Transcript
23.2) Port Multiplier Port Multipliers allow the connection of multiple Serial ATA devices to systems through a single Serial ATA port. Port Multipliers can be used for connecting any Serial ATA device, including SATA hard drives, SSD (solid state drive), other types of flash memory with SATA interface or SATA optical drives. The Port Multiplier offers unprecedented scalability, breaking the traditional Serial ATA connection topology of a single SATA device per port.
01. ) 2-Port 6G HPM with eSATA and USB 3.0 )
Model: AD2HPMREU This 2-Port HPM is a simple and economical solution for adding RAID storage or connecting two SATA storage devices hard drive, SSD or optical drive to any system... Connect two hard drives or optical drives to any system via any eSATA port or USB 3.0 / 2.0 port Support SATA I / II / III hard drive Integrated hardware RAID controller for maximize performance
Model: AD2HPMREU - $39.95
RAID Tower Mini (RTMPM6G)
02.) Drive-mount 2-Port 6G HPM RAID Tower Mini (RTMPM6G) RAID Tower Mini (RTMPM6G) ExDrive
03.) Internal 5-port 6G Port Multiplier (PM)
Model: AD2HDDHP6G This Drive-mount 2 -port 6G HPM is a 2drive hardware Port Multiplier designed to mount directly onto the back of any hard drive or SSD equipped with a standard combo 22-pin SATA power and data connector... Connect up two SATA hard drives or SSD to a single SATA port Mount directly onto the back of a SATA hard drive or a Mobile Rack Up to 6 Gbits/sec when connecting to SATA 3.0 port supporting this speed
Model: AD2HDDHP6G - $32.99
Model: AD5SAPM6G The internal 5-SATA 6G PM (Port Multiplier) is the newest member that supports SATA 3.0 6Gbps data transfer rate....connect up to 5 SATA hard drives or optical drives into a single SATA port on a system board or ... Connect up to 5 SATA hard drives or optical drives via a single SATA port Up to 6 Gbits/sec when connecting to SATA 3.0 port supporting this speed Mount onto any standard or low profile add-in card slot
Model: AD5SAPM6G - $69.95
04.) 5-Port 6G Rack Mount PM Model: AD5SARM6G This latest Addonics 6G Rack Mount Port Multiplier (PM) connects up to 5 SATA hard drives or SSD to a computer using one eSATA connection at SATA III speed of 6Gbps... Connect up to 5 SATA HDD/SSD or optical drives to a computer via a single eSATA port Up to 6 Gbits/sec when connecting to eSATA 3.0 port mounted onto Addonics Storage Tower, Storage Rack or chassis with SCSI-I cut-out
Model: AD5SARM6G - $75.00
5.) Port Multiplier Ultra Model: AD5EHPMEU3 The Port Multiplier (PM) Ultra is one of the most advanced external PMs in the market to connect as many as 5 eSATA storage devices to any computer via a single eSATA or USB 3.0 port... Connect up to five eSATA storage device to any system via a single eSATA port or USB 3.0 / 2.0 port Integrated hardware RAID controller to maximize performance RAID volume can be used as a boot drive or as additional storage
Model: AD5EHPMEU3 - $119.00
6.) 5 Port HPM-XU - Discontinued Discontinued Connect up to five SATA hard drives or optical drives to any system via any eSATA port or USB 3.0 / 2.0 port Support SATA I / II / III hard drive RAID configuration in two ways via onboard dip switches for simple...
7.) 5 Port Hardware PM XA (System Version) Model: AD5HPMSXA - $89.00 AD5HPMRXA-E - $69.00
The 5-Port HPM XA is a feature rich Hardware Port Multiplier that enables connecting up to 5 SATA drives to an eSATA port. It is a perfect solution for attaching HDD as individual drives or as a RAID volume. System version installs into a computer system. System version installs into a computer system RAID configuration is programmed using onboard jumpers for simple deployment Integrated hardware RAID controller to maximize performance RAID management software included
8.) 5X1 External Port Multiplier (EPM) The 5X1 External Port Multiplier (EPM) is the ideal solution for attaching large numbers of external hard drives to a computer. Designed with the same ASIC as the Addonics field proven 5X1 Rack Mounted PM, this EPM can connect up to 5 external eSATA... Connect up to five eSATA hard drives or optical drives via an eSATA port (must be Port Multiplier compatible) on any system. Connect up to five eSATA hard...
Model:
9.) 5X1 Internal SATA Port Multiplier (PM) Combines up to 5 SATA hard drives into one SATA connection. Designed to be mounted in the PCI bracket of a standard desktop tower, the Internal Port Multiplier can combine up to 5 SATA hard drives into a single SATA connection to an onboard or add-in... Connect up to 5 SATA hard drives via 1 SATA port Compatible with CF memory card or Micro Drive™ using Addonics SATA CF adapters (ADSAHDCF or ADSACF) Up to 3Gbits/sec Compatible with Host Controllers using the...
Model: AD5SAPM - $62.00
10.) 4-port External USB 3.0 HUB This 4-port external USB 3.0 hub is an easy solution for adding three more SuperSpeed USB 3.0 port via a single USB 3.0 port on any computer... Expand to 4 USB ports from a single USB port on any computer USB 3.0 / 2.1 / 1.1 compliant Self powered from USB port, no external power adapter is required
Model: AD4U3HE - $25.99 AD4U3HEP - $32.99
