Transcript
MODEL 3150/38 W16 MODEL 3200/50 W16 WIDECROWN STAPLERS
®
P
®
®
TOOL SCHEMATIC AND PARTS IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manuals #403606, #405218 and #405222 for detailed information on this tool. It is the customer's responsibility to have all operators and service personnel read and understand this information.
PARTS LEGEND 1 2 3 4 6 7 *8 *9 10 11 *12 *13 14 15 *16 17 18 *19 *20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 37 38 *39 40 41 *42 ▲ 43 44 45 46 47
091362 002187 404242 006310 402704 402717 404230 091537 404122 404055 404256 402723 403563 403582 404182 402725 405245 402728 402729 403854 403855 402754 402707 402701 404939 500685 500687 402708 402706 091545 405144 402079 402668 405147 005849 026133 401958 092174 097746 097748 091591 401940 091622 004502 092037 402781 402741
4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 4 1 1 2 1 1 2 1 1 1 1 1 1 1 4 5 1 1
3150/38 W16, 402750 3200/50 W16, 402775
Socket Head Capscrew, 1/4 - 20 x 1-1/2" Lock Washer, 1/4" Diffuser Cap Socket Head Capscrew, #6 - 32 x 1/2" Cap Conical Spring Retaining Ring "O" Ring, Main Valve Assembly Upper Valve Piston Post, Main Valve "O" Ring, Main Valve Post "O" Ring, Piston Piston Jam Nut Driver Blade Seal, Sleeve Sleeve "O" Ring, Sleeve "O" Ring, Sleeve Retainer, Bumper Bumper Seal, Driver Blade Gasket, Cap Housing Logo, Housing Nameplate (3150/38) Nameplate (3200/50) Gasket, Flange Flange Socket Head Capscrew, 1/4 - 20 x 7/8" Trigger Pin, Trigger Retaining Washer Lever, Trigger Roll Pin Roll Pin, 1/8" Dia. x 1" Lg. Valve Body "O" Ring, Valve Body Valve Pin Spring, Valve Pin "O" Ring, End Plug End Plug Reducing Pipe Bushing Socket Head Capscrew, #10 - 32 x 5/8" Lock Nut, #10 - 32 Rail Bracket (3200/50) Rail Bracket (3150/38)
▲ 48 49 50 51 *52 53 54 55 *56 57 58 59 60 61 62 63 64 65 **66 67 68 69 70 71 72 ▲ 73 *74 75 76 77 78 79 80 *81 *82 *83 84 85 86 87
004224 403716 402629 402737 402738 402736 402608 402763 402734 501210 501212 404054 404698 501204 501206 402730 501209 405078 405079 501207 501208 402486 500459 402748 402780 404848 404849 402731 402740 402758 402759 091568 091532 091534 402743 402760 404325 091447 404243 090927 092775 092773 404056 405243 091966 500488
4 2 2 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 1 1 1 1 1 1 1
Socket Head Capscrew, #10 - 32 x 3/8" Socket Head Capscrew 10-32 x 5/16" Hardened Washer Intermediate Work Contacting Element Spring Flat Washer, #10 Work Contacting Element Upper Work Contacting Element Spring Front Guide (3150/38) Front Guide (3200/50) Seal, Main Valve Roll Pin Assembly Back Plate (3150/38) Back Plate (3200/50) Pivot Pin, Front Guide Latch Pin Spring, Front Guide Latch (3150/38) Spring, Front Guide Latch (3200/50) Latch, Front Guide (3150/38) Latch, Front Guide (3200/50) Retaining Washer Warning Sign Pivoting Rail Cover Assembly (3150/38) Pivoting Rail Cover Assembly (3200/50) Rail and Rail Cover Assembly (3150/38) Rail and Rail Cover Assembly (3200/50) Logo, Rail Roll Pin, 3/32" Dia. x 7/16 Lg. Latch, Follower Spring, Follower Latch Binding Head Screw, #6 - 32 x 1/4" Negator Drum, Negator Pin, Negator Drum Follower Stop Nut, #8-32 Flat Washer Spacer, Diffuser "O" Ring "O" Ring "O" Ring Lower Valve Piston Flange,Sleeve O-Ring Grip Handle
AIR CONSUMPTION CHART
Denotes normal wear items.
**
Make sure warning label (500459) is properly affixed. Replace if necessary. Label available at no charge through the Service Dept.
▲
Apply Loctite 242 (Blue) Part No. 093500
➔
Denotes new change.
.050
AIR CONSUMPTION - SCFM/FASTENER
*
.045
.040 .040
.035
.030
70
80 90 100 110 AIR PRESSURE - PSIG
120
3150/38 W16 402750
3200/50 W16
24
402775
87 78
Cap Assembly #402709
Main Valve Assembly #404188 Trigger Assembly #402408
45
49 Piston Assembly #404345 33 62 49
86
85
WARNING All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool's operation and present a safety hazard
ACCESSORIES Sequential Operating Kit This special attachment is designed for sequential operation (stops "contact" firing). The operator must depress and hold the work contacting element against the worksurface before pulling the trigger. This sequence must be repeated each timethe tool drives a fastener.
Part No. 406006
Remote Fire Valve This valve via a positive air signal allows a machine mounted tool to be operated from an automatic air valve or foot pedal system.
Part No. 1X0713
Adjustable Foam Contacting Element This is a wide-foot, cast and brazed assembly that replaces the standard 3000-W16 series work contacting element. This assembly is intended for foam sheathing applications and on machine-mounted tools. Note: Must be used in combination with #402763 Upper WCE Part No. 402997
(☞ This item is standard on the 3150/38 W16BF only.) Large Nylon Tool Bag
Part No. 219046
Safety Glasses Clear
Part No. 402510
Tinted
Part No. 402512
Belt Hook Attaches to cap of tool enabling you to carry tool on belt holder. Part No. 219017 Belt Hook Holder Attaches to work belt and carries tool using the above belt hook. Part No. 219028 Wide Crown Stapler Repair Kit This kit repairs all air leaks except for the trigger valve. Part No. 219220 Trigger Valve Repair Kit This kit repairs all trigger valve air leaks. Part No. 219224 Lubricants and Loctite Chemplex 710 Lubricant 1 lb. Chemplex 710 Lubricant 5 gram tubes Loctite 242 (Blue) 1 oz. Lubricating Oil 16 oz. Lubricating Oil 8 oz. with Antifreeze
Part No. 403734 Part No. 219188 Part No. 093500 Part No. 403720 Part No. 219090
Degreaser Cleaner Ideal cleaner for all Paslode tools.
Part No. 219086
SAFETY INSTRUCTIONS
DO NOT EXCEED MAXIMUM RECOMMENDED AIR PRESSURE
WEAR EYE AND HEARING PROTECTION
60
0
120
Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool.
120
0
60
Operate the tool using only the recommended air pressure. Do not exceed the maximum air pressure marked on the tool. Be sure the air pressure gauge is operating properly and check it at least twice a day.
Never use any bottled air or gases such as oxygen to operate the tool since they could cause the tool to explode.
Printed in U.S.A. © 2002, Illinois Tool Works, Inc.
P
An Illinois Tool Works Company 888 Forest Edge Drive Vernon Hills, Illinois 60061
403620-15 7/02
