Transcript
EO3G-200
3G-SDI/HD-SDI/SD-SDI Electric to Optical Converter EO3G-200
1. Abstract Electric to Optical Converter for 3G-SDI / HD-SDI / SD-SDI digital video signal Recommended to install in CANARE 161UPSC / 6PSC converter platform ●Features
・Cable equalizer and re-clocker equipped ・A monitor out terminal equipped ・Capable of receiving and transmitting pathological test pattern(SMPTE PR-178,198 Check Field Test Pattern) ・Capable of receiving 3G-SDI signal through CANARE L-5CFB cable of longer than 100m. ・Supports multi-rate, multi-format(3G-DSI / HD-SDI / SD-SDI / DVB-ASI) ・Small size (2 slot size for 161UPSC) ・Low power consumption ● Application
・Optical transmission for inside use in broadcasting station. ・Optical transmission for inter-station use ・Dark fiber use ●Standards
・SMPTE 259M,292M,297-2006,424M ・BTA S-004C ・EN50083-9 ●Certifications
・FDA21 CFR Part1040.10,11 with LN50, Class 1 ・IEC 60825-1:2007 ・FCC Part15 Class A ・UL / c-UL ・CB scheme ・CE marking ●Operating
Environment
・RoHS compliant
SBW150E
May. 2013 Rev.1.0
1/7
EO3G-200 2. Diagram 5V DC-DC Converter
75 Ohm BNC
Cable Equalizer
75 Ohm BNC
Cable Driver
ReClocker
Laser Driver
3. Specifications 3-1. Absolute ratings Items Storage temperature Supply voltage(DIN 2pin & 10pin）
Ratings -40°C ～ 85°C -0.3V ～ 6.5V
3-2. Recommended operating conditions Items Supply voltage(DIN 2pin & 10pin） Temperature Humidity
Operating conditions 5 V±0.25V 0°C ～ 40°C 30% ～ 85% (without condensation)
3-3. Transmission signals, bit rates Transmission signals 3G-SDI HD-SDI SD-SDI/DVB-ASI
3-4.
Bit rates 2.97Gbps、2.97/1.001Gbps 1.485Gbps、1.485/1.001Gbps 270Mbps
Optical specifications Optical interface Number of output ports Optical connector Fiber Laser device
1 LC SM10/125 FP laser (1310nm)
SBW150E
May. 2013 Rev.1.0
2/7
EO3G-200 Optical performance （Under recommended operating condition） Items Central wavelength Wave width Optical output power Extinction ratio Rise time/ Fall time Jitter
Min. 1280
Typ. 1310
-7.0 7.0
-5.0 9.5
Max. 1340 3 -3.0 135 100
Unit nm dBm dB ps
Caution Do not watch laser beam directly whenever this product works. Even if the beam is from optical connector, your eyes may be damaged. Laser safety This product equips Class 1 laser products, which complies with FDA 21 CFR 1040.10,11 with LN50, Class 1.
3-5.
Electric specifications Electric interface Number of input ports Input impedance Input Connector
1 75Ω BNC
Number of output ports Output impedance Output Connector
1 75Ω BNC
Electric performance （Under recommended operating condition） Items Minimum transmission bit rate Current consumption Input signal level (0m Cable) 5M ～1.5GHz Return loss 1.5G ～3.0GHz Monitor Out signal level (75Ω load) 5MHz～1.5GHz Return loss 1.5GHz～3.0GHz SD-SDI Rise time /fall time 3G-SDI/HD-SDI SD-SDI Alignment jitter HD-SDI 3G-SDI SD-SDI Timing jitter HD-SDI 3G-SDI Monitor output level High （DIN connector） Low
SBW150E
Min.
720 15 10 720 15 10 400
Typ. 125 300 800
400 950
Unit Mbps mA mVpp dB
800
880
mVpp dB
90
4.2 0
Max.
800 130 0.2 0.2 0.3 0.2 1.0 2.0
ps
UI
5.0 0.4
V
May. 2013 Rev.1.0
3/7
EO3G-200 3-6. LED indication LED name
Indication Lock to 3G-SDI / HD-SDI ：Green Lock to SD-SDI / DVB-ASI ：Yellow Unlock ：No lighting Laser on ：Green Laser off ：No lighting
3GHD/SD LD
3-7. Structure Items
Spec. 35.5mm(W)×43.4mm(H)×78mm(D) (Except protuberance such as connectors) Approx. 150 g
Size Weight
4. Appearance (Unit:mm)
SBW150E
May. 2013 Rev.1.0
4/7
EO3G-200 5. Part name and function
1) 2) 3) 4) 5)
Captive Screw BNC Connector BNC Connector LC Connector Status LED(LD)
6) Status LED(3GHD/SD) 7) DIN Connector(16-pin) 8) Connector Label 9) ID Label
To fix this product to the platform. For connection with 75Ω coaxial cable to monitor the input signal. For connection with 75Ω coaxial cable to input the signal. For connection with SM optical fiber. Green light comes on when an optical signal is input. Green light comes on when 3G-SDI or HD-SDI signal is input. Yellow light comes on when SD-SDI or DVB-ASI with 270Mbps signal is input. For the power supply and status signal outputs. Production No. described. Describes the model name, rating, certifications, and so on
6. DIN Connector Pin assign Pin number 1,9 2,10 3
Pin name GND 5V /LOCK
6 7 8 11
DIS0 DIS1 DIS2 /LD
12
HD/SD
14 15 16 4,5,13
SS2 SS1 SS0 NC(Reserved)
Function Electrical ground DC5V power input Re-clocker Status output CMOS open drain (Pulled up to 5V with 100K ohm internally) Lock ：Lo Unlock ：Hi Plug in ID output DIS0:Lo, DIS1:Lo, DIS2:Lo Laser status monitor output CMOS open drain ( Pulled up to 5V with 100K ohm internally ) Laser on ：Lo Laser off ：Hi Input signal ID output CMOS open drain ( Pulled up to 5V with 100K ohm internally ) SD ： Lo 3G/HD： Hi Bit rate information SS2/SS1/SS0:all “Lo” Not use
SBW150E
May. 2013 Rev.1.0
5/7
EO3G-200 7. Typical operating characteristics 2.97Gbps
L-5CFB:100m
1.485Gbps
270Mbps
L-5CFB:200m Optical eye pattern
L-5CFB:400m
L-5CFB:100m L-5CFB:200m Optical power vs. error rate （Receiver: Canare reference OE3G-101）
0
Frequency (GHz) 3.0
1.5
10
Return loss (dB)
SMPTE Spec.
20
30
40
SDI IN Return loss characteristics
Monitor OUT Return loss characteristics
SBW150E
May. 2013 Rev.1.0
6/7
EO3G-200
Electrical output wave form
8. Revision history May. 2013 :Rev.1.0 9. Contact point Japan 4th FL, Phone Fax E-mail Web
WN Bldg., Shin-Yokohama, Kohoku-ku, Yokohama-shi, Kanagawa, 222-0033 Japan : +81-45-470-5674 : +81-45-470-5676 :
[email protected] : www.canare.co.jp/oversea/mainmenu.html
USA 45 Commerce Way, Unit C, Totowa, New Jersey, 07512 USA Phone : +1-973-837-0070 Fax : +1-973-837-0080 E-mail :
[email protected] Web : www.canare.com
Europe 14-30, rue de Mantes 92700 Colombes France Phone : +33(0)1 42 42 16 23 E-mail :
[email protected] Web : www.canare.fr
This document may be revised without advanced information.
SBW150E
May. 2013 Rev.1.0
7/7
