3g/hd/sd-sdi Analog Audio Embedder Cro

Transcript

3G/HD/SD-SDI analog audio embedder CRO-EMB12 CRO-EMB12 is a low-price, space-saving 3G/HD/SD-SDI analog embedder. It embeds and output 2-channel analog audio to 3G/HD/SD-SDI. The audio group selection, embedded-mode setting, and audio level adjustment are possible through onscreen menu. For embedded audio inputted in SDI, it can adjust audio levels and mix other analog audio input. It can pass through non–related input, SDI and audio group signals. ※ It can process only one audio group. ※ There is no audio delay function. z Automatically corresponds to 3G, HD, and SD-SDI inputs. z It can group select and embed unbalanced 2 channels audio. z Onscreen menu includes, audio input level adjustment (synchronized, individual), group selection and embed mode selection. (If there is embedded audio in input SDI, choose whether to deletes or not delete the data before embedding). z Durable design made possible by compact postcard-sized metal case. z Power supplied from external AC adaptor power unit. The power supply unit jack and cable can be secured with commercially available cable tie.. z Rack mount fitting MK-CRO103 separately sold. Input 3G/HD/D1-SDI: 1 x NRZI 0.8 V(p-p) 75 Ω BNC connector 3G-SDI SMPTE424M/425M-AB HD-SDI SMPTE292M, SD-SDI SMPTE259M-C Input cable compensation: 3G-SDI 100m (Pathological test signal using 5CFB cable） HD-SDI 150m (Pathological test signal using 5CFB cable） SD-SDI 200m (Pathological test signal using 5C2V cable) Active loop through: 1 x NRZI 0.8 V(p-p) 75 Ω BNC connector Distributes equalized and re-clocked SDI signal. Video formats: 3G-SDI [email protected] 1080p@50 HD-SDI [email protected] 1080i@50 SD-SDI [email protected] 576i@50 (YPbPr 4:2:2 10bit) Audio: SMPTE299M, SMPTE272M-C Embedded digital audio (48kHz CRO-EMB12 synchronization) Audio input signal: Unbalanced stereo, 2 channels, -10dBu 50kΩ, via 2 RCA jack connectors Output 3G/HD/D1-SDI: 1 x NRZI 0.8V(p-p), 75Ω, via 2 BNC connectors 3G-SDI SMPTE424M/425M-AB HD-SDI SMPTE292M Video formats: SD-SDI SMPTE259M-C 3G-SDI [email protected] 1080p@50 HD-SDI [email protected] 1080i@50 SD-SDI [email protected] 576i@50 (YPbPr 4:2:2 10bit) Audio: SMPTE299M, SMPTE272M-C Embedded digital audio (48kHz synchronization) Video delay: < 2 μs Audio delay: < 2 ms Other functions: Function setting through onscreen menu (semi-permanent back up) Test pattern and tone generator. Input SDI status indicator, and others. Operating temperature and humidity: 0℃ to 40℃ and 20% to 90%RH (non-condensing) Storage temperature and humidity: -20℃ to 70℃ and 20% to 90%RH (non-condensing) Power supply: DC 5V Power consumption: 5 W (Max.) Weight: 550g Dimensions: 100 mm(W) x 25 mm(H) x 150 mm(D) (projecting parts not included) Accessories: 1 x AC adapter (Input voltage AC 90V to 240V, output power DC 5V 2A 10W) < Figuration Drawing > SER.No CH-1 (AUDIO) CH-2 100 OUTPUT 3G/HD/D1-SDI to DVI(HDMI) CONVERTER MODEL : CRO-SDC2A MADE IN JAPAN ACTIVE THROUGH OUT ACTIVE THROUGH OUT INPUT 3G/HD/D1 SDI IN 3G/HD/D1 SDI IN DVI(HDMI) OUTPUT D1 CH-2(AUDIO)CH-1 SET HD INPUT 3G/HD/D1-SDI to DVI(HDMI) CONVERTER CRO-SDC2A 3G/HD/D1-SDI IN 3G 3G/HD/D1-SDI to DVI(HDMI) CONVERTER CRO-SDC2A MENU RET/ENT (KEY.L 2sec) POWER DC 5V 1.0A 5W DC 5V 1.0A 5W POWER DVI(HDMI) CRO-EMB12 150 25 20 100 Back side of the rack mount is secured by M 3x4 countersunk screws ※ There are four M3x10 (MAX) type screw holes on the chassis for mounting. ※ It has the structure that can install a cable tie for holding power unit jack. ※ EIA19 1U rack mounting frame MK-CRO103A is optional. ※Specifications and functions subject to change without notice. SR1.1, R00