Transcript
English version
English version
NOTE Sweex card reader 8 in 1 USB 2.0 - Sweex card reader 9 in 1 USB 2.0
Advantages Ideal for mobile users Mutual exchange of data Direct Access
Install the software before connecting-up the hardware. This only applies for Windows 98SE and Windows 2000. You don’t have to install any software for Windows XP. Format the memory cards only from the camera, PDA, or device in which the card is used!
- Suitable for any desktop and notebook with a free USB port - Copy images and files and exchange them with a different media card - Direct access to the 4 extra drives that have been created, whereby the photos can for instance be copied directly to your hard disk
Software Installation for Windows 98SE and Windows 2000 Insert the installation CD-ROM in your CD-ROM drive. Double-click on the set-up 2.xxx folder. This folder contains the driver programmes.
Key Characteristics • • • • •
USB and ACPI compatible Supports USB Hi-Speed 480Mbps or Full-Speed at 12Mbps USB Truly Plug & Play automatic system configuration Windows 98SE, Windows 2000, Windows XP, MAC OS 9.X or higher Buspowered via the USB connection
Technical Specifications • • • • • • • • • • • • • • • • • • •
Interface Universal Serial Bus (USB) Revision 2.0 device Supports 8 - 256 MB Secure Digital (SD) Card Supports 8 - 128 MB Multi Media Card (MMC) Supports 4 - 1 GB Memory Stick (MS)/Supports MS-Pro Supports 4 - 512 MB Compact Flash (CFI) Card Supports 340 MB/512 MB IBM Microdrive (MD)Type II (CF+) Supports 4 - 256 MB Smart Media (SM) Card Supports 4 - 256 MB XD Card, only for 9 in 1 card reader
Double-click on the “ICSI_20_DRIVER” folder and select the Windows 98SE & 2000 folder.
Hot-Swapping 1x CF/MD socket 1x SD/MMC socket 1x MS socket (supports MS-PRO) 1x combined SM socket and XD socket, only for 9 in 1 card reader 1x USB cable (USB A type to mini B type) USB transfer speed: Hi-Speed 480 Mbps Data transfer speed read/write: 700K to 4000 KBytes/sec Power LED and Active Power LED DC + 5.0V direct from the USB cable EMI CE & FCC
Now double-click on the set-up file that is in this folder.
2
W W W. S W E E X . C O M
3
English version
English version
The driver has now been installed successfully, now restart the computer.
When you double-click on “My Computer” you will see four extra removable disks. These removable disks will enable you to access your memory card. As soon as you have placed a memory card in the reader, it is ready to be used.
4
W W W. S W E E X . C O M
5
English version
MAC 9.x Driver installation 1. 2. 3. 4. 5. 6.
Double-click on the “ICSI_20_DRIVER” folder and then select the MAC folder. Copy the “ICSIxx “ file to your desktop Double-click on the compressed “ICSIxx” file, you will then see the following file “Icsi.sit” Double-click on “Icsi.sit “, now “Driver Installer” appears Confirm the “Driver Installer” Follow the instructions and restart your computer After the restart you can connect the card reader and the card reader will be ready for use
MAC 10.1.2 or higher If your MAC OS is 10.1.2 or higher, it will not be necessary to install a driver. After you have connected the Card Reader, it will immediately be ready for use.
Hardware installation Power LED: This LED will light up when the Card Reader has been connected correctly. Active LED: This LED will flash when data are being transferred.
1. 2. 3. 4.
6
Compact Flash (CFI/CFII) and IBM Microdrive (MD) card reader/writer socket Smart Media (with optional XD socket) card reader/writer socket Memory Stick (MS/MS-PRO) card reader/writer socket Secure Digital (SD) and Multi Media Card (MMC) reader/writer socket
W W W. S W E E X . C O M
