Transcript
3M™ Active Optical Cable (AOC) Assemblies for QSFP+ to SFP+ Applications The new 3M Active Optical Cable (AOC) Assembly for QSFP+ to SFP+ Applications compliments and builds on the family of AOC products released by 3M. The QSFP+ to SFP+ is commonly known as a “fanout” assembly. The QSFP+ fanout is a hybrid AOC that transitions from a QSFP+ on one end to four individual SFP+ connectors on the other. The QSFP+ fanout offers four parallel, bi-directional channels each operating at up to 10.3125 Gbps. Using industry leading VCSEL technology, an advanced new light-engine design and bend insensitive multimode fiber, this AOC delivers exceptional cost and performance value for 10 and 40GbE applications at distances of up to 100 meters.
Applications
Key Features • Supports 40G to 10G Ethernet interoperability • 3M low power brand promise • 3M 2-year active optical warranty • No optical splices — seamless fiber from end-to-end • Less cabling to order and manage • Simplify cable installation • Aggregate 4 discrete SFP+ 10G channels into single parallel QSFP+ 40G interface
• Optimize network cabling by offsetting the delta between switch and server ports (1:4) • Light weight, very small fiber outer diameter — easy to dress-out, route and manage for better airflow and aesthetics • Lengths up to 100 meters • RoHS Compliant*
4
3
• Data Centers with 10GbE requirements with ToR and Aggregation Architectures • Network Switch Manufacturers supporting 40/10 GbE • Server Manufactures supporting 10/40 GbE • Manufactures of 10GbE Host Card Adapters (HCA/NIC) • System Integrators
2
Technical Drawing
3M TM Active Optical Cable (AOC) Assembly for QSFP+ to SFP+ Applications Visit http://www.3Mconnectors.com
1
+100 D 1000 -50
113.2
D
D
16.80 18.35
Ø3.00±0.15
3.0mm FANOUT TUBING CH ID LABEL
8.65
8.50
47.62 NOTES: 1. RoHS COMPLIANT. SEE REGULATORY INFORMATION APPENDIX IN "RoHS COMPLIANCE" SECTION AT www.3Mconnectors.com (E1 & C1 APPLY)
D
B
2. HALOGEN-FREE IS DEFINED AS BOTH (1) NO HALOGEN COMPOUNDS ARE INTENTIONALLY ADDED TO THE PRODUCT OR USED IN THE MANUFACTURING PROCESS FOR THE PRODUCT, AND (2) ANY IMPURITIES PRESENT ARE LESS THAN 900 PPM BROMINE, LESS THAN 900 PPM CHLORINE, AND/OR LESS THAN 1500 PPM TOTAL BROMINE AND CHLORINE. THE LATTER ARE THE LEVELS SET FORTH IN CERTAIN INDUSTRY STANDARDS FOR PRINTED CIRCUIT BOARDS, SUCH AS THE INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) 61249-2-21STANDARD. 3. HOUSING MATERIAL: ZINC ALLOY;
13.60 D
58.12
REVISION
+400 -0
C DRAWING NUMBER
C
(STANDARD LENGTHS)
78-5100-2576-6
65.20
FANOUT CH ID LABEL CH 1
ORANGE
CH 2
ORANGE
CH 3
ORANGE
B
3M™ Active Optical Cable (AOC) Assemblies for QSFP+ to SFP+ Applications Ordering Information
Product Specifications
Module Form Factor(s)
QSFP+ (SFF8436) SFP+ (SFF8431/SFF8432)
6A25 – A04x1 – xxx.x – 0
Protocols supported
10G/40G Ethernet
A = 10G Gbps
Channels
4 channels, bi-directional
Channel Data Rate
Up to 10.3125 Gbps/channel
Operating Optical Wavelength
850 nm
BER
<10-12 BER
Operating Case Temperature
0° to +70ºC
Storage Temperature
0° to +85ºC
Supply Voltage
3.3V nominal
Electrical Interface
QSFP+: 38-pin edge connector SFP+: 20-pin edge connector
Power Consumption
QSFP+: 0.71 W per end typical SFP+: 0.24 W per end typical
Management Interface
Serial, I2C (SFF8472)
Fiber Type
OM2+, 50 µm bend insensitive
Cable Length
Up to 100 m
Fanout length
0.5 m standard
Outer Cable Diameter
3 mm
Cable Type
Plenum
Compliance
FCC Class B and CE Emmissions & Immunity EN 61000 4-3 RoHS 2011/65/EU Class 1 per IEC 60825-1/CDRH Telcordia GR-2866-CORE Telcordia GR-468-CORE
Length in meters Cable Jacket 2 = Plenum 4 = LSZH
Customer drawing number 78-5100-2576-6 Supporting 1-100 meters. Standard lengths in meters: 3, 5, 7. 10, 12, 15, 20, 25, 30, 40, 50
“Unless otherwise noted, references to industry specifications are intended to indicate substantial compliance to the material elements of the specification. Such references should not be construed as a guarantee of compliance to all requirements in a given specification. Halogen-free is defined as both (1) no halogen compounds are intentionally added to the product or used in the manufacturing process for the product, and (2) any impurities present are less than 900 ppm bromine, less than 900 ppm chlorine, and/or less than 1500 ppm total bromine and chlorine. The latter are the levels set forth in certain industry standards for printed circuit boards, such as the International Electrotechnical Commission (IEC) 61249-2-21standard. “RoHS 2011/65/EU” means that the product or part does not contain any of the substances in excess of the maximum concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
3M is a trademark of 3M Company.
Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of two years from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3 Electronic Solutions Division Interconnect Products 6801 River Place Blvd. Austin, TX 78726-9000 1-800-225-5373 www.3Mhighspeed.com
Please recycle. Printed in USA © 3M 2013. All rights reserved. 80-4000-7030-8
