic, fiberglass. Heavy gauge metal - 18 gauge to 1/8". Metal - 18 gauge & under. Tooth Style = Milled WWW.HANESSUPPLY.COM LxWxT (in) Teeth per In. Prod. No 3 x 3/8 x .035 3 x 3/8 x .035 6 10 SBB306 SBB310 3 x 3/8 x .035 14 SBB314 1-3/4 x 1/4 x .035 14 SBB214 1-3/4 x 1/4 x .035 18 SBB218 1-3/4 x 1/4 x .035 24 SBB224 22 Cutting Tools Recommended Use WOOD: Wood, nail-embedded wood, all composition material. General rough-in, all woods, nail-embedded woods. LxWxT (in) Blade Shape 22 - 41 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 band Saw blade Characteristics M.K. Morse® There are hundreds of band saw machine models in use today and tens of thousands of potential band saw blade specifications. Yet for each application, there is one “best” blade. Each of the following variables must be considered in selecting that best band saw blade specification for a given application. LENGTH - Band saw length varies by machine model. Blades are available custom welded to fit specific machines or in coil form for distributor or user welding. Blade length may be specified in either inches (e.g. 150") or in feet (e.g. 12'6"). Morse uses the foot designation. WIDTH - Most machines accept one width only. The following should be considered for machines that can accommodate multiple widths. • Wider blades allow more tension and more feed pressure for faster and straighter cuts in production applications. • In contour sawing on vertical machines, the smaller the radius in a given pattern, the narrower the blade required. TOOTH PITCH - Pitch determines the number of teeth per inch for a given cross section to be cut. More teeth per inch are needed for thin materials and fewer teeth per inch for thicker materials. Ideally, 6-10 teeth should be in contact with the work in metal cutting, while more teeth may be required for harder materials or a smoother finish. There should never be fewer than three teeth in contact with the work for bi-metal and six teeth for carbon. • Standard Pitch - A single, constant size and shape throughout the length of the blade or coil. • variable Pitch - Tooth and gullet size vary in progressive intervals through the length of the blade or coil. Varying tooth size reduces vibration for quieter, more efficient cutting. band Saw blade Characteristics TOOTH SET - The teeth of most saw blades are offset to each side so that the cut or “kerf” is wider than the blade body. The set prevents the back of the blade from binding in the work. • raker - Available in both carbon and bi-metal and used for most standard, skip, and hook form specifications. Teeth are set in a recurring pattern right, left, straight - with the straight tooth clearing or “raking” the chips from the work. • Wavy - Available in finer carbon and bi-metal tooth specifications. Teeth are set in a “wave” pattern reducing impact on individual teeth and increasing contact area with the work. The wave pattern allows better finish and reduces the risk of tooth damage in thin walled materials. • Alternate (ETS) - Used primarily in carbon specialty furniture blades, all teeth are set alternately to the left and right. Each tooth cuts resulting in faster, smoother cutting in wood and select non-ferrous alloy and non-metallic applications. • Modified raker -The primary set pattern used in bi-metal variable pitch blades. Unlike the standard raker design, where every third tooth “rakes”, modified raker features a straight or “raker” tooth only after 4 or 6 set teeth. 22 - 42 TOOTH FOrM: • Straight - A straight (0O) tooth face for metals with easy to moderate machinability or for applications with varying tooth loads such as pipe and structural materials. • Positive rake - Teeth “lean” into the work via a 5 to 10O rake angle, for more aggressive cutting in moderate to difficult to machine materials. TOOTH TYPE: • Standard - Available in carbon and bi-metal, it features a 0O rake angle and constant tooth pitch for general purpose sawing in a wide range of applications. • variable Pitch - Available in bi-metal only. Standard variable pitch features a 0O rake angle with varying tooth and gullet sizes for smooth and more efficient cutting in both solid and structural materials. • variable Pitch - Positive rake - Available in bi-metal only, these blades offer a 10O positive rake angle for faster, more aggressive cutting in thicker, harder to machine materials. • Skip - Available in carbon only. Wide, flat, shallow gullets for efficient chip removal in large sections of non-ferrous metals or non-metallic materials. • Hook - Available in carbon and bi-metal. 10O positive rake angle and rounded gullets allow for faster, more aggressive cutting with less feed pressure than straight face blades in both hard to cut metals and wood. variables Affecting blade Selection Variable Machine Size Options Blade Length Blade Choice Determined by Model (300+ Options) 1 - 8 Widths per Model Frequency of use Production Cutting in Metal Production Cutting in Wood Bi-Metal Matrix or M42 Blade Width(s) Carbon Hard Edge Flexible Back of Hard Edge Hard Back Carbon Hard Edge Flexible Back or Hard Edge Hard Back Considerations Larger Machines - More capacity (larger pieces), more control, higher production. Small machines - low cost. Wide blades - more tension, feed pressure for for faster, straighter cut-off. Narrow widths - allow tight curved cuts or vertical machine. Bi-Metal allows higher cutting speed, more feed pressure for faster cutting, greater resistance to wear & lower cost per cut. HEF, HB blades can withstand high production rates due to low heat generation in wood. Occasional Use/ Differing materials & applications subject blades to conditions Various Apps. which can destroy carbon or bi-metal blades. Cutting rates are (Maintenance in not critical. Okay to run carbon blades at lower speeds. Wood or Metal) Type of Easy to Cut Materials Carbon Hard Edge Low blade cost; high cost per cut. Materials Easier Manageability Flex Back or Hard Low blade cost; better performance on larger machines. Edge Hard Back or Higher blade cost; lower cost per cut. Bi-Metal Matrix Hard to Machine Bi-Metal M42 Only Bi-Metal blades offer heat resistance & wear resistance Metals (i.e. Stainless, Capable of cutting materials of moderate to difficult Special Alloys, etc.) machinability. Wood or Easy to Carbon hard Edge Can achieve good cost per cut due to easy cutting. Cut Material Flexible Back or Hard Hard Edge Hard Back Dimensions/ Various Dimensions Min. 3 Teeth in contact Ideal is 6-10 teeth in contact w/work. Use finer pitch for Shapes of of Solids w/work at all times harder materials. Too few teeth per inch can destroy teeth. Material Interrupted Cuts Determine TPI by Wall For production sawing in interrupted, irregular shapes use Pipe, Angle, Thickness rather than Variable Pitch tooth pattern if possible. I-Beam, etc.) nominal pipe or angle size. Finish Fine Finish Fine Pitch (More TPI) Fine finish from fine pitch will slow production rate. Rough Finish Coarse Pitch Faster cutting but rougher cut. Speed Fast Cutting Coarse Pitch Rough Cuts. of Cut Slow Cutting Fine Pitch Slow cutting will also help to prevent dulling of carbon blades in some harder materials. WWW.HANESSUPPLY.COM Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools M.K. Morse ® Carbon band Saw blades bi-Metal band Saw blades bi-Metal – Matrix II – (bIM-MTx) Width x Thickness (in) 1/4 x .025 3/8 x .025 1/2 x .020 1/2 x .025 5/8 x .035 3/4 x .035 1 x .035* 1-1/4 x .042* 1-1/2 x .050* Std. Tooth Raker Set 10,14 8,10,14 10 6,10,14,18 Teeth Per Inch Variable Pitch 10/14 Wavy Set 14,18,24 10,14 6,8,10,12,14 4,6,8,10,14 4,6 Advantages: • High Heat Resistance • High Wear Resistance • Prevents Tooth Damage • Fatigue Resistant • Increased Tooth Penetration 10/14, 14/18, 20/24 6/10, 8/12, 10/14, 14/18 5/8, 6/10, 10/14 5/8, 6/10, 8/12, 10/14 3/4, 4/6, 5/8, 6/10, 8/12, 10/14 3/4, 4/6, 5/8, 6/10, 8/12 2/3, 3/4, 4/6, 5/8 bi-Metal band Saw blades Variable Pitch Positive Rake Hook Tooth 6 4 3,4 4/6 3 3/4, 4/6 2/3, 3/4, 4/6 2,3 3/4, 4/6 bi-Metal – M42 Cobalt – (bIM-M42) 3 Features: • M42 High Speed Steel Cutting Edge • Tooth Hardness Rc 67-69 • 8% Cobalt • Alloy Steel Backer Advantages: • High Heat Resistance • High Wear Resistance Benefits: • Long Life on Difficult to Cut Materials • Less Blade Changes • Highest Production Rates in Select Materials Applications: • For the toughest production cutting jobs in controlled cutting conditions. • Efficient cutting in solids with very low machinability. • NOT recommended for structural materials, stacked or bundled materials or for machines with varied applications or operators. • Cuts “super” alloys, tool steels, “D” grade steels, etc. Width x Thickness Std. Tooth (in) Raker Set 3/4 x .035 1 x .035* 4,6,8 1-1/4 x .042* 4,6 1-1/2 x .050* 4 Variable Pitch Regular 6/10 5/8, 6/10 5/8 5/8 Teeth Per Inch Variable Pitch Positive Rake 2/3, 3/4, 4/6 2/3, 3/4, 4/6 2/3, 3/4, 4/6 Description (in) Actual Size 1.083" 1.360" 1.635" * Bi-Metal bands Nominal Size marked 1", 1-1/4", & 1-1/2" are over1" sized to fit both 1-1/4" U.S. & metric saws. 1-1/2" Hook Tooth 3,4 3,4 Carbon – Hard Edge – Flexible back (HEF) Features: • One Piece Construction • Tooth Hardness Rc 64-67 • Back Hardness Rc 28-35 Advantages: • Fatigue Resistant even at High Speeds Benefits: • Low Cost • Good Wear Resistance in Select Applications Applications: • For small light duty machines with occasional use. • For tool rooms and general maintenance areas. • General purpose cutting of mild steels and non-ferrous metals. • Cuts wood, plastic, cork, fiberglass, graphite, aluminum, brass, bronze, cast iron, copper, lead, zinc, etc. Width x Thickness Std. Tooth (in) Raker Set 10,14,18,24 3/16 x .025 1/4 x .014 14,18 1/4 x .020 1/4 x .025 8,10,12,14,18,24 3/8 x .014 14 3/8 x .025 8,10,14,18,24 1/2 x .020 6,8,10 1/2 x .025 6,8,10,14,24,32 5/8 x .032 8,10,14,18 3/4 x .032 6,8,10,12,14,18 1 x .035 6,8,10,14 1 x .042 1-1/4 x .035 1-1/4 x .042 2 x .035 Teeth Per Inch Skip Hook Tooth Tooth Raker 4 24,32 6 4 32 4,6 4,6 24,32 6 3,4 3,4,6 14,18,24 3 10,14,18,24,32 3,4 3,4,6 10,14 3,4,6 8,10,12,14,18 3,4 2,3,4,6 10,14 2,3 1.3,2,3,4,6 1.3 1.14,1.3 1.0,1.14,1.3 1.3 Std. Tooth Wavy Set Hook Tooth ETS 4 4 3 3 4 3 3 Carbon band Saw blades Carbon – Hard Edge – Hard back (Hb) Features: • One Piece Construction • Tooth Hardness Rc 64-67 • Back Hardness Rc 42-48 Advantages: • Accepts Heavier Feed Pressure and Blade Tension than HEF Benefits: • Faster Cutting Rate • Straighter Cuts Applications: • Light to medium production and nonproduction work on small to mid-sized machines. • Cuts cold rolled steel, carbon tool steels, annealed steels, solids, structurals, brass, bronze, cast iron, lead, zinc. Width x Thickness Std. Tooth (in) Raker Set 3/16 x .025 10,14,18 1/4 x .025 10,14,18,24 3/8 x .025 8,10,14,18 1/2 x .020 14,24 1/2 x .025 6,10,14,18,24 5/8 x .032 8,10,14,18 3/4 x .032 6,8,10,12,14,18 1 x .035 6,8,10,14 1-1/4 x .035 1-1/4 x .042 WWW.HANESSUPPLY.COM Teeth Per Inch Std. Tooth Skip Wavy Set Tooth 4 32 4,6 18 3,4 10,14,18,24 3,4 8,10,12,14,18 10 3,4 3 Hook Tooth Raker 4,6 3,4,6 3,4,6 4,6 3,6 2,3,4 1.3 1.3 22 - 43 22 Cutting Tools Features: • Matrix II High Speed Steel Edge • Tooth Hardness Rc 66-68 • 8% Cobalt • Alloy Steel Backer • Positive Rake Benefits: • Longer Life than Carbon Blades • Higher Production • Faster Cutting Applications: • General purpose bi-metal for efficient production cuffing of materials with mild to moderate machinability. • Solids, shapes, tubing and structural materials. • Best choice for bundled or stacked pieces. • Cuts alloy steels (annealed or heat treated), tool steels, stainless steels, air hardening die steels. Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 M.K. Morse® Portable band Saw blades bi-Metal blades Advantages: • High Resistance to Heat & Wear • High Shock Resistance • Variable Pitch Reduces Vibration Features: • Bi-Metal Construction • Rc 65-67 Matrix II Cuffing Edge • Variable or Standard Pitch Benefits: • Long Life • Reduced Breakage • Faster Cutting and Length (in) Longer Life Variable Pitch Applications: 44-7/8 x 1/2 x .020 • Fit all standard 44-7/8 x 1/2 x .020 portable band saw 44-7/8 x 1/2 x .020 machines. 53-3/4 x 1/2 x .020 • For pipe, tubing and Standard Pitch solids. 44-7/8 x 1/2 x .020 • Cut any machinable 44-7/8 x 1/2 x .020 44-7/8 x 1/2 x .020 metal, including conduit, angle iron, struc44-7/8 x 1/2 x .020 53-3/4 x 1/2 x .020 turals, rebar, stainless 53-3/4 x 1/2 x .020 steel tubing, etc. 53-3/4 x 1/2 x .020 53-3/4 x 1/2 x .020 Hole Saws - “Av” bi-Metal TPI Prod. No. Set 10/14 14/18 20/24 10/14 ZWEP441014M ZWEP441418M ZWEP44024M ZWEP531014 Wavy Wavy Wavy Wavy 10 14 18 24 10 14 18 24 ZWEP4410R ZWEP4414W ZWEP4418W ZWEP4424W ZWEP5310R ZWEP5314W ZWEP5318W ZWEP5324W Raker Wavy Wavy Wavy Raker Wavy Wavy Wavy Features: Advantages: • Bi-Metal Construction • Shock Resistant Teeth • M3 Cutting Edge • Higher Wear Resistance • 4/6 Variable Pitch • Reduces Vibration • Positive Rake • Better Chip Clearance • 1-1/2" Cutting Depth • Separate Arbor Required Benefits: • Teeth Stay Sharp • Long Life • Smoother Cuts • Fast Cutting • Cuts Through 2" x 4"s Applications: • Cut holes in wood, plastic, or any machinable metal, including: nail-embedded wood, plywood, pipe, stainless steel, etc. Diameter* (in) (mm) Prod. Pipe Tap Pipe Ent. No. Size (in) Size (in) Diameter* (in) (mm) Av100 Maintenance kit - Designed for plumbers, electricians, industrial and general purpose maintenance, this kit contains 9 plumbing and electrical sizes for pipe and conduit through 2". Contains (1 each): 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2". Av100 Kit also includes 1 each: M24K, M44, M45P arbors and 12" extension. Av02E Electricians kit - Designed for electricians, this kit contains pipe entrance sizes for pipe and conduit through 2". Contains (1 each): 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2". Kit also includes 1 each: M44 and M45P arbors. Av05M Mechanics kit - This kit offers the 5 most popular hole saw sizes. Applications in construction, industry, and automotive. Contains (1 each): 7/8", 1", 1-1/8", 1-1/4", 1-1/2". Kit also includes 1 M34 arbor. Av04P Plumbers kit - Designed for plumbers, this kit contains pipe tap sizes for pipe through 2". Contains (1 each): 3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4". Kit also includes 1 each: M44 and M45P arbors. Av08E Master Electricians kit - Pipe entrance sizes for pipe and conduit through 4". Contains (1 each): 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", 3", 3-5/8",4-1/8",4-1/2". Kit also includes 1 each: M24K, M44, and M45P arbors. Av061 Industrial kit - Designed for abroad range of industrial applications, this kit contains 15 plumbing and electrical sizes for pipe and conduit through 4". Contains (1 each): 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 3", 3-1/4", 3-5/8", 3-3/4", 4-1/4", 4-1/2". Kit also includes 1 each: M24K, M44, M45P arbors and 12" extension. Av09E Special Electricians kit - Pipe entrance sizes for 2-1/2", 3", 3-1/2", 4" pipe. Contains (1 each): 3", 3-5/8", 4-1/8", 4-1/2". Kit also includes 1 M45P arbor. Arbors and Accessories Prod. Pipe Tap Pipe Ent. No. Size (in) Size (in) 9/16 14 AV09 2 51 AV32 1-1/2 5/8 16 AV10 2-1/16 52 AV33 * 16 AV105 2-1/8 54 AV34 * 55 AV345 11/16 17 AV11 2-1/4 57 AV36 2 3/4 19 AV12 3/8 * 20 AV125 2-5/16 59 AV37 2-3/8 60 AV38 13/16 21 AV13 7/8 22 AV14 3/4 1/2 2-1/2 64 AV40 2 15/16 24 AV15 2-9/16 65 AV41 2-5/8 67 AV42 2-1/2 * 25 AV155 1 25 AV16 * 68 AV425 1-1/16 27 AV17 * 68.5 AV435 2-3/4 70 AV44 1-1/8 29 AV18 1 3/4 * 30 AV185 2-7/8 73 AV46 1-3/16 30 AV19 * 75 AV475 3 76 AV48 2-1/2 1-1/4 32 AV204 1-3/8 35 AV224 3-1/8 79 AV50 1-1/2 38 AV244 3-1/4 83 AV52 3 3-3/8 86 AV54 1-1/4 32 AV20 * 32 AV205 3-1/2 89 AV56 1-5/16 33 AV21 3-5/8 92 AV58 3 3-3/4 95 AV60 3-1/2 1-3/8 35 AV22 1 * 35 AV225 3-7/8 98 AV62 1-7/16 37 AV23 * 100 AV63 4 102 AV64 1-1/2 38 AV24 1-1/4 1-9/16 40 AV25 4-1/8 105 AV66 3-1/2 * 40 AV255 4-1/4 108 AV68 4-3/8 111 AV70 1-5/8 41 AV26 1-11/16 43 AV27 4-1/2 114 AV72 4 1-3/4 44 AV28 1-1/2 1-1/4 4-3/4 121 AV76 4-1/2 5 127 AV80 * 45 AV285 1-13/16 46 AV29 5-1/2 140 AV88 1-7/8 48 AV30 5-3/4 146 AV92 6 152 AV96 * 50 AV315 * Exact metric sizes. Other metric sizes are approximate metric equivalents of exact inch sizes. - AV09 - AV244 use any of the following arbors M24, M24K, M34, M44 or M44K. - AV20 - AV38 use any of the following arbors M35PS, M45, M45P, M46PS, M55P or M44K. - AV40 - AV96 use any of the following arbors M45P, M46PS, M55P or M44K. 22 - 44 bi-Metal variable Pitch Hole Saw kits M24k M24 M34 M44 M35PS Arbors Complete with Pilot Drills Prod. Shank Thread Drill No. Size Size No. M24K* 1/4 Round 1/2 - 20 MPD4 AV244 M24 1/4 Hex 1/2 - 20 MPD4S AV244 M34* 3/8 Hex 1/2 - 20 MPD4S AV244 M44K 7/16 Hex 1/2 - 20 MPD4 M44* 7/16 Hex 1/2 - 20 MPD4 AV244 M35PS* 3/8 Hex 5/8 - 18 MPD4S M45 7/16 Hex 5/8 - 18 MPD4 M45P* 7/16 Hex 5/8 - 18 MPD4 M46PS 7/16 Hex 5/8 - 18 MPD4S M55P 5/8 Hex 5/8 - 18 MPD4 M34CT 3/8 Hex 1/2 - 20 MPD4SCT M45PCT 7/16 Hex 5/8 - 18 MPD4CT M45 Chuck Size 1/4 1/4 M45P M55P Arbor Fits Follow Extension Saws Through – AV09-AV244 AV12- – AV09-AV244 AV12- 3/8 – AV09-AV244 AV12- 3/8 1/2 1/2 1/2 3/4 3/8 1/2 – ME12 ME12 ME12 – – ME12 AV20-AV38 AV20-AV38 AV20-AV96 AV20-AV96 AV20-AV96 AT09-AT19 AT20-AT96 1/2 1/2 ME12 ME12 AV09-AV96 AV24-AV96 AV09-AV244 AV12- * M24KC, M34C, M35PSC, M44C, M45PC carded arbors available WWW.HANESSUPPLY.COM M44k Fits All Sizes AV23-AV96 AV20-AV96 AV23-AV96 AV23-AV96 AV24-AV96 AT12-AT19 AT23-AT96 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools M.K. Morse ® Specialty Hole Saws “AT” Carbide Tipped Diameter (in) (mm) 3/4 19 21 13/16 7/8 22 15/16 24 1 25 27 1-1/16 1-1/8 29 1-3/16 30 1-1/4 32 1-5/16 33 35 1-3/8 1-7/16 37 1-1/2 38 1-9/16 40 1-5/8 41 43 1-11/16 Prod. No. AT12 AT13 AT14 AT15 AT16 AT17 AT18 AT19 AT20 AT21 AT22 AT23 AT24 AT25 AT26 AT27 Prod. No. AT28 AT29 AT30 AT32 AT33 AT34 AT36 AT37 AT38 AT40 AT41 AT42 AT44 AT46 AT48 AT50 Diameter (in) (mm) 1-3/4 44 46 1-13/16 1-7/8 48 2 51 2-1/16 52 2-1/8 54 2-1/4 57 2-5/16 59 60 2-3/8 2-1/2 64 65 2-9/16 2-5/8 67 2-3/4 70 2-7/8 73 3 76 79 3-1/8 Diameter (in) (mm) 3-1/4 83 3-3/8 86 3-1/2 89 3-5/8 92 3-3/4 95 3-7/8 98 4 102 4-1/8 105 108 4-1/4 4-3/8 111 4-1/2 114 4-3/4 121 5 127 5-1/2 140 5-3/4 146 152 6 Prod. No. AT52 AT54 AT56 AT58 AT60 AT62 AT64 AT66 AT68 AT70 AT72 AT76 AT80 AT88 AT92 AT96 Specialty Hole Saws “AD” bi-Metal – Deep Cutting Features: • 1-7/8" Cutting Depth Advantages: • M3 Cutting Edge • Deep Cutting • 4/6 Variable Pitch • Convenience • Separate Arbor Required • High Wear Resistance Benefits: • Reduces Vibration • Cuts 2" x 4"s, Doors etc. in One Pass • Saves Time • Longer Life • Smoother Cuts Applications: • Cuts through 2" x 4"s, joists and most doors in one pass. • Cut holes in wood, plastic or any machinable material. • For locksmiths, remodeling and general contractors. Diameter (in) (mm) 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 1-7/8 19 22 25 29 32 35 38 44 48 Prod. Pipe Tap Pipe Ent No. Size (in) Size (in) AD12 AD14 AD16 AD18 AD20 AD22 AD24 AD28 AD30 3/4 1 1-1/4 1-1/2 3/8 1/2 3/4 1 1-1/4 Diameter (in) (mm) 2 2-1/8 2-1/4 2-1/2 3 3-3/8 4-1/4 6-5/8 51 54 57 64 76 86 108 168 Prod. Pipe Tap Pipe Ent No. Size (in) Size (in) AD32 AD34 AD36 AD40 AD48 AD54 AD68 AD106 2 1-1/2 2 2-1/2 Prod.# TAD01 TAD02E TAD03L TAD04P Desc. Contents Maintenance 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", Kit 1-3/4", 2", 2-1/4", 2-1/2", 4 MPD4, 1 SD10, 1 ME12 Electricians 7/8", 1-1/8", 1-3/8", 1-3/4", 2", Kit 2-1/2", 3 MPD4 Locksmiths 3/4", 7/8", 1", 1-3/8", 1-1/2", 1-5/8, Kit 1-3/4", 2-1/8", 4 MPD4, 1 SD10 Plumbers 3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", Kit 2-1/4", 3 MPD4 22 Applications For 3/8" - 2" pipe. For Plumbing, electrical, industrial, maintenance. For 1/2" - 2" pipe entrance. For assorted lock & security applications. For 1/2" - 2" pipe tap. Tungsten Carbide Grit Products: Carbide Grit rod Saws Advantages: Features: • Super Resistant to Heat, Wear • Tungsten Carbide Grains and Abrasion • Thin Cutting Profile • Resists Snagging Benefits: • Cuts Shapes and Patterns • Cuts Materials other Blades can’t Cut • Fits in Areas of Limited Access • Won’t Tear Thin Materials • Allows Custom Cuts in Unusual Applications Applications: • Fits standard hack saw frames. • For difficult applications including glass, hardened steel. • For special shape cuts in ceramic tile. Description (in) (mm) 10 250 12 300 Product No. Boxed Carded (25/Box) (1/cd-10/box) HRTCG10 HRCTCG10 HRTCG12 HRCTCG12 Carbide Grit Hack Saw blades Features: Advantages: • Tungsten Carbide Grains Bonded • Super Resistant to Heat, to Alloy Body Wear and Abrasion • Cuts in any Direction • Cut on Push and Pull Stroke • Resists Snagging Benefits: • Cuts Materials other Blades can't Cut • Faster Cuffing and Long Life • Won’t Tear Thin Materials Applications: • Fits standard hacksaw frames. • For difficult applications including glass, hardened steel, chains, bolts, hydraulic hose, stranded cable, etc. Description (in) (mm) 10 250 12 300 Product No. Boxed Carded (25/Box) (1/cd-10/box) HHTCG10 HHCTCG10 HHTCG12 HHCTCG12 Carbide Grit reciprocating & Sabre/Jig Saw blades Features: • Tungsten Carbide Grains Bonded to Alloy Body Advantages: • Super Resistant to Heat, Wear and Abrasion • Resists Snagging Benefits: • Cuts Materials other Blades can’t Cut • Won’t Tear Thin Materials • Smooth Finish • Long Life in Difficult Materials – continues – WWW.HANESSUPPLY.COM 22 - 45 Cutting Tools Features: Advantages: • Tungsten Carbide Tooth Tips • Highest Wear Resistance • Ground and Set Teeth • Better Chip Clearance • 3 Teeth Per Inch • Separate Arbor Required Benefits: • Long Life in Abrasive Materials • Cuts Material Bi-Metal will not Cut • Fast Cuts Applications: • Designed for sawing holes in abrasive materials such as fiberglass, particle board, asbestos board, cast iron and formica. “TAD” Deep Cutting Hole Saw kits Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools M.K. Morse® /Morse® Cutting Tools 22 Carbide Grit Reciprocating & Sabre/Jig Saw Blades (continued) Applications: • Fit all popular reciprocating and sabre/jig saw machines. • Cut fiberglass, lath, plaster, ceramic tile, soil pipe, composites, particle board, laminates, hardwood flooring, marble, hardened steel, etc. • For boat and aircraft manufacturing, counter tops, general construction, industrial maintenance. Description Blade Shape Reciprocating (1/2" Shank) Saw Blades 4" Reciprocating Blades 6" Reciprocating Blades 8" Reciprocating Blades Universal Shank Sabre/Jig Saw Blades 2-3/4" Fine Grit Saw 2-3/4" Med. Grit Saw 2-3/4" Coarse Grit Saw 3-5/8" Fine Grit Saw 3-5/8" Med. Grit Saw 3-5/8" Coarse Grit Saw 4" Flush Grit Saw Bosch Shank Sabre/Jig Saw Blades 4" Fine Grit Saw 4" Med. Grit Saw 4" Coarse Grit Saw Mikita Shank Sabre/Jig Saw Blades 3-1/8" Fine Grit Saw 3-1/8" Med. Grit Saw 3-1/8" Coarse Grit Saw # Boxed (25/Box) # Carded (1/Cd - 10/Box) RTCG4 RTCG6 RTCG8 RCTCG4 RCTCG6 RCTCG8 STCG27-F STCG27-M STCG27-C STCG36-F STCG36-M STCG36-C SCTCG27-F SCTCG27-M SCTCG27-C SCTCG36-F SCTCG36-M SCTCG36-C SFTCG4-M SCOTCG4-F SCOTCG4-M SCOTCG4-C SMTCG31-F SCMTCG31-F SMTCG31-M SCMTCG31-M SMTCG31-C SCMTCG31-C Tungsten Carbide Grit Products Features: • Tungsten Carbide Grains Bonded to Alloy Back • Gulleted Edge 1-3/8" Cutting Depth Separate Arbor Required Advantages: • Super Resistant to Heat, Wear and Abrasion • Shock Resistant Back • Resists Snagging Benefits: • Cuts Materials Bi-Metal Blades can't Cut • Long Life • Smoother Cut Applications: • Cuts holes in materials that are too hard or abrasive for standard bi-metal hole saws. • Cuts thinner materials that would strip bi-metal or carbide teeth. • For ceramics, fiberglass, hardwoods, cast iron, composites, etc. 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 22 - 46 19 22 25 29 32 35 38 41 44 48 51 54 57 60 64 67 70 73 Prod. Pipe Tap Pipe Ent. No. Size (in) Size (in) ATCG12 ATCG14 ATCG16 ATCG18 ATCG20 ATCG22 ATCG24 ATCG26 ATCG28 ATCG30 ATCG32 ATCG34 ATCG36 ATCG38 ATCG40 ATCG42 ATCG44 ATCG46 3/4 1 1-1/4 1-1/2 2 2-1/2 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Diameter (in) (mm) 3 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 3-7/8 4 4-1/8 4-1/4 4-3/8 4-1/2 4-3/4 5 5-1/2 5-3/4 6 76 79 83 86 89 92 95 98 102 105 108 111 114 121 127 140 146 152 3 3-1/2 2-1/2 3 3-1/2 4-1/2 Single Cut USE: General Purpose – Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. Double Cut USE: For rapid stock removal in tough applications. Design reduces the pulling action, reduces size of chips, ensures rapid stock removal. Dia. 1/8 1/8 5/32 3/16 1/4 1/4 5/16 3/8 3/8 Lgth. of Tool No. Cut (in) SA-11 1/2 SA-12 5/8 SA-13 5/8 SA-14 5/8 SA-1 5/8 SA-1L 1 SA-2 3/4 SA-3 3/4 SA-3L 1 EDP No. Single Double Cut Cut 59715 59500 59816 59501 59817 59502 59818 59503 59716 59504 59717 59505 59718 59506 59719 59507 59720 59508 Dia. 1/8 1/8 5/32 3/16 1/4 1/4 5/16 3/8 3/8 Tool Lgth. of No. Cut (in) SB-11 1/2 SB-12 5/8 SB-13 5/8 SB-14 5/8 SB-1 5/8 SB-1L 1 SB-2 3/4 SB-3 3/4 SB-3L 1 EDP No. Single Double Cut Cut 59825 59875 59826 59876 59827 59877 59828 59878 59829 59879 59830 59880 59831 59881 59832 59882 59833 59883 Dia. 1/8 1/8 5/32 3/16 1/4 1/4 5/16 3/8 3/8 Tool Lgth. of No. Cut (in) SC-11 1/2 SC-12 5/8 SC-13 5/8 SC-14 5/8 SC-1 5/8 SC-1L 1 SC-2 3/4 SC-3 3/4 SC-3L 1 EDP No. Single Double Cut Cut 59724 59536 59843 59537 59844 59538 59845 59539 59846 59540 59725 59541 59726 59542 59847 59543 59727 59544 Cylinder Shape With radius End Prod. Pipe Tap Pipe Ent. No. Size (in) Size (in) ATCG48 ATCG50 ATCG52 ATCG54 ATCG56 ATCG58 ATCG60 ATCG62 ATCG64 ATCG66 ATCG68 ATCG70 ATCG72 ATCG76 ATCG80 ATCG88 ATCG92 ATCG96 1/4" Shank Cylinder Shape With End Cut Carbide Grit Hole Saws Diameter (in) (mm) Morse Premium Carbide burrs Cylinder Shape No End Cut SCFTCG4-M SOTCG4-F SOTCG4-M SOTCG4-C bUrrS 4 Morse® ball Shape Dia. 1/8 3/16 1/4 5/16 3/8 7/16 Tool Lgth. of No. Cut (in) SD-11 3/32 SD-14 1/8 SD-1 1/4 SD-2 1/4 SD-3 5/16 SD-4 3/8 WWW.HANESSUPPLY.COM EDP No. Single Double Cut Cut 59731 59554 59732 59555 59733 59556 59734 59557 59735 59558 59853 59559 3/8 7/16 1/2 5/8 3/4 3/4 3/4 7/8 1 Tool No. SA-3X SA-4 SA-5 SA-6 SA-15 SA-16 SA-7 SA-8 SA-9 Lgth. of Cut (in) EDP No. Single Double Cut Cut 3/8 7/16 1/2 5/8 3/4 3/4 3/4 7/8 1 Dia. Tool No. SB-3X SB-4 SB-5 SB-6 SB-15 SB-16 SB-7 SB-8 SB-9 Lgth. of Cut (in) EDP No. Single Double Cut Cut 3/8 7/16 1/2 5/8 3/4 3/4 3/4 1 Dia. Tool No. SC-3X SC-4 SC-5 SC-6 SC-15 SC-16 SC-7 SC-9 Lgth. of Cut (in) EDP No. Single Double Cut Cut Dia. Tool No. Lgth. of Cut (in) EDP No. Single Double Cut Cut Dia. 1/2 5/8 3/4 1 SD-5 SD-6 SD-7 SD-9 1-1/2 1 1 1 1/2 3/4 1 1 1 1-1/2 1 1 1 1/2 3/4 1 1 1 1-1/2 1 1 1 1/2 3/4 1 1 7/16 9/16 11/16 15/16 59819 59820 59721 59722 59821 59723 59822 59823 59824 59834 59835 59836 59837 59838 59839 59840 59841 59842 59848 59849 59728 59729 59850 59730 59851 59852 59736 59737 59738 59854 59509 59510 59511 59512 59513 59516 59517 59518 59519 59884 59885 59886 59887 59888 59889 59890 59891 59892 59545 59546 59547 59548 59550 59549 59551 59552 59560 59561 59562 59563 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Morse ® Oval Shape Tool Lgth. of No. Cut (in) SE-11 5/16 SE-1 3/8 SE-3 3/4 Tree Shape radius End Dia. 1/8 1/4 3/8 7/16 1/2 Tool Lgth. of No. Cut (in) SF-11 1/2 SF-1 5/8 SF-3 3/4 SF-4 1 SF-13 3/4 Tree Shape radius End Dia. 1/4 5/16 3/8 1/2 Lgth. of Tool No. Cut (in) SG-1 5/8 SG-2 3/4 SG-3 3/4 SG-13 3/4 Flame Shape Dia. 1/4 5/16 1/2 Tool No. SH-1 SH-2 SH-5 Lgth. of Cut (in) 5/8 3/4 1-1/4 60° Cone Shape Dia. 1/4 3/8 1/2 Tool No. SJ-1 SJ-3 SJ-5 Lgth. of Cut (in) 3/16 5/16 7/16 90° Cone Shape Dia. 1/4 3/8 1/2 Tool No. SK-1 SK-3 SK-5 Lgth. of Cut (in) 1/8 3/16 1/4 EDP No. Single Double Cut Cut 59739 59564 59740 59565 59741 59566 EDP No. Single Double Cut Cut 59855 59570 59745 59571 59746 59572 59856 59573 59857 59575 EDP No. Single Double Cut Cut 59750 59580 59751 59581 59752 59582 59753 59583 EDP No. Single Double Cut Cut 59774 59780 59775 59781 59776 59782 EDP No. Single Double Cut Cut 59861 59793 59862 59794 59863 59795 EDP No. Single Double Cut Cut 59867 59800 59868 59801 59869 59802 Taper Shape radius End 14° Included Angle Dia. 1/4 5/16 3/8 Tool No. SL-1 SL-2 SL-3 Lgth. of Cut (in) 5/8 7/8 1-1/16 EDP No. Single Double Cut Cut 59757 59605 59758 59606 59759 59607 Dia. 1/2 5/8 3/4 Dia. 1/2 5/8 3/4 3/4 Dia. 1/2 5/8 3/4 3/4 Dia. 5/8 3/4 Dia. 5/8 3/4 1 Dia. 5/8 3/4 1 Dia. 1/2 5/8 5/8 3/4 Tool No. SE-5 SE-6 SE-7 Tool No. SF-5 SF-6 SF-14 SF-15 Tool No. SG-5 SG-6 SG-7 SG-15 Tool No. SH-6 SH-7 Tool No. SJ-6 SJ-7 SJ-9 Tool No. SK-6 SK-7 SK-9 Tool No. SL-4 SL-5 SL-6 SL-7 Lgth. of Cut (in) 7/8 1 1 Lgth. of Cut (in) 1 1 1-1/4 1-1/2 Lgth. of Cut (in) 1 1 1 1-1/2 Lgth. of Cut (in) 1-7/16 1-5/8 Lgth. of Cut (in) 9/16 11/16 15/16 Lgth. of Cut (in) 5/16 3/8 1/2 Lgth. of Cut (in) 1-1/8 1-3/16 1-5/16 1-1/2 EDP No. Single Double Cut Cut 59742 59743 59744 59567 59568 59569 EDP No. Single Double Cut Cut 59747 59748 59749 59859 59574 59576 59578 59579 EDP No. Single Double Cut Cut 59754 59755 59756 59860 59584 59585 59586 59587 EDP No. Single Double Cut Cut 59777 59778 59783 59784 EDP No. Single Double Cut Cut 59864 59865 59866 59796 59797 59798 EDP No. Single Double Cut Cut 59870 59871 59872 59803 59804 59805 EDP No. Single Double Cut Cut 59760 59873 59761 59762 59608 59609 59610 59611 Dia. 1/4 1/4 1/4 3/8 1/2 5/8 Incl. Lgth. of Tool No. Angle (°) Cut (in) SM-1 22 1/2 SM-2 14 3/4 SM-3 10 1 SM-4 28 5/8 SM-5 31 7/8 SM-6 16 1 EDP No. Single Double Cut Cut 59763 59612 59764 59613 59765 59614 59766 59615 59767 59616 59768 59617 Dia. 1/4 3/8 1/2 5/8 3/4 Tool No. SN-1 SN-2 SN-4 SN-6 SN-7 EDP No. Single Double Cut Cut 59769 59618 59770 59619 59771 59620 59772 59621 59773 59622 Inverted Cone Shape Incl. Lgth. of Angle (°) Cut (in) 10 5/16 13 3/8 28 1/2 18 3/4 30 5/8 22 Cutting Tools Dia. 3/16 1/4 3/8 Cone Shape Nonferrous burrs 1/4" Shank USE: NF Burrs are designed for use on aluminum, non-ferrous metals, soft steel, reinforced plastics and other soft materials. High flute design for easy chip flow and fast stock removal. Provides excellent work finish with minimum loading when cutting soft, sticky metals. Cylinder Shape Dia. 1/4 3/8 1/2 Tool No. SA-1-NF SA-3-NF SA-5-NF Lgth. of Cut (in) 3/4 3/4 1 EDP No. 59625 59626 59627 Dia. 5/8 3/4 3/4 Tool No. SA-6-NF SA-7-NF SA-7-NF 3/8 Lgth. of Cut (in) 1 1 1 EDP No. 59628 59629 59810* Lgth. of Cut (in) 3/4 3/4 1 EDP No. 59630 59631 59632 Dia. 5/8 3/4 3/4 Tool No. SC-6-NF SC-7-NF SC-7-NF 3/8 Lgth. of Cut (in) 1 1 1 EDP No. 59633 59634 59811* Lgth. of Cut (in) 3/16 5/16 7/16 EDP No. 59635 59636 59637 Dia. 5/8 3/4 3/4 Tool No. SD-6-NF SD-7-NF SD-7-NF 3/8 Lgth. of Cut (in) 9/16 11/16 11/16 EDP No. 59638 59639 59812* Lgth. of Cut (in) 5/8 7/8 1 EDP No. 59640 59641 59642 Dia. 3/4 3/4 Tool No. SE-7-NF SE-7-NF 3/8 Lgth. of Cut (in) 1 1 EDP No. 59643 59813* Lgth. of Cut (in) 3/4 3/4 1 EDP No. 59644 59645 59646 Tool Lgth. of No. Cut (in) SF-6-NF 1 SF-14-NF 1-1/4 SF-14-NF 3/8 1-1/4 EDP No. 59647 59648 59814* *Note: Tool no. indicated with 3/8 are furnished with 3/8" shank. Cylinder Shape radius End Dia. 1/4 3/8 1/2 Tool No. SC-1-NF SC-3-NF SC-5-NF *Note: Tool no. indicated with 3/8 are furnished with 3/8" shank. ball Shape Dia. 1/4 3/8 1/2 Tool No. SD-1-NF SD-3-NF SD-5-NF *Note: Tool no. indicated with 3/8 are furnished with 3/8" shank. Oval Shape Dia. 3/8 1/2 5/8 Tool No. SE-3-NF SE-5-NF SE-6-NF *Note: Tool no. indicated with 3/8 are furnished with 3/8" shank. Tree Shape radius End Dia. 1/4 3/8 1/2 Tool No. SF-1-NF SF-3-NF SF-5-NF Dia. 5/8 3/4 3/4 *Note: Tool no. indicated with 3/8 are furnished with 3/8" shank. WWW.HANESSUPPLY.COM 22 - 47 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Morse® Premium Carbide burrs Taper Shape radius End 14° Included Angle Dia. 3/8 1/2 5/8 Tool No. SL-3-NF SL-4-NF SL-5-NF Lgth. of Cut (in) 1-1/16 1-1/8 1-3/16 EDP No. 59649 59650 59651 Dia. 5/8 3/4 3/4 Tool No. SL-6-NF SL-7-NF SL-7-NF 3/8 *Note: Tool no. indicated with 3/8 are furnished with 3/8" shank. Long Shank Premium Carbide burrs 1/4" Diameter – 6" Long Steel Shank Cylinder Shape Dia. 1/4 3/8 1/2 Tool No. SA-1L6 SA-3L6 SA-5L6 Lgth. of Cut (in) 1/2 3/4 1 EDP No. 59655 59656 59657 Dia. 1/4 3/8 1/2 Tool No. SC-1L6 SC-3L6 SC-5L6 Lgth. of Cut (in) 1/2 3/4 1 EDP No. 59658 59659 59660 Dia. 1/4 3/8 1/2 Tool No. SD-1L6 SD-3L6 SD-5L6 Lgth. of Cut (in) 3/16 5/16 7/16 EDP No. 59661 59662 59663 Lgth. of Cut (in) 3/8 5/8 7/8 EDP No. 59664 59665 59666 Cylinder Shape - radius End ball Shape Oval Shape Dia. 1/4 3/8 1/2 Tool No. SE-1L6 SE-3L6 SE-5L6 Lgth. of Cut (in) 1-5/16 1-1/2 1-1/2 EDP No. 59652 59653 59815* 1/4" Diameter - 1/8" Steel Shank EDP No 59678 59679 59680 59681 59682 59683 59684 59685 59686 Dia. 1/4 3/8 1/2 Tool No. SF-1L6 SF-3L6 SF-5L6 EDP No. 59667 59668 59669 Tree Shape – Pointed End Dia. 1/4 3/8 1/2 Tool No. SG-1L6 SG-3L6 SG-5L6 Flame Shape Dia. 5/16 1/2 Tool No. SH-2L6 SH-5L6 Lgth. of Cut (in) 1/2 3/4 1 1/8" Steel Shank EDP No. 59688 59689 59713 59690 59691 59692 59693 59694 59695 22 - 48 Tool No. SL-1L6 SL-3L6 SL-4L6 Tool No. SC-53 SD-53 SA-41 SA-43 SA-42 SC-42 SC-41 SD-42 SE-41 Lgth. of Cut (in) 3/4 7/8 Lgth. of Cut (in) 3/8 5/8 7/8 EDP No. 59673 59674 EDP No. 59675 59676 59677 59681 59684 59679 59682 59685 59680 59683 59686 Dia. 3/16 3/16 1/16 1/8 3/32 1/8 3/32 1/8 1/8 L.O.C. 1/2 5/32 1/4 5/8 1/2 5/8 1/2 1/8 3/16 EDP No. 59696 59697 59698 59699 59700 59701 59702 59703 59714 59688 Tool No. SF-41 SG-41 SJ-42 SL-41 SH-41 SN-42 SK-42 SB-41 SB-43 Dia. 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 L.O.C. 1/4 1/4 3/16 13/32 3/16 1/8 1/8 1/8 5/8 59696 59689 59697 59713 59698 59690 59699 59691 59700 59692 59701 59693 59702 59703 59694 59714 59695 Premium Carbide burrs 1/4" Shanks - 2" O.A.L. EDP No. 59504 59704 59706 59565 59571 59580 Tool No. SA-1 SA-14 SC-14 SE-1 SF-1 SG-1 59504 Taper Shape radius End – 14° Dia. 1/4 3/8 1/2 EDP No. 59670 59671 59672 59678 Premium Carbide burrs Tree Shape – radius End Lgth. of Cut (in) 1/2 3/4 1 Tool No. L.O.C. SA-51 1/2 SB-51 1/4 SC-51 1/2 SD-51 1/4 SE-51 3/8 SF-51 1/2 SG-51 1/2 SM-51 1/2 SN-51 1/4 59704 Dia.(in) 1/4 3/16 3/16 1/4 1/4 1/4 L.O.C. 5/8 1/2 1/2 3/8 5/8 5/8 EDP No. 59707 59605 59708 59618 59709 59710 Tool No. SJ-1 SL-1 SH-1 SN-1 SK-1 SQ-1 59707 59705 59706 59708 59565 59618 59571 59709 59580 59710 WWW.HANESSUPPLY.COM Dia.(in) 1/4 1/4 1/4 1/4 1/4 1/4 L.O.C. 60° 1/2 3/8 1/4 82° 1/4 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Morse /Oldham ® Solid Carbide burr Sets Oldham • Supplied in a premium hardwood case. CIrCULAr SAW bLADES Contractor Carbide: 22 TM Set No. C-300 C-100 Dia. 1/4 1/8 59903 59905 59907 59909 59911 59913 59915 59917 59918 59919 C-350 C-400 C-450 C-500 C-550 C-600 C-650 C-700 C-725 C-750 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 59901 59712 C-150 C-200 Includes SA-51, SB-51, SC-51, SD-51, SE-51, SF-51, SG-51, SM-51, SN-51 SA-43, SA-42, SC-42, SC-41, SD-42, SE-41, SF-41, SG-41, SJ-42, SL-41, SH-41, SN42 SA-42, SA-43, SC-42, SC-41, SF-42, SG-42, SM-43, SE-41, SD-42 SA-1, SA-14, SC-1, SC-14, SD-1, SE-1, SF-1, SG-1, SK-1, SL-1, SH-1, SN-1 SA-51, SC-51, SF-51, SG-51, SM-51, SD-51 SA-1, SC-1, SF-1, SG-1, SM-2, SE-1, SL-1, SD-1 SA-5, SC-5, SF-5, SG-5, SM-5, SE-5, SL-4, SD-5 SA-5, SC-5, SD-5, SE-5, SG-5, SM-5, SL-4, SH-5 SA-5, SC-1, SC-3, SD-3, SE-5, SH-5, SK-5, SG-1 SA-1, SA-5, SC-1, SC-3, SC-5, SF-5, SL-3, SL-4 SB-1, SC-3, SD-2, SE-5, SF-5, SL-4, SG-3, SM-5 SA-1, SA-3, SA-5, SC-1, SC-3, SC-5, SF-1, SF-3, SF-5 SA-5, SC-3, SC-5, SD-5, SF-3, SF-5, SG-3, SL-4 SA-1, SA-3, SA-5, SC-1, SC-3, SC-5, SD-3, SD-5, SE-3, SF-1, SF-3, SF-5, SG-1, SG-3, SL-3,SL-4 1/8 1/4 Solid Carbide burrs burr Application Data Style of Cut Single Double NF Style Aluminum • Brass, Copper • • Material Cast Iron Plastics • • • recommended Cutting Speeds Burr Dia. (in) 1/16 3/32 1/8 3/16 1/4 5/16 Burr Dia. (in) R.P.M. 55000-85000 50000-60000 35000-65000 30000-55000 25000-50000 18000-38000 3/8 7/16 1/2 5/8 3/4 1 Increase speeds for softer nonferrous materials. Decrease speeds for harder nonferrous materials. Steel-Up To 40-60 Rc • • Titanium • • Zinc • R.P.M. 17000-38000 13000-37000 14000-36000 11000-23000 8000-19000 7000-18000 Flute/Cut Styles of burrs Double Cut - Most popular cut style. Creates a small chip. Ensures rapid stock removal. Single Cut - For general purpose cutting. Offers good stock removal and smooth finish. Combination Carbide Cutting Tools EDP 59687 59711 Part No. 338-C424 438-C418 450-C418 538-C424 550-C424 650-C418 725-C424 800-C424 825-C424 900-C428 100-C440 Diameter (in) (mm) 3-3/8 86 4-3/8 111 4-1/2 114 5-3/8 114 5-1/2 140 6-1/2 165 7-1/4 184 8 203 8-1/4 210 9 229 10 254 No. of Teeth 24 18 18 24 24 18 24 24 24 28 40 Arbor 15MM 20MM 3/8 10MM 5/8 UNIV. UNIV. UNIV UNIV. 5/8 5/8 Plate Thickness .040 .040 .040 .040 .040 .040 .040 .060 .060 .060 .060 Kerf .070 .070 .070 .070 .070 .070 .070 .090 .090 .090 .090 Hook Angle 15° 20° 20° 20° 20° 15° 12° 20° 20° 20° 20° Part No. 550-C418 725-C418 100-C424 Diameter (in) (mm) 5-1/2 140 7-1/4 184 10 254 No. of Teeth 18 18 24 Arbor 5/8 UNIV. 5/8 Plate Thickness .040 .040 .060 Kerf .070 .070 .090 Hook Angle 20° 20° 15° General Purpose Carbide Finishing Carbide Part No. 600-C430 725-C436 800-C440 825-C440 850-C440 100-C460 120-C460 Diameter (in) (mm) 6 152 7-1/4 184 8 203 8-1/4 210 8-1/2 216 10 254 12 305 No. of Teeth 30 36 40 40 40 60 60 Arbor 5/8" UNIV. UNIV. UNIV. 5/8" 5/8" 1" Plate Thickness .040 .040 .060 .060 .060 .060 .075 Kerf .070 .070 .090 .090 .090 .090 .105 Hook Angle 20° 15° 20° 20° 20° 12° -5° Part No. 850-C460 100-C480 120-C480 Diameter (in) (mm) 8-1/2 216 10 254 12 305 No. of Teeth 60 80 80 Arbor 5/8" 5/8" 1" Plate Thickness .060 .060 .075 Kerf .090 .090 .105 Hook Angle 20° 20° -5° Part No. 725-C418D Diameter (in) (mm) 7-1/4 184 No. of Teeth 18 Arbor UNIV. Plate Thickness .040 Kerf .070 Hook Angle 15° Precision Finishing Carbide Deck Nonferrous Cut High flute design for easy chip flow and fast stock removal. Provides minimum loading when cutting soft, sticky metals. WWW.HANESSUPPLY.COM 22 - 49 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Oldham rip Saws - Carbide WIzArD ELITE Rip saws are designed to cut material with the grain, in both soft and hard woods. Can be used with manual or power feed saws at various speeds. Each saw blade is designed for three specific saws; Mitre box, radial Arm and Table Saw Table Saw Teflon Coated - Carbide In a table saw, the motor and blade remain stationary, and the material moves into the blade. The flat, table-like top creates a surface on which to feed the material. This 40-tooth, alternate top bevel carbide blade uses a 12° positive hook angle to give the user maximum versatility in material feeding, an especially important feature for cutting woods of various thickness and hardness. This blade is guaranteed to be the smoothest cutting blade ever used on a table saw. Part No. 800-7740T 825-7740T 100-7740T Diameter (in) (mm) 8 203 8-1/4 210 10 254 No. of Teeth 40 40 40 radial Arm Saw Arbor UNIV. UNIV. 5/8" Plate Thickness .070 .070 .090 Kerf .100 .100 .120 Hook Angle 10° 12° 12° Teflon Coated - Carbide The Radial Arm saw is a pendulum-style saw, where both the blade and motor are mounted above the work station. As the blade and motor move, the material remains stationary. Therefore, feed is the critical element of safe and easy operation. This 60-tooth carbide blade features a 5° negative hook angle and triple chip tooth sharpening. It will not feed itself, so the user maintains maximum control over the feed of cut. This blade is guaranteed to be the smoothest cutting blade ever used on a radial arm saw. Part Diameter No. (in) (mm) 800-P8160T 8 203 825-P8160T 8-1/4 210 850-P8160T 8-1/2 216 100-PB160T 10 254 120-P8160T 12 305 140-P8160T 14 356 Mitre box Saw No. of Plate Teeth Arbor Thickness 60 UNIV. .060 60 UNIV. .060 60 5/8" .060 60 5/8" .070 60 1" .075 60 25mm/1" .090 Kerf .090 .090 .090 .100 .105 .012 Hook Angle -5° -5° -5° -5° -5° -5° Teflon Coated - Carbide Mitre Box saws feature a blade and motor mounted on a moving arm. The material is held in place while the blade and motor move to it. Since the mitre box is strictly a cutoff saw, we have designed these 60- and 80-tooth alternate top bevel carbide blades with a 12° positive hook angle to deliver precision smooth cuts and chip out free edges in nearly any material. This blade is guaranteed to be the smoothest cutting blade ever used on a mitre box saw. Part No. 800-7260T 825-7360T 900-7260T 100-7280T 120-7280T 140-7280T 150-7280T Diameter (in) (mm) 8 203 8-1/4 210 9 229 10 254 12 305 14 356 15 381 No. of Plate Teeth Arbor Thickness 60 UNIV. .080 60 UNIV. .080 60 5/8" .090 80 5/8" .090 80 1" .096 80 25mm/1" .090 80 1" .090 PrOFESSIONAL SErIES Kerf .110 .110 .120 .120 .126 .120 .120 Hook Angle 12° 12° 12° 12 12° 12° 12° 22 - 50 No. of Teeth 12 14 16 18 24 24 Arbor UNIV. UNIV. UNIV. 5/8 5/8 1 Plate Thickness .080 .080 .080 .090 .090 .096 No. of Plate Teeth Arbor Thickness 24 UNIV. .080 24 5/8 .090 30 1 .096 36 25mm/1 .100 36 25mm/1 .100 Kerf .120 .120 .120 .130 .130 .136 Hook Angle 12° 12° 12° 12° 12° 12° Kerf .120 .130 .136 .140 .140 Hook Angle 30° 30° 30° 30° 30° This heavy-gauge carbide is designed for tough cutting jobs such as: used lumber or flooring with embedded nails and concrete-coated forming material. A special negative rake provides strength plus safety. (Feed with smooth, even pressure.) Part No. 650-6812 725-6814 800-6818 100-6824 120-6824 Diameter (in) (mm) 6-1/2 165 7-1/4 184 8 203 10 254 12 305 No. of Teeth 12 14 18 24 24 Arbor UNIV. UNIV. UNIV. 5/8 1 Plate Thickness .080 .080 .080 .090 .096 Non-Ferrous Metal - Carbide Kerf .120 .120 .120 .130 .136 Hook Angle -5° -5° -5° -5° -5° Designed to cut all types of aluminum sheets, tubing extrusions and other non-ferrous metals such as copper, brass, leads and magnesium. It is recommended that some type of lubricant be used with this blade, preferably a stick wax and that both ends of the material being cut are securely clamped in place before cutting. Diameter Part No. (in) (mm) 725-P7540 7-1/4 184 850-P7548 8-1/2 216 800-P7560 8 203 900-P7560 9 229 100-P7560 10 254 120-P7560 12 305 140-P7560 14 356 100-P7580 10 254 120-P7580 12 305 140-P7580 14 356 140-P75100 14 356 150-P75100 15 381 160-P75100 16 406 No. of Teeth 40 48 60 60 60 60 60 80 80 80 100 100 100 Plate Arbor Thickness UNIV. .060 5/8 .070 UNIV. .070 5/8 .090 5/8 .090 1 .096 25mm/1 .100 5/8 .090 1 .096 25mm/1 .100 25mm/1 .109 1 .090 25mm/1 .109 Kerf .100 .110 .110 .130 .130 .136 .140 .130 .136 .140 .149 .130 .149 Framing Combination - Carbide Hook Angle 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° For fast cutoffs and rips in all types of wood, finished plywood and prefinished materials materials. Very good all-purpose. Part No. 650-7424 700-7424 725-7424 800-7424 Diameter (in) (mm) 6-1/2 165 7 178 7-1/4 184 8 203 No. of Teeth 24 24 24 24 Arbor UNIV. UNIV. UNIV. UNIV. Plate Thickness .054 .054 .054 .070 roofer’s Special - Carbide Kerf .100 .100 .100 .110 Hook Angle 12° 12° 12° 12° For rough cutting through tar paper, shingles and related roofing materials with embedded nails. The special anti-stick coating allows the blade to cut without binding or sticking. (Clean blade with solvent after each use.) Diameter (in) (mm) 7-1/4 184 No. of Teeth 14 Arbor UNIV. Plate Thickness .080 Emergency Cutting - Carbide For general purpose ripping and crosscutting on wood, exterior plywood and related materials. Special heavy gauge for greater durability. Diameter (in) (mm) 6-1/2 165 7-1/4 184 8 203 9 229 10 254 12 305 Diameter (in) (mm) 8 203 10 254 12 305 14 356 16 406 Nail Cutting Saws - Carbide Part No. 725-6914 Contractor’s Special - Carbide Part No. 650-7312 725-7314 800-7316 900-7318 100-7324 120-7324 Part No. 800-7024 100-7024 120-7030 140-7036 160-7036 Kerf .120 Hook Angle -5° Used extensively by fire departments and demolition teams for cutting through large sections of buildings. Will cut most building materials, including tar paper, roofing, nails and non-ferrous materials. Part Diameter No. of Plate Hook No. (in) (mm) Teeth Arbor Thickness Kerf Angle 120-7812 12 305 12 20mm / 1" / 7/8" .096 .136 -5° 120-7824 12 305 24 20mm / 1" / 7/8" .096 .136 -5° 140-7824 14 356 24 20mm / 1" / 7/8" .120 .160 -5° The following warning has been issued by OSHA. Do not use this blade on multi-purpose cutoff saws, including gas power saws, unless saw has guard that completely covers both the upper half and the lower half of the blade. This guard must extend to the lowest point of the cutting teeth on the bottom of the blade. Be sure to read owner's manual of the saw and follow all instructions and safety procedures. Always wear safety goggles. Consult owner’s manual. WWW.HANESSUPPLY.COM Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Oldham/Relton Plastic/Hardwoods - Carbide The ideal cutting saw when smooth, chip-free edges are demanded. Excellent for cutting all types of plastics, polystyrene, Plexiglass, Formica, Corian and related materials. Also excellent for general rip and cut-off work in hardwood and wood-related products. TM No. of Teeth 40 40 60 60 60 60 60 80 80 80 80 100 100 Arbor UNIV. 5/8 UNIV. UNIV. 5/8 5/8 1 5/8 1 25mm/1 25mm/1 25mm/1 25mm/1 Plate Thickness .060 .090 .060 .070 .090 .090 .096 .090 .096 .100 .100 .109 .109 Hook Angle 12° 12° 12° 12° 12° 12° 12° 12° 12° 12° 12° 12° 12° Kerf .100 .130 .100 .110 .130 .130 .136 .130 .136 .140 .140 .149 .149 ELECTrIC HAMMEr bITS SDS-max SDS-max Quik-Lok Masonry Tools TM Part No. Description Wt. (lbs) QL-MX SDS-max to SDS+ 1.4 Accepts SDS+ shank bits available Hammer bits Point Dia. (in) 3/8 3/8 3/8 7/16 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 5/8 5/8 5/8 5/8 5/8 11/16 11/16 3/4 3/4 3/4 3/4 3/4 13/16 13/16 O.A. Lgth. (in) 10 14 18 14 14 18 22 28 42 14 18 22 28 14 18 22 28 42 14 22 14 18 22 28 42 14 22 Drilling Depth (in) 4 8 12 8 8 12 16 22 36 8 12 16 22 8 12 16 22 36 8 16 8 12 16 22 36 8 16 Adaptor Part No. MX-6-10 MX-6-14 MX-6-18 MX-7-14 MX-8-14 MX-8-18 MX-8-22 MX-8-28* MX-8-42* MX-9-14 MX-9-18 MX-9-22 MX-9-28* MX-10-14 MX-10-18 MX-10-22 MX-10-28* MX-10-42* MX-11-14 MX-11-22 MX-12-14 MX-12-18 MX-12-22 MX-12-28* MX-12-42* MX-13-14 MX-13-22 Wt. (lbs) 0.8 0.8 0.9 0.8 0.9 1.1 1.2 1.4 1.9 1.0 1.1 1.3 1.5 1.1 1.3 1.4 1.6 2.8 1.1 1.6 1.2 1.5 1.7 2.0 3.5 1.9 1.3 Point Dia. (in) 27/32 27/32 7/8 7/8 7/8 7/8 7/8 1 1 1 1 1 1-1/8 1-1/8 1-1/8 1-1/8 1-1/4 1-1/4 1-1/4 1-1/4 1-3/8 1-3/8 1-1/2 1-1/2 1-1/2 1-1/2 O.A. Lgth. (in) 14 22 14 18 22 28 42 14 18 22 28 42 14 22 28 42 14 22 28 42 22 42 14 22 28 42 Drilling Depth (in) 8 16 8 12 16 22 36 8 12 16 22 36 8 16 22 36 8 16 22 36 16 36 8 16 22 36 Part No. Wt. (lbs) MX-13A-14 1.9 MX-13A-22 1.4 MX-14-14 1.8 MX-14-18 2.1 MX-14-22 2.6 MX-14-28* 4.6 MX-14-42* 1.7 MX-16-14 2.2 MX-16-18 2.6 MX-16-22 3.1 MX-16-28* 6.0 MX-16-42* 1.9 MX-18-14* 3.0 MX-18-22* 3.9 MX-18-28* 7.4 MX-18-42* 2.2 MX-20-14* 3.4 MX-20-22* 4.1 MX-20-28* 4.3 MX-20-42* 9.2 MX-22-22* 4.1 MX-22-42* 11.3 MX-24-14* 2.9 MX-24-22* 4.8 MX-24-28* 6.2 MX-24-42* 13.4 * Bulk quantities not available from immediate stock... may be special-ordered. TM Part No. Description Wt. (lbs) QL-202 Spline Drive to SDS+ 1.4 Hammer bits Point Overall Drilling Lgth. Depth Dia. (in) (in) (in) relton Spline Drive QUIk-LOk Adaptor 3/8 3/8 3/8 7/16 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 5/8 5/8 5/8 5/8 5/8 11/16 11/16 3/4 3/4 3/4 3/4 3/4 13/16 13/16 10 14 18 14 14 18 22 28 42 14 18 22 28 14 18 22 28 42 14 22 14 18 22 28 42 14 22 4 8 12 8 8 12 16 22 36 8 12 16 22 8 12 16 22 36 8 16 8 12 16 22 36 8 16 Accepts SDS+ shank bits available Part No. 202-6-10 202-6-14 202-6-18 202-7-14 202-8-14 202-8-18 202-8-22 202-8-28* 202-8-42* 202-9-14 202-9-18 202-9-22 202-9-28* 202-10-14 202-10-18 202-10-22 202-10-28* 202-10-42* 202-11-14 202-11-22 202-12-14 202-12-18 202-12-22 202-12-28* 202-12-42* 202-13-14 202-13-22 Wt. (lbs) 0.8 0.8 0.9 0.8 1.0 1.1 1.2 1.4 1.9 0.9 1.1 1.3 1.5 1.1 1.3 1.4 1.6 2.8 1.1 1.6 1.2 1.5 1.8 2.0 3.5 1.3 1.9 Point Overall Drilling Lgth. Depth Dia. (in) (in) (in) 27/32 27/32 7/8 7/8 7/8 7/8 7/8 1 1 1 1 1 1-1/8 1-1/8 1-1/8 1-1/8 1-1/4 1-1/4 1-1/4 1-1/4 1-3/8 1-3/8 1-1/2 1-1/2 1-1/2 1-1/2 14 22 14 18 22 28 42 14 18 22 28 42 14 22 28 42 14 22 28 42 22 42 14 22 28 42 8 16 8 12 16 22 36 8 12 16 22 36 8 16 22 36 8 16 22 36 16 36 8 16 22 36 Part No. Wt. (lbs) 202-13A-14 1.3 202-13A-22 1.9 202-14-14 1.4 202-14-18 1.8 202-14-22 2.1 202-14-28* 2.6 202-14-42* 4.6 202-16-14 1.7 202-16-18 2.2 202-16-22 2.6 202-16-28* 3.1 202-16-42* 6.0 202-18-14* 1.9 202-18-22* 3.1 202-18-28* 3.9 202-18-42* 7.4 202-20-14* 2.3 202-20-22* 3.6 202-20-28* 4.3 202-20-42* 9.2 202-22-22* 4.1 202-22-42* 11.3 202-24-14* 2.9 202-24-22* 4.8 202-24-28* 6.2 202-24-42* 13.4 * Bulk quantities not available from immediate stock... may be special-ordered. SDS+ Masonry Tools Hammer bits Point Overall Drilling Dia. Lgth. Depth (in) (in) (in) 5/32 5/32 5/32 3/16 3/16 3/16 3/16 3/16 7/32 7/32 7/32 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 7/16 7/16 4-1/2 6 8 4-1/2 6 8 10 14 6 10 16 4 6 8 10 14 20 6 10 14 6 10 14 18 25 6 12 2-1/2 4 6 2-1/2 4 6 8 12 4 8 14 2 4 6 8 12 18 4 8 12 4 8 12 16 22 4 10 Part No. 207-1-4 207-1-6 207-1-8 207-3-4 207-3-6 207-3-8 207-3-10 207-3-14* 207-2-6 207-2-10 207-2-16* 207-4-4 207-4-6 207-4-8 207-4-10 207-4-14* 207-4-20* 207-5-6 207-5-10 207-5-14* 207-6-6 207-6-10 207-6-14* 207-6-18* 207-6-25* 207-7-6 207-7-12* Wt. (lbs) 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.1 0.3 0.5 0.1 0.1 0.2 0.3 0.3 0.4 0.2 0.3 0.3 0.2 0.3 0.4 0.5 0.7 0.3 0.5 * Bulk quantities not available from immediate stock... may be special-ordered. WWW.HANESSUPPLY.COM Point Overall Drilling Dia. Lgth. Depth (in) (in) (in) 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 5/8 5/8 5/8 5/8 11/16 11/16 3/4 3/4 3/4 3/4 27/32 7/8 7/8 7/8 1 1 1 1-1/8 1-1/8 6 10 14 18 25 6 12 18 25 8 14 18 25 10 25 8 14 18 25 8 8 14 18 8 18 25 8 18 4 8 12 16 22 4 10 16 22 6 12 16 22 8 22 6 12 16 22 6 6 12 16 6 16 22 6 16 Part No. 207-8-6 207-8-10 207-8-14* 207-8-18* 207-8-25* 207-9-6 207-9-12* 207-9-18* 207-9-25* 207-10-8 207-10-14* 207-10-18* 207-10-25* 207-11-10* 207-11-25* 207-12-8 207-12-14* 207-12-18* 207-12-25* 207-13A-8* 207-14-8* 207-14-14* 207-14-18* 207-16-8* 207-16-18* 207-16-25* 207-18-8* 207-18-18* Wt. (lbs) 0.3 0.4 0.6 0.8 0.9 0.3 0.6 0.8 1.0 0.5 0.8 0.9 1.3 0.6 1.5 0.6 1.0 1.3 1.7 0.8 0.8 1.4 1.7 1.0 2.3 2.8 1.3 3.0 22 - 51 22 Cutting Tools Part Diameter No. (in) (mm) 725-P7240 7-1/4 184 10 254 100-P7240 725-P7260 7-1/4 184 800-P7260 8 203 9 229 900-P7260 100-P7260 10 254 120-P7260 12 305 100-P7280 10 254 120-P7280 12 305 140-P7280 14 356 160-P7280 16 406 356 140-P72100 14 160-P72100 16 406 Spline Drive Masonry Tools Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Relton Screw-Type Anchor bits Hammer Core bits Core bits - 6" OAL, 4-1/2" Core depth Dia. (in) 1-3/4 2 2-1/2 2-3/4 3 3-1/2 4 4-1/2 5 Part No. CBT-28 CBT-32 CBT-40 CBT-44 CBT-48 CBT-56 CBT-64 CBT-72 CBT-80 Starter Points Wt. (lbs) 1.8 2.4 3.7 4.4 4.9 6.3 7.8 9.3 11.2 To fit this Bit Dia. 1-3/4 2 2-1/2 2-3/4 3 3-1/2 4 4-1/2 5 Heavy-Duty design. Less breakage of shank and core bit. Carbide can be replaced or sharpened. Part No. CBSP-28 CBSP-32 CBSP-40 CBSP-44 CBSP-48 CBSP-56 CBSP-64 CBSP-72 CBSP-80 TC bits meet or exceed all specifications established by manufacturers of screw type masonry anchors. Recommended for use with Tapcon® anchors or other screw-type anchors requiring 5/32" or 3/16" tip diameters Wt. (lbs) 0.4 0.6 0.6 0.8 0.9 0.9 0.9 1.1 1.1 Heat-Treated, SpringLoaded Starter Point Insert taper end of shank into core bit. Slide starter point into core body (starter point will be loose fitting). Position cutter on concrete. Begin cut. After penetrating approx. 1/4", lift cutter off concrete. Starter point will fall out. Move starter point out of the way. Continue cutting with core bit. The starter point eliminates the need for knock-out and taper holes which weaken the shank body and cause breakage. Straight Shank - Masonry Drill bits rotary/Percussion ram Tip Professional Masonry Bits Dia. (in) Point 11/64 1/8 3/16 3/16 3/16 7/32 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 3/8 3/8 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 9/16 5/8 5/8 5/8 5/8 11/16 3/4 3/4 3/4 3/4 7/8 1 1 1 22 - 52 Shank 11/64 1/8 3/16 3/16 3/16 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 1/4 3/8 1/4 3/8 3/8 3/8 1/4 1/4 3/8 3/8 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Overall Length (in) 3 3 3 4 7 8-1/2 4 6 8 12 18 24 4 6 12 18 4 4 6 6 12 18 24 4 6 4 6 6 14 18 24 6 6 14 18 24 6 6 14 18 24 6 6 18 24 Drilling Depth (in) 1-7/8 1-7/8 1-7/8 2-3/8 5-3/8 6-1/2 2-1/4 3-3/4 6 10 16 22 2-1/2 4 10 16 2-1/2 2-1/2 4 4 10 16 22 2-1/2 4 2-1/2 4 4 12 16 22 4 4 12 16 22 4 4 12 16 18 4 4 16 22 TM Part Wt. No. (lbs) RT-1-3 0.1 RT-2-3 0.1 RT-3-3 0.1 RT-3-4 0.1 RT-3-7 0.1 RT-2-8 0.2 RT-4-4 0.1 RT-4-6 0.1 RT-4-8 0.1 RT-4-12* 0.2 RT-4-18* 0.3 RT-4-24* 0.4 RT-5-4 0.1 RT-5-6 0.1 RT-5-12* 0.3 RT-5-18* 0.4 RT-6-4 0.2 RT-6-4A 0.1 RT-6-6 0.2 RT-6-6A 0.2 RT-6-12* 0.4 RT-6-18* 0.5 RT-6-24* 0.7 RT-7-4 0.2 RT-7-6 0.3 RT-8-4 0.2 RT-8-6 0.3 RT-8-6A 0.3 RT-8-14* 0.6 RT-8-18* 0.7 RT-8-24* 0.9 RT-9-6 0.3 RT-10-6 0.4 RT-10-14* 0.8 RT-10-18* 1.1 RT-10-24* 1.3 RT-11-6 0.4 RT-12-6 0.5 RT-12-14* 1.0 RT-12-18* 1.5 RT-12-24* 1.8 RT-14-6* 0.6 RT-16-6* 0.8 RT-16-18* 2.4 RT-16-24* 3.1 Relton’s premium straight-shank masonry bit is designed for use in lightweight, rotating-vibrating hammers, but it can be used equally well in standard drill motors as a rotary bit. A special hard, tough carbide cutter is precisely located for maximum support and strength. Shank diameters 3/8" and larger have 3 flats on the shank to reduce the possibility of slipping in the chuck. • Bulk quantities not available from immediate stock... may be special ordered. For These Use These Size Relton Anchors (in) Screw-Type Masonry Bit (in) 5/32" dia x 3-1/2" lgth 3/16 x 1-1/4 3/16 x 1-3/4 3/16 x 2-1/4 5/32" dia x 4-1/2" lgth 3/16 x 2-3/4 3/16 x 3-1/4 5/32" dia x 5-1/2" lgth 3/16 x 3-3/4 3/16 x 4 1/4 x 1-1/4 3/16" dia x 3-1/2" lgth 1/4 x 1-3/4 1/4 x 2-1/4 3/16" dia x 4-1/2 " lgth 1/4 x 2-3/4 3/16" dia x 5-1/2" lgth 1/4 x 3-1/4 1/4 x 3-3/4 1/4 x 4 Part No. TC-5-3 Wt. (lbs) 0.3 TC-5-5 0.3 TC-5-4 TC-3-3 TC-3-4 TC-3-5 0.3 0.3 0.3 0.3 All relton TC bits are packed 10 per tube. Bulk qty. 100 per size Forged Hammer Tools Scaling Chisels Use for: • Removing scale, rust and concrete spatter Fits These Hammers Spline SDS-max SDS+ 3/4" Hex Description 12" OAL x 2" 18" OAL x 2" 12" OAL x 2" 18" OAL x 2" 12" OAL x 1-1/2" 12" OAL x 2" 18" OAL x 3" Part No. SC-12S SC-18S SC-12MX SC-18MX SC-12DS SC-12HX SC-312HX bull Points or Moil Points Wt. (lbs) 1.6 2.4 1.6 2.4 .8 1.6 2.5 Use for: • Breaking up concrete, brick, asphalt, etc. • Light demolition applications • Starting holes in concrete slabs Fits These Hammers Spline SDS-max SDS+ 3/4" Hex Description 12" OAL 18" OAL 12" OAL 18" OAL 12" OAL 12" OAL 18" OAL Slotting Chisels Part No. BP-12S BP-18S BP-12MX BP-18MX BP-12DS BP-12HX BP-18HX Wt. (lbs) 1.4 2.3 1.4 2.3 .8 1.4 2.3 Use for: • Slotting in concrete and masonry • Breaking web between predrilled holes in concrete to make large opening Fits These Hammers Spline SDS-max Description 12" OAL x 1-1/8" 12" OAL x 1-1/8" Asphalt Cutter Part No. CR-12S CR-12MX Wt. (lbs) 1.3 1.3 Use for: • Cutting asphalt or hard ground - not for concrete Fits These Hammers 3/4" Hex Description 4" x 4-1/2" Clay Spade Part No. AC-HX Wt. (lbs) 4.3 Use for: • Digging clay, dirt, hard-packed gravel, shale, etc. Fits These Hammers Description 3/4" Hex 4 x 4-1/2" – continues – WWW.HANESSUPPLY.COM Part No. CS-HX Wt. (lbs) 4.2 Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Relton Rotary-Only Rebar Cutters (continued) Forged Hammer Tools (continued) Cold Chisels Use for: • edging, chipping and channeling concrete, masonry or brick SDS-max SDS+ 3/4" Hex Part No. CC-12S CC-18S CC-12MX CC-18MX CC-12DS CC-12HX CC-18HX Description 12" OAL x 1" 8" OAL x 1" 12" OAL x 1" 18" OAL x 1" 12" OAL 12" OAL 18" OAL Mortar Chisels Wt. (lbs) 1.4 2.3 1.4 2.3 .8 1.4 2.3 Use for: • cleaning out old mortar between bricks and masonry prior to tuck pointing or caulking • cutting narrow channels Fits These Hammers SPLINE SDS-max Part No. MC-15S MC-15MX Description 15" OAL x 1-1/8" 15" OAL x 1-1/8" bushing Tools Wt. (lbs) 1.6 1.6 Use for: • roughing concrete surface prior to applying a surface finish • concrete surface removal to produce a rough exterior finish Fits These Hammers SPLINE SDS-max 3/4" Hex 16 Pt. SPLINE SDS-max 3/4" Hex Description 1 pc. Bushing Tool 1 pc Bushing Tool 1 pc Bushing Tool Bushing Head Bushing Head Shk Bushing Head Shk Bush Head Shk Ground rod Drivers Part No. BT-16S BT-16MX BT-16HX BH-16 BS-8S BS-8MX BS-8HX Wt. (lbs) 2.6 2.6 2.6 1.1 1.0 1.0 1.0 Description For 5/8" - 3/4" rebar For 5/8" - 3/4" rebar For 5/8" - 3/4" rebar Part No. DR-S DR-MX DR-HX – continues – Wt. (lbs) 0.3 0.6 0.7 0.8 1.3 0.9 1.1 1.6 1.1 Suggested RPM’s 850-1200 850-1200 850-1200 750-1000 750-1000 750-1000 600-850 600-850 600-850 Sugg. RPM 600-850 500-750 500-750 450-600 450-600 350-500 350-500 2 12 RB-32 2.5 RB-32HO 1.8 350-500 2-1/2 12 RB-40 3.1 RB-40HO 2.4 350-500 TDS-2-9 1/2 TDS-2-12 (Supplied w/ complete bit) TDS-2-18 TDS-2-24 9 1/2 12 1/2 18 1/2 24 0.4 0.5 0.9 1.2 TDS-3-9 TDS-3-12 1/2 1/2 9 12 0.4 0.5 TDS-3-18 TDS-3-24 1/2 1/2 18 24 0.9 1.2 (Supplied w/ complete bit) EASY AS…. 1. When rebar is encountered while drilling with a rotary hammer and a carbide hammer bit, immediately stop the hammer and remove the bit from the hole (failure to stop will severely damage a carbide hammer bit - regardless of manufacturer's claim). 2. Mount a rotary rebar cutter in a standard 1/2" drill motor or 1/2" hammer drill (with the selector in the rotary-only position); insert the rotary rebar cutter into the hole and drill through the embedded rebar. 3. Remove the rotary rebar cutter after the rebar has been drilled completely through and finish drilling the hole with the rotary hammer and hammer bit. 1" Drilling Depth Standard Complete Saw includes: • Hole saw cutter-head • Shank (HS-S4 or HS-S6) • Pilot (High-Speed Steel) Will cut: Carbon Steel, Cast Iron, Stainless Steel, Aluminum Wt. (lbs) 1.1 1.1 1.1 Non-removable-Shank rebar Cutters Overall Part Lgth. (in) No. 8 RB-6 12 RB-8 12 RB-9 12 RB-10 18 RB-10-18 12 RB-11 12 RB-12 18 RB-12-18 12 RB-13 Part Wt. No. (lbs) RB-14HO 0.4 RB-16HO 0.6 RB-18HO 0.7 RB-20HO 0.8 RB-22HO 0.9 RB-24HO 1.1 RB-28HO 1.3 Shanks for To Make Rebar Cutters Shank Overall Head Only Dia. Bit Lgth. Wt. Part No. (in) (in) (lbs) brAzED-CArbIDE HOLE SAWS Metal-Cutting HS Series rotary-Only rebar Cutters Dia. (in) 3/8 1/2 9/16 5/8 5/8 11/16 3/4 3/4 13/16 Rebar Cutter Head Only NOTICE: The Relton carbide-tipped rotary rebar cutter is designed for use in a standard 1/2" drill motor, but a hammer drill with a standard 3-jaw chuck may be used provided the selector mechanism on the hammer drill is kept in the rotary-only position. The Relton carbide-tipped rotary rebar cutter is intended for rotary drilling only; percussion (hammering action) will damage the tool. Use for: • driving electrical grounding rods into earth Fits These Hammers SPLINE SDS-max 3/4" Hex Dia. (in) 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 Rebar Cutter Complete Overall Part Wt. Lgth (in) No. (lbs) 12 RB-14 0.9 12 RB-16 1.1 12 RB-18 1.2 12 RB-20 1.3 12 RB-22 1.4 12 RB-24 1.6 12 RB-28 1.8 At last, the answer to drilling through concrete-embedded rebar! No more broken or shattered hammer bits; now you can drill through the rebar and not have to relocate the hole to avoid the rebar! Dia. (in) 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 4 Complete w/ Shank & Pilot Part Wt. No. (lbs) HS-12 0.4 HS-14 0.4 HS-16 0.6 HS-18 0.7 HS-20 0.7 HS-22 0.8 HS-24 0.9 HS-26 1.0 HS-28 1.1 HS-30 1.1 HS-32 1.1 HS-34 1.3 HS-36 1.4 HS-38 1.4 HS-40 1.6 HS-44 1.6 HS-48 1.7 HS-52 1.9 HS-56 2.3 HS-64 2.6 * Supplied w/complete saw WWW.HANESSUPPLY.COM Cutter-Head Only Part Wt. No. (lbs) HS-12HO 0.3 HS-14HO 0.3 HS-16HO 0.3 HS-18HO 0.4 HS-20HO 0.4 HS-22HO 0.4 HS-24HO 0.4 HS-26HO 0.5 HS-28HO 0.6 HS-30HO 0.6 HS-32HO 0.6 HS-34HO 0.7 HS-36HO 0.8 HS-38HO 0.8 HS-40HO 0.8 HS-44HO 0.8 HS-48HO 0.9 HS-52HO 1.6 HS-56HO 1.9 HS-64HO 2.2 Replacement Shanks Part No. Replacement Pilots Part Wt. No. (lbs) HS-S4* SP-41 0.1 SP-61 0.1 S-12 HS-S47 HS-S410 HS-S6* HS-S67 HS-S610 High-Speed Steel 1/4" Dia. - 1" DD High-Speed Steel 3/8" Dia. - 1" DD 22 - 53 22 Cutting Tools Fits These Hammers SPLINE removable-Shank rebar Cutters Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Tub, Tile & Spa HST Series Relton Wood/Fiberglass Cut IWHS Series 2" Drilling Depth Standard Complete Saw includes: • Hole saw cutter-head • Shank (HS-S4 or HS-S6) • Pilot (Carbide tipped) Will cut: Spas & Hot Tubs, Ceramic Tile†, Marble† † Because of the differing densities of these materials, the number of holes cut may vary. Complete w/ Shank & Pilot Dia. Part Wt. (in) No. (lbs) 3/4" HST-12 0.4 HST-14 0.4 7/8" 1" HST-16 0.6 1-1/8 HST-18 0.8 1-1/4 HST-20 0.8 1-3/8 HST-22 0.9 1-1/2 HST-24 1.0 1-5/8 HST-26 1.0 1-11/16 HST-27 1.1 1-3/4 HST-28 1.1 1-15/16 HST-31 1.2 2 HST-32 1.3 2-1/8 HST-34 1.3 2-1/4 HST-36 1.4 2-1/2 HST-40 1.4 3 HST-48 1.5 * Supplied w/complete saw Cutter-Head Only Part Wt. No. (lbs) HST-12HO 0.3 HST-14HO 0.3 HST-16HO 0.3 HST-18HO 0.3 HST-20HO 0.4 HST-22HO 0.4 HST-24HO 0.5 HST-26HO 0.6 HST-27HO 0.6 HST-28HO 0.6 HST-31HO 0.7 HST-32HO 0.7 HST-34HO 0.7 HST-36HO 0.8 HST-40HO 0.8 HST-48HO 1.1 Replacement Shanks Part No. S-12 HS-S4* HS-S47 HS-S410 HS-S6* HS-S67 HS-S610 2" Drilling Depth Standard Complete Saw Includes: • Hole saw cutter head • Shank (HS-S4 or HS-S6) • Pilot (Carbide Tipped) Will Cut: Wood, Fiberglass Replacement Pilots Part Wt. No. (lbs) CP-42 0.1 Carbide-Tipped 1/4" Dia. - 2" DD CP-62 0.1 Carbide-Tipped 3/8" Dia. - 2" DD S-12 Shank HS-S4 Series Shanks HS-S6 Series Shank 3/4 - 10 threads 1/4" pilot hole 1/2" round shank w/3 flats HS-S4 - 3" OAL Wt. 0.5 lbs HS-S47 - 7" OAL Wt. 0.8 lbs HS-S410 - 10" OAL Wt. 1.2 lbs Additional Pilots Part No. CP-41 CP-61 Description 1/4" x 1" DD Carbide-Tipped 3/8" x 1" DD Carbide-Tipped 3/4-10 threads 3/8" pilot hole 1/2" round shank w/3 flats HS-S6 - 3" OAL Wt. 0.5 lbs HS-S67 - 7 " OAL Wt. 0.8 lbs HS-S610 - 10" OAL Wt. 1.2 lbs Wt. (lbs) .01 .01 Interrupted-Cut STHS Series 2" Drilling Depth Standard Complete Saw Includes: • Hole saw cutter head • Shank (HS-S4 or HS-S6) • Pilot (High-Speed Steel) Will Cut: Pipe, Trench Duct, Cellular Metal and all types of ferrous and non-ferrous metals where an “interrupted” cut may occur. Dia. (in) 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2 2-1/4 2-3/8 2-1/2 2-3/4 3 4 Complete w/ Shank & Pilot Part Wt. No. (lbs) STHS-12 0.4 STHS-14 0.5 STHS-16 0.8 STHS-18 0.8 STHS-20 0.8 STHS-22 0.9 STHS-24 1.1 STHS-28 1.3 STHS-32 1.4 STHS-36 1.7 STHS-38 1.8 STHS-40 1.9 STHS-44 1.9 STHS-48 2.1 STHS-64 3.2 Cutter-Head Only Part Wt. No. (lbs) STHS-12HO 0.3 STHS-14HO 0.3 STHS-16HO 0.4 STHS-18HO 0.4 STHS-20HO 0.5 STHS-22HO 0.5 STHS-24HO 0.6 STHS-28HO 0.8 STHS-32HO 0.9 STHS-36HO 1.0 STHS-38HO 1.1 STHS-40HO 1.1 STHS-44HO 1.4 STHS-48HO 1.6 STHS-64HO 2.7 * Supplied w/complete saw 22 - 54 Replacement Shanks Part No. S-12 HS-S4* HS-S47 HS-S410 HS-S6* HS-S67 HS-S610 * Supplied w/complete saw Cutter-Head Only Part Wt. No. (lbs) IWHS-14HO 0.3 IWHS-16HO 0.3 IWHS-18HO 0.3 IWHS-20HO 0.4 IWHS-22HO 0.4 IWHS-24HO 0.5 IWHS-28HO 0.6 IWHS-32HO 0.6 IWHS-34HO 0.6 IWHS-36HO 0.7 IWHS-40HO 0.7 IWHS-44HO 1.1 IWHS-48HO 1.1 IWHS-56HO 1.3 IWHS-64HO 1.6 Replacement Shanks Part No. S-12 Replacement Pilots Part Wt. No. (lbs) HS-S4* CP-42 0.1 HS-S6* CP-62 0.1 HS-S47 HS-S410 HS-S67 HS-S610 High-Speed Steel 1/4" Dia. - 2" DD High-Speed Steel 3/8" Dia. - 2" DD Plastic/Stucco Cut ISHS Series Hole Saw Shank Specifications 1/2 - 13 threads 1/4" pilot hole 3/8" round shank w/3 flats 3" OAL Wt. 0.4 lbs Dia. (in) 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2 2-1/8 2-1/4 2-1/2 2-3/4 3 3-1/2 4 Complete w/ Shank & Pilot Part Wt. No. (lbs) IWHS-14 0.4 IWHS-16 0.7 IWHS-18 0.8 IWHS-20 0.8 IWHS-22 0.8 IWHS-24 1.0 IWHS-28 1.1 IWHS-32 1.1 IWHS-34 1.1 IWHS-36 1.3 IWHS-40 1.4 IWHS-44 1.5 IWHS-48 1.6 IWHS-56 1.7 IWHS-64 2.1 Replacement Pilots Part Wt. No. (lbs) SP-42 0.1 High-Speed Steel 1/4" Dia. - 2" DD SP-62 0.1 High-Speed Steel 3/8" Dia. - 2" DD 2" Drilling Depth Standard Complete Saw Includes: • Hole saw cutter head • Shank (HS-S4 or HS-S6) • Pilot (Carbide Tipped) Will Cut: PVC, Stucco, A.B.S. Materials, Aluminum Siding Dia. (in) 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 2 2-1/8 2-1/4 2-1/2 3 4 Complete w/ Shank & Pilot Part Wt. No. (lbs) ISHS-16 0.7 ISHS-18 0.8 ISHS-20 0.8 ISHS-22 0.8 ISHS-24 1.0 ISHS-26 1.1 ISHS-28 1.1 ISHS-32 1.1 ISHS-34 1.3 ISHS-36 1.3 ISHS-40 1.4 ISHS-48 1.5 ISHS-64 2.2 * Supplied w/complete saw Cutter-Head Only Part Wt. No. (lbs) ISHS-16HO 0.3 ISHS-18HO 0.4 ISHS-20HO 0.4 ISHS-22HO 0.4 ISHS-24HO 0.5 ISHS-26HO 0.6 ISHS-28HO 0.6 ISHS-32HO 0.6 ISHS-34HO 0.6 ISHS-36HO 0.7 ISHS-40HO 0.8 ISHS-48HO 1.1 ISHS-64HO 1.8 Replacement Shanks Part No. HS-S4* HS-S47 HS-S410 HS-S6* HS-S67 HS-S610 Replacement Pilots Part Wt. No. (lbs) CP-42 0.1 CP-62 0.1 Carbide-Tipped 1/4" Dia. - 2" DD Carbide-Tipped 3/8" Dia. - 2" DD METAL-CUTTING FLUIDS rapid Tap® - All-Metal Cutting Fluid* • Greatly extended tool life • Super-fine machined finish in operation after operation • Anti-mist protection for a healthier work environment • No special labeling or reporting • Excels in tough materials • Contains no 1, 1, 1- trichloroethane or other ozone-depleting chemicals Part # Description O4Z-NRT 4 Ounce Cans PNT-NRT Pint Cans 01G-NRT 1 Gallon Cans 05G-NRT 5 Gallon Pail 30G-NRT 30 Gallon Drum 55G-NRT 55 Gallon Drum Case Qty. 24 12 4 1 1 1 Case/Drum Wt. (Lbs)† 10 17 40 49 287 522 *Not recommended for titanium in some applications WWW.HANESSUPPLY.COM Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools A-9® - Aluminum-Cutting Fluid Relton/Tenryu • Eases all operations on aluminum: milling, broaching, drilling, threading, tapping, reaming, sawing, etc. • Contains anti-mist component for a healthier work environment • Contains a scientific blend of chemicals that attach themselves to aluminum surfaces, forming an extreme-pressure boundary lubricant between tool and work surface Description 4 Ounce Cans Pint Cans 1 Gallon Bottles 5 Gallon Pail 30 Gallon Drum 55 Gallon Drum Case Qty. 24 12 4 1 1 1 Case/Drum Wt. (Lbs)† 9 15 34 43 239 433 Option 1 leaves no oily residue Water-based No 1, 1, 1- trichloroethane or other ozone-depleting chemicals Cleans up with clean dry cloth or water Great for use in computer clean rooms, hospitals or when a weld operation follows machining operations Part # 04Z-OP PNT-OP 01G-OP 05G-OP 30G-OP 55G-OP Description 4 Ounce Bottles Pint Bottles 1 Gallon Bottles 5 Gallon Pail 30 Gallon Drum 55 Gallon Drum Case Qty. 24 12 4 1 1 1 Case/Drum Wt. (Lbs)† 9 15 38 48 281 521 * NOT for use on metals that are water reactive, such as magnesium. Power Tool Series Tenryu Power Tool Series for the contractor Exceptional features and superior quality TENRYU’S comprehensive line of blades for portable and stationary power tools. More variety, better quality and greater value. Size ranges from 3 3/8" to 14" for all types of applications. • Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up. • High-grade, fine-grain tungsten carbide tips resist erosion for extended blade life. • Aggressive rake angles for maximum speed and efficiency. • Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping and results in a sharper, longer-lasting edge. • Thin kerf for less waste and lighter cutting performance. • Inserted tooth design on some models greatly increases the body to tip braze area for greater support and tip strength. • Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads. Model No. PT-08520 Dia. (in) Teeth Arbor Gring ATB ATB Kerf (in) Rake Application .039 10 For trim work on 3-3/8" cordless saws. Great performance. 3-3/8 20 15mm PT-10006-01 4 6 22mm PT-10006-02 4 6 PT-11036 4-3/8 36 22mm ATAFR .157 25/-15 For exceptionally clean and smooth biscuit slots in all woods. PT-11536 4-1/2 PT-13530 PT-14036 .157 20 20mm ATAF .063 15 36 3/8" ATAF .063 15 5-3/8 30 10mm ATAF .047 20 5-1/2 36 5/8"/1/2" ATAF .063 15 – continues – Dia. (in) Teeth 6 36 PT-16524 6-1/2 PT-16524-T For very clean and accurate biscuit slots in all woods. For fine trim work on corded or cordless trim saws. For clean and easy trim work on the Porter Cable trim saw. Kerf (in) Arbor Gring ATAF .063 24 5/8" ATB .079 20 6-1/2 24 5/8" ATAF .059 20 PT-16540 6-1/2 40 40 BEVEL 5/8" ATB ATB .063 18 PT-16540-T 6-1/2 40 5/8-KO" ATB .063 18 PT-16552-T 6-1/2 52 5/8"KO" ATAF .063 18 PT-18516B 7-1/4 16 5/8"KO" ATB .073 27 PT-18520B 7-1/4 20 5/8"KO" ATB .073 27 PT-18524 7-1/4 24 5/8"KO" ATB .070 20 PT-18524-P 7-1/4 24 5/8"KO" ATB .070 20 PT-18540 7-1/4 40 5/8"KO" ATB .073 27 PT-18540CB 7-1/4 40 5/8"KO" ATAF .073 12 PT-18540-T 7-1/4 40 5/8"KO" ATB .063 18 PT-18552-T 7-1/4 52 5/8"KO" ATAF .063 18 PT-20360 8 60 5/8" ATAF .087 5 PT-21018 8-1/4 18 5/8"KO" ATB .075 25 PT-21040 8-1/4 40 5/8"KO" ATB .079 15 PT-21060 8-1/4 60 5/8"KO" ATAF .079 12 PT-21640 8-1/2 40 5/8" ATB .087 15 PT-21660-1 8-1/2 60 5/8" ATAF .079 5 PT-21680 8-1/2 80 5/8" ATAF .087 10 PT-23040 9 40 5/8" ATAF .087 5 PT-25532 10 32 5/8" ATAF .091 5 PT-25540 10 40 5/8" ATS .083 0 PT-25550 10 50 5/8" ATAF .091 15 PT-25560 10 60 5/8" ATB .083 0 PT-25560D 10 60 5/8" TCG .087 10 PT-25572 10 10 5/8" ATB .083 0 PT-25590 10 90 5/8" ATAF .091 10 PT-30524 12 24 1" FTG .134 -8 PT-30524A 12 24 20mm FTG .142 -8 PT-30560 12 60 1" ATAF .094 3 PT-15236 PT-16540CR 6-1/2 Option 1® - Metal-Cutting Fluid* • • • • • Model No. PT-30524B 12 24 1/2" 7/8" FTG .079 .142 Rake Application 15 20 -8 PT-30580 12 80 1" ATAF .094 5 PT-305100 12 100 1" ATAF .094 5 PT-35524 14 24 1" FTG .142 -8 For long lasting performance on the DeWalt 5-3/8" cordless saw. For excellent results on 6" corded or cordless saws. For woodworking on 6-1/2" corded saws. FAST! For very fast and easy work on 61/2" corded or cordless saws. For finer cuts on corded 6-1/2" saws. For use on the GRAIN JAMB SAW for carpet/flooring installers.. Ultra-thin kerf for fine work on corded or cordless; saws. Ultra-thin kerf for SUPER clean work on 6-1/2" saws. Our super fast framing and decking blade with INSERTED teeth. Our fast and furious 20 tooth INSERTED TOOTH blade for framers. The ULTIMATE 24 tooth contractor blade. Fast with long cutting life. The choice when cutting pressure treated or wet lumber. COATED. A spectacular INSERTED TOOTH finish blade. Great performance. For long life when cutting SINGLE BOARD CEMENT FIBER BOARD. Ultra-thin blade for finish work on circular saws or trim saw. Ultra-thin, ultra-fine blade for trim work. When fine cuts are vital. A no-nonsense clean cutting 8" wood working blade. Fast cutting for woodworking on table or circular saws. The tremendously popular 8-1/4" Power Tool Series blade. For fine cuts in wood with a table saw or circular saw. A super blade for use on 8-1/2" saws in wood. A super performer on 8-1/2" miter saws. None better. For extra-clean cuts in wood and wood products. Our Power Tool Series blade for 9" saws. A fast, durable 10" blade for miter or table saws. NEW Power Tool Series blade for miter and table saws. INSERTED TEETH for use on miter saws. Great value. NEW Power Tool Series blade for miter and table saws. Triple chip woodworking blade for Power Tool Series. Clean performance on miter and table saws. NEW. For super clean cuts in wood on miter and table saws. For use by rescue squads and fire departments. Rescue saw, 20mm arbor. Rescue saw, 7/8" arbor. Outstanding value. Excellent woodworking miter saw blade. Fine cut-off blade for woodworking on miter saws. Extra clean cuts in wood on your miter or radial arm saw. For use by rescue squads and fire departments. For fine and easy trim work on circular saws. WWW.HANESSUPPLY.COM 22 - 55 22 Cutting Tools Part # 04Z-A9 PNT-A9 01G-A9 05G-A9 30G-A9 55G-A9 Power Tool Series (continued) Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 Alumi-Cut TENRYU’s best value for your non-ferrous metal cutting needs The Alumi-Cut series offers true quality and affordability. These blades are available in a wide variety of sizes to fit most popular job site and shop saws. Excellent results in aluminum, copper brass and other non-ferrous metals. Also good for wood-working and plastic cutting when needed. Resharpenable for long life, the Alumi-Cut blades will help you improve your bottom line! EACH BLADE FEATURES: • Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts. • Appropriate triple-chip grind pattern for non-ferrous metals... • Quality carbide ground to precision. Model No. AC-18560D Dia. Arbor (in) Teeth (in) Grind 7-1/4 60 5/8"KO" TCG AC-21060D 8-1/4 AC-25560D 10 AC-20360D AC-21660D AC-25580D AC-255100D AC-30580D AC-305100D AC-355100D AC-380100D AC-405120D 8 60 8-1/2 60 10 5/8"KO" TCG 60 5/8" TCG 80 100 12 100 15 100 14 16 TCG 60 10 12 5/8" 80 100 120 5/8" 5/8" 5/8" 1" 1" 1" 1" 1" TCG TCG TCG TCG TCG TCG TCG TCG Plasti-Cut Kerf (in) Rake Application .079 0 The very popular 7-1/4" Alumi-Cut blade for non-ferrous metal. .087 0 An exceptional Alumi-Cut for 8" saws. Also works in plastic. .087 0 A great 8-1/4" blade for non-ferrous metals and plastics. .087 0 Our 8-1/2" Alumi-Cut blade for work in non-ferrous and plastic. .087 0 NEW! A super easy cutting AlumiCut blade. .094 0 The hugely popular Alumi-Cut blade for clean non-ferrous work. .094 0 A great choice when cutting thin non-ferrous stock. .110 0 Great for non-ferrous or plastics on miter or radial arm saws. .110 0 For thin stock non-ferrous and plastics on miter or RAS. .118 0 Our 14" Alumi-Cut blade. Great value and performance. .118 0 Fantastic for 15" miter saws for nonferrous and plastics. .134 0 An outstanding blade for non-ferrous cutting. Also works In plastics. TENRYU’s best value for quality cuts in a wide variety of plastics. The Plasti-Cut series offers true quality, variety and affordability. Designed for general purpose cutting applications, the Plasti-Cut blades will perform very well in a wide variety of plastic materials. Cutting plastics with the wrong blade results in chipping of brittle materials and/or melting of the cut edge. The TENRYU Plasti-Cut blades are manufactured to strict tolerances to reduce chipping. In addition, the “no melt” grind pattern in the carbide teeth helps keep heat production down and prevents melting. Smooth, clean and melt-free cuts in PVC, acrylics, and other sheet plastics are made possible. Each blade features: • Individually hammer tensioned steel plates for true run. • Specially selected grade of carbide for excellent work in plastic. • TENRYU's super fine honing leaves a mirror-like finish on the carbide for clean and melt-free cuts. Model No. Dia. Arbor (in) Teeth (in) PC-18560CB 7-1/4 60 PC-25580CB 10 80 5/8" PC-305100CB 12 100 PC-355100CB 14 100 22 - 56 Grind 5/8"KO" ATAF rapid-Cut Rapid-Cut TENRYU’s Premium Heavy Duty Multi-Purpose Blades We offer an entire line of industrial duty blades that cover the 10 to 16 inch diameter range. These blades are all meant to be used on shop tools such as table saws, miter saws and cutoff saws. In addition, many models can be used on more specialized machinery with arbor hole adjustments. Each blade has a large carbide tip which follows the European tradition and can be resharpened up to 20 times. These blades, with the exception of the 24t rippers are adequate for cross cuts and rip cuts making them good “combination blades.” Value is key here. These blades are priced very competitively. The small shop and corporate giant alike will appreciate getting a quality industrial blade at an affordable price. Each blade Features: • Individually hand-hammered, fully heat hardened steel plates for flat, true, wobble-free operation. • Aggressive grind angles for easy performance in heavy-duty jobs. Honing carried out at 400 grit to limit microchipping. • Large, high-grade carbide tips selected for long life in woodworking applications. • Ample side clearance provides for air flow between carbide and workpiece-limits likelihood of burning even heavy rips. Model Dia. Arbor No. (in) Teeth (in) RS-25524CBN 10 24 5/8 RS-25524-U 10 5 ATAF .102 5 1" ATAF .110 5 1" ATAF .118 5 24 5/8 RS-25536CBN 10 36 5/8 RS-25540-U 10 40 5/8 RS-25540 10 40 5/8 RS-25560 RS-30524CBN 10 12 60 24 5/8 1 RS-30536CBN RS-30548CBN RS-35624CBN RS-35536CBN RS-35548CBN RS-40536CBN RS-40560CB 12 12 14 14 14 16 16 An excellent blade for use in plastic and acrylic materials. For cutting a wide variety of plastics on 10" saws. Fine cutting blade for work in plastics of all kinds. Plasti-Cut. For great performance in a variety of plastics. WWW.HANESSUPPLY.COM 50 36 48 24 36 48 36 60 ATB ATB 48 10 ATB ATAF 10 RS-25550 Grind ATB 5/8 RS-25548CBN Kerf (in) Rake Application .079 Tenryu ATAF 5/8 ATBR 1 ATB 1 1 1 1 1 1 ATAF ATB ATB ATB ATB ATB ATB ATAF Kerf (in) Rake Application .126 20 Fast cutting rip blade for industry. Great value and performance. .079 20 Ultra-thin 10" rip blade. Only .079" kerf. Fast and clean. .126 20 Fast cutting general purpose industrial blade. Great value. .118 15 Our very popular 40t Rapid-Cut blade for woodworking. .079 20 Ultra-thin kerf combination blade. Only .079" kerf. .126 20 Great for cross cuts And rip cuts in all woods. Super value. .126 15 Tenryu’s Rapid-Cut combination blade. Outstanding rip or cross. .118 10 Clean cutting table saw blade. .134 20 Fast cutting rip blade for woodworking. .134 20 Semi-smooth cuts in wood. Great for hardwoods. .134 20 Clean combination blade for wood working. .142 20 Fast cutting for work in hardwoods. Industrial quality. .142 20 Fast cuffing for work in hardwoods. Industrial quality. .142 20 Semi-smooth cuts in hardwoods. Good rips and crosses. .134 20 Fast and easy cuts in hardwoods on 16" saws. .126 15 Semi-smooth work in wood and wood products on 16" saws. Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Tenryu Steel-Pro and Stealth Steel-Pro and Stealth (continued) Steel-Pro PRF-25550D PRF-25550DS PRF-30560D* PRF-3056ODS* Dia. Arbor (in) Teeth (in) 10 50 1 12 60 1 10 12 50 60 1 1 Grind Kerf (in) Rake .091 0 TCG .098 TCG .098 TCG TCG .094 0 0 0 PRF-30580BWS* 12 80 1 MTCG .091 -5 PRF-35572D* 14 72 1 TCG .094 0 PRF-35590BWS* 14 90 1 MTCG .091 -5 PRF-40580D* 16 80 1 TCG .102 0 PRF-35572DS* 14 72 1 TCG .094 *These blades are for use on low RPM chop saws only. 0 Application For 10" circular saws and low RPM saws for ferrous metal. NEW STEALTH Steel-Pro for quiet cuts in mild steel. For cutting mild steel on low RPM dry cut saws. NEW STEALTH Steel-Pro for low vibration cuts in mild steel. NEW STEALTH Steel-Pro for low vibration cuts in mild steel (thin stock). For use on dry-cut low RPM saws for cutting mild steel. NEW STEALTH Steel-Pro for low vibration cuts in mild steel. NEW STEALTH Steel-Pro for low vibration cuts in mild steel (thin stock). For use on low RPM saws for cutting mild steel. Stealth The STEALTH is TENRYU’s next generation of steel cutting carbide tipped saw blades. These blades are designed to be quieter than standard STEEL-PRO blades and will last longer as well. The Tenryu STEALTH blades allow you to cut a wide variety of mild steel materials with: • No Dust Clouds • Reduce Sparking • Much Less Noise • Less Burr on Edges • Fewer Blade Changes Features: • Exclusive two-ply blade body for self dampening and low noise operation • Individually hammer-tensioned steel plates for true run • Unique tooth design and geometry for smoother and easier cuts • Inserted teeth with chip limiting steel support for added durability and safety • Tough C-6 carbide for impact resistance and long cutting life STEALTH blades, when used for the proper application, will save lots of time and can outlast abrasive discs 30 to 1. Please note all safety instructions before use and adhere to instructions for maximum rpm speeds. Model No. PRF-13530 Dia. Arbor (in) Teeth (in) 5-3/8 30 10mm PRF-13550 5-3/8 50 10mm Grind MTCG Kerf (in) .059 Rake 0 FTG .055 0 PRF-15238 PRF-16048 PRF-18538BW 6 6-1/4 7-1/4 38 48 38 1/2" 5/8" 5/8"KO" MTCG MTCG MTCG .079 .079 .079 0 0 0 PRF-18548BW 7-1/4 48 5/8"KO" ATB .079 0 PRF-18548DS 7-1/4 48 5/8"KO" MTCG .079 0 PRF-18570BW 7-1/4 70 5/8"KO" FTG .067 -10 PRF-21048BW 8-1/4 48 5/8"KO" MTCG .087 0 PRF-18538DS – continues – 7-1/4 38 5/8"KO" TCG :079 0 Application For long lasting performance on the DeWalt 5-3/8" cordless saw. For the DeWALT cordless saw. Thin stock. For cordless or corded saws. For cordless or corded saws. Our Steel-Pro for cutting ferrous metal up to 1/4" thick. NEW STEALTH Steel-Pro for ferrous metal up to 1/4" thick. Our most popular Steel-Pro. Cuts thick (up to 1/8") and thin. NEW STEALTH Steel-Pro for ferrous metal (up to 1/8") thick. For cutting very thin steel. (Steel sheet, corrugated steel sheet etc). The 8-1/4" Steel-Pro for ferrous metal cutting with circular saws. WWW.HANESSUPPLY.COM 22 - 57 22 Cutting Tools TENRYU’s steel cutting carbide tipped saw blades for industry Cut steel faster, cleaner and easier save time, money and the environment. TENRYU’s complete series of steel cutting saw blades called “Steel-Pro” make light work out of all kinds of mild steel: steel studs, steel sheet, steel pipe, channel, threaded rod and much, much more. Specially formulated C-6 carbide grade resists breakage on impact and lasts longer-much longer than standard carbides or abrasive discs. Special tooth geometry with “inserted” tooth design greatly improves efficiency and durability. Abrasive discs throw sparks and lots of dust, the Steel-Pro blades reduce spark production and eliminate abrasive wheel dust. Abrasive discs wear quickly, requiring frequent blade changes. Steel-Pro blades allow you to keep working, eliminating down time for frequent blade changes. In addition, Steel-Pro cuts much faster. Abrasive discs leave a burr at the cutting edge that must be removed later-the Steel-Pro blades cut clean, eliminating this after cut process. Each blade Features: • Super-flat plates and specially formulated carbide tips with a special tooth grind give fast, clean cuts. • High quality cuts without the clouds of dust and scorch marks associated with friction blades. • Cool cuts that leave the workpiece edge free of burrs. • Reduced cost-per-cut and maximized performance for the operator as a result of fewer blade changes. Model No. Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930 Visit us online at www.hanessupply.com Cutting Tools Cutting Tools 22 22 - 58 WWW.HANESSUPPLY.COM