Preview only show first 10 pages with watermark. For full document please download

284-1x Series L-band Splitters

   EMBED


Share

Transcript

DATA SHEET CROSS TECHNOLOGIES, INC. Rev. B 01/18/12 284-1X Series L-Band Splitters The Model 284-1X RF Splitters are five or nine way, 950 - 2150 MHz, 0 dB gain splitters. The 284-1X splitters provide fused DC power insertion on the RF input connector center pin, surge protection, and excellent RF characteristics. Each splitter has a monitor connector on the front panel and four or eight outputs on the back panel. A SiDactor surge suppressor on the RF input protects against high voltage transients. On the front panel, green LEDs indicate the presence of DC voltage from the 115 VAC wall mount power supply and +18VDC power to the LNB (on J9 input center pin). Up to three 284ʼs can be mounted on an 1 3/4” X 19” rack mount panel (option -R1, -R2, or -R3). LNB FUSE F1 284 SPLITTER CROSS TECHNOLOGIES, INC. LNB VOLTAGE RF MONITOR ON GND +DC POWER DC J12 IN J9 OUT J1 OUT J2 OUT J3 OUT J4 OUT J8 OUT J7 OUT J6 OUT J5 ON 284-19 Front and Rear Panels EQUIPMENT SPECIFICATIONS* Input Characteristics Input Impedance Return Loss Input Level Output Characteristics Impedance Return Loss In-Band Characteristics Gain Frequency Response Port to Port Isolation Indicators Power LNB DC Voltage Other LNB DC voltage Output LNB current Surge Suppressor RF connectors Power Size (Bench Top) Options -R1,-R2, or -R3 -C -P2 -B -D -W9 Models 284-15 284-19 950 to 2150 MHz 75Ω 12dB min, 14dB typ -20 dBm total maximum SURGE SUPPRESSOR DC INS FUSE S P L I T T E R LNB LED 75Ω 12dB min, 14dB typ LNB TP OUT 1 OUT 2 OUT 8 MON 950 to 2150 MHz 284-19 SPLITTER 0 dB ± 1.0 dB ± 1.0 dB, 950-2150 MHz; ± 0.5 dB, any 20 MHz increment > 18dB, 20dB typ Green LED indicates DC voltage prior to diode OR Green LED indicates LNB power insertion on splitter input (J9) 18 ± 2 VDC 300 ma, max SiDACTOR Type F (female) 115 VAC wall mount power supply 4.7” Wide x 1.75” High X 6.5” Deep Rack mounting (mounted on a 19-inch standard (1RU) panel, 1.75” high x 7.0” deep) No wall mount power supply (use Model 2000-02 power supply) 100-240 ±10% VAC wall mount power supply BNC Female, 75Ω for RF Connectors BNC Female, 50Ω for RF Connectors 10MHz pass through (J9 toJ8) One 5-way splitter One 9-way splitter *10˚C to 40˚C; Specifications subject to change without notice Cross Technologies, Inc. • 6170 Shiloh Road • Alpharetta, GA 30005 www.crosstechnologies.com • 770.886.8005 • FAX 770.886.7964