Transcript
VS-30WQ06FNPbF Vishay Semiconductors
Schottky Rectifier, 3.5 A FEATURES
Base cathode 4, 2
• Popular D-PAK outline • Small foot print, surface mountable • Low forward voltage drop
1 Anode
D-PAK (TO-252AA)
• High frequency operation
3 Anode
• Guard ring for enhanced ruggedness and long term reliability • Compliant to RoHS Directive 2002/95/EC
PRODUCT SUMMARY Package
D-PAK (TO-252AA)
IF(AV)
3.5 A
VR
60 V
VF at IF
See Electrical table
IRM
30 mA at 125 °C
TJ max.
150 °C
Diode variation
Single die
EAS
6 mJ
• Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
DESCRIPTION The VS-30WQ06FNPbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection.
MAJOR RATINGS AND CHARACTERISTICS SYMBOL
VALUES
UNITS
Rectangular waveform
CHARACTERISTICS
3.5
A
60
V
IFSM
tp = 5 μs sine
490
A
VF
3 Apk, TJ = 125 °C
IF(AV) VRRM
TJ
0.53
V
- 40 to 150
°C
VOLTAGE RATINGS PARAMETER
SYMBOL
Maximum DC reverse voltage
VS-30WQ06FNPbF
UNITS
60
V
VR
Maximum working peak reverse voltage
VRWM
ABSOLUTE MAXIMUM RATINGS PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum average forward current See fig. 5
IF(AV)
Maximum peak one cycle non-repetitive surge current See fig. 7
IFSM
Non-repetitive avalanche energy
EAS
TJ = 25 °C, IAS = 1 A, L = 12 mH
6.0
mJ
IAR
Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical
1.0
A
Repetitive avalanche current
Document Number: 94199 Revision: 14-Jan-11
50 % duty cycle at TC = 133 °C, rectangular waveform 5 μs sine or 3 μs rect. pulse 10 ms sine or 6 ms rect. pulse
Following any rated load condition and with rated VRRM applied
For technical questions within your region, please contact one of the following:
[email protected],
[email protected],
[email protected]
3.5 490
A
70
www.vishay.com 1
VS-30WQ06FNPbF Schottky Rectifier, 3.5 A
Vishay Semiconductors
ELECTRICAL SPECIFICATIONS PARAMETER
SYMBOL
TEST CONDITIONS 3A
Maximum forward voltage drop See fig. 1
VFM (1)
TJ = 25 °C
6A 3A
TJ = 125 °C
6A Maximum reverse leakage current See fig. 2
IRM (1)
Threshold voltage
VF(TO)
TJ = 25 °C
VR = Rated VR
TJ = 125 °C TJ = TJ maximum
VALUES
UNITS
0.61 0.76
V
0.53 0.65 2
mA
30 0.38
V
34.31
m
Forward slope resistance
rt
Typical junction capacitance
CT
VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C
145
pF
Typical series inductance
LS
Measured lead to lead 5 mm from package body
5.0
nH
10 000
V/μs
VALUES
UNITS
- 40 to 150
°C
4.7
°C/W
0.3
g
0.01
oz.
Maximum voltage rate of change
dV/dt
Rated VR
Note (1) Pulse width < 300 μs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS PARAMETER
SYMBOL
Maximum junction and storage temperature range
TJ (1), TStg
Maximum thermal resistance, junction to case
RthJC
TEST CONDITIONS
DC operation See fig. 4
Approximate weight Marking device
Case style D-PAK (similar to TO-252AA)
30WQ06FN
Note (1)
dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA
www.vishay.com 2
For technical questions within your region, please contact one of the following:
[email protected],
[email protected],
[email protected]
Document Number: 94199 Revision: 14-Jan-11
VS-30WQ06FNPbF
100
Vishay Semiconductors
100
TJ = 150 °C TJ = 125 °C TJ = 25 °C
10
TJ = 150 °C
IR - Reverse Current (mA)
IF - Instantaneous Forward Current (A)
Schottky Rectifier, 3.5 A
10
TJ = 125 °C 1
TJ = 100 °C TJ = 75 °C
0.1
TJ = 50 °C
0.01
TJ = 25 °C 1
0.001
0
0.4
0.8
1.2
1.6
2
2.4
2.8
0
10
VFM - Forward Voltage Drop (V)
20
30
40
50
60
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage
CT - Junction Capacitance (pF)
1000
TJ = 25 °C 100
10
0
10
20
30
40
50
60
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
10
PDM t1
1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20
Single pulse (thermal resistance) 0.1 0.00001
0.0001
0.001
t2
Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC
0.01
0.1
1
t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 94199 Revision: 14-Jan-11
For technical questions within your region, please contact one of the following:
[email protected],
[email protected],
[email protected]
www.vishay.com 3
VS-30WQ06FNPbF Schottky Rectifier, 3.5 A
155
3.0
D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75
150 145
Average Power Loss (W)
Allowable Case Temperature (°C)
Vishay Semiconductors
DC
140 135 130
Square wave (D = 0.50) 80 % rated VR applied
125 120
2.5 2.0
RMS limit 1.5 1.0
DC
0.5
115 See note (1) 110
0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
1
0
2
3
4
5
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
1000
100
At any rated load condition and with rated VRRM applied following surge 10
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current
Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
www.vishay.com 4
For technical questions within your region, please contact one of the following:
[email protected],
[email protected],
[email protected]
Document Number: 94199 Revision: 14-Jan-11
VS-30WQ06FNPbF Schottky Rectifier, 3.5 A
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS-
30
W
Q
06
FN
1
2
3
4
5
6
1
-
Vishay Semiconductors product
2
-
Current rating (3.5 A)
3
-
TRL PbF 7
8
Package identifier: W = D-PAK
4
-
Schottky “Q” series
5
-
Voltage rating (06 = 60 V)
6
-
FN = TO-252AA (D-PAK)
7
-
None = Tube (50 pieces) TR = Tape and reel TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented)
8
-
PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95016
Part marking information
www.vishay.com/doc?95059
Packaging information
www.vishay.com/doc?95033
Document Number: 94199 Revision: 14-Jan-11
For technical questions within your region, please contact one of the following:
[email protected],
[email protected],
[email protected]
www.vishay.com 5
Outline Dimensions Vishay High Power Products
D-PAK (TO-252AA) DIMENSIONS in millimeters and inches (5)
A
E b3
Pad layout
C
A
(3)
0.010 M C A B
c2
A
L3 (3) Ø1
4
Ø2
4
B
Seating plane H
D (5) 1
2
0.245 MIN. (6.23)
D1
L4
3
3
(2) L5
2
b
1
A
c
b2
0.06 MIN. (1.524)
0.010 M C A B
2x e
0.093 (2.38) 0.085 (2.18)
(L1)
Detail “C” Rotated 90 °CW Scale: 20:1
H (7)
Lead tip C
Gauge plane L2
MILLIMETERS MIN.
0.488 (12.40) 0.409 (10.40)
0.089 MIN. (2.28)
Detail “C”
SYMBOL
0.265 MIN. (6.74)
E1
INCHES
MAX.
MIN.
MAX.
C Seating plane
C Ø
L
NOTES
A1
SYMBOL
MILLIMETERS MIN.
MAX.
MAX.
A
2.18
2.39
0.086
0.094
e
A1
-
0.13
-
0.005
H
9.40
10.41
0.370
0.410
b
0.64
0.89
0.025
0.035
L
1.40
1.78
0.055
0.070
b2
0.76
1.14
0.030
0.045
L1 3
2.29 BSC
INCHES MIN.
2.74 BSC
L2
0.51 BSC
NOTES
0.090 BSC
0.108 REF.
b3
4.95
5.46
0.195
0.215
c
0.46
0.61
0.018
0.024
L3
0.89
1.27
0.035
0.020 BSC 0.050
c2
0.46
0.89
0.018
0.035
L4
-
1.02
-
0.040
D
5.97
6.22
0.235
0.245
5
L5
1.14
1.52
0.045
0.060
D1
5.21
-
0.205
-
3
Ø
0°
10°
0°
10°
E
6.35
6.73
0.250
0.265
5
Ø1
0°
15°
0°
15°
E1
4.32
-
0.170
-
3
Ø2
25°
35°
25°
35°
3 2
Notes (1)
Dimensioning and tolerancing as per ASME Y14.5M-1994
(2)
Lead dimension uncontrolled in L5
(3)
Dimension D1, E1, L3 and b3 establish a minimum mounting surface for thermal pad
(4)
Section C - C dimension apply to the flat section of the lead between 0.13 and 0.25 mm (0.005 and 0.10") from the lead tip
(5)
Dimension D, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body
(6)
Dimension b1 and c1 applied to base metal only
(7)
Datum A and B to be determined at datum plane H
(8)
Outline conforms to JEDEC outline TO-252AA
Document Number: 95016 Revision: 04-Nov-08
For technical questions concerning discrete products, contact:
[email protected] For technical questions concerning module products, contact:
[email protected]
www.vishay.com 1
Legal Disclaimer Notice www.vishay.com
Vishay
Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
