2inch Tripod User Guide V9 - Rolatube | Expeditionary Systems

Transcript

Extending Technology 2” Tripod System User Guide 1 & 2m 2” Diameter Tripod Systems • For use with 3” diameter masts or stand-alone • Lightweight • Compact • Versatile Components Overview Item Description 1 3 x RolaTubes 6 1 2 Tripod Head Mount with Leg Locking Screw and Spigot Locking Screw 3 Leg Locking Screw 4 Spigot (top load) Locking Screw 5 Rock Pegs x 3 3 4 2 9 7 8 6 Bag 7 8 Leg Ties (adjustable) Central Pull Down Tie 10 11 5 9 Feet 10 Single Tripod Adaptor (optional) 11 Double Tripod Adaptor (optional) 2” Tripod System User Guide / V9. Issue January 2017 Page 01 Deployment Instructions 1. Release leg locking screw and position tripod head unit on the ground 2. Unroll tubes and lay on the ground with join face down as shown 3. Slide tubes into the head unit 4. Attach the feet 5. Attach the leg ties to the feet 6. Attach the required kit or the optional adaptor correctly and securely to the head unit and walk the tripod up under control 7. Adjust the leg ties between the feet to ensure the system is correctly braced and level 8. If additional wind stability required, connect all 3 pull down cord clips to the underside of the head and tie to ground anchor or the weighted bag. Do not exceed 2kg of download force. 9. Peg down the feet using the rock pegs or (if on concrete) place sandbags over the feet 10. Tighten leg locking screw only until tripod head unit firm. Do not over tighten. Continued over 2” Tripod System User Guide / V9. Issue January 2017 Page 02 Deployment Instructions With Mast 1. Insert the head unit into the adaptor – this fits both single and double 3” mast systems. 2. Elevate the mast to the correct height 3. O  nce at the correct height close the jaws of the adaptor around the mast 4. Secure the clamp to the mast 2” Tripod System User Guide / V9. Issue January 2017 Page 03 Product Components Tripod System 1m 2” Multicam / 953-201000-1-1 / NSN 5985-99-577-4921 Product code Description NATO Stock Number Quantity 900-201000-1-0 1m 2” Mast Multicam 5985-99-750-5740 3 900-201000-3-0 1m 2” Mast Black 3 207-000090 Tripod central pull down tie assy 1m system 5985-99-555-2616 1 207-000089 Tripod feet ties assy for 1m system x 3 5985-99-985-0909 1 207-002001 Rock Pegs 4030-99-160-7145 3 209-000003 Manual for 1m and 2m tripod system 7610-99-742-6759 1 502-003050 Medium black bag 5985-99-508-3269 1 800-000007 Tripod head unit assy 5985-99-958-9830 1 800-000009 Tripod foot assy 5985-99-382-2423 3 Total packed weight: 4kg Dimensions: 28 x 33 x 25cm Tripod System 2m 2” Multicam / 953-202000-1-1 / NSN 5985-99-154-2465 Product code Description NATO Stock Number Quantity 900-202000-1-0 2m 2” Mast Multicam 5985-99-841-3887 3 900-202000-3-0 2m 2” Mast Black 3 207-000080 Tripod central pull down tie assy 2/3m 5985-99-512-2412 1 207-000082 Tripod feet ties assy for 2m system x 3 5985-99-841-3885 1 207-002001 Rock Pegs 4030-99-160-7145 3 209-000003 Manual for 1m and 2m tripod system 7610-99-742-6759 1 502-003050 Medium black bag 5985-99-508-3269 1 800-000007 Tripod head unit assy 5985-99-958-9830 1 800-000009 Tripod foot assy 5985-99-382-2423 3 Total packed weight: 5.3kg Dimensions: 28 x 33 x 25cm Continued over 2” Tripod System User Guide / V9. Issue January 2017 Page 04 Product Components Continued Mast System RolaTube Part Number 3m 3” Single Mast/2m Tripod/Adaptor Multicam 957-201003-1-1 3m 3” Single Mast/2m Tripod/Adaptor Black 957-201003-3-1 4m 3” Single Mast/2m Tripod/Adaptor Multicam 957-201004-1-1 4m 3” Single Mast/2m Tripod/Adaptor Black 957-201004-3-1 5m 3” Single Mast/2m Tripod/Adaptor Multicam 957-201005-1-1 5m 3” Single Mast/2m Tripod/Adaptor Black 957-201005-3-1 7m 3” Single Mast/2m Tripod/Adaptor Multicam 957-201007-1-1 7m 3” Single Mast/2m Tripod/Adaptor Black 957-201007-3-1 NATO Stock Number 3m3” Double Mast/2m Tripod/Adaptor Multicam 957-201033-1-1 3m3” Double Mast/2m Tripod/Adaptor Black 957-201033-3-1 4m3” Double Mast/2m Tripod/Adaptor Multicam 957-201044-1-1 4m3” Double Mast/2m Tripod/Adaptor Black 957-201044-3-1 5m3” Double Mast/2m Tripod/Adaptor Multicam 957-201055-1-1 5m3” Double Mast/2m Tripod/Adaptor Black 957-201055-3-1 Optional Accessories RolaTube Part Number NATO Stock Number 800-000012 / Double Mast Adaptor Adaptor for 3” Single Masts Required as an additional item to secure a single mast to the tripod 800-000008 5985-99-841-3889 Adaptor for 3”Double Masts Required as an additional item to secure a double mast to the tripod 800-000012 Spigot / Antenna Adaptor 207-000035 5985-99-976-9292 Antenna Side Mount (Radwin) 800-000010 5985-99-669-2250 Antenna Mount (Aruba) 800-000106 Antenna Mount (Cambium) 800-000032 Antenna Mount (Cisco) 800-000034 Twin Antenna T Bar Mount 800-000036 Please note that ALL optional accessories can only be used with a mast / tripod system. 2” Tripod System User Guide / V9. Issue January 2017 Page 05 Application Examples Tripod with surveillance system Single 3” mast system supported by tripod Tripod with surveillance system Double 3” mast system supported by tripod 2” Tripod System User Guide / V9. Issue January 2017 Page 06 Health & Safety The system is rated to the loads stated and the end user is responsible for ensuring that user guides are followed and that loads are secured to the mast in a fashion that is safe and does not compromise the mast itself. RolaTube Expeditionary Systems does not accept liability or provide any warranty for usage not covered in this document. Ensure these steps are followed to prevent risk of the tripod falling over and causing injury: • The tripod must not be set up beneath or near live overhead electricity lines • In high winds ensure that the pull down load, the pegs or sandbags on the feet are all secure. • The tripod legs should not be extended beyond the reach of the leg ties nor placed so close together that the ties are slack Maximum Loads Tripod System 1m 2” Multicam Max top load 30kg Tripod System 2m 2” Multicam Max top load 20kg Max wind speed = 60mph* • The locking screw should be loosened before moving the tripod Products have been designed and tested to be compliant with the relevant aspects of MIL-SPEC810G *Maximum wind loading is based on the bare mast correctly deployed and with guy pegs firmly positioned. End user or system integrator must take responsibility for deployment and ensuring that the final system is fit for purpose with regard to wind loadings once top load or other equipment is mounted. Disclaimer: RolaTube Expeditionary Systems expressly disclaims responsibility for loss or damage caused by use of its products other than in accordance with proper operating procedures. RolaTube Expeditionary Systems Ltd 130 Wellworthy Road, Ampress Park, Lymington Hampshire SO41 8JY, UK t: 01590 688019 e: [email protected] www.rolatube-expeditionary-systems.com 2” Tripod System User Guide / V9. Issue January 2017 www.flickr.com/photos/rolatubeexpeditionarysystems Registered in England & Wales No. 8833973 VAT Reg 181 483 204 Page 07