Transcript
Ordering number:ENN4131
NPN Epitaxial Planar Silicon Transistor
2SC4821 High-Definition CRT Display Video Output Driver Applications Applications
Package Dimensions
· High definition CRT display video output driver, wide band amplifier applications and high frequency driver applications
unit:mm 2084B [2SC4821] 1.9
10.5
Features
4.5
2.6 1.4
1.2
1.0
8.5
· High gain bandwidth product (fT=2.0GHz). · Large current capacity (IC=500mA) · Usage of radial taping to meet automatic mounting.
7.5
1.2 1.6
0.5
0.5
1
Specifications
2.5
2
3
1 : Emitter 2 : Collector 3 : Base SANYO : FLP
2.5
Absolute Maximum Ratings at Ta = 25˚C Parameter
Symbol
Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current
Conditions
Ratings
Unit
VCBO VCEO
30
V
20
V
VEBO IC
3 500
V mA
Collector Current (Pulse)
ICP
1
A
Collector Dissipation
PC
1.3
W
150
˚C
–55 to +150
˚C
Junction Temperature
Tj
Storage Temperature
Tstg
Electrical Characteristics at Ta = 25˚C Parameter
Symbol
Conditions
Ratings min
typ
max
Unit
Collector Cutoff Current
ICBO
VCB=20V, IE=0
0.1
µA
Emitter Cutoff Current
IEBO
VEB=2V, IC=0
5.0
µA
hFE1 hFE2
VCE=5V, IC=50mA VCE=5V, IC=500mA
fT
VCE=5V, IC=100mA
DC Current Gain Gain-Bandwidth Product
40* 20 2.0
* : The 2SC4821 is classified by 50mA hFE as follows : Rank
C
D
E
hFE
40 to 80
60 to 120
100 to 200
200* GHz
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 21005TN (PC)/12099HA (KT)/5232MH (KOTO) No.4131–1/3
2SC4821 Continued from preceding page. Parameter
Symbol
Ratings
Conditions
min
typ
Unit
max
Output Capacitance
Cob
VCB=10V, f=1MHz
6.0
Reverse Transfer Capacitance
Cre
VCB=10V, f=1MHz
4.6
IC=300mA, IB=30mA
0.3
0.8
V
IC=300mA, IB=30mA
0.9
1.2
V
Collector-to-Emitter Saturation Voltage
VCE(sat) VBE(sat)
Base-to-Emitter Saturation Voltage
IC -- VCE 2.0mA 1.8mA
500
1.2mA
1.0mA 80
0.8mA 0.6mA
0.4mA
40
0
4
8
12
16
DC Current Gain, hFE
0.2
5
0.4
0.6
0.8
1.0
Base-to-Emitter Voltage, VBE – V
1.2 ITR07542
fT -- IC
5
Gain-Bandwidth Product, fT – MHz
Ta=75°C 25°C --25°C
7
0
ITR07541
VCE=5V
100
VCE=5V
3 2
1.0
3 2
10 7 5 3
5
7
10
2
3
5
7 100
2
3
Collector Current, IC – mA
Reverse Transfer Capacitance, Cre – pF
2
10 7 5
3 2
1.0
2
3
5
7
10
2
Collector-to-Base Voltage, VCB – V
3
5
3
3
5
7
10
2
5
ITR07545
3
5
7 100
2
3
5 7 1000 ITR07544
Collector Current, IC – mA
Cre -- VCB
3
f=1MHz
7
7
2
5 7 1000 ITR07543
Cob -- VCB
3
Output Capacitance, Cob – pF
0
hFE -- IC
2
5
200
20
Collector-to-Emitter Voltage, VCE – V
1.0
300
100
0.2mA IB=0
0
400
25°C --25°C
1.6mA 1.4mA
120
VCE=5V
Ta=75°C
160
pF
IC -- VBE
600
Collector Current, IC – mA
Collector Current, IC – mA
200
pF
f=1MHz
2
10 7 5
3 2
1.0
5
7
1.0
2
3
5
7
10
3
2
Collector-to-Base Voltage, VCB – V
5
ITR07546
No.4131–2/3
2SC4821 VCE(sat) -- IC
1000
Base-to-Emitter Saturation Voltage, VBE (sat) – V
5
3 2
IC / IB=10
2
1.0
100
25
Ta=75°C
7
°C
--25°C
5 3 2 5
7
10
2
3
5
7
2
100
3
7 1000 ITR07547
DC
3
op
2
era
tio
s 1m
IC=0.5A
5
n
0.1 7 5
Ta=25°C Single pulse
3 2
5
7
1.0
5
7
10
2
3
5
7
100
2
3
5
7 1000 ITR07548
PC -- Ta
1.4
ms 10
7
5
1.6
ICP=1A
1.0
75°C
Collector Current, IC – mA
ASO
2
25°C
Ta= --25°C
7
3
5
Collector Current, IC – mA
Collector Dissipation, PC – W
Collector-to-Emitter Saturation Voltage, VCE (sat) – mV
7
Collector Current, IC – A
VBE(sat) -- IC
3
IC / IB=10
1.3 1.2 1.0 0.8 0.6 0.4 0.2
2
3
5
7
10
2
Collector-to-Emitter Voltage, VCE – V
3
5
ITR07549
0 0
20
40
60
80
100
120
140
Ambient Temperature, Ta – ˚C
160
ITR07550
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2005. Specifications and information herein are subject to change without notice. PS No.4131–3/3
