Transcript
3D-Theatre+ User’s Guide
Thank you for purchasing this 3D-Theatre+™ product. • Before using this product, be sure to read all safety precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official 3D-Theatre+™ website at www.3D-VIP.com
2
IMPORTANT SAFETY INSTRUCTIONS
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
TABLE OF CONTENTS
Always comply with the following safety precautions to avoid dangerous situations and ensure peak performance of your product
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
!
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
CAUTION: CHILDREN AND TEENAGERS MAY BE MORE SUSCEPTIBLE TO HEALTH ISSUES ASSOCIATED WITH VIEWING IN 3D AND SHOULD BE CLOSELY SUPERVISED WHEN VIEWING THESE IMAGES.
2
IMPORTANT SAFETY INSTRUCTIONS
3
TABLE OF CONTENTS
4
INTRODUCTION
4 4 5 5 5
3D-Theatre+™ Features Before using 3D-Theatre+™ Unpacking Additional Items Required Optional Accessories
6
INSTALLATION
6 7 7 8 10
Product Overview Connecting to Devices The End Plate HDMI IN The End Plate HDMI OUT Playing 3D Content
12
SPECIFICATIONS
14
TROUBLESHOOTING
18
CERTIFICATION & NOTICES
18 18 18 19 19 19 19
FCC Notice Declaration of Conformity for EU countries Class B Emissions limits Trademark, Registered Trademark Disclaimer Service & Warranty Registration & Contact Information
3
4
INTRODUCTION
INTRODUCTION 3D-Theatre+™ Features •
Watch 3D content on any HDTV or HD Projector with an HDMI input.
•
True 3D viewing of 3D content, in NATIVE 1080p resolution.
•
Extremely quick and easy to connect and use.
•
Using HDMI High Speed cables, simply plug the 3DTheatre+™ between your 3D source - HDTV or HD
5
Unpacking Check your 3D-Theatre+ box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
Package Contents
projector - & you can begin watching true 3D in just minutes.
•
INTRODUCTION
RF Emitter (sold separately) allows you to customize your 3D viewing to your room setting.
3D-Theatre+™ Unit
Power Cord
User’s Guide
*Due to different applications in each country, some regions may have different accessories.
Before Using the 3D-Theatre+™ Additional Items Required
•
Check the TV / Projector manual to see if the device is 120Hz compatible. This will assist in determining the position of Dip Switch #1 – UP for 120Hz and DOWN for 60Hz or anything less than 120Hz.
•
If your display is less than 120Hz, aside from setting the Dip Switch #1 DOWN, you would need to make some manual adjustments to your display to create an optimal 3D viewing experience.
•
RF3D-Theatre+™ Eyewear
(2) HDMI High Speed Cables
Check your source (3D content player) to make sure the device supports 3D content and update the latest firmware from the manufacturer to activate 3D viewing.
•
If using Play Station 3™, you will need to setup PS3 the first time with the 3D-Theatre+ before PS3 will acknowledge you have a “3D Display”.
•
Make sure your 3D content is legitimate and the correct format. 3D-Theatre+ will not support any contents that are not legitimate either during the install or any time thereafter. The contents may come in framepacked format (3D Blu-ray discs or PS3 games), Sideby-Side and/or Top/Bottom (cable/satellite, internet).
RF Emitter (Allows you to customize your 3D viewing to your room setting).
*These additional accessories are required for the 3D-Theatre+ to perform properly. *Accessories may be modified for quality improvement without any notification. Contact your dealer for purchasing.
6
INSTALLATION
INSTALLATION
INSTALLATION Product Overview
Connecting To Devices (End Plate HDMI IN)
Front Panel
2
1
3
1
Insert one end of an HDMI High Speed cable in the HDMI OUT on the 3D-Theatre+™.
2
Insert the other end of the same HDMI High Speed cable in to a TV or Projector.
4
EMITTER
POWER
SETUP
LINK
SBS/ TNB SYNC
Rear Panel
EMITTER SETUP HDMI OUT SBS/ TNB SYNC
5
3 6
7
Set the #1 Dip Switch position to either UP (for 120 Hz) or DOWN (for 60 Hz) shown below.
8 EMITTER
SETUP HDMI OUT
1
2
SBS/ TNB
SYNC
1 +5V / 2A Power Source
5 3-PIN DIN Connector
2 USB Service Port
6 HDMI OUT
3 HDMI IN
7
DIP Switches
4 Indicator Lights
8
SBS/TNB Push Button
4
Din connector cable is connected with the 3DN-100 3D emitter via the emitter sync port. Note: DLP eyewear for use with a DLP projector or TV do not require a transmitter/emitter therefore no cable is needed for the Emitter / Sync port. For eyewear other than 3D-Theatre+™ RF, follow the instructions provided with the glasses.
7
8
INSTALLATION
INSTALLATION
9
Connecting To Devices (End Plate HDMI OUT) 1
Insert one end of an HDMI High Speed cable in the HDMI IN port on the 3D-Theatre+™.
2
Insert the other end of the same HDMI High Speed cable in to any source playing 3D content.
3
Insert the charger to the 5V barrel connector on the 3DTheatre+and plug the charger to the wall outlet.
POWER SERVICE
HDMI IN
LINK 3D
POWER LINK 3D
4
USB connector is not in use and will only be accessed when a new firmware upgrade is provided.
5
The three lights reflect the three stages of setup: • The power light goes on when the power is connected to the 3D-Theatre+™. • The link indicator light will go on when the 3DTheatre+ is connected by the HDMI High Speed cables to the 3D source and the display device. • The 3D light goes on when 3D content is being played.
POWER +5V / 2A SERVICE
HDMI IN
LINK 3D
10
INSTALLATION
INSTALLATION
11
Playing 3D Content •
At this point, the 3D-Theatre+™ is connected to a 3D source and a display device.
+5V / 1 A
•
Turn ON the RF eyewear by gently pressing and holding the ON button on the bottom side of the eyewear.
•
Initially, some flickering is experienced – left/right lens turning on & off – until the emitter syncs with the eyewear.
•
When playing Side-by-Side (SBS) contents, press SBS/TNB button next to the Dip Switch box once.
POWER SERVICE
HDMI IN
EMITTER
INK
SETUP
3D
HDMI OUT
SYNC
•
When the player and the display are powered, POWER light is ON.
•
Upon successful connection between the player and the converter, LINK lights up ON.
•
The transmitter connected via the DIN connector begins flashing red LEDs and then stabilizes to blue LEDs once the link is made between the source and the display
SBS / TNB
•
SBS/TBN Push Button should not be touched until after the 3D contents are playing. Should the 3D light on the other side of the converter come on and the content appear in 3D, you are using 3D frame-packed contents and no adjustment via SBS/TBN button is required. If you see the same contents twice on the screen and in a sideby-side mode, you will need to press SBS/TBN button once for the contents to merge together and the 3D light to come on the 3D-Theatre+™.
•
On the other hand, if the contents are top/bottom on the screen, you will need to press SBS/TBN button twice (once before the picture changes to four quadrant format and twice to merge as one) and the 3D light will come on.
12
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS External Power Requirement
Power via 5V Barrel
MEMO
Input
100-240VAC 50/60Hz 150mA
Output
5.0V 2000mA±50mA
Power Consumption
3 Watt [max]
5V 2A DC
Audio
HDMI audio pass-through
Video
NTSC 480i/p, PAL 576i/p, HDTV 720p/1080i/1080p 3D
Modes Supported
13
Frame Packing
720p60, 720p50, 720p30, 1080p24,1080p25, 1080p30,
Side-by-side
1080i60, 1080i50, 1080p24, 1080p30, 1080P60,720p60, 720p50, 720p30
Top-Bottom
1080p24, 1080p25, 1080p30, 1080P60,720p60, 720p50, 720p30
3D Output
Field Interleaved for 60/120Hz displays
Included In Box
(1) One 3D-Theatre+™ (1) Power Supply (1) User Guide
Required Accessories
3D-Theatre+™ 3DN-6000 Active Shutter Eyewear 3D-Theatre+™ RF Emitter (2) HDMI High Speed cables
Optional Accessories
Additional 3D-Theatre+™ RF 6000 Active Shutter Eyewear
Unit Dimensions
[L x W x H]: 3.9” x 3.9” x 1.5” (10cm x 10cm x 2.5cm)
Unit Weight
8.4oz / 236.8g
Interface (HDMI)
Input
1 x HDMI v1.4a (HDCP)
Output
1 x HDMI v1.3 (HDCP), 3-pin mini-DIN Sync out
Service
USB for firmware upgrades
14
TROUBLESHOOTING
TROUBLESHOOTING
15
TROUBLESHOOTING PROBLEM Experiencing no picture (NO SIGNAL) after installation
Experiencing no picture (NO SIGNAL) after installation
Experiencing message such as “NO SIGNAL”, “ UNSUPPORTED SIGNAL” or similar
Experiencing message such as “NO SIGNAL”, “ UNSUPPORTED SIGNAL” or similar
Steps to adjust TV / Projector for the best picture quality
SOLUTION
PROBLEM
•
If using Play Station 3™ as a player, go to the settings and select VIDEO SETTINGS. Go down the menu until you see “BD… 1080 24Hz …Automatic”. Change this setting to OFF.
Experiencing “NO SIGNAL” message when the box is connected to a display at 120Hz
•
If using Play Station 3™ as a player, go to the DISPLAY SETTINGS and select HDMI and Automatic to configure the player to work with the 3D contents. Make sure the 3DTheatre+is connected when going through the settings.
All three indicator lights are NOT ON
•
Check to make sure your USB cable is connected to the wall connector with 5V/2A power. The 3D-Theatre+ may not be getting enough power via USB connected to the other device.
Only the POWER indicator light in ON. LINK and 3D indicator lights are OFF
•
Check to make sure your television is set to the right HDMI connection by going to MENU on the TV, selecting INPUT and selecting the right HDMI connection # - check the # where you inserted the HMDI High Speed cable in the TV.
3D indicator light is NOT ON
•
Go to the MENU on TV / Projector, select PICTURE and go to the mode and switch between STANDARD, CUSTOM, GAME, SPORT, CINEMA, EXPERT (options vary between different devices).
Emitter lights are NOT ON
SOLUTION
•
Change Dip Switch #1 to down position, remove USB cable from the back of the box, plug it back in after five seconds and see if you get the picture. If you do, the television is not true 120Hz and operates at 60Hz (regardless of marketing material/product specifications).
•
Your connections are bad. Unplug all cables and reconnect them.
•
Unplug and re-plug HMDI High Speed cables from both devices and the 3D Now Theater™.
•
Check to make sure you are using legitimate 3D content.
•
Unplug and re-plug 3-pin DIN connector.
16
TROUBLESHOOTING
MEMO
TROUBLESHOOTING
17
MEMO
18
CERTIFICATION AND NOTICES
CERTIFICATION AND NOTICES
19
CERTIFICATION AND NOTICES FCC Notice
Trademark, Registered Trademark
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
HDMI, HDMI High Speed and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC. Other brand or product names are trademarks or registered trademarks of their respective holders.
NOTE: This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Disclaimer
However, there is no guarantee that interference will not occur in a particular installation.
3D-VIP, its distributors, dealers, and resellers shall not be responsible for any harm resulting from viewing 3D content. 3D viewing by a small percentage of the population may experience eye strain, headaches, or other symptoms. Please remove 3D-Theatre+™ glasses immediately if any discomfort occurs. Parents: Please consult with your physician before allowing young children to view 3D content. For more information please visit our website: www.3D-VIP.com.
Service & Warranty Declaration of Conformity for EU Countries When using this device in Europe: COMPLIANCE NOTICE This device complies with the requirements of the EC Directive 2004/108EC “EMC Directive”, 2006/95/EC “Low Voltage Directive” and the R & TTE Directive 1999/5/EC (if product has RF function) Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it.
Class B emissions limits This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet apparel numérique de la classe A estconforme à la norme NMB-003 du Canada.
One (1) year limited warranty. See website for full warranty. Technical support via email (
[email protected]) and phone 877-456-0693 or international +1-561-358-1328. Register online at: www.3D-VIP.com
©2012 3D-Theatre+. All rights reserved. All trademarks are property of their respective owners. Specifications are subject to change without notice. 3D-Theatre+™ is not responsible for typographical errors or omissions. MADE IN USA
3D-Theatre+ Quick Start Guide What’s included in the box
3D-Theatre+Unit
1
Power Cord
User’s Guide
Insert one end of an HDMI cable into the HDMI OUT on the 3D-Theatre+™. Insert the other end in to a TV or Projector. EMITTER SETUP HDMI OUT SBS/ TNB SYNC
2
Insert the charger to the 5V/2A connector port on the 3D-Theatre+ and plug the charger into the wall outlet POWER LINK 3D
3
The three lights reflect the three stages of setup The power light goes on when the power is connected to the 3D-Theatre+™. The link indicator light will go on when the HDMI cables are connected to the unit and 3D source. The 3D light goes on when 3D content is being played. POWER
+5V / 2A SERVICE
HDMI IN
LINK 3D
3D-VIP Customer Information Centre
Direct Phone Number Direct Fax Number Support Inquires
(561) 358-1328 (866) 596-3027
[email protected]
For more details, visit our website at
www.3D-VIP.com Copyright © 2012 Video Innovation Products LLC
DIP SWITCH SETTINGS FOR 3D-Theatre+
DIP
UP
DOWN
1
120Hz
60Hz
UP - only when using a 120Hz refresh rate display
2
720p
1080p
3D MODE: 1080p - applicable in 60Hz or DIP 1 is in DOWN position
3
N/A
72Hz
3D MODE: 720p/72Hz. #3 down will override the #1 position
4
N/A
96Hz
3D MODE: 720P/96Hz. #4 down will override the #1 position
