Preview only show first 10 pages with watermark. For full document please download

2.4 Ghz 6.5 Dbi Diversity Patch Antenna With Rpsma Plug

   EMBED


Share

Transcript

TerraWave Solutions® 2.4 GHz 6.5 dBi Diversity Patch Antenna with RPSMA Plug Connectors TerraWave’s spatial diversity antenna solution offers two 6.5 dBi single linear polarization directional antennas in a single unit which is perfect for a variety of indoor or outdoor wireless applications. This antenna consists of a patented, low cost, high performance circuit design, enclosed in a low profile, aesthetically pleasing plastic radome. It is designed with an aluminum backplane for superior durability. The antenna circuit is DC grounded to aid in lightning protection. An adjustable mounting kit is also available for increased flexibility during installation. Two 36” integral cable pigtails with RPSMA plug connectors are included. Every TerraWave antenna is covered by the Company’s two year TerraNet warranty program. Visit www.terrawave.com for additional information. Electrical Specifications Model T24065P23620 Frequency Range 2.4 - 2.5 GHz Gain 6.5 dBi Polarization Single Linear VSWR ≤ 1.5:1 Front-to-Back Ratio < 19 dB E-Plane Beamwidth 55° H-Plane Beamwidth 90° Power Rating 30 Watts Impedance 50 Ohms Lightning Protection DC Ground Mechanical and Environmental Specifications Length 8.5" Width 4.5" Depth 0.5" Weight 0.3 lbs. Connector Type, Standard RPSMA Plug Pigtail 36" Backplane Aluminum Radome Operating Temperature -49°F to +149°F Pole Mount Diameter Range 0.75" to 1.75" E-Plane 10521 Gulfdale, San Antonio, TX 78216 www.terrawave.com White UV stabilized ABS H-Plane www.tessco.com/go/terrawave Phone: 800-472-7373 Email: [email protected] TerraWave Solutions® Antenna Bracket Mounting Kit (TBRA-A-1964-01) for the TerraWave Solutions® 2.4 GHz 6.5 dBi Diversity Patch Antenna (T24065P23620—Antenna is Purchased Separately) Installation Instructions Articulating Bracket Kit Components Step 1: Assemble the antenna bracket to the wall/pole bracket by screwing thumb screw through both pieces as shown. Be sure to leave thumb screw loose until antenna is mounted for final antenna orientation. 10521 Gulfdale, San Antonio, TX 78216 www.terrawave.com www.tessco.com/go/terrawave Phone: 800-472-7373 Email: [email protected] TerraWave Solutions® Antenna Bracket Mounting Kit (TBRA-A-1964-01) for the TerraWave Solutions® 2.4 GHz 6.5 dBi Diversity Patch Antenna (T24065P23620—Antenna is Purchased Separately) Installation Instructions (continued) Center Bracket Screw Connection Antenna Orientation Detent Back of Antenna Antenna Orientation Locating Pen Antenna Bracket Mount 10521 Gulfdale, San Antonio, TX 78216 www.terrawave.com www.tessco.com/go/terrawave Phone: 800-472-7373 Email: [email protected] TerraWave Solutions® Antenna Bracket Mounting Kit (TBRA-A-1964-01) for the TerraWave Solutions® 2.4 GHz 6.5 dBi Diversity Patch Antenna (T24065P23620—Antenna is Purchased Separately) Installation Instructions (continued) Step 2: Attach antenna bracket mount to antenna with the included Philips screw driver. Orient bracket as required and make certain the antenna orientation locating pin is properly located in antenna detent. (See previous 2 pictures.) Step 3: Attach antenna bracket assembly to wall using the included wall anchors and screws or attach to pole using the included band clamps. Orient antenna as required and tighten thumb screw. 10521 Gulfdale, San Antonio, TX 78216 www.terrawave.com www.tessco.com/go/terrawave Phone: 800-472-7373 Email: [email protected]