Transcript
Technical sheet 1/2
2nights Wall light | topLED 3.5W 220 - 240V | CRI 90 7975
Technical data
Finiture
Collection
Ma[&]De
Finishing
embossed
Type
Wall light
Material
Aluminium
Installation position
Wall lights
Color
white RAL 9003
Installation environment
Indoor
Processing
Coating
Light Source
LED
Material
PC
Circuit structure
topLED
Color
transparent
Light colour
Warm white
Finishing
embossed
Optic
Diffused
Material
Aluminium
Light emission direction
upward
Color
white RAL 9003
Power
3.5 W
Processing
Coating
Luminous flux (source)
363 lm
Frequency
50 - 60 Hz
CCT
3000 K
Colour rendering index
90 Ra
Code
KIT0035
Safety class
1
Type
Diffuser
IP
IP20
IK
No
Glow wire test
850°
Operating temperature
70 °C
Direct mounting on normally flammable surfaces
Yes
CE
Yes
ETL
No
Emergency mode
No
Directional
Yes
Pivoting / Tilting
Yes
Walk-over
No
Drive-over
No
Cable included
No
Resin potting
No
Net weight
0.580 kg
Volume
0.01 m³
Dimensioni imballo
260x145x270x-- mm
Numero Colli
1
casing
diffuser
mounting frame
Accessories
Rev. 00 - 22.04.2016
Technical sheet 2/2
2nights Wall light | topLED 3.5W 220 - 240V | CRI 90 7975
Single emission for indoor application. The warm white LED light source
Caratteristiche Illuminotecniche
with a diffused light distribution features a upward emission and is
Light Output Ratio (LOR)
42 %
composed of 1 topled LEDs with CCT of 3000 K and a CRI 90; the
Luminous flux (source)
363 lm
source luminous flux is 363 lm, with a 129.6 lm/W nominal luminous
Luminaire luminous flux
156.07 lm
efficacy and an operating lifetime (L80) of 80000 hours.
Consumption
3.5 W
Luminaire efficacy
42 lm/W
Colour temperature
3000 K
Standard Deviation of Colour Matching
3 stepMcAdam
Colour rendering index
90 Ra
Junction temperature (lighting fixture)
80 °C
Luminous flux maintenance (lighting fixture)
L80 @ 80k hrs
Failure Rate
B20 @ 80k hrs
Standard Operating Ambient Temperature
25 °C
The device body is made of aluminium and features a white ral 9003 finish, processed by means of coating; the diffuser is made of PC; the mounting frame is made of aluminium, with a white ral 9003 finish, processed by means of coating. The ingress protection degree is IP20; the total weight is of 0.580 kg. The power supply driver is included in the delivery.
The total absorbed power is 3.5 W and is provided by a specific driver with operating range 220V - 240V / 50Hz - 60Hz. The device features protection class I and can be wall lights-mounted.
Rev. 00 - 22.04.2016 Powered by TCPDF (www.tcpdf.org)
Technical sheet 1/2
2nights Wall light | topLED 3.5W 220 - 240V | CRI 90 7977
Technical data
Finiture
Collection
Ma[&]De
Finishing
embossed
Type
Wall light
Material
Aluminium
Installation position
Wall lights
Color
black RAL 9005
Installation environment
Indoor
Processing
Coating
Light Source
LED
Material
PC
Circuit structure
topLED
Color
transparent
Light colour
Warm white
Finishing
embossed
Optic
Diffused
Material
Aluminium
Light emission direction
upward
Color
black RAL 9005
Power
3.5 W
Processing
Coating
Luminous flux (source)
363 lm
Frequency
50 - 60 Hz
CCT
3000 K
Colour rendering index
90 Ra
Code
KIT0036
Safety class
1
Type
Diffuser
IP
IP20
IK
No
Glow wire test
850°
Operating temperature
70 °C
Direct mounting on normally flammable surfaces
Yes
CE
Yes
ETL
No
Emergency mode
No
Directional
Yes
Pivoting / Tilting
Yes
Walk-over
No
Drive-over
No
Cable included
No
Resin potting
No
Net weight
0.580 kg
Volume
0.01 m³
Dimensioni imballo
260x145x270x-- mm
Numero Colli
1
casing
diffuser
mounting frame
Accessories
Rev. 00 - 22.04.2016
Technical sheet 2/2
2nights Wall light | topLED 3.5W 220 - 240V | CRI 90 7977
Single emission for indoor application. The warm white LED light source
Caratteristiche Illuminotecniche
with a diffused light distribution features a upward emission and is
Light Output Ratio (LOR)
42 %
composed of 1 topled LEDs with CCT of 3000 K and a CRI 90; the
Luminous flux (source)
363 lm
source luminous flux is 363 lm, with a 129.6 lm/W nominal luminous
Luminaire luminous flux
156 lm
efficacy and an operating lifetime (L80) of 80000 hours.
Consumption
3.5 W
Luminaire efficacy
42 lm/W
Colour temperature
3000 K
Standard Deviation of Colour Matching
3 stepMcAdam
Colour rendering index
90 Ra
Junction temperature (lighting fixture)
80 °C
Luminous flux maintenance (lighting fixture)
L80 @ 80k hrs
Failure Rate
B20 @ 80k hrs
Standard Operating Ambient Temperature
25 °C
The device body is made of aluminium and features a black ral 9005 finish, processed by means of coating; the diffuser is made of PC; the mounting frame is made of aluminium, with a black ral 9005 finish, processed by means of coating. The ingress protection degree is IP20; the total weight is of 0.580 kg. The power supply driver is included in the delivery.
The total absorbed power is 3.5 W and is provided by a specific driver with operating range 220V - 240V / 50Hz - 60Hz. The device features protection class I and can be wall lights-mounted.
Rev. 00 - 22.04.2016 Powered by TCPDF (www.tcpdf.org)
