270mb/s / Asi / Sdi 4 Channel Mux Fibre Link Ddt-4220/ddr-4225

Transcript

270Mb/s / ASI / SDI 4 Channel MUX Fibre Link DDT-4220/DDR-4225 I R T Electronics Pty Ltd A.B.N. 35 000 832 575 26 Hotham Parade, ARTARMON N.S.W. 2064 AUSTRALIA National: Phone: (02) 9439 3744 Fax: (02) 9439 7439 International: +61 2 9439 3744 +61 2 9439 7439 Email: [email protected] Web: www.irtelectronics.com DD T- 4 2 2 0 Any 270 Mb/s ± 100ppm DDT-4220 Optical Path Loss 4dB – 32dB DDT-4225 SNMP 1310 nm (1550 nm) SNMP RS 422 < 9600 baud RS 422 < 9600 baud CH1 CH1 CH2 CH2 CH3 CH3 CH4 CH4 LASER FAIL Applications: DD R- 4 2 2 5 RECEIVE FAIL • Multichannel digital with data on a single fibre. • Upgrade capacity of existing fibre. • Maintain timing between related signals by ensuring same path transmission delay. Features: DC DC CAUTION Direct connections to module CAUTION Direct connections to module • 270 Mb/s type signals, such as ASI and N140 • • • • SDI, capability. Automatic cable equalisation for up to 200m on each input. Maximum optical path loss of 32dB. External urgent and non-urgent alarms for system monitoring. Optional plug-in SNMP monitoring module. N140 General: The DDT-4220 accepts up to four 270 Mb/s input signals which may be ASI, SDI or a mixture of each type. The signals need not be phase or frequency synchronous. An optional Simple Network Management Protocol (SNMP) plug-in module is available for remote monitoring of input and output status and alarm states. The signals are time division multiplexed into a single 1.302 Gb/s stream and transmitted via single mode fibre to the DDR-4225 receiver, which performs the reverse operation and restores correct 270 Mb/s timing. The DDT-4220 transmitter comes available with a choice of standard 1310nm laser (order code DDT-4220/1300) or a DFB 1550nm laser (order code DDT-4220/1550). Other wavelengths are available on request. The DDR-4225 receiver is the same regardless of transmitter wavelength. In addition to the four 270 Mb/s channels, a single RS422 channel is included for transmission of auxiliary data at rates of up to 9600 baud. The DDT-4220/DDR-4225 optical system is primarily designed for use with a 9/125µm single mode fibre and will allow an optical path loss from 4dB up to 32dB. 4220-ddt & 4225-ddr.bro.doc The modules are designed to fit IRT’s standard Eurocard frames as well as IRT’s 4000 series frame for use with IRT’s SNMP system and may be used alongside any other of IRT’s analogue or digital Eurocards. 24/02/2005 Technical Specifications DDT-4220: Inputs: Type EQ 4 x 270 Mb/s ±100 ppm, 0.8 Vp-p./ASI/SDI. automatic for up to 250 m of Belden 8281 or equivalent cable. synchronous or asynchronous. BNC 75Ω. Format Connectors RS422: Type Connectors ASI/SDI MUX ASI/SDI DEMUX SK1 SK1 P4 P4 I/P 1 1 x 9600 baud, synchronous or asynchronous. HE 14/8 / matches DN 9. O/P 1 SK2 SK2 Outputs: Power level Connector Alarms: Urgent I/P 2 N/C relay for loss of power, TX lock error or LASER fail. N/C relay if no channels are present. Non-urgent J8 J3 SK4 Type Power Level* Connector SK3 I/P 3 DDR-4225: Inputs: 1 x 1.302 Gb/s optical. -4 dBm to > - 32 dBm. SC/PC. O/P 2 SK3 ALARMS I/P 4 O/P 3 J8 J3 SK4 ALARMS O/P 4 Outputs: Type Format Connectors RS422: Type Connectors 4 x 270 Mb/s ±100 ppm, 0.8 Vp-p./ASI/SDI. synchronous or asynchronous. BNC 75Ω. P2 P2 1 x 9600 baud, synchronous or asynchronous. HE 14/8 / matches DN 9. P3 Alarms: Urgent P3 N/C relay for loss of power, RX lock error or optical input fail. N/C relay if no channels are present. Non-urgent Optical: Optical path loss* Optical fibre Optical wavelength Power requirement: Voltage Consumption 4 dB to 32 dB. Designed for use with 9/125µm single mode fibre. see ordering information. 28 Vac CT (14-0-14) or ±16°Vdc. DDT-4220 <10 VA, DDR-4225 <12.5 VA. Other: Temperature range Ordering Information Mechanical Finish: Front panel Rear assembly Dimensions Supplied accessories Optional Accessories 0 - 50° C ambient DDT-4220/1300 standard 1310 nm model; DDT-4220/1550 DFB 1550nm model. Suitable for mounting in IRT 19" rack chassis with all connections at the rear. Grey background, silk-screened black lettering & red IRT logo. Detachable silk-screened PCB with direct mount connectors to Eurocard and external signals. 6 HP x 3 U x 220 mm IRT Eurocard. Rear connector assembly including matching connector for switcher control. SNMP plug-in module for use with 4000 series frame fitted with SNMP “Agent”. * Note: Optical attenuator must be used for DDR-4225 when optical path loss is less than 4 dB. Due to our policy of continuing development, these specifications are subject to change without notice. Detailed specifications available from: Manufacturer: IRT Electronics Pty Ltd Local Agent: IRT can be found on the Internet at: http://www.irtelectronics.com 26 Hotham Parade ARTARMON N.S.W. 2064 AUSTRALIA Phone: +61 2 9439 3744 Fax: +61 2 9439 7439 Email: [email protected] 4220-ddt & 4225-ddr.bro.doc 24/02/2005 NON-URGENT URGENT 1 x 1.302 Gb/s optical (wavelength dependent on unit ordered). 0 dBm (1 mW) ± 1 dB. SC/PC. NON-URGENT URGENT Type