Preview only show first 10 pages with watermark. For full document please download

38.diffuser Fitting Surface Mounted

   EMBED

Share

Transcript

Indoor │ General Lighting │ Surface Mounted │ Diffused Fitting Designed for direct mounting to ceiling. Diffuser designed on attached to fitting. Provided even light distribution and glare control. Mainly used for offices, supermarkets and complexes. H L W SAC 240 / S TM5 Utilization Factors Utilization factors Room reflection C W 0.7 0.5 0.3 0.1 0.5 0.5 0.3 0.1 0.3 0.5 0.3 0.1 0.0 0.0 LOR =57.8% F 0.2 0.2 0.2 0.0 DLOR =57.8% ULOR =0.0% Room index 4 3 2.5 2 1.25 1.5 0.75 1 58 55 53 50 46 43 38 32 55 52 50 46 41 38 34 28 53 49 47 43 38 35 30 24 55 53 51 48 44 41 37 31 53 50 48 45 41 37 33 27 51 48 46 42 38 34 30 24 53 51 49 46 43 40 36 31 52 49 47 44 40 37 32 27 50 47 45 42 37 34 30 24 47 45 42 40 35 32 28 23 SHR NOM =1.25 SHR MAX =1.45 SHR MAX TR =1.61 Intensity [cd/1000lm] 105° 5 59 57 55 57 55 54 55 53 52 49 120° 150°165°135° 120° 90° 105° 90° 0 25 75° 75° 50 75 100 60° 60° 125 150 175 200 45° 45° 225 30° 15° 15° 30° Gamma[ ° ] C180 C270 C0 C90 Photometry result or data are available for interior lux calculation upon requisition. Photometry constructed by own Goniophotometer accurately measure the intensity distribution LOR, photometric factors and lumen per watt of light fittings. Technical Data Body Diffuser Paintwork Light Source Electrical Data Wire Ballast Condenser Starter Lampholder/ Starterholder Optional/ Components Made of heavy gauge sheet steel. Wide choice of diffuser type for selection. Fully coated with a high gloss white epoxy polyester powder, giving resilient finish. Fluorescent TLD lamp of 18W, 36W. 240V, 50Hz, Power factor 0.9. HR 105° C. Polyester Vacuum Impregnated. Metallised Polypropylene Film. SERIES(4W-22W), SINGLE(4W-80W). Moulded from Polycarbonate Material. Fused terminal block/Electronic ballast/Emergency pack. Dimensions MODEL NO. NO. OF LAMP L(MM) L1(MM) W(MM) SAC 120 / S (1x2) 1x18W 612 - 302 SAC 220 / S 2x18W 612 - 605 SAC 320 / S 3x18W 612 - 605 SAC 420 / S 4x18W 612 - 605 SAC 140 / S (1x4) 1x36W 1222 - 302 SAC 240 / S (1x4) 2x36W 1222 - 302 SAC 240 / S 2x36W 1222 - 605 SAC 340 / S 3x36W 1222 - 605 SAC 440 / S 4x36W 1222 - 605 Note : Subject to +/- 1.5mm IP20 G13 W1(MM) - H(MM) 97 97 97 97 97 97 97 97 97 H1(MM) - *SJ Lite reserves the right to change and amend the specification without prior notice. TM CLASS 1 38