Preview only show first 10 pages with watermark. For full document please download

3700el/8700el/8800el Rim Exit Devices Electric Latch Retraction Installation Instructions

   EMBED

Share

Transcript

PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES CONTROL SWITCH (N.O.) (EX. PUSHBUTTON) (KEYPAD) (CARD READER) X -- DENOTES FIELD WIRE SPLICE DRY CONTACTS ! 4605/4606 24 VAC 40 VA TRANSFORMER (12 VAC BY OTHERS) RED HINGE EDGE OF DOOR 4603 2 AMP RECTIFIER 120 VAC LINE VOLTAGE 4612 WIRE TRANSFER X WHITE (+) RED EL ELECTRIFIED EXIT DEVICE X D1 24 VDC BLACK (-) NOT SUPPLIED MAY USE 1N4004 TO PREVENT ARCING IN SWITCH.75000000 X X REFER TO EXIT DEVICE TEMPLATE FOR BAR HEIGHT BLUE (N.O.) BLUE 12 VDC YELLOW YELLOW MONITOR SWITCH A SINGLE POLE SINGLE THROW MONITOR SWITCH IS ADDED TO THE SOLENOID. INDICATE WHEN THE UNIT IS ELECTRICALLY UNLATCHED. SWITCH OUTPUTS CAN BE USED TO SIGNAL AUTOMATIC DOOR OPERATORS, MONITOR PANELS, FIRE CONTROL PANELS ETC. 24 VDC BLACK BLACK FIG. 1 ELECTRIC LATCH RETRACTION WIRING SCHEMATIC DOOR PREPARATION FIG. 2 .375 FOR WIRING ACCESS TO LOCATED AND PREPPED AT INSTALLATION CL REFER TO EXIT DEVICE TEMPLATE FOR BAR HEIGHT EXIT DEVICE MOUNTING HOLES (REFER TO EXIT DEVICE TEMPLATE) www.adamsrite.com Phone: 800-626-7590 800-872-3267 Fax: 866-582-4641 800-232-7329 3700EL/8700EL/8800EL RIM EXIT DEVICES 80-0180-268 Rev. J ECN: 11955C WIRE SIZING FIG. 3 ELECTRIC LATCH RETRACTION INSTALLATION INSTRUCTIONS Date: 07-18-12 CL Page 1 of 2 Appvd: MP PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES 3 2 4 6 5 1 3 www.adamsrite.com Phone: 800-626-7590 800-872-3267 Fax: 866-582-4641 800-232-7329 3700EL/8700EL/8800EL RIM EXIT DEVICES 80-0180-268 Rev. J ECN: 11955C Date: 07-18-12 ELECTRIC LATCH RETRACTION INSTALLATION INSTRUCTIONS Page 2 of 2 Appvd: MP