Transcript
USB RUBBER FAN
UCUR12-BL
Package Includes：
USB Fan * 1
UCUR12-R
Fan Guard* 1
Skin Pad * 1
How to use skin pad
U.R.VEGAS UCUR12
1. Identify the skin pad Magnet
thin
2 magnets in each corner, 8 magnets in total
thick：for case panel side
Air in
Air out
2. Insert the fan into skin pad and pull out the USB cable and LED switch from the hole Spin Direction Pull out
How to attach fan guard Place the fan guard in between the fan (exposing side) and skin pad
！
Please attach the fan guard at all times for external use to avoid any harm and accident
How to power the fan ！
Please do not remove the fan while it is spinning
1.Fix the fan with magnets at any place that needs extra cooling
2.Plug in the USB connector
How to adjust LED mode Click the LED button to select the LED mode
● Quick off function : press the button for 3 seconds for “OFF” mode ● Memory function : the LED mode would remain the mode before restart
How to detach fan blades
How to reattach fan blades
Carefully push out the fan blades with your thumbs in the inner area.
Press the center of the blades towards the frame until it clicks
！
Please keep the circular LED ring dry when using at all times
www.enermax.com
forum.enermax.com
