Transcript
24” Marvel Low Profile All Refrigerator ADA Height Model # MA24RA****
Certified to meet ENERGY STAR® requirements •D ynamic Cooling Technology™ delivers rapid cooldown and the industry’s best temperature stability • Low profile, ADA height allows for universal installation applications, both commercial and residential • MARVEL Intuit™ Integrated Controls ensure precise temperature management from 34°F to 42°F • MaxStore™ roller-glide clear utility bin provides maximum volume to effectively store large, bulky or loose items • Tall item storage: Half-width interior shelf and extra door storage allows for high-clearance vertical storage • Pristine arctic white interior easily wipes clean and efficient white LED lighting illuminates interior for better viewing • Close Door Assist System™ gently and automatically closes door • Panel overlay option features soft-close integrated hinge for a truly flush fit with cabinetry • Audible and visual alarms signal when door is left ajar to protect food integrity and energy use • Vacation/Sabbath mode conserves energy during times when the unit is not in use and complies with Star-K requirements • Height adjustment up to 1” with leveling legs • 4” black adjustable toe kick • 1-year warranty
Storage Capacity Up to (118) 12-oz cans
Storage Configuration (1) f ull-width and (1) half-width cantilevered, fully adjustable white steel-framed glass shelves (1) fixed white steel-framed glass shelf
Ordering Details Solid Stainless Steel Door, Right Hinge
MA24RAS2RS
Solid Stainless Steel Door, Left Hinge
MA24RAS2LS
Smooth White Door, Right Hinge
MA24RAS2RW
Smooth White Door, Left Hinge
MA24RAS2LW
Smooth Black Door, Right Hinge
MA24RAS2RB
Smooth Black Door, Left Hinge
MA24RAS2LB
Solid Panel Overlay Door, Integrated Right Hinge
MA24RAP3RP
Solid Panel Overlay Door, Integrated Left Hinge
MA24RAP3LP
No panel installation kit required.
Product Dimensions 23⅞” W x 31⅛” H x 25⅝” D (including handle)
Finish/Door Options
Stainless Steel
White
Black
Wood Overlay (Panel Ready)
Forced Air Fan
"A"
Evaporator Plate
"B"
Return Air Intake Front
"C"
24" Rough-In Dimensions "A"
"B"
"C"
(61 cm)
(79.7 to 82.2 cm)
24" (61 cm)
PRODUCT DIMENSIONS 24" 31 3/8" to 32 3/8"
Forced Air Fan
PRODUCT DATA ELECTRICAL REQUIREMENTS #
PRODUCT WEIGHT
115V/60Hz/15A
105 lbs (47.7 kg)
ML15**(P) or (F)
115V/60Hz/15A
105 lbs (47.7"F" kg)
ML24**(G) or (S)
115V/60Hz/15A 31 1⁄8” to 32 1⁄8” (79.7 to 82.2 cm)
MODEL ML15**(G) or (S)
Cabinet Dimensions
"D"
23 7⁄8” (60.7 cm)
"E"
140 lbs 23 23⁄32” (63.6 kg)
115V/60Hz/15A
(60.2 140 lbscm) (63.6 kg)
MA24**(G) “G” or (S)
115V/60Hz/15A “H”
140 lbs (63.6“J” kg)
25 21⁄32” MA24**(P) or (F)
46 13⁄32” 115V/60Hz/15A
140 lbs 25 11⁄16” ((63.6 (65.2kg) cm)
ML24**(P) or (F)
(65.2 cm)
(117.9 cm)
Evaporator Plate Return Air Intake
"J"
Front
Side "H"
"D"
"G"
Dynamic Cooling Technology™ delivers rapid cool down and the industry’s best temperature stability
"E"
211⁄2" (54.6 cm)
Figure 8 "F"
The distinctive Marvel design features a thermal-efficient cabinet and door combined with Dynamic Cooling Technology™ for superior temperature stability, faster cooling times and speedy temperature recovery even with high frequency.
* Depth dimension of rough-in opening may vary dependAPPLIES TO THE FOLLOWING MARVEL MODELS ingWidth on each individual installation. To23 recess entire door "F" Temperature Vacation / ⅞" Range 34° - 42° F ML15BC MA24BC dimension plus 1" (2.5 cm) for thickness of power cord plug Sabbath Mode Interior Finish White Lock NA is required. ML15RA MA24BR Capacity Up to 100 12-oz cans ** Minimum rough-in opening required is to be larger than the adjusted height of the cabinet. Shelving System
Cantilever
# A grounded 15 amp dedicated circuit is required. Follow Stainless Steel all Shelf local Fronts building codes when installing electrical and appliance. Other Storage MaxStore™ Utility Bin Interior Lighting
2 White LED Pods
Toe Grill Finish Hinge Handle Control Type
Black
!
Classic Hinge
WARNING Designer Intuit™
Electrical RequirementsMA24RA120V / 60Hz / 15A Length of Power Cord ML24BC Product Dimensions
5'
Agency Approvals ENERGY STAR Certified
ML24BR 23 ⅞" W x 31 ⅛" H x 21 ½" D
Depth to Front of DoorML24RA
23 23/32"
Depth to Handle
25 21/32"
Depth with door at 90°
46 13/32"
Shipping Weight
160 lbs
Finishes Key SS = Stainless Steel
Floor mount Anti-tip Bracket must be installed for freestandB = Black ing applications. Not required for Finishes SS,built B, W,inOapplications.
9
W = White O = Overlay
Yes CSA
DOOR PANEL INSTALLATION Overlay Panels
OVERLAY DOOR PANEL INSTALLATION Step 3: Cut and drill the overlay panel
To p
Hinge side of door
of
do
or
ML15RAP*LP Solid, Left Hand with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be ML15BCF*RP Glass, Right Hand Figure 19 flush with the top of the door and centered along the width ML15BCF*LP Glass, Left Hand of the door. See Figure 12a. DrillFigure holes 17 through the gasketRight Hand Hinged Door ML15BCP*RP Solid, Right Hand 24" (61 cm) wide appliance extrusion using the 10 holes pilotHinged holes. Use Left as Hand Doorthe drill ML15BCP*LP Solid, Left Hand size from the chart in Table "C", being careful not to drill 24" (61 cm) wide appliance through the front surface of the panel, drill no deeper than ML24RAP*RP Solid, Right Hand 1 Clearance for hinge ⁄2" (12.7 mm) deep. If the overlay panel is thinner than Clearance for hinge ML24RAP*LP Solid, Left Hand 5 at top and bottom ⁄8" (16 mm) thick shorter will have to be obtained. at topscrews and bottom ML24BRF*RP Glass, Right Hand Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 22a). Remove the clamps ML24BRF*LP Glass, Left Hand 23 ⁄ " 23 ⁄ " and replace the gasket in the gasket extrusion channels of (60.3 cm) Solid, Right Hand ML24BRP*RP (60.3 cm) ⁄" ⁄" the door. Some force may be required to (6seat mm) the gasket ML24BRP*LP Solid, Left Hand Deep are seated (6 mm) into the channels. Be sure the gasket corners Deep Glass, Right Hand properly. MA24BRF*RP with Lock
Figure 19 Right Hand Hinged Door 24" (61 cm) wide appliance
7 ed Door appliance
Clearance for hinge at top and bottom
⁄4" (6 mm) Deep 1
233⁄4" (60.3 cm)
⁄4" (6 mm) Deep 1
3
14" (35.6 cm)
47⁄8" (12.4 cm)
3 ⁄8" (7.9 cm)
13⁄16" (3 cm)
Material Type
3 ⁄32" (9.8 cm) 27
3 ⁄ " Hardwood 27
1
32
(9.8 cm)
Softwood 1 ⁄4" (6 mm) radius is permissible
31⁄8" (7.9 cm)
3 1 ⁄8 " (7.9 cm)
4 ⁄8" (10.5 cm)
2" (5.1 cm)
2" 5.1 cm)
Door liance
111⁄16" (4.3 cm) 1
3 ⁄16" (9.4 cm) 11
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places
4
14"
MA24BRF*LP (35.6 cm)
1 ⁄16" 3 1 ⁄8 " (3 cm) (7.9MA24RAP*RP cm)
#10 Wood Screw
MA24RAP*LP
⁄64 (2.8 mm) Diameter. Pilot Hole
7
C
4⁄" Glass, Left Hand (12.4 cm) with Lock 7
327⁄32"
Table D 31⁄8" (7.9 cm)
"A" (See Table D)
15⁄32" (2.9 cm)
15⁄32" (2.9 cm)
This side facing interior
111⁄16" (4.3 cm)
This side facing interior
111⁄16" (4.3 cm)
OVERLAY DOOR PANEL INSTALLATION 2" 2"
4 ⁄8" (10.5 cm)
41⁄8" (10.5 cm)
(5.1 cm)
(5.1 cm)
1
Figure 20 Right Hand Hinged Door 24" (61 cm) wide appliance
17
1 ⁄2" (3.8 cm) typical 1
311⁄16" (9.4 cm)
3 ⁄16" 11
1" (2.5 cm) diameter (9.4 cm) Step 5: Assemble lock parts x ⁄ " (6 mm) deep 1
Two (2) lock 4extensions are provided with the lock. Use places the longer extension for 3⁄4" thick overlay Figure 18 panels and the 5 shorter one for ⁄8" thick panels. Assemble the lock Leftoverlay Hand Hinged Door extension, cam stop washer, spring and set screw 24" (61 cm) widewasher, appliance to the lock as shown in Figure 21 and 23. 17
OVERLAY DOOR PANEL INSTALLATION
Figure 20 Right Hand Hinged Door 24" (61 cm) wide appliance #10 x 1/2" screw
CAUTION
MODEL
DESCRIPTION
ML15RAP*RP
Solid, Right Hand
ML15RAP*LP ML15BCF*RP ML15BCF*LP ML15BCP*RP
31/2" (89 mm)
DIM "A"
BRASS EXTENSION Solid, Left Hand
SPRING WASHER NUT
Glass, Left Hand
LOCK
Solid, Right Hand Solid, Left Hand
ML24RAP*RP
Solid, Right Hand
ML24RAP*LP
Solid, Left Hand 1/2 HOLE
CAM
Overlay panel flush with top of door. 3011⁄32" (77.1 cm)
1 ⁄2" (13 mm) diameter drill through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep.
PHILLIPS SCREW
ML24BRF*RP13/16 COUNTER Glass, Right Hand
Overlay panel to be centered on width of door.
DEEP ML24BRF*LPBORE 7/16Glass, Left Hand
Solid, Right Hand
INNER DOOR
ML24BRP*LP Holes in Solid, Left Hand 3/4 INCH gasket Glass, Right Hand WOOD PANEL MA24BRF*RP retainer. SECTION A-A with Lock SCALE 1 : 1
Material Type Hardwood Softwood Hardwood Softwood
#10 Wood Screw Press and hold down this #10 Wood Screw ⁄8" (3.2 mm) Diameter. Pilot Hole tab on the wire connec71 tor pull the connector ⁄64⁄8"(2.8 mm) Diameter. Pilot (3.2and mm) Diameter. PilotHole Hole 7 ⁄64 apart. (2.8 Table C mm) Diameter. Pilot Hole
1
Table C Figure 11
Step 4: Assemble the panel to the door
The preferred method of attaching the panel to the door
Glass, Left Hand Figure 21 MA24BRF*LP Figure 12a with Lock 2723⁄32" (70.4 cm) Solid, Right Hand MA24RAP*RP with Lock MA24RAP*LP
Counter bore lock hole on back side. Figure 22a
17 ⁄32" (13.7 mm)
Glass, Right Hand
ML15BCP*LP
ML24BRP*RP
11⁄2" (3.8 cm) typical
18
Step 4: Assemble the panel OVERLAY to the door DOOR PANEL INSTALLATION DOOR
The preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps 2:the Remove doorthat gasket with Step pads on clampingthe surfaces will not mar the thedoor. door The laying on a flat surface andshould starting panelWith or the custom overlay panel beat a corner of the door remove the magnetic doorthe gasket flush with the top of the door and centered along widthfrom interior of the Figure 12. the Set gasket the gasket of thethe door. Seeside Figure 12a.door, Drillsee holes through asideusing on a flat extrusion the surface. 10 holes as pilot holes. Use the drill DOOR PANEL INSTALLATION size from the chart in Table "C", being careful not to drill There are 10 holes extrusions, through the front surfaceinofthe thegasket panel,retainer drill no deeper than(3 on eachmm) sidedeep. and 2Ifatthe theoverlay top andpanel bottom which are 1 ⁄2" (12.7 is thinner thanused to fasten panel to the front of door. screws are 5 ⁄8" (16 mm)the thick shorter screws willthe have to The be obtained. provided in the literature packthe along with theprovided door lock, Fasten the! panel to the door with 10 screws in earance for which is pack. provided onFigure certain22a). models. the literature (See Remove the clamps rew head, and replace the gasket in the gasket extrusion channels of places Weight of overlay door panel must not exceed 15 the door.(6.8 Some required to or seat gasket pounds kg) force for a may solidbe door model 10the pounds intokg) the for channels. suremodel. the gasket corners are seated (4.5 a glassBe door properly.
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places
4
Install this lock assembly into the lock hole in the overlay panel and secure with the retaining nut on the back side with a 15 mm socket and ratchet. Make sure the key slot in the front of the lock is vertical.
Material Type
2723⁄32" (70.4 cm)
Solid, (9.8 cm)Left Hand with Lock
3 1 ⁄8 " (7.9 cm) "A" (See Table D)
8
Solid, Right Hand with Lock
1 ⁄4" (6 mm) radius is permissible
31⁄8" (7.9 cm)
1
1 ⁄2" (3.8 cm) typical
13⁄4" (4.4 cm)
31⁄8" (7.9 cm)
1 ⁄4" (6 mm) radius is Table permissible
3011⁄32" (77.1 cm)
4
3
15⁄32" (2.9 cm) This side facing interior
1
⁄8" (3.2 mm) Diameter. Pilot Hole
3 1 ⁄8 " (7.9 cm)
"A" (See Table D)
4
13⁄4" (4.4 cm)
14" (35.6 cm)
47⁄8" (12.4 cm)
13⁄16" (3 cm)
1
"A" (See Table D)
3
4
1
13⁄4" (4.4 cm)
4" cm)
CAUTION
Hinge side of door
ht of overlay door panel must not d 15 pounds (6.8 kg) for a solid model or 10 pounds (4.5 kg) for a door model.
Depending on your model cut the overlay door panel to the dimensions shown in Figures 13 to 20. Also see Table "D" Clearance for cut for the height dimension and door styles. The window ! screw head,has a out is for glass door models only. If your appliance r places oo lock also drill the lock hole in the panel,4see Figure 22. OVERLAY DOOR PANEL INSTALLATION fd Weight of overlay door panel must not To po po To exceed 15 pounds (6.8 kg) for a solid fd oo door model or 10 pounds (4.5 kg) for a r 15 door model. Step 4: Assemble the panelglass to the door DOOR The preferred method of attaching the panel to the door MODEL DESCRIPTION DIM "A" is to clamp the panel to the door so it cannot move while ML15RAP*RP Solid, Right Hand drilling the screw pilot holes. Use bar clamps or "C" clamps Hinge side of door
CAUTION
Clearance for screw head, 4 places
Hinge side of door
!
Clearance for screw head, 4 places
Figure 22
Solid, Left Hand with Lock Table D
Step 6: Install lock cam
For comprehensive installation instructions, please visit www.marvelrefrigeration.com
Attach the lock cam to the back of the lock assembly with the phillips head screw provided. Orient the lock cam verti-
