Transcript
SCAN TO
SEE ME IN ACTION
W W W. S T E A LT H V R . N E T
3 6 0 º AC T I O N C A M E R A Q U I C K S TA RT G U I D E
STEALTHVR
@STEALTH_VR
STEALTH_VR
STEALTH VR
A S I M P L E H OW TO 360° ACTION CAMERA
Before you start to film or photograph that memorable moment, follow the 2 steps below so your all set for action. SCAN ME
1: Download the XDV360 App. Use a QR Scanner App and scan the relevant QR Code, or you can search XDV360 in The App Store & Google Play.
SHOOT & VIEW - RECORD
SCAN ME
2: Insert a Micro SD Card - you will hear a clicking noise to indicate its inserted correctly. (Memory Card Not included)
You can film and record in 2 different ways. You can either record straight to the memory card and relive your footage later, or, you can record your footage and watch in Live Mode.
1: RECORD & RELIVE 1: Press & hold the ‘Power/Mode’ button. OK
MODE
2: You can choose to record in 2 modes. You can either do a Video Record, or if your filming involves fast paced activities, its best to film using the Time-Lapse mode. To do this, continuously press the ‘Power/Mode’ button until you reach your required mode. The mode icon appears in the top left of the screen.
2GB 2448 30FPS
Time-Lapse Mode
3: To start recording press the ‘OK’ button on the camera, or if your using the Remote Control press & hold the grey button for 4 seconds. You will see on the camera screen, the timing appear as per the image -bottom right. 4: To stop recording, press ‘OK’ on the camera or the grey button on the Remote Control. The timing will disappear off the screen to indicate recording has finished. Your recording will save to the memory card. 5: To relive footage, you need to connect the camera to your device using the XDV360 app and select Media Gallery. All content will be saved within that folder. Connection to the XDV360 app is explained below.
Video Record Mode
• 02:30:00 2GB 2448 30FPS
Remote Control
2: RECORD & VIEW IN LIVE MODE To record footage and view it in Live Mode, you need to make a wireless connection between your chosen device and the camera. (Please note: NO internet is required to make the connection) 1: If not already powered up, press & hold the ‘Power/Mode’ button.
5: Your now ready to Record, View, and Edit through the app with its on-screen controls. Choose from the eight viewing modes to easily turn your video into a mind-bending masterpeice.
2: To make the wireless connection, first press & hold the ‘Up’ button until the ‘Wireless Symbol’ appears on screen. 3: Go to your WiFi settings on your phone & select ‘STEALTH VR’. When prompted, key in the password: 12345678 and connect.
Round
4: launch the XDV360 app on your device. You will see the message ‘Waiting to connect STEALTHVR’ on your screen. Once connected, the XDV360 app menu will appear as per the image to the right.
Dual View
Panoramic
Inner Dome
Ring
Square
VR Mode
Dome
(By selecting ‘VR Mode’ on the XDV360 app you can watch and record footage using your VR100 headset)
SHOOT & VIEW - PHOTO
2GB
To shoot photos you need to make sure that the Photo Shooting Mode is selected on the camera. You can shoot photos in 3 different ways... 1: On the camera, press the ‘Power/Mode’ button continuously until the Photo Shooting Mode icon appears. Press ‘OK’ to take a picture. 2: Press & hold the red button on the Remote Control. 3: Select Photo Shooting Mode icon in the XDV360 app.
2448 30FPS
Photo Shooting Mode
Note: You can Shoot, View & Edit photos in Live Mode and also relive through the Media Gallery. (Wireless connection to XDV360 app needed)
