Transcript
2M-701E-PD/af
DESIGNED FOR LIFE
Single Port PoE Splitter/af
2M-701E-PD/afProduct: PoE Splitter
Model: 2M-701E-PD/af Description: This is a PoE Ethernet & power splitter device which is based on IEEE802.3 af, it can work with PoE power supply device (such as PoE switch) which meet the IEEE802.3af standard and provide the network and power for the device which can not support PoE. This product is widely used in security surveillance and network engineering.
【Certification】
【Features】 1. Power Supply: Compatible with mode A (End-Span) and mode B(Mid-Span); 2. Standard: IEEE 802.3 af, IEEE 802.3, IEEE 802.3u; 3. Power Output: DC5V, DC9V, DC12V optional; 4. Appearance and Structure: Compact size, easily install; 5. Operation: Plug and play, no need settings.
【Specification】 Item Protocol Power Supply Power Consumption Input Voltage Output Voltage Output Ripple Ethernet Port Transmission Speed Ethernet Port Transmission Medium Transmission Distance Input PoE Power Indicator LED Status Indicator Output DC Power Indicator PoE Power Supply
Protection
Environmental
Mechanical Stability 【Connection】
ESD Working Temperature Storage Temperature Humidity (non-condensing) Dimension (L×W×H) Material Color Weight MTBF
Description IEEE803.2af Compatible Mode A (End-Span) and Mode B (Mid-Span) ≤13W PoE 36V-57V DC5V, DC 9V, DC 12V Optional <5% 1×RJ45 Input 10/100Mbps Cat5/5e/6 Standard Network Cable 100m (Maximum) 1 (POE IN Port RJ45 Yellow Light) 1 (Ethernet Port RJ45 Yellow Light) 1a Contact discharge Level 3 1b Air discharge Level Per: IEC61000-4-2 0℃~45℃ -40℃~70℃ 0~95% 80mm×55mm×28mm Plastic Black 65g >30000h
【Application】
【Installation Steps】 1) Please turn off the signal source and the device's power, installation with power on may damage the device; 2) Use a network cable to connect the PoE switch, and connect the other side with the splitter's PoE IN port; 3) Use another network cable to connect the IP camera with the PoE splitter's ethernet port; 4) Connect the DC power line with the splitter's DC port, and connect the other side to the IP camera's power port. Adjust to the proper voltage, DC 12V for example; 5) Check if the instSingle Port PoE Splitter/af 6) Make sure all the network devices have power supply and they are working normal. 【Scenario】 1. Office System 2. Townhouse
【Accessories】 1. Single Port PoE Splitter 1pc 2. DC Power Line 1pc 3. User Manual 1pc 2M Technologies Co., Ltd. 802 Greenview Dr Ste 100 , Grand Prairie TX 75050 USA Tel: +1 972-206-1212 Email:
[email protected] www.2mtechnology.net
