Transcript
ORX 1V
Receiver Outlet Plate with HDBaseT 5Play Part No. 310005
Operating Manual
TRIAX - your ultimate connection
Operating Manual •
The illustrations in this operation manual are for explanation and guidance purposes only.
Dear Triax customer Thank you for purchasing the TRIAX ORX 1V Receiver Outlet Plate with HDBaseT 5Play. To ensure safety and many years of trouble-free operation, please read the Important Safety Precautions carefully before using this product.
Contents Safety Precautions
3
Front Panel View
Introduction
4
Specifications
Applications
4
D-Sub 9 Pin Definitions, Pin Layout 6
Package Contents
4
Connections and Installations
7
System Requirements
4
Acronyms
7
Features
4
2
5 6
Important Safety Precautions •
Cleaning - Unplug the AC power from the mains supply before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
•
Use a soft damp cloth to gently wipe the product when it is dirty. To protect the product, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the casing of the product.
•
Water and moisture - Do not expose the unit to wet or damp conditions.
•
Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock.
•
Ventilation - The vents and other openings in the casing are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.
•
Heat sources - Keep the product away from heat sources such as direct sunlight, radiators, heaters, stoves and other heat-generating products (including amplifiers).
•
To prevent fire, never place any type of candle or naked flames on the top or near the product.
•
Servicing - Do not attempt to service the product yourself. Removing covers can expose you to electric shock and other dangerous conditions. Maintenance should be performed by the manufacturer or by a suitably qualified person.
3
Introduction The ORX 1V allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6 cable. This solution has the added features of RS-232, 2-way IR control functionality and bi-directional internet over the same CAT5e/6 cable. These combined HDMI and control signals can be transmitted up to lengths of 100m on Cat6 cable.
Applications • • • • • •
Household entertainment sharing and control Lecture room display and control Showroom display and control Meeting room presentation and control Classroom display and control Used in conjunction with HDA 1x2S + HDA 1x8S
Package Contents
ORX 1V Receiver
• Receiver • IR Digital Link Receiver • Operating Manual
System Requirements •
Output display with HDMI input socket.
Features • • • • •
HDMI 1.4 with 3D, 4k x 2k support, HDCP & DVI Compliant Supports HDCP repeater and CEC function Simultaneously uncompressed data sending over a single 100m/328ft withCAT6 cable or 80m/262ft with CAT5e cable Uncompressed video 1080p, 60Hz, 48bits Audio support up to LCPM 7.1CH & Dolby TrueHD, DTS-HD 5PlayTM convergence: HDMI, LAN, POE & Control (IR & RS232) Bi-directional Internet Installation Friendly
4
Front View
8
1 2
7 6
3
4
5
1. IR Digital Eye: These 3.5mm Jack Sockets are to connect with the IR Digital Eye included in the package to receive the IR signals. 2. IR Emitter:
This Jack Socket connects the IR Emitter to the Receiver.
3. RS-232 In/Out: This socket connects with D-Sub 9pin Null-Modem cable from PC/NB for RS-232 control and signal sending to the control device.
4. LAN:
To enable smart TV’s to access internet content (eg BBC iPlayer)
5. HDMI Out:
Connect “HDMI out” on the Receiver to the sink device i.e. TV
6. Power LED:
This blue LED will illuminate when the device is attached with power supply.
7. Link LED:
The yellow LED will illuminate when the transmitter and receiver have detected and communicated between Source and Sink devices.
8. CAT5e/6 Out/In: The RJ45 socket is to be connected with a single CAT5e/6 cable for data transmission. (on the rear of the ORX 1V)
5
Specifications Transmitter Inputs
1 x HDMI, 1 x IR Extender, 1 x IR Blaster, 1 x RS-232, 1 x LAN
Output
1 x CAT5e/6
Receiver Inputs
1 x CAT5e/6, 1 x IR Extender, 1 x IR Blaster, 1 x LAN
Outputs
1 x HDMI, 1 x RS-232
General ESD Protection
Human Body Model: ± 8kV (air-gap discharge), ± 4kV (contact discharge)
IR Frequency
20~60 Hz
Dimensions (mm)
102(W) x 115(D) x 25(H)
Weight (g)
252 (TX), 256 (RX)
Chassis
PC White
Silkscreen Printing
Black
Power Consumption (W)
TX: 6, RX 8
Operating Temperature
0°C ~ 40°C/ 32° ~104°
Storage Temperature
-20°C ~ 60°C/ -4° ~140°
Relative Humidity
20~90% RH (non-condensing)
D-Sub 9 Pin Definitions, Null-Modem Pin Layout Pin
Define TX / RX
1
N/C
3
RXD / TXD
2 4 5 6 7 8 9
TXD / RXD N/C
GND N/C N/C N/C N/C 6
Connections and Installation
IR Digital Eye
IR Digital Eye
HTX 1V
ORX 1V
Acronyms Acronym
Complete Term
CAT5e
Category 5 Cable
CAT6
Category 6 Cable
CEC
Consumer Electronics Control
DVI
Digital Visual Interface
HDCP
High-Bandwidth Digital Content Protection
HDMI
High Definition Multimedia Interface
IR
Infrared
7
Issue 2
*Triax reserves the right to change the specifications without prior notification
