3

Transcript

3 3-1 Attach TV to Wall Plate 3-2 Unlock the Wall Plate Hang Your TV HEAVY! Use assistance with this step. Press the button on wall plate 15 to release the safety latch. VML41 Instruction Manual Use two people to hang the TV, to visually ensure TV bracket 01 is hung correctly onto wall plate 15 (see side view). We’ll Make It Stress-Free IMPORTANT: DO NOT lower TV straight down onto wall If you have any questions along the way, just give us a call. 1-800-359-5520 We’re ready to help! plate 15 -- this will engage the lock. Safety latch must be released for proper installation (See STEP 3-1). 01 Thank you for choosing Sanus! Please take a moment to let us know how we did: 01 15 Call us: 1-800-359-5520 01 15 Find us on Facebook: SANUS Side View Side View 3-3 3-4 Lock the Wall Plate Press down on the safety latch until the button pops up AND you hear a "click". CAUTION: Avoid potential personal injury or property damage! The safety latch must be locked, so the TV is securely fastened to the wall plate 15 . Place magnetic leveling feet 19 in the lower corners of the TV. 14 B If you used spacers 14 in STEP 1-2, stack both magnetic leveling feet 19 together and place in the lower center of the TV. For non-metal back TVs, use adhesivebacked disc 20 . IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this mount is perfect for you! Button 19 19 20 Side View 2 Adjustments Does your TV weigh more than 80 lbs. (36 kg) including accessories? Level 15 Slide the TV side to side. Make sure your TV is locked to wall plate 15 (STEP 3-3). Remove the TV. Loosen both screws 18 , adjust level, then retighten the screws (STEP 2-3). 18 Disconnect your cables. Unlock wall plate 15 (STEP 3-1). Lift the TV up and away. 3 0.20 5.1 1.5° 15.91 404.0 2.95 75.0 0.98 25.0 Concrete kit (#CMK3) required Perfect! Call Customer Service: 1-800-359-5520 INCLUDED Do you have all of the tools needed? 5° 4 Ready to begin? Wood Stud Applications Concrete Applications Awl Pencil Tape Measure Screwdriver Electric Drill Square Driver Bit 1/8 in. (3.2 mm) Wood Drill Bit 5/16 in. (8 mm) Concrete Drill Bit Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service at 1-800-359-5520. 2.77 70.3 CAUTION: Avoid potential personal injuries and property damage! LEVELING 0.34 8.8 Unsure? 15 ( in. [mm] ) 1.12 28.6 Solid concrete or concrete block? Drywall with wood studs? DO NOT install into drywall alone Remove the TV 16.00 406.4 17.75 450.9 Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 to find a compatible mount. What is your wall made of? Stud Finder Dimensions No — Perfect! 80 lbs. (36 kg) CAUTION: Lateral Shift 6901-002447 00 SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA 1 20 Follow us on Twitter @sanussystems ©2015 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. For non-metal back TVs, use adhesivebacked disc 20 . 15 Side View Leave a review: sanus.com Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. No Tilt Feature (OPTIONAL) A Email us: [email protected] 15 15 1.10 27.9 OPTIONAL TILT 3.40 86.4 LATERAL SHIFT ● ● ● ● This product includes directions and hardware for use with wood studs – DO NOT install into drywall alone. The wall must be capable of supporting five times the weight of the TV and mount combined. Do not use this product for any purpose not explicitly specified by manufacturer. Manufacturer is not responsible for damage or injury caused by incorrect assembly or use. 1 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. 01 x1 M4/M5 10 x2 M5 x 12mm 01 M6/M8 Correct 2 M8 x 35mm Parts and Hardware for STEP 2 Wall Plate 15 x1 16 x1 Driver Bit (Square) Wood Screws (Wall Plate Screws) WOOD STUD OPTION 2A M8 x 20mm * (NOT INCLUDED) C1 x2 2-2A Verify Your Wall Min. 1 1/2 in. (38 mm) Max. 5/8 in. (16 mm) Find the Stud Centers 2 1 Min. 3 1/2 in. (89 mm) 3 2-3A Attach the Wall Plate 3 2 1 15 Min. 16 in. (406 mm) 17 property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm). ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm). ● Minimum horizontal space between fasteners: 16 in. (406 mm). ● Stud centers must be verified – not all walls have conventional 16 in. (406 mm). Locate the studs using a stud finder. Probe the wall with an awl or drill bit to verify the stud edges. Mark the center of both studs. 18 16 15 CAUTION: Avoid potential personal injuries and 2-1B Fischer UX8x50R Anchor Parts for STEP 3 (OPTIONAL) Disc (Adhesive backed) 20 x2 ** medical device such as a pacemaker or implantable cardioverter defibrillator WARNING: This product contains a magnet. If an implanted (ICD) is in use, magnetic fields may affect the operation of those devices, resulting in serious injury or death. If you have an implanted medical device, keep at least 13 cm (5 in.) between your device and the magnet. Please consult with your physician or medical professional prior to using this product. CONCRETE OPTION 2B For concrete installations: Contact customer service at 1-800-359-5520 to have these anchors shipped directly to you. 19 x2 02 03 Min. 16 in. (406 mm) Position wall plate 15 at your desired height. Level, then mark the two hole locations. Drill two pilot holes using a 1/8 in. (3.2 mm) drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (63 mm). Install wall plate 15 with two washers 17 and screws 18 , using bit 16 . Adjust leveling, if needed, then securely tighten both screws 18 . CAUTION: Improper use could reduce the holding power of screws 18 . DO NOT over-tighten the screws. #10 x 2 1/2 in. Concrete Anchor Kit CMK3 (Magnetic Leveling Feet) 14 Attach Wall Plate to Wall 2-1A Spacers 14 x2 Standoff Inset Holes M6 x 35mm M8 x 16mm * 10 11 12 13 Too Long Cables 13 x2 18 x2 B 01 02 03 M6 x 20mm 17 x2 14 A Correct Too Short M5 x 35mm 12 x2 Washers • Rounded Back TV • Extra Space Needed [for cables or inset holes] M4 x 35mm M6 x 12mm ** B • Flat Back TV [AND TV closer to the wall] 04 05 06 07 08 09 11 x2 09 09 x2 A TV Screws M4 x 12mm 08 x2 Center TV bracket 01 on your TV's hole pattern and securely attach using hardware configuration A or B , depending on your TV needs. — Too short will not hold the TV — Too long will damage the TV 03 x2 02 x2 TV Screws 07 x2 M4 M5 Attach the TV Bracket CAUTION: Verify thread engagment of the screw or spacer/screw combination in STEP 1-2. Washers 06 x2 1-2 M8 TV Bracket 05 x2 1-1 Select Your TV Screws M6 Parts and Hardware for STEP 1 04 x2 Attach TV Bracket to TV 2-2B Verify Your Wall Attach the Wall Plate 2 1 Min. 8 in. (203 mm) 3 4 15 Min. 8 in. (203 mm) Min. 16 in. (406 mm) CAUTION: Avoid potential personal injuries and property damage! ● Minimum solid concrete thickness: 8 in. (203 mm). ● Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm). ● Minimum horizontal space between fasteners: 16 in. (406 mm). ● Mount wall plate 15 directly onto the concrete surface. 17 C1 15 Min. 16 in. (406 mm) Position wall plate 15 at your desired height. Level, then mark the two hole locations. * 16 Drill two pilot holes using a 5/16 in. (8 mm) masonry drill bit. Insert two anchors C1 (Fischer UX8x50R included in Concrete Anchor Kit CMK3 ). IMPORTANT: Pilot holes must be drilled to a depth of 2.75 in. (70 mm). Never drill into the mortar between blocks. CAUTION: Be sure the anchors are seated flush with the concrete surface. * 18 Install wall plate 15 with two washers 17 and screws 18 , using bit 16 . Securely tighten both screws 18 . CAUTION: Improper use could reduce the holding power of screws 18 . DO NOT over-tighten the screws.