Transcript
®
365B L FS
Series II Front Shovel
Operating Weight – 4.0 m3 bucket, 650 mm shoes Cat® 3196 ATAAC Diesel Engine Net Power Rated Speed Maximum Travel Speed
73 340 kg 301 kW/404 hp 2000 rpm 4.1 km/h
365B L FS Series II Front Shovel State of the art technology, high performance, rugged durability combine to maximize your productivity. Electronic Control System with VIDS (Vital Information Display System) and Advanced Diesel Engine Management (ADEM) II Convenient and user friendly, language capable machine interface makes operating and servicing your machine simple yet sophisticated.
All-day Operator Comfort Roomy, quiet, automatic climate controlled cab helps keep operator fatigue low and assures high productivity throughout the work day.
Structures Caterpillar design and manufacturing techniques help assure outstanding durability and service life from these important components.
Engine The Cat 3196 ATAAC engine delivers efficient power, proven reliability, outstanding fuel economy and low emissions.
Hydraulics Smooth precise controls, fast cylinder speeds for quick cycle times. Selectable electro-hydraulic controls deliver power and smooth controllability.
Undercarriage Caterpillar designed excavator undercarriage is stable, durable and low maintenance.
Maximum uptime: Service and Maintenance Extended service intervals to 500 hours and easy access can reduce scheduled downtime and owning and operating costs.
Environmentally Responsible Design Quieter operation, lower engine emissions, less fluid disposal and cleaner service can help you meet or exceed worldwide regulations and protect the environment.
Complete Customer Support Your Cat dealer offers a wide range of services that can be set up under a customer support agreement when you purchase your equipment. The dealer will help you choose a plan that can cover everything from machine and attachment selection to replacement.
Outstanding performance. High level of sustained production, improved reliability and durability increase your productivity and lower your operating costs.
2
Front Linkage The 365B L FS Series II delivers higher production and efficiency to all jobs. Parallelogram Linkage. The Cat 365B L FS Series II features parallelogram-type front linkage with a master cylinder. The parallelogram linkage automatically keeps the bucket parallel to the ground. This allows excellent penetration, fast loading and a smooth floor clean-up. The operator can concentrate on the boom and stick rather than bucket adjustments. The master cylinder circuit automatically maintains a level bucket while raising the boom. It aids in bucket positioning both above and below grade, eliminating constant adjustment during the work cycle. The master cylinder arrangement also uses bucket cylinder circuit pressure to increase the boom lifting force. Boom. The boom is 4600 mm long and features a rigid structure with a number of steel castings. The cast steel portions are structured into a box to reduce the weight of the boom nose and boom foot.
Stick. The Cat 365B L FS Series II offers a 3480 mm long stick. The stick nose and stick foot are made of cast steel. The middle portion has a box structure fabricated with steel plates. The stick cylinder mounting bracket is reinforced from the inside.
Bottom Dump Bucket. The recommended bucket for the 365B L FS Series II is a bottom dump bucket. It is designed for strength, performance and long service life. Linkage Pin. All pins used in the 365B L FS Series II front linkage have thick chrome plating, giving them high wear and corrosion resistance. The diameter of each pin is made as large as possible to smoothly distribute the shear and bending loads associated with the digging and lifting forces.
3
Engine
Brakes
Caterpillar 3196 turbocharged and air-to-air aftercooled diesel engine.
Meets the standard ISO 10265:1998
Power rating conditions ■ net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator ■ no engine derating needed up to 2300 m elevation ■ meets Stage II EU emission Directive 97/68/EC
Service and parking brake features ■ wet, multiple-disc brakes are used on the final drive input shafts ■ spring-applied, hydraulically released ■ actuating a travel control simultaneously releases the brakes ■ when the controls are released, the brakes automatically apply
Hydraulic System
Track
Steering
Two variable displacement, axial-piston pumps power the boom, stick, bucket, auxiliary and travel circuits. A third variable displacement pump powers the swing circuit. One single-section, geartype pump powers the pilot circuit and one variable flow pump powers the cooling fan.
Caterpillar designed and built track-type long undercarriage. Heavy duty shoes are 20.9 mm thick.
Two electronic rocker pedals with detachable hand levers control steering and travel functions.
Track width (double grouser) standard 650 mm optional 750 mm Ground clearance 835 mm Number of shoes each side 47 Number of rollers each side 8 Number of carrier rollers each side 3
Controls ■ controls are electronic for reduced efforts and precise movement ■ left pedal and lever control left track; right pedal and lever control right track ■ optional straight travel pedal drives both tracks forward or reverse at the same speed; steering adjustments can be made by modulating right or left pedal
Drive
Swing Mechanism
Drive system is fully hydrostatic.
Hydrostatic with independent planetary reduction.
Ratings at 2000 rpm Net power ISO 9249 EEC 80/1269
kW
hp
301 301
404 404
Dimensions Bore Stroke Displacement
130 mm 150 mm 12 liters
Main Implement System Maximum flow Equipment pumps 2 x 400 liters/min Swing pump 360 liters/min Maximum pressure Main 32 000 kPa Travel 35 000 kPa Swing 28 050 kPa Pilot System Maximum flow Maximum pressure
91 liters/min 4120 kPa
Cylinders, Bore and Stroke Boom (2) 160 x 1575 mm Stick (1) 200 x 1870 mm Master (1) 152 x 1953 mm Bucket (2) 178 x 1810 mm
Ratings Maximum drawbar pull Maximum travel speed
462 kN 4.1 km/h
Ratings Swing torque Swing speed
204.8 kNm 6.5 rpm
Features ■ the swing mechanism is driven by two drives with pinion gears sealed in a grease bath through a doublereduction planetary gear set
4
365B L FS Series II specifications
Hydraulic Controls
Cab/FOGS
Two joystick hand levers actuate boom, stick, bucket and swing.
■ ■
Boom/Bucket Controls (Right Joystick) ■ move forward and backward to lower and raise boom ■ move left and right to control bucket curl and dump ■ button on top is one-touch low idle Stick/Swing Controls (Left Joystick) ■ move forward and backward to move stick out and in ■ move left and right to control direction of swing ■ button on top controls horn Other Features ■ oblique movement of either lever operates two functions simultaneously ■ manually applied lever on left console deactivates electronic joysticks, travel controls and electrical power for engine starting circuit ■ control pattern can be changed through VIDS to suit operator preferences.
Sound
Cab/FOGS meets ISO10262:1998. Standard air conditioning system contains environmentally friendly R134a refrigerant.
Service Refill Capacities Liters
Fuel Tank Cooling System Engine Oil Swing Drive (each) Final Drive (each) Hydraulic system (including tank) Hydraulic tank
800 95 54 12 15 670 310
Machine and Major Component Weights
Operator Sound ■ The operator sound level measured according to the procedures specified in ISO 6394:1998 is 73 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. ■ Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in noisy environment. Exterior Sound ■ The labeled spectator sound power level measured according to the test procedures and conditions specified in 2000/14/EC is 110 dB(A).
Bucket Specifications
Actual weights and ground pressures will depend on final machine configuration. Boom length Stick length Operating weight* Bucket capacity Ground pressure Stick weight (without cylinder) Boom weight (without cylinder) Upperstructure (without counterweight) Undercarriage Counterweight * With counterweight, operator and full fuel.
4600 mm 3480 mm 73 340 kg 4.0 m3 1.09 kg/cm2 2810 kg 4460 kg 16 540 kg 26 680 kg 9800 kg
Rock Capacity 4.0 m3 Width 2245 mm Tip Radius 2575 mm Weight (without tips) 6500 kg Maximum Recommended Material Density* 1800 kg/m3 Stepped type edge Maximum throat opening 1370 mm Cutting edge thickness 70 mm Adapter family J600 (QTY 6) * Assumptions for maximum material density rating: 1. Front linkage fully extended at ground line 2. Bucket level 3. 100% bucket fill factor
365B L FS Series II specifications
5
Dimensions All dimensions are approximate.
D
E
A B F J C
H G mm
Boom Stick A Overall Height Boom Top Height Cab Top Height With FOGS Without FOGS B Body Height*
mm
C Overall Width (undercarriage retracted) 650 mm Shoe 750 mm Shoe C Overall Width (undercarriage extended) 650 mm Shoe 750 mm Shoe D Upperstructure Width* E Tail Swing Radius F Minimum Ground Clearance
4600 3480 4310 4530 4340 3250
* without mirrors and handrails
3400 3500
3900 4000 3420 4000 840
mm
G Overall Length Counterweight Removed Bucket and Stick Removed Boom, Bucket and Stick Removed H Track Length J Track Gauge Width Extended Position Retracted Position
13 170 12 400 8020 6210 5850 3250 2750
Working Ranges Stick Length Boom Length Bucket Capacity A Maximum Reach B Maximum Reach at Ground Level C Maximum Level Crowd Distance D Maximum Digging Depth E Maximum Digging Height F Maximum Dump Height G Reach at Maximum Dump Height Bucket Breakout Force* (SAE) Stick Breakout Force* (SAE)
m 11 10 9 8 7
G
6 E 5
F
4 3 2
* Forces shown are for 4.0 m3 rock bucket
1 0 C B A
1 D 2 10
6
9
8
7
6
5
4
3
2
1
0
365B L FS Series II specifications
3480 mm 4600 mm 4.0 m3 9470 mm 9120 mm 3800 mm 2480 mm 10 960 mm 7080 mm 6260 mm 519 kN 370 kN
Standard Equipment Standard equipment may vary. Consult your Caterpillar dealer for specifics. Electrical
Alternator, 70-amp Light integral with swing frame (one) storage box (one) cab mounted (two) cab interior (one) Signal / warning horn Guards Guard, heavy duty bottom – including swivel guard and travel motor guard FOGS (Falling Object Guarding System), including cab working lights Operator Station 700 mm cab riser Windows, fixed one-piece high impact resistant front windshield, all other windows to be tempered glass, green tinted, sliding upper door window Neutral lever (lockout) for all controls Windshield wiper and washer, upper and lower Positive filtered ventilation Pressurized cab Automatic climate control with air conditioner, heater and defroster Instrument panel with gauges (Vital Information Display System – VIDS) Seat, KAB 524 (high back with head rest), suspension, four way adjustable (up-down, front-rear), adjustable arm rests Seat belt, retractable (76 mm width) Joysticks, seat mounted multifunction, wrist lever (electric signal)
Start-up level check for hydraulic oil, engine oil, and engine coolant Travel control pedals with removable hand levers Beverage / cup holder Pre-wired radio mounting (DIN) with mounting for two speakers, antenna Storage compartment suitable for a lunch box Ashtray with lighter (24 volt) Power supply, 12 volt 7 amp with socket Coat hook Floor mat Literature compartment behind seat Skylight, polycarbonate fixed Sun shade for skylight Sun visor EC Mark package including steps, mirror and other EC required features EC sound package 110 dB(A), exterior sound power per 95/27/EC Engine/Power Train Cat 3196 ATAAC 2300 m altitude capability diesel engine, low emission/low noise version Stage II emission compliant Automatic engine speed control Cooling package, with high ambient capability Water separator in fuel line Radial seal air filter with double element Air precleaner (Donaclone) Two-speed travel with automatic shift change Cold weather starting package Automatic swing parking brake Automatic travel parking brakes
Undercarriage 650 mm clipped double grouser shoes Hydraulic track adjusters Track-type sealed undercarriage Idler and center section track guiding guards Other Standard Equipment Door locks and cap locks with Caterpillar one-key security system Catwalks Counterweight (9800 kg) fabricated Cat branded XT hoses and reusable couplings Cat batteries S·O·SSM quick sampling valves for engine and hydraulic oil Drive for auxiliary pump Firewall between pump compartment and engine Provision for Product Link (PL201) includes power source and mounting location Provision for Auto-lube includes power source and mounting location Boom drift reducing valve Stick drift reducing valve Return filter clogging alarm Towing eyes on base frame (front and rear) Mirrors, rearview, frame (right) and cab (left) Hydraulic oil filters: Capsule type main filters Case drain filters for travel and swing motors Pilot filter Antifreeze protection to -29°C
Optional Equipment Optional equipment may vary. Consult your Caterpillar dealer for specifics. Track Heavy duty track shoes: 650 mm double-grouser, 20.5 mm cross section (including EC steps) 750 mm double-grouser, 20.5 mm cross section (including EC steps) Guards Track guiding guard, two piece additional without center guard
Miscellaneous Options 3rd pedal, straight travel (right hand side) electric Starting kit, cold weather, HD battery and ether (-32°C) Electric refueling pump with automatic shutoff Bio oil factory fill (Caterpillar HEES), includes fine filtration for water and particle content, 5000 hours change interval
Fine filtration of hydraulic oil Pump suction line shutoff valve Seat KAB 524 with seat heater Air suspension seat Rain protection for windshield, high impact and scratch resistant Travel alarm with cut-off switch Pump discharge screens
7
365B L FS Series II
HEHH2877 (07/2003) hr
Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Caterpillar dealer for available options.
www.CAT.com © 2003 Caterpillar
®
