Preview only show first 10 pages with watermark. For full document please download

232a Rs232 Adapter - Southwest Microwave

   EMBED

Share

Transcript

Southwest Microwave, Inc 9055 S. McKemy Street Tempe, AZ 85284 (480) 783-0201 Fax (480) 783-0401 PRODUCT PROFILE # 535 232A RS232 Adapter The 232A Adapter is used to communicate with the Intrepid MicroPoint Cable system or MicroNet system. It is used to program the address and communication terminations of Processor Modules before they are installed. It is also used for maintenance purposes. This device has a small circuit card with a dB9 on one end, a 16-pin female IDC connector on the ribbon cable end, a microprocessor and a RS232 driver chip. They connect to the male 16-pin IDC connector on any Processor Module (PM) circuit board for RS232 communications to a PC or modem. The connector is keyed to prevent a wrong connection. The microprocessor supervises and buffers the two-wire duplex format communication between the PM and a PC or modem. The maximum wire distance from the 232A to a PC or modem is 50 feet (15m). The 232A Adapter is 15 ½ inches (394mm) long, 1 ½ inches (38.1mm) wide and weighs less than 1 pound. Product Profile # 535 232A Product Profile 12/27/05