Preview only show first 10 pages with watermark. For full document please download

2n® Mobile Audio Gateway Public Address System

   EMBED


Share

Transcript

2N® Mobile Audio Gateway 2N IP audio 2N® Mobile Audio Gateway Connect instantly to your audio system from your mobile phone, wherever you are. Make a call to the mobile gateway with its SIM card and broadcast live without any delay. 2N® Mobile Audio Gateway is your rapid solution in critical situations that require an immediate response. PA systems Shops Schools Sports facilities Health care services Parking and secure zones Offices and warehouses Other public spaces Reporting from any location Broadcast live to your audio system from anywhere, including places without a land-line. You only need GSM or 3G signal coverage. Override mode setting You can give this mobile reporting overriding priority thanks its in-built relay. Back-up power source You can rely on the functionality of the device, no matter what happens. For power outage situations there is a battery backup option available. Disaster recovery situations You can instantly issue an announcement to advise of a lost child, call the on-site doctor or declare a state of evacuation. Plug & play installation You can easily connect your devices to your radio or evacuation control panel, avoiding complicated setting-up. Extending the audio systems The device easily links with traditional analogue and/or modern IP audio systems. Save time You can immediately connect to your audio system without having to move to a microphone. Integration to other systems The device is easily integrated into third-party systems by means of a standard audio cable. Secure access Simply set up the authorized phone numbers from which announcements can be made. DIAGRAM FEATURES & BENEFITS 2N® Mobile Audio Gateway relay OVERRIDE cellular phone mobile NETWORK 2N® MOBILE AUDIO GATEWAY PUBLIC ADDRESS SYSTEM speakers TECHNICAL PARAMETERS 3,5 mm JACK GSM Interface  Power supply  GSM module MC55i-w Mains power Adapter rated 110-230 V/12 V, 1 A GSM bands EGSM 850/ EGSM 900/ GSM 1800/ GSM 1900 MHz DC power supply 10 to 16 V DC Consumption (12V) 90 mA at rest During a call – typically 300 mA, max. 400 mA DC Jack 5.5/2.1 mm, centre pole positive Transmission power 2 W EGSM 850 / 900 MHz, 1W GSM 1800 / 1900 MHz Receiving sensitivity -105dBm Power connector Audio Half rate, Full rate, Enhanced full rate, Echo cancellation, Echo suppression If a source is used other than the adapter supplied, it must be SELV compliant. Antenna 850/ 900/ 1800/ 1900 MHz 50 Ω Antenna connector SMA Batteries  SIM card 3 V or 1.8 V plug-in Battery type AA size rechargeable NiMh battery Number of items 4 Battery drain During a call – typically 600 mA, max 1000 mA Typically 70 mA, regulated SOFTWARE Audio interface  Line output Jack 3.5 mm, mono, non-symmetric Output level 0 dBV Charging current Impedance 220 Ω Batteries not included as standard. Switching relay contact  Other parameters  Function Contact closed throughout the call Dimensions Maximum load 500 mA / 125 VAC 300 mA / 110 VDC 2 A / 30 VDC (resistive load) Operating temperature from 0°C to 45°C range 163 x 157 x 38 mm PCManager – universal programming tool 2N TELEKOMUNIKACE a.s., Modřanská 621, 143 01 Prague 4, CZ, +420 261 301 500, [email protected], www.2n.cz