Transcript
In Win
Storage Chassis 4-Port 6Gb/s SAS/SATA Backplane
User’s Manual 2015/08/06
No.57, Ln. 350, Nanshang Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Tel:+886-3-322-9898 Fax:+883-3-321-1992 Http://www.in-win.com
1
Backplane User’s Manual
Copyright Copyright © 2014 IN WIN DEVELOPMENT INC., Ltd... All rights reserved. Unless otherwise indicated, all materials in this manual are copyrighted by IN WIN DEVELOPMENT INC., All Rights Reserved. No part of this manual, either text or image may be used for any purpose other than internal use within purchasing company. Therefore, reproduction, modification in any form or by any means, electronic, mechanical or otherwise, for reasons other than internal use, is strictly prohibited without prior written permission. IN WIN DEVELOPMENT INC., reserves the right to make improvement and modification to the products indicated in this manual at any time. Specifications are therefore subject to change without prior notice. Information provided in this manual is intended to be accurate and reliable. However, IN WIN DEVELOPMENT INC., assumes no responsibility for its use, nor for any infringements upon the rights of third parties, which may result from its use.
Technical Support In win works hard to offer our customers maximum performance from our chassis. But in case you have any problem with our product you can find supports from the following resources.
Web Support Detail information of our products is in our website. You can find technical updates, installation guides, FAQs technical specifications and more. Our web address is: www.in-win.com
Phone Support You can also contact In Win HQ or branch office for immediate support; contact Information is as following: In Win HQ
In Win USA
In Win UK
In Win NL
Tel:+886-3-322-9898
Tel:1-909-348-0588
Tel:+44 1442 250977
Tel:+31(0)180-530-150
Fax:+886-3-321-1992
Fax:1-909-348-0599
Fax:+44 1442 241761
Fax:+31(0)180-519-443
The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.
2
Backplane User’s Manual
Contents Technical Support Copyright Revision History Backplane Specification Backplane Layout Backplane Assembly
The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.
3
Backplane User’s Manual
Revision History Date Nov/11/2014 Aug/06/2015
The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.
Modification ●First release(V1.0) ●modify back-plane P/N(V1.1)
4
Backplane User’s Manual
Backplane Specification
PCB DIMENSION : 111mm X 111 mm X 1.6mm PCB LAYERS : 2 COMMUNICATION INTERFACE : SATA/SAS 6.0Gbit/s COMPATIBLE INTERFACE DC POWER CONNECTOR : 2 SATA HDD 29 PIN CONNECTOR : 4 SATA Connector: 4 FAN CONNECTOR (4PIN) : 1 (PWM TYPE) ON BOARD LED : (A) HDD POWER LED (BLUE) WHEN HDD is present -------- ACTIVE (B) HDD ACCESS / FAIL LED (GREEN / RED) WHEN HDD R/W -------- ACTIVE (GREEN) WHEN HDD FAIL ------- ACTIVE (RED) ACCESS SINNAL : Always from device
ON BOARD Temperature SENSOR : 1(RT1) Pin header 2.54mm (2x4) *1 for SGPIO DIP Switch 4pin x1 Temperature alarm table: (Default 47℃)
Pin header 2.54mm (2x4) *1 for External LED Alarm mute switch*1 ALARM BUZZER (A) Fan fail(single beep) (B) Temperature fail(double beep)
Accommodation Chassis ● MS04-01
The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.
5
Backplane User’s Manual
Backplane Layout
(A) Power Connector x 2 Pin No.
Descriptions
1
12V
2
GND
3
GND
4
5V
The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.
6
Backplane User’s Manual
(B) Fan Connector Pin No.
Descriptions
1
GND
2
+12V
3
Fan Clock Input
4
Fan PWN Output
(C)Fan Setting
(D) SGPIO SIGNAL CONNECTOR Pin No.
Descriptions
Pin No.
Descriptions
1
NC
2
SG_DI
3
GND
4
SG_DO
5
SG_LD
6
GND
7
SG_CK
8
GND
The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.
7
Backplane User’s Manual
(E) HDD Fail signal input Pin No. 1 2 3 4 5 6 7 8
Descriptions HDD1 Fail LED HDD1 Fail LED + HDD2 Fail LED HDD2 Fail LED + HDD3 Fail LED HDD3 Fail LED + HDD4 Fail LED HDD4 Fail LED +
(F) Mute Switch
(G) Buzzer (A) Fan fail(single beep) (B) Temperature fail(double beep)
(H) SATA Connector x4
The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.
8
Backplane User’s Manual
Led Indicator
LED Power Led HDD Led HDD Led
Status Power On Active Fail
Color Blue Green Red
Backplane Layout The In Win 4 -Port 6Gb/s Backplane can be assembled on In Win Storage Server Chassis MS04-01. Please refer to the chassis Quick Installation Guide.
The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.
9
Backplane User’s Manual
The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.
10
