280 / 680 Series Chairs & Seating Service And Parts Manual

Transcript

Go To Table Of Contents Next 280 / 680 Series Chairs & Seating Model Numbers: 281 -001 thru -004 680 -001 thru -004 Serial Number Prefixes: V, VAE (280 Series) V, VAA (680 Series) Service and Parts Manual FOR USE BY MIDMARK TRAINED TECHNICIANS ONLY SF-1874 Style B Part No. 004-0497-00 Rev. (1/21/16) Section A TROUBLESHOOTING Section B TESTING & REPAIR Section C ACCESS PROCEDURES WIRING DIAGRAMS Symbols .................................... iii Ordering Parts ......................... iii Serial Number Location .......... iii Specifications ........................... iv Warranty Information ............... v Section E General Information GENERAL INFORMATION Section D EXPLODED VIEWS / PARTS LISTS 281 Blood Drawing Chair: Chair Assembly ............................ E-2 Rotating Arm Assembly ............... E-3 Drawer Rotating Arm Assembly .... E-4 Drawer Assembly ......................... E-5 680 Side Chair ......................... E-6 not available not available not available Section E Table Of Contents Back not available FOR USE BY MIDMARK TRAINED TECHNICIANS ONLY Rev. 10/20/15 Go To Table Of Contents General Information Back Symbols Caution Indicates a potentially hazardous situation which could result in injury if not avoided. Equipment Alert Indicates a potentially hazardous situation which could result in equipment damage if not a voided. Note Amplifies a procedure, practice, or condition.  Indicates that the component the check mark appears beside should be tested before replacing it. In Section A, test the components in the order indicated. (ex. 1st  then , 2nd ) Refer to Section B for component testing procedures. Next General Information Ordering Parts The following information is required when ordering parts: • Serial number & model number • Part number for desired part. [Refer to Exploded Views / Parts Lists section] Non-warranty parts orders may be faxed to Midmark using the Fax Order Form in the back of this manual. For warranty parts orders, call Midmark's Technical Service Department with the required information. Hours: 8:00 am until 5:00 pm EST [Monday - Friday] Phone: 1-(800)-Midmark Model / Serial Number Location These symbols are used throughout this manual to represent the operational status of table functions and components. Indicates the function / component is wo rking properly. No action required. Indicates the function / component is w orking, but a problem exists. Serial / Model Number Indicates the function / component is not w orking at all. © Midmark Corporation 2006 SF-1874 iii Rev 10/8/12 Go To Table Of Contents Back Next General Information Specifications Specification 680 281 Weight Capacity: 400 lbs (181 kg) 400 lbs (181 kg) Chair Height (*): 33.5 in. (85.1 cm) 33.5 in. (85.1 cm) Chair Width (w/o arms) : 20.5 in. (52.1 cm) n/a Chair Width (w/ arms) : 23.5 in. (59.7 cm) 30.5 in. (77.5 cm) Chair Width (w/ drawer) : n/a 42.5 in. (108 cm) Inside Arm Width: 17.5 in. (44.5 cm) 21 in. (53.3 cm) Chair Depth: 22 in. (55.9 cm) 24 in. (61 cm) Seat Height: 17 in (43.2 cm)* 20.5 in. (52 cm) 19.5 in. (49.5 cm) Seat Width: Arm Swing Radius: n/a 13.5 in. (34.3 cm) Arm Height Adjustment: n/a 5 in. (12.7 cm) Drawer Height (from floor) : n/a 28 to 33 in. (71 to 84 cm) Drawer Size: n/a 8.5 x 15.25 x 4.5 in. (22 x 39 x 12 cm) Seat Cushion Dimension: 18 in. W x 19.5 in. D (45.7 x 49.5 cm) 20 in. W x 16.5 in. D (51 x 42 cm) Seat Cushion Thickness: 2 in. (5.1 cm) 2 in. (5.1 cm) Back Cushion Dimension: 18 in. W x 13.5 in. H (45.7 x 34.3 cm) 20 in. W x 16.5 in. H (51 x 42 cm) (*) Height is based on leveling screws adjusted in middle of adjustment range. iv 281 © Midmark Corporation 2006 SF-1874 Rev. 10/12 680 Cleaning • Clean upholstery with diluted bleach solution. Ratio: 10:1 (water:bleach) • Clean the chair as necessary, wiping the painted metal and plastic surfaces with a clean, soft cloth, and mild cleaner . Periodic applications of common fur niture wax will ease cleaning and maintain the finished luster of the chair . Go To Table Of Contents Back Next General Information Warranty Information SCOPE OF WARRANTY Midmark Corporation (“Midmark”) warrants to the original purchaser its new Alternate Care products and components (except for components not warranted under “Exclusions”) manufactured by Midmark to be free from defects in material and workmanship under normal use and service. Midmark’s obligation under this warranty is limited to the repair or replacement, at Midmark’s option, of the parts or the products the defects of which are reported to Midmark within the applicable warranty period and which, upon examination by Midmark, prove to be defective. Additional Information Failure to follow the guidelines listed below will void the warranty and/or render the table unsafe for use. • If a malfunction is detected, do not use the table until necessary repairs are made. • Do not attempt to disassemble table, replace components, or perform adjustments unless you are a Midmark authorized service technician. • Do not use another manufacturer's parts to replace malfunctioning components. Use only Midmark replacement parts APPLICABLE WARRANTY PERIOD The applicable warranty period, measured from the date of delivery to the original user, shall be one (1) year for all warranted products and components. EXCLUSIONS This warranty does not cover and Midmark shall not be liable for the following: (1) repairs and replacements because of misuse, abuse, negligence, alteration, accident, freight damage, or tampering; (2) products which are not installed, used, and properly cleaned as required in the Midmark “Installation” and or “Installation / Operation Manual for this appli cable product. (3) products considered to be of a consumable nature; (4) accessories or parts not manufactured by Midmark; (5) charges by anyone for adjustments, repairs, replacement parts, installation, or other work performed upon or in connection with such products which is not expressly authorized in writing in advance by Midmark. EXCLUSIVE REMEDY Midmark’s only obligation under this warranty is the repair or replacement of defective parts. Midmark shall not be liable for any direct, special, indirect, incidental, exemplary, or consequential damages or delay, including, but not limited to, damages for loss of profits or loss of use. NO AUTHORIZATION No person or firm is authorized to create for Midmark any other obligation or liability in connection with the products. THIS WARRANTY IS MIDMARK’S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. MIDMARK MAKES NO IMPLIED WARRANTIES OF ANY KIND INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS. SF-1487 REV. A1 v © Midmark Corporation 2006 SF-1874 Go To Table Of Contents Back General Information vi © Midmark Corporation 2006 SF-1874 Next Go To Table Of Contents Section E Back Rev. 10/20/15 Exploded Views & Parts Lists Next Model Page 281 Blood Drawing Chair: Chair Assembly ................................. E-2 Rotating Arm Assembly ..................... E-3 Drawer Rotating Arm Assembly ........ E-4 Drawer Assembly .............................. E-5 680 Side Chair ..................................... E-6 E-1 Go To Table Of Contents Back Next Refer To: Page 281: Rotating Arm Assembly ............ E-3 281: Rotating Arm Assembly ............ E-4 281: Drawer Assembly ...................... E-5 Color Selector .......... www.midmark.com 9 8 1 1 Std: 028-0548-00 Cal 133: 028-0711-00 2 030-1517-00-216 4 3 ATTENTION: Refer to Current Color Options link for appropriate numbers to replace -xxx. 7 053-0105-13 Item 1 053-0373-00-216 6 4 029-2476-00 5 E-2 2 3 4 5 6 7 8 9 281 Blood Drawing Chair © Midmark Corporation 2005 SF-1874 Rev. 1/21/16 Models: Serial Numbers: MA751200i 281 (all) V2200 thru V1483909 281 (all) VAE000001 thru Present Description Qty. Upholstered Pad - specify color ................ 1 (Qty. of 2 to replace both seat and back) Chair Weldment ........................................... 1 Refer to: "281: Rotating Arm Assembly" . Ref Knob Assembly ............................................ 2 Serial Number Label .................................... 1 Chair Tip ....................................................... 4 Velcro Loop .................................................. 4 Refer to: "281: Drawer Assembly" ........... Ref Refer to: "281: Drawer Rotating Arm Assy" ........................................... Ref Always Specify Model & Serial Number Go To Table Of Contents Back Next Refer To: ATTENTION: Refer to Current Color Options link for appropriate numbers to replace -xxx. Std: 029-3941-00 Cal 133: 029-3941-01 Color Selector .......... www.midmark.com Std: 028-0460-00 Cal 133: 028-0712-00 2 1 3 4 030-1236-00-216 040-0010-56 8 016-0392-12 5 016-0323-00 030-1237-00-216 7 Item 042-0056-00 1 6 2 3 4 5 6 7 8 MA752500i Models: Serial Numbers: Page 281 (all) V2200 thru V1483909 281 (all) VAE000001 thru Present Description Qty. Rotating Arm Assembly - specify color (includes items 2 thru 8) ............................ 1 • Upholstered Pad - specify color .............. 1 • Pivot Weldment ......................................... 1 • Screw (#10-24 x 5/8") ............................... 4 • Post Weldment .......................................... 1 • Retaining Ring ........................................... 1 • Indexing Plunger ....................................... 1 • DU Flange Bearing .................................... 1 Always Specify Model & Serial Number 281: Rotating Arm Assembly © Midmark Corporation 2005 SF-1874 Rev. 11/13 E-3 Go To Table Of Contents Back Next Refer To: Page Color Selector .......... www.midmark.com ATTENTION: Refer to Current Color Options link for appropriate numbers to replace -xxx. Std: 028-0460-00 Cal 133: 028-0712-00 2 1 3 4 10 016-0392-12 016-0323-00 9 030-1236-00-216 040-0010-56 5 030-1237-00-216 6 045-0001-46 7 041-0312-01 Item 042-0056-00 8 1 2 3 4 5 6 7 8 9 10 MA9808i E-4 281: Drawer Rotate Arm Assembly © Midmark Corporation 2005 SF-1874 Rev. 10/20/15 Models: Serial Numbers: 281 (all) V2200 thru V1483909 281 (all) VAE000001 thru Present Description Qty. Rotating Arm Assembly - specify color (includes items 2 thru 10) ......................... 1 • Upholstered Pad - specify color .............. 1 • Pivot Weldment ......................................... 1 • Screw (#10-24 x 5/8") ............................... 4 • Post Weldment .......................................... 1 • Washer (5/16") .......................................... 1 • Nut (#18) ................................................... 1 • Retaining Ring ........................................... 1 • Indexing Plunger ....................................... 1 • DU Flange Bearing .................................... 1 Always Specify Model & Serial Number Go To Table Of Contents Back Next Refer To: 2 Std: 002-1064-00 Cal 133: 002-1064-01 Page Color Selector .......... www.midmark.com 063-9923-00-216 1 3 16 045-0001-46 4 016-0845-00 3 5 061-0952-00 14 6 016-1057-04 041-0312-01 7 13 050-6885-00-216 050-6886-00-216 8 ATTENTION: Refer to Current Color Options link for appropriate numbers to replace -xxx. Item 1 029-2335-01 12 8 9 15 042-0010-04 040-0010-48 050-7585-00-216 8 10 11 016-1057-03 029-3676-00-xxx MA752601i Models: Serial Numbers: 281 (-002 & -004) V2200 thru V1483909 281 (-002 & -004) VAE000001 thru Present 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Description Qty. Drawer Assembly - specify color (includes items 2 thru 15) .......................... 1 • Drawer Top ................................................ 1 • Washer .................................................... 10 • Rubber Bumper ......................................... 2 • Nut (Esna) ................................................. 2 • Slide Support ............................................. 2 • Drawer Cover ............................................ 1 • Pop Rivet ................................................... 8 • Screw ......................................................... 4 • Cabinet Slide (right) .................................. 1 • Drawer Assembly ...................................... 1 • Drawer Handle (includes screws) ............. 1 • Cabinet Slide (left) ..................................... 1 • 281 Label ................................................... 1 • Strap (Later Models Only) ......................... 1 • Refer to: "281: Drawer Rotating Arm Assy" ........................................... Ref Always Specify Model & Serial Number 281: Drawer Assembly © Midmark Corporation 2005 SF-1874 E-5 Rev. 10/20/15 Go To Table Of Contents Back Next Refer To: Page Color Selector .......... www.midmark.com 9 053-1506-00 10 002-1932-00 8 11 a) 002-0910-00-xxx b) 002-0977-00-xxx 002-1932-01 1 7 a) 002-0910-02-xxx b) 002-0977-02-xxx a) 002-0910-01-xxx b) 002-0977-01-xxx 2 ATTENTION: Refer to Current Color Options link for appropriate numbers to replace -xxx. 3 NOTE: 029-3445-00 (Fastener Pack) includes Items 6 & 8 (20 each). Item 1 6 2 3 016-1074-00-312 4 016-1074-01-312 5 4 5 6 7 8 9 10 11 Description Always Specify Model & Serial Number E-6 680 Side Chair © Midmark Corporation 2005 SF-1874 Models: Serial Numbers: Rev. 10/20/15 680 680 V2200 thru V1401937 VAA000001 thru Present Qty. Upholstery Set (includes item 2 & 3) a) Standard ................................................. 1 b) CAL 133 .................................................. 1 • Back Upholstery: a) Standard ............................................... 1 b) CAL 133 ............................................... 1 • Seat Upholstery: a) Standard ............................................... 1 b) CAL 133 ............................................... 1 Leveling Foot (front) ..................................... 2 Leveling Foot (back) .................................... 2 Screw (5 mm x 32 mm) ............................... 4 Chair Weldment (n/a) ................................... 1 Screw (6 mm x 45 mm) ................................ 4 Plug (models w/o arms only) ....................... 4 Right Chair Arm ........................................... 1 Left Chair Arm .............................................. 1 Go To Table Of Contents Back Next COMMENTS The Technical Publications Department of Midmark Corporation takes pride in its manuals. We are sure that our manuals will fill all your needs when you are performing scheduled maintenance, servicing, or repairs on a Midmark product. However, if you find any errors or feel there should be a change, addition, or deletion to the manuals, please let us know. We will correct any errors that we are made aware of and we will review requests for changes, additions, or deletions to the manuals and incorporate those requests deemed appropriate. If you see something in one of our manuals that you like or dislike, please let us know. Also, if there is something you feel we could do to produce a better manual, please let us know. If an error is found, please list the page and paragraph/figure in which the error was found along with a brief description of what the error is. If the correction to the error is known, please include that information also. If a change, addition, or deletion is being requested, please list the page and paragraph/figure needing the change, along with a brief description of how you feel the paragraph/figure should be changed. Please fax or mail a copy of this completed comment sheet to: Page Number Paragraph/Figure Midmark Corporation ATTN: Technical Publications Dept. 60 Vista Drive Versailles, Ohio 45380 Fax: (937) 526-5542 Description Go To Table Of Contents Back SERVICE PARTS FAX ORDERING FORM IMPORTANT NOTES: 1) Use this form for all non-warranty orders only. Warranty orders must be telephoned in (1-800-643-6275). (Do not tear out this page. Photo copy this page for use only.) DATE: 4) All underlined headings should be filled in prior to submittal. / / am pm TIME: METHOD OF SHIPMENT: PRIORITY: NON-EMERGENCY ORDER {to ship within 72 hours if part(s) are in stock.} DEALER P.O. #: 3) All emergency orders must be received @ Midmark by 1:00 pm EST. EMERGENCY ORDER {to ship within 24 hours if part(s) are in stock.} [see note 3] MODEL #: ACCOUNT #: SERIAL #: SALES ORDER # (if applicable) NAME: SHIP TO: ADDRESS: CITY: STATE: ZIP: CONTACT: PHONE: FAX #: LINE # PART NUMBER QTY. DESCRIPTION COLOR (if applicable) ADDITIONAL COMMENTS: ATTENTION: CUSTOMER SERVICE DEPARTMENT 2) FAX number to send order to: 877-249-1793 Next CREDIT CARD INFORMATION CARD TYPE __________________________ _ CARD #_________-_________-_________-_________ NAME ON CARD ___________________________________________ EXP. DATE ______ / ______ / ________ SIGNATURE_______________________________________________________ Back Go To Table Of Contents Next Back Midmark Corporation 60 Vista Drive P.O. Box 286 Versailles, OH 45380-0286 937-526-3662 Fax 937-526-5542 www.midmark.com Go To Table Of Contents