Transcript
3,5 F 1 CS 8Ω 3,5” | 90 W
Professional Code Z000960
1” voice coil Kapton former WpT
Waterproof Cone Treatment Ferrite Magnet Circuit 88.5 dB sensitivity Frequency Range 110-12000 Hz
+110
500
+105 200 +100
100
+95
d +90 B
50
+85
Ω
S P L +80
20
+75 10 +70
General Specifications
5 +65
Nominal Diameter
88 mm (3,5")
3 +60 20
50
100
200
500
1k
2k
5k
10k
20k
Hz
Nominal Impedance
8Ω
Rated Power AES (1)
45 W
Continuous Program Power (2) Sensitivity @ 1W/1m
Frequency Response on 5.5 Lt @ 110 Hz Vented Box @ 1W, 1m Free Air Impedance
90 W
(3)
88.5 dB
Voice Coil Diameter
25 mm (1")
Voice Coil Winding Depth
Constructive Characteristics
6 mm
Magnet
Magnetic Gap Depth
4 mm
Basket Material
Flux Density
1.04 T
Voice Coil Winding Material
Copper
Magnet Weight
160 g
Voice Coil Former Material
Kapton
Net Weight
0.4 kg
Cone Material
Thiele & Small Parameters (4) Re
5.0 Ω
Cone Treatment Fs
107.0 Hz
6.52
Qes
0.63
Dust Dome Material
Qts
0.57
Mms
3.3 g
Mounting Information
Vas X max(5) η0
670 µm/N 1.4 l +/-1.5 mm 0.26 %
Bxl
4.20 Tm
Sd
2
X var (6) Le (1kHz)
38.5 cm
+/-3.1 mm 0.21 mH
Nylon Fiberglass Doped
Paper Surface Waterproof Treatment
Surround Material
Qms
Cms
Ferrite
Rubber Treated Cloth
Overall Dimensions
88 mm
Baffle Cutout Diameter Mounting Holes
81 mm 4 holes ø4 on ø98 mm
Total Depth
44.7 mm
(1) Rated Power measured with 2-hour test with pink noise signal, 6dB crest factor, loudspeaker in free air, power calculated on rated Zmin. (2) Power on Continuous Program is defined as 3dB greater than the Rated Power. (3) Calculated by Thiele & Small parameters, for SPL average in box refer to frequency response. (4) Thiele & Small parameters measured with laser system after preconditioning test. (5) Measured with respect to a THD of 10%. (6) Value corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value. (7) Drawing dimensions: mm.
SICA Altoparlanti s.r.l. - ITALY – website: www.sica.it ; www.sicaspeakers.com - E-mail:
[email protected] - Tel. +39-071-7958072 - Fax +39-071-7959006
14/03/2017
