Transcript
24” Marvel Refrigerator and Freezer with Crescent Ice Maker and MaxStore™ Utility Bin Model # ML24RI****
• Dynamic Cooling Technology™ delivers rapid cooldown and the industry’s best temperature stability • MARVEL Intuit™ Integrated Controls ensure precise refrigeration temperature management from 34°F to 42°F and freezer a temperature between -6° F and 6° F to keep contents evenly frozen throughout • Cantilevered, adjustable shelving system • MaxStore™ roller-glide clear utility bin provides maximum volume to effectively store large, bulky or loose items • Pristine arctic white interior easily wipes clean and efficient white LED interior lighting illuminates interior for better viewing • Top-mounted vertical freezer with crescent ice maker, ice bucket and self-closing door • Close Door Assist System™ gently and automatically closes door • Panel overlay option features soft-close integrated hinge for a truly flush fit with cabinetry • Audible and visual alarms signal when door is left ajar to protect food integrity and energy use • Vacation/Sabbath mode conserves energy during times when the unit is not in use and complies with Star-K requirements • Height adjustment up to 1” with leveling legs • Crescent ice maker provides up to 7 lbs of ice in 24 hours • Automatic defrost
Storage Capacity
• 4” black adjustable toe kick
Refrigerator: Up to 72 12-oz cans Ice bucket capacity = 13 lbs
• 1-year warranty
Storage Configuration (2) half-width cantilever, fully adjustable steel-framed glass shelves (1) full-width fixed position white steel-framed glass shelf (1) MaxStore™ Utility Bin (1) Crescent Ice Bin
Ordering Details Solid Stainless Steel Door, Right Hinge
ML24RIS3RS
Solid Stainless Steel Door, Left Hinge
ML24RIS3LS
23⅞” W x 33¾” minimum H x 25 21/32” D (including handle)
Smooth Black Door, Right Hinge
ML24RIS3RB
Finish/Door Options
Smooth Black Door, Left Hinge
ML24RIS3LB
Smooth White Door, Right Hinge
ML24RIS3RW
Smooth White Door, Left Hinge
ML24RIS3LW
Solid Panel Ready Overlay Door, Integrated Right Hinge
ML24RIP4RP
Solid Panel Ready Overlay Door, Integrated Left Hinge
ML24RIP4LP
No panel installation kit required.
Product Dimensions
Stainless Steel
Black
White
Wood Overlay (Panel Ready)
Forced Air Fan
"A"
Evaporator Plate
"B"
Return Air Intake Front
"C"
24" Rough-In Dimensions "A"
"B"
"C"
24” (61 cm)
**34" to 35" (86.4 to 88.9 cm)
24” (61 cm)
Forced Air Fan Cabinet Dimensions
Evaporator Plate
"D"
"E"
"F"
23 7⁄8” (60.7 cm)
33 3⁄4” to 34 3⁄4” (85.7 to 88.3 cm)
23 23⁄32” (60.2 cm)
“G”
“H”
“J”
25 21⁄32” (65.2 cm)
46 13⁄32” (117.9 cm)
25 11⁄16” (65.2 cm)
Return Air Intake
"J"
Front
Side "H"
"D"
"G"
Dynamic Cooling Technology™ delivers rapid cool down and the industry’s best temperature stability
"E"
211⁄2" (54.6 cm)
Figure 8 "F"
Width
23 ⅞"
Interior Finish
White up to 72 12-oz cans Ice Bucket capacity = 13 lbs
Capacity Shelving System Shelf Fronts
Formed Metal MaxStore™ Utility Bin Ice Bucket
Other Storage Interior Lighting Toe Grill Finish Hinge Handle
Cantilever
!
1 White LED Pod Black
WARNING Classic Hinge Designer
Control Type Temperature Range Lock Electrical Requirements Length of Power Cord Product Dimensions
Intuit™ Refrigerator: 34° - 42° F Freezer: -10° - 6° F NA
The distinctive Marvel design features a thermal-efficient cabinet and door combined with Dynamic Cooling Technology™ for superior temperature stability, faster cooling times and speedy temperature recovery.
Finishes
SS, B, W, O
Vacation / Sabbath Mode
Yes
Agency Approvals
CSA
120V / 60Hz / 15A 5' 23 ⅞" W x 33 ¾" H x 21 ½" D
Depth to Front of Door
23 23/32"
Depth to Handle
25 21/32"
Depth with door at 90°
46 13/32"
Shipping Weight
160 lbs
Finishes Key SS B W O
= = = =
Stainless Steel Black White Overlay
Overlay Panels CAUTION To p
Hinge side of door
Clearance for screw head, 4 places of
Clearance for screw head, 4 places p To
do
or
OVERLAY DOOR
The preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 12a. DrillFigure holes 17 through the gasket extrusion using the 10 holes pilotHinged holes. Use Left as Hand Doorthe drill size from the chart in Table "C", being careful not to drill 24" (61 cm) wide appliance through the front surface of the panel, drill no deeper than 1 ⁄2" (12.7 mm) deep. If the overlay panel is thinner than Clearance for hinge 5 ⁄8" (16 mm) thick shorter will have to be obtained. at topscrews and bottom Fasten the panel to the door with the 10 screws provided in the literature pack. (See Figure 22a). Remove the clamps 23 ⁄ " and replace the gasket in the gasket extrusion channels of (60.3 cm) ⁄" the door. Some force may be required to (6seat mm) the gasket Deep are seated into the channels. Be sure the gasket corners properly.
Clearance for hinge at top and bottom 23 ⁄4" (60.3 cm) 3
⁄4" (6 mm) Deep
3
4
1
13⁄4" (4.4 cm)
14" (35.6 cm)
47⁄8" (12.4 cm)
1 ⁄16" (3 cm)
13⁄16" (3 cm)
Material Type
3 ⁄32" (9.8 cm) 27
3 ⁄ " Hardwood 27
1
32
(9.8 cm)
Softwood ⁄4" (6 mm) radius is permissible 1
31⁄8" (7.9 cm)
31⁄8" (7.9 cm)
3 1 ⁄8 " (7.9 cm)
#10 Wood Screw
⁄8" (3.2 mm) Diameter. Pilot Hole ⁄64 (2.8 mm) Diameter. Pilot Hole
7
⁄4" (6 mm) radius is Table permissible 1
111⁄16" (4.3 cm) 41⁄8" (10.5 cm)
2" (5.1 cm) 311⁄16" (9.4 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places
Figure 20 Right Hand Hinged Door 24" (61 cm) wide appliance
ML15RAP*RP
Solid, Right Hand
ML15RAP*LP
Solid, Left Hand
ML15BCF*RP
Glass, Right Hand
ML15BCF*LP
Glass, Left Hand
ML15BCP*RP
Solid, Right Hand
ML15BCP*LP
Solid, Left Hand
ML24RAP*RP
Solid, Right Hand
ML24RAP*LP
Solid, Left Hand
ML24BRF*RP
Glass, Right Hand
ML24BRF*LP
Glass, Left Hand
ML24BRP*RP
Solid, Right Hand
ML24BRP*LP
Solid, Left Hand
MA24BRF*RP
Glass, Right Hand with Lock
MA24BRF*LP
Glass, Left Hand with Lock
MA24RAP*RP
Solid, Right Hand with Lock
MA24RAP*LP
Solid, Left Hand with Lock
DIM "A"
3011⁄32" (77.1 cm)
2723⁄32" (70.4 cm)
Table D
"A" (See Table D)
15⁄32" (2.9 cm)
This side facing interior
1 ⁄16" (4.3 cm) 11
41⁄8" (10.5 cm) 11⁄2" (3.8 cm) typical
DOOR DESCRIPTION
C
15⁄32" (2.9 cm) This side facing interior
MODEL
3 1 ⁄8 " (7.9 cm)
3 1 ⁄8 " (7.9 cm)
"A" (See Table D)
4
13⁄4" (4.4 cm)
14" (35.6 cm)
47⁄8" (12.4 cm)
3
3 1 ⁄8 " (7.9 cm)
CAUTION
Step 4: Assemble the panel to the door
Figure 19 Right Hand Hinged Door 24" (61 cm) wide appliance
1
of
!
r
o do
Depending on your model cut the overlay door panel to the dimensions shown in Figures 13 to 20. Also see Table "D" for the height dimension and door styles. The window cut out is for glass door models only. If your appliance has a lock also drill the lock hole in the panel, see Figure 22. PANEL INSTALLATION
Hinge side of door
1 1 ⁄2 " (3.8 cm) typical
2" (5.1 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places
311⁄16" (9.4 cm)
Figure 18 Left Hand Hinged Door 24" (61 cm) wide appliance
Counter bore lock hole on back side.
#10 x 1/2" screw
Figure 22a
OVERLAY DOOR PANEL INSTALLATION Step 4: Assemble the panel to the door
The preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 12a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1 ⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5 ⁄8" (16 mm) thick shorter screws will have to be obtained. Fasten the! panel to the door with the 10 screws provided in the literature pack. (See Figure 22a). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket into the channels. Be sure the gasket corners are seated properly.
CAUTION
Material Type Material Type Hardwood Softwood Hardwood Softwood
#10 Wood Screw 1
#10 Wood Screw ⁄8" (3.2 mm) Diameter. Pilot Hole ⁄ ⁄ "(2.8 (3.2mm) mm)Diameter. Diameter.Pilot PilotHole Hole
71 648
7 ⁄64 (2.8 Table C mm) Diameter. Pilot Hole
Table C
MODEL
DOOR DESCRIPTION
ML15RAP*RP
Solid, Right Hand
ML15RAP*LP ML15BCF*RP ML15BCF*LP ML15BCP*RP
18
DIM "A"
BRASS EXTENSION Solid, Left Hand
SPRING WASHER
Glass, Right Hand NUT
Glass, Left Hand
LOCK
Solid, Right Hand
ML15BCP*LP
Solid, Left Hand
ML24RAP*RP
Solid, Right Hand
ML24RAP*LP
Solid, Left Hand 1/2 HOLE
CAM
Overlay panel flush with top of door. 3011⁄32" (77.1 cm)
Overlay panel to be centered on width of door.
DEEP ML24BRF*LPBORE 7/16Glass, Left Hand
Solid, Right Hand
INNER DOOR
ML24BRP*LP Holes in Solid, Left Hand 3/4 INCH gasket Glass, Right Hand WOOD PANEL MA24BRF*RP retainer. SECTION A-A with Lock Glass, Left Hand MA24BRF*LP Figure 12a with Lock MA24RAP*RP
Solid, Right Hand with Lock
MA24RAP*LP
Solid, Left Hand with Lock Table D
⁄2" (13 mm) diameter drill through door panel, from other side (see detail above) 13⁄16" (20.5 mm) counter bore, 7⁄16" (11 mm) deep. 1
PHILLIPS SCREW
ML24BRF*RP13/16 COUNTER Glass, Right Hand ML24BRP*RP
31/2" (89 mm)
17 ⁄32" (13.7 mm)
Hinge side of door
!
SCALE 1 : 1
2723⁄32" (70.4 cm) Figure 22
For comprehensive installation instructions, please visit www.marvelrefrigeration.com
