Transcript
DECEMBER 2007 RM425A-R3 RM525A-R2
2U Wallmount Cabinet
Specifications Color: RM425A-R3: Black; RM525A-R2: Beige Interior Mounting Space: 3.5" (2U) Material: 16-gauge, powder-coated steel Size: 20.3"H x 21"W x 4.9"D (51.6 x 53.3 x 12.5 cm) Weight: 24 lb. (10.9 kg)
Package Includes • (1) cabinet • (1) set of keys • (8) 10-32 cuphead screws Before installing the 2U Wallmount Cabinet, check it carefully for shipping damage. If you notice any, contact Black Box immediately at 724-746-5500. (continued on other side)
CUSTOMER SUPPORT INFORMATION
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail:
[email protected]
2U WALLMOUNT CABINET Features • The cabinet holds equipment designed to be placed in 2U (3.5", 8.9 cm) of vertical space in a 19" rack. The cabinet’s mounting rails are near the top of the cabinet and face forward. • You can take cables and power cords in and out of the cabinet through any of its four round side-mounted cable knockouts (two on each side). These knockouts have grommeted edges to protect your cables and are 2" (5.1 cm) in diameter. • It’s ventilated on both sides. • Its door is lockable (but is shipped unlocked) and is hinged on the left. The door does not latch unless it is locked. You should have received two keys for it, taped to the inside of the cabinet. • Its enclosure is 16-gauge, powder-coated steel. • Its outside dimensions are 20.3"H x 21"W x 4.9"D (51.6 x 53.3 x 12.5 cm). Its inside dimensions are only slightly less, because of the thickness of the exterior steel. • It weighs approximately 24 lb. (10.9 kg).
Installation To mount a device in the cabinet, use the same hardware that you would use to mount the device in a 19" rack, but mount the device so it hangs vertically (with its bottom against the back of the cabinet and its front panel facing upward). Use the supplied cuphead screws to secure the device to its rackmount bracket.
Troubleshooting If you have questions about installing the cabinet at your site, contact your site’s facilities or building maintenance personnel, or consult a building contractor. We offer a wide variety of cable management and other accessories that you might find useful for your application. For more information, call Black Box Technical Support at 724-746-5500.
TRADEMARKS USED IN THIS MANUAL BLACK BOX and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
© Copyright 2007. Black Box Corporation. All rights reserved. 1000 Park Drive
•
Lawrence, PA 15055-1018
•
724-746-5500
•
Fax 724-746-0746
