Preview only show first 10 pages with watermark. For full document please download

3. Bass Control Knob Treb (treble Control) Knob 4. Scan Button

   EMBED

Share

Transcript

1 FEATURES OF YOUR HYUNDAI 84 H260B05O-AAT 1. POWER ON-OFF Control Knob The radio unit may be operated when the ignition key is in the "ACC" or "ON" position. Press the knob to switch the power on. The LCD shows the radio frequency in the radio mode or the CD track indicator in the CD mode. To switch the power off, press the knob again. 3. BASS Control Knob Press to pop the knob out and turn to the left or right for the desired bass tone. TREB (Treble Control) Knob Pull the bass control knob further out. Turn to the left or right for the desired treble tone. SEEK Operation (Automatic Channel Selection) Press the TUNE select button for 0.5 sec or more. Releasing it will automatically tune to the next available station with a beep sound. When the ( ) side is pressed longer than 0.5 second, releasing will automatically tune to the next higher frequency and when the ( ) side is pressed longer than 0.5 second, releasing will automatically tune to the next lower frequency. VOLUME Control 4. SCAN Button Rotate the knob clockwise to increase the volume and turn the knob counterclockwise to reduce the volume. When the scan button is pressed, the frequency will increase and the receivable stations will be tuned in one after another, receiving each station for 5 seconds. To stop scanning, press the scan button again. Pressing the FM/AM button changes the AM, FM1 and FM2 bands. The mode selected is displayed on LCD. 5. TUNE (Manual) Select Button 7. PRESET STATION SELECT Button Press the ( ) side or ( ) side to increase or to decrease the frequency. Press either button and hold down to continuously scroll. Release button once the desired station is reached. Six (6) stations for AM, FM1 and FM2 respectively can be preset in the electronic memory circuit on this unit. BALANCE Control Pull and turn the control knob clockwise to emphasize right speaker sound (left speaker sound will be attenuated). When the control knob is turned counterclockwise, left speaker sound will be emphasized (right speaker sound will be attenuated). 2. FAD (Fader Control) Knob Turn the control knob counterclockwise to emphasize front speaker sound (rear speaker sound will be attenuated). When the control knob is turned clockwise, rear speaker sound will be emphasized (front speaker sound will be attenuated). 6. BAND Selector