Preview only show first 10 pages with watermark. For full document please download

4 Port Signal Repeater: Gsm900 + Umts Part No.: Sd‐rp1000gw‐4

   EMBED

Share

Transcript

4 port Signal Repeater: GSM900 + UMTS Part No.: SD‐RP1000GW‐4 The SD‐RP1000GW‐4 repeater boosts the signal strength and coverage for all GSM 900 and UMTS/ 3G services. It is compatible with all Irish / UK/ European mobile phone operators. Designed and Manufactured in Ireland, EU Repeater Specifications Frequency band Specification: Indoor and Outdoor antenna 880 ‐ 960MHz + 1.92 ‐ 2.17GHz 2 2 Nominal Gain 6.4dBi / 9.4dBi Coverage 1000m per antenna (4000m total) 3dB beam Pattern 60º x 60º No. of people >100 Bandwidth 800‐2500MHz Gain Uplink Gp > 50dB VSWR <1.4 Downlink Gp> 60dB Front to Back Ratio > 20dB Pass band ripple < 4dB Polarization Vertical I/O impedance 50 ohm/N connector Power Rating 50W No. of Ports Input Port: 1 x SMA Impedance 50‐OHM Max signal strength Output Port: 4 x SMA 14dBm Termination SMA male (Indoor Antenna) N‐Female (Outdoor Antenna) Ambient Temperature ‐30 C to +70 C Cross Pol. Discrimination ‐20dB Power supply input 110 ‐ 240V AC Dimensions 210 x 180 x 43mm Power supply output 12V DC Weight 0.68kg Oscillation Control Automatic Rated wind velocity 126km/hr Level control Automatic * Working temperature o o ‐40 C to +65 C AGC range 30dB Surge protection SMA connectors DC grounded Power Supply Specification 12V DC port MOV protected AC input o o 100‐240V 1.2A Mechanical Specifications ‐ Repeater 50‐60Hz Length 32cm Width 19cm DC output 3A max Depth 3.5cm 30W Max Weight 1Kg Mounting 4 x 5mm holes for mounting Typical power usage 12V 20W * Automatically adjusts during installation. Thereafter, automatically adjusts for seasonal variation in pathloss between Basestation and Outdoor Antenna Specification subject to change without notice