4 Safety And Signaling

Transcript

EUROPEAN STANDARD SINCE 1963 4 SAFETY AND SIGNALING www.intertruck.com INDEX FIRE EXTINGUISHERS 265 HORNS AND BUZZER 266 REVERSING ALARMS 267 CAMERA SYSTEM 270 MARKER SIGNS 275 ADR ITEMS 292 MARKING TAPE 301 REFLECTORS 302 264 4 FIRE EXTINGUISHERS FIRE EXTINGUISHER Dry powder extinguisher Available in 1-2-6-9 and 12 kg. With mounting support. 6-12 kg fitted with manometer. Only suitable for the Dutch market. Characteristics of dry powder extinguisher: - Does not conduct electricity - Can be used effectively both outside and inside - Not susceptible to frost - Reduces visibility in small spaces - Causes much accessory damage Fire extinguisher classification: A: Fires burning on solid materials, primarily organic, which normally blaze as they burn: wood, paper, textiles, rubber B: Fires burning on liquids or substances that have become liquid: petrol, benzol, oil, grease, paints, tar, alcohol C: Fires burning on gases: methane, propane, hydrogen, acetylene, natural gas Description Part number 1 kg ABC extinguisher 08951 2 kg ABC extinguisher 08953 3 kg ABC extinguisher 08955 6 kg ABC extinguisher 08961 9 kg ABC extinguisher 08963 12 kg ABC extinguisher 08967 Mounting support for fire extinguisher 6 kg Mounting support for fire extinguisher 9-12 kg 08985 08986 EUROPEAN STANDARD SINCE 1963 265 SAFETY AND SIGNALING HORNS AND BUZZER Claxon Universal Metal model. Available in 12 and 24V. 2 push-on connections. Diameter Height : : Ø 112 mm 34 mm Voltage Part number 12V 00925 24V 00926 TR99 Plastic housing, 12V. 2 push-on connections. Low tone. Voltage Part number 12V 08793 Air horns Air horn fitted with an electromagnetic valve that works with both 12 and 24 Volts. Compact model. Metal housing and plastic horn. Comes with metal connector for 8 mm pipe. Frequency 425 Hz, 118db. OEM equipment on DAF. Length Width Horn : : : 215 mm 145 mm Ø 110 mm Description Part number Air horn 08790 Buzzer Plastic version. With 2 push-on connections. Available in 12 and 24V. Suitable for warning of insufficient pressure in the air pressure or oil pressure system. Diameter Height : : Ø 38 mm 34 mm Voltage Colour 12V Black 24V Red 266 Part number 00292 00293 4 REVERSING ALARMS Standard, fixed volume 90 db. 1000 Hz - Suitable for 12 to 24V - Plastic housing - IP65 waterproof - With CE approval Diameter Thickness : : Ø 49 mm 46 mm Description Part number Reversing alarm 08878 90 db. 1300 Hz - Suitable for 12 to 24V - Plastic housing - Splash proof Diameter Height Thickness : : : Ø 64 mm 78 mm 93 mm Description Part number Reversing alarm 08871 90db. 3300 Hz - Suitable for 12 to 24V - Plastic housing - Splash proof - With additional connection for the tail light, for deactivating the alarm when the tail light is on. Diameter Height Thickness : : : Ø 46 mm 60 mm 50 mm Description Part number Reversing alarm 08877 EUROPEAN STANDARD SINCE 1963 267 SAFETY AND SIGNALING REVERSING ALARMS Standard, fixed volume 95 db. 850 Hz ADR/VLG. - Suitable for 24V - Plastic housing - Splash proof - Especially for ADR/VLG transport Diameter Height Thickness : : : Ø 65 mm 73 mm 123 mm Description Reversing alarm Part number 08870 BA15s beeper Reversing lamp and alarm as replacement for standard light bulb 24V - 21W Description Part number BA15s beeper 00927 Variable volume 82-102 db SA 400. - Suitable for 12 to 24V - Plastic housing - IP68 waterproof - With CE approval Width Height Thickness : : : 100 mm 72 mm 32 mm Description Part number Reversing alarm 08882 268 4 Variable volume 87-112 db. 1250 Hz - Suitable for 12 to 24V - Metal housing - Splashproof - Variable volume, adjusts automatically to ambient noise levels - Complies with SAE J944 standard Length : 156 mm Width : 85 mm Height : 108 mm Description Reversing alarm Part number 08876 Nightshift Reversing alarm with NIGHTSHIFT technology. This makes it possible to reverse at night in urban areas without causing noise. The sound is switched off or reduced. - Suitable for 12 to 24V. - 1100 Hz - Black plastic housing - Splash proof according to IP67 - with CE approval Length Width Height : : : 91 mm 49 mm 41 mm dB Part number 90 to 0 08868 90 to 78 08869 BBS TEK BBS TEK offers a unique sound, of which the direction and location can be determined accurately. The broadband sound is expressed in several frequencies, which means that its effect causes less nuisance. - Suitable for 12 to 24V - Black plastic housing - Non-spark - E and CE-approval - Water resistant according to IP68 dB 87 92 Length 90 mm 127 mm Width 39 mm 65 mm Height 49 mm 76 mm Part number 08881 08880 EUROPEAN STANDARD SINCE 1963 269 SAFETY AND SIGNALING CAMERA SYSTEM Reversing camera system CRT heated General Set includes: 1 heated camera, display, sunshade for display, Distance measurement, 20 metre cable and connectors. with E-approval. Display - Black/white - Screen size: 5.5” - Built-in speaker with volume control - 2 camera-inputs - Contrast & Brightness controls - Automatic rear-view display whenever reverse gear is engaged - Day/night control - Audio/video in- and outputs - Operating voltage: 10V ~ 32V - 5G shock resistant - Operating temperature: -15°C ~ 50°C - Dimensions: 176 x 127 x 196 (WxHxD) - Weight 1,5 kg Camera - Black/white - Built-in microphone - Automatic heating - Automatic shutter - Automatic electronic iris - Ultra low light intenisty 0.5 lux - Mirror/normal image via external switch - 1/3” CCD Imaging sensor - 10G Shock resistance - 120° Wide angle lens - IP67 waterproof - Operating temperature: -30°C ~ +50°C - Dimensions: 103 x 83 x 84 (WxHxD) - Operating voltage: 12V (distributed from display) - Weight 0,5 kg Description Length Camera set Display black/white for set 15502 Heated camera B/W for display 15525 Additional heated camera black/white only for display 15525 Extension cable 25 m Extension cable 20 m 270 Part number 15502 15525 15527 15512 15520 15521 4 Reversing camera system LCD unheated General Set is supplied with unheated camera, LCD screen, control box, remote control, 20-metre cable and connection materials. With E certification. The control box can be used to connect a TV and/or video/DVD to the LCD screen and also acts as the converter for the LCD screen. LCD-screen - Colour TFT LCD screen - Screen size 6.8” (effective) - Auto dimmer function - Audio/video in and outputs - Integrated speaker with volume control - 3 camera inputs (via control box) - Including remote control - Automatic rear-view display whenever reverse gear is engaged - On-Screen Display - PAL camera inputs - Operating voltage: 12V (via control box) - Operating voltage of control box: 10V ~ 32V - Screen dimensions: 195 x 140 x 28 (BxWxD) - Operating temperature: -10°C ~ +50°C Camera - Colour - Aluminium die-cast housing with sunshade - Integrated microphone - Automatic iris system - Electronic light intensity adjustment - Minimum light intensity required 0.5 lux - 1/3” CCD imaging sensor - 10G shockproof - 6 infrared LEDs - 120° wide-angle lens - IP67 waterproof - Operating temperature: -30°C ~ +50°C - Dimensions: 69 x 42 x 60 (BxWxD) - Operating voltage: 12V (via control box) - Weight 0,4 kg Description Length Camera set LCD screen, colour, for set 15506 Extra unheated camera, colour Extension cable 25 m Extension cable 20 m Holder for LCD screen Holder for LCD screen Control box for set 15506 Part number 15506 15524 15511 15520 15521 15516 15517 15531 EUROPEAN STANDARD SINCE 1963 271 SAFETY AND SIGNALING Reversing camera system LCD heated General: Set includes: 1 heated camera, LCD monitor, control unit, remote control, 20 metre cable and connectors. With E-Approval. The control box can be used for connection of TV and/or video/DVD to the LCD monitor and is also the converter for the LCD monitor. LCD-screen - Colour TFT LCD screen - Screen size 6.8” (effective) - Auto dimmer function - Audio/video in- and outputs - Built-in speaker with volume control - 3 camera-inputs (via control unit) - Remote control - Automatic rear-view display whenever reverse gear is engaged - On Screen Display - PAL camera-inputs - Operating voltage: 12V (via control box) - Operating voltage control box: 10V ~ 32V - Dimensions display: 195 x 140 x 28 (WxHxD) - Operating temperature: -10°C ~ +50°C Camera - Colour - Built-in microphone - Integrated heating - Automatic shutter - Automatic electronic iris - Electronic brightness adjustment - Ultra low light intenisty 0.5 lux - Mirror/normal image via external switch - 1/3” CCD Imaging sensor - 10G Shock resistance - 6 infrared LED’s - 120° Wide angle lens - IP67 waterproof - Operating temperature: -30°C ~ +50°C - Dimensions: 103 x 83 x 84 (WxHxD) - Operating voltage: 12V (distributed from display) - Weight 0,5 kg Description Length Camera set Additional heated camera colour only for LCD monitor 15526 Extension cable 25 m Extension cable 20 m Holder for LCD monitor Holder for LCD monitor 272 Part number 15508 15513 15520 15521 15516 15517 4 Reversing camera system Camera - Black/white - Automatic heating - Die-cast aluminium housing with sunshade - Built-in microphone - Automatic electronic iris - Electronic brightness adjustment - Ultra low light intenisty 0.5 lux - 1/3” CCD Imaging sensor - 10G Shock resistance - 6 infrared LED’s - 120° Wide angle lens - IP67 waterproof - Operating temperature: -30°C ~ +50°C - Dimensions: 69 x 42 x 60 (WxHxD) - Operating voltage: 12V (distributed from display) - Weight 0,4 kg Unlike the heated cameras 15512 and 15513, these cameras do not have a shutter to protect the lens when the camera is turned off. Description Heated camera colour for LCD display Part number 15529 Multi/control box. For connecting additional cameras. The set includes a control box and an LCD panel for the cabin. Power supply to the LCD panel via the control box. Only suitable for unheated cameras. Specifications - Audio/video in/outputs - 4 camera inputs with automatic scanning - Adjustable dwell time - Individual automatic triggering for 4 cameras - Individual volume controls - Mirror/normal image switchable - Auto dimmer function - Operating voltage 12V ~ 42V - Operating temperature: -15°C ~ +50°C Description Part number Multi/control box 15515 EUROPEAN STANDARD SINCE 1963 273 SAFETY AND SIGNALING Reversing camera system System socket Required for trailer application. Description System plug male System plug female Electro coil 7-core with 2 plugs attached 24V “N” Part number 15518 15519 05072 Extension cables Description Extension cable Extension cable 274 Length 15 m 30 m Part number 15530 15532 4 MARKER SIGNS Rear marking ECE 70 Complies with the European norm ECE 70. The yellow reflective material is Hight intensity Honeycomb, the red fluorescent material as well. Aluminium base plate. ATTENTION : DO NOT DRILL IN THE YELLOW MATERIAL. Also available with 15 mm wide mounting strips on both sides. These strips have 2 holes of 4 mm Ø. Also available as adhesive model. With E-Approval. Motorized vehicles, rear marking Description Without mounting strips Dimensions 282 x 130 mm Thickness Packing 1,5 mm set with 4 pcs Description Without mounting strips Without mounting strips Adhesive With mounting strips With mounting strips Dimensions Thickness 565 x 130 mm 1,8 mm 565 x 130 mm 1,0 mm 565 x 130 mm 595 x 130 mm 1,5 mm 595 x 130 mm 1,2 mm Description With mounting strips Without mounting strips Dimensions Thickness 1160 x 130 mm 1,5 mm 1130 x 130 mm 2,0 mm Packing set with 2 pcs set with 2 pcs set with 2 pcs set with 2 pcs set with 2 pcs Part number 08478 Part number 08482 08460 08461 08486 08464 Part number 08480 08484 Trailers and semitrailers, rear marking Description Without mounting strips Adhesive Dimensions Thickness Packing 283 x 195 mm 2,0 mm set with 4 pcs 283 x 195 mm set with 4 pcs Part number 08479 08477 Description Without mounting strips Without mounting strips Adhesive With mounting strips With mounting strips Dimensions Thickness 565 x 195 mm 1,8 mm 565 x 195 mm 1,0 mm 565 x 195 mm 595 x 195 mm 1,5 mm 595 x 195 mm 1,2 mm Part number 08492 08462 08463 08496 08465 Description With mounting strips Without mounting strips Adhesive Dimensions Thickness 1160 x 195 mm 1,5 mm 1130 x 195 mm 2,0 mm 1130 x 195 mm Packing set with 2 pcs set with 2 pcs set with 2 pcs set with 2 pcs set with 2 pcs Part number 08481 08494 08444 EUROPEAN STANDARD SINCE 1963 275 SAFETY AND SIGNALING Rear marking ECE 70-01 These marker signs comply with the new European norm 70-01. Aluminium base plate. DG Class 3. With E-Approval. Motorized vehicles, rear marking Description Without mounting strips Dimensions 285 x 130 mm Thickness Packing 1,2 mm set with 4 pcs Part number 08160 Description Without mounting strips Dimensions 565 x 130 mm Thickness Packing 1,2 mm set with 2 pcs Part number 08161 Description Without mounting strips Dimensions Thickness 1130 x 130 mm 1,2 mm Part number 08162 Trailers and semitrailers, rear marking E-Approval : E3 01 7002 Description Without mounting strips Dimensions 285 x 195 mm Thickness Packing 1,2 mm set with 4 pcs Part number 08170 Description Without mounting strips Adhesive Dimensions Thickness Packing 565 x 195 mm 1,2 mm set with 2 pcs 565 x 195 mm set with 2 pcs Part number 08171 08191 Description Without mounting strips Dimensions 1130 x 195 mm Part number 08172 276 Thickness 1,2 mm 4 Projecting wide or long load signs Projecting long load signs. 500 x 500 mm. Description Flat model, 2 holes Flat model Pressed structure Material Thickness PVC 3,0 mm Aluminium 2,0 mm Steel with supports 0,6 mm Part number 08500 08501 08503 Projecting wide load signs 280 x 560 mm. Description Material Projecting wide Aluminium load signs Thickness Packing 2,0 mm set with 2 pcs Part number 08601 Thickness Packing 2,0 mm set with 2 pcs Part number 08609 Thickness Packing 2,0 mm set with 2 pcs Part number 08603 2,0 mm 08604 140 x 800 mm. Application Horizontally or vertically Material Aluminium Extra wide or extra long projecting load signs 423 x 423 mm. Description Extra wide or extra long projecting load signs Material Aluminium Vertically or horizontally folding with stainless steel hinge. set with 2 pcs EUROPEAN STANDARD SINCE 1963 277 SAFETY AND SIGNALING Projecting wide or long load signs Type “BELGIUM” 500 x 500mm. Sign for frontside with white reflective and red fluorescent stripes. Sign for backside with red reflective and white stripes. Application Front Rear Material Aluminium Aluminium Thickness Packing 2,0 mm set with 2 pcs 2,0 mm set with 2 pcs Part number 08566 08567 Thickness Packing 1,0 mm set with 2 pcs Part number 08397 Type “FRANCE” 423 x 423 mm. Red and white reflective. Description Extra wide or extra long projecting load Material Aluminium Tail lift flags ~K 540 cerfication If the tail lift protrudes from the normal contours of the vehicle, a warning system is mandatory. The available options include reflective tail lift flags. Material is class 2 high intensity grade. Available with or without mounting section. ABG-approved by the German Kraftfahrt-Bundesamt according to ~ K 540 cerfication. Length Width : : 405 mm 255 mm Description Tail lift flag with aluminium mounting section, left Tail lift flag with aluminium mounting section, right Tail lift flags left Tail lift flags right Aluminium mounting section Tail lift flags with print On request available with customized print, from 50 sets. 278 Part number 08454 08455 08456 08457 08453 4 Container markings Adhesive. For marking containers that are placed on public roads. A minimum of two signs on each visible surface, preferably vertical. Class A tape (high intensity). Dimensions 705 x 141 mm 564 x 141 mm Packing set with 2 pcs set with 2 pcs Part number 08527 08526 Exceptional load UITZONDERLIJK VERVOER / CONVOI EXCEPTIONNEL Available with text on one side in Dutch or on both sides with Dutch/French text. 730 x 300 mm. Description Material Thickness Part number Text on one side Dutch Aluminium 2,0 mm 08510 Text on both sides Aluminium 2,0 mm 08512 Dutch/French UITZONDERLIJK VERVOER / CONVOI EXCEPTIONNEL Available with text on one side in Dutch or on both sides with Dutch/French text. 1175 x 200 mm. Description Material Thickness Part number Text on one side Dutch Aluminium 2,0 mm 08511 Text on both sides Aluminium 2,0 mm 08513 Dutch/French UITZONDERLIJK VERVOER Text on one side Dutch. Yellow background with black letters. 1175 x 200 mm. Description Material Thickness Text on one side Dutch Aluminium 2,0 mm Part number 08531 EUROPEAN STANDARD SINCE 1963 279 SAFETY AND SIGNALING Exceptional load UITZONDERLIJK VERVOER / CONVOI EXCEPTIONNEL Aluminium. Available with text on one side French or on both sides with Dutch/French text. 730 x 300 mm. Description Material Thickness Part number Text on one side French Aluminium 2,0 mm 08534 Yellow background with black letters Text on both sides Dutch/French Dutch: red background with black letters. French: yellow background with black letters Aluminium 2,0 mm 08564 UITZONDERLIJK VERVOER / CONVOI EXCEPTIONNEL Available with text on one side French or on both sides with Dutch/French text. 1175 x 200 mm. Description Text on one side French Yellow background with black letters Material Aluminium Thickness 2,0 mm Part number 08535 Text on both sides Dutch/French Aluminium 2,0 mm Dutch: red background with black letters French: Yellow background with black letters 08565 Text on both sides Dutch/French. Both sides yellow background with black letters 08568 Aluminium 2,0 mm UITZONDERLIJK VERVOER / CONVOI EXCEPTIONNEL Available with one-sided print in French or two-sided print in Dutch/French. 1200 x 400 mm. Diamond Grade. 280 Description Text on one side French Yellow background with black letters Material Aluminium Thickness 2,0 mm Part number 08381 Text on both sides Dutch/French Dutch: red background with black letters. French: yellow background with black letters Aluminium 2,0 mm 08382 4 Exceptional load UITZONDERLIJK VERVOER / CONVOI EXCEPTIONNEL Available with text on one side French or on both sides with Dutch/French text. 1900 x 250 mm. Diamond Grade Description Text on one side French Yellow background with black letters Text on one side French French. Yellow background with black letters. Text on both sides Dutch/French Dutch: red background with black letters. French: yellow background with black letters Material Adhesive Thickness 2,0 mm Part number 08383 Aluminium 2,0 mm 08384 Aluminium 2,0 mm 08385 UITZONDERLIJK VERVOER / TRANSPORT EXCEPTIONNEL / SCHWERTRANSPORT 1250 x 250 mm. According to specification of Belgian law. Description Material Uitzonderlijk vervoer. Aluminium Yellow background with black letters. Uitzonderlijk vervoer. Aluminium Orange background with black letters. Transport exceptionnel. Aluminium Yellow background with black letters. Transport exceptionnel. Aluminium Orange background with black letters. Schwertransport. Aluminium Yellow background with black letters Schwertransport. Aluminium Orange background with black letters. Thickness 2,0 mm Part number 08340 2,0 mm 08390 2,0 mm 08341 2,0 mm 08391 2,0 mm 08342 2,0 mm 08392 UITZONDERLIJK VERVOER / TRANSPORT EXCEPTIONNEL / SCHWERTRANSPORT One-sided print. 1250 x 250 mm. According to specification of Belgian law. Description Material “Transport exceptionnel” and “Uitzonderlijk vervoer”. Aluminium Yellow background with black letters “Transport exceptionnel” and “Uitzonderlijk vervoer”. Aluminium Orange background with black letters. “Uitzonderlijk vervoer” and “Schwertransport”. Aluminium Yellow background with black letters “Uitzonderlijk vervoer” and “Schwertransport”. Aluminium Orange background with black letters. “Transport exceptionnel” and “Schwertransport”. Aluminium Yellow background with black letters “Transport exceptionnel” and “Schwertransport”. Aluminium Orange background with black letters. Thickness 2,0 mm Part number 08343 2,0 mm 08393 2,0 mm 08344 2,0 mm 08394 2,0 mm 08345 2,0 mm 08395 EUROPEAN STANDARD SINCE 1963 281 SAFETY AND SIGNALING Exceptional load UITZONDERLIJK VERVOER / TRANSPORT EXCEPTIONNEL / SCHWERTRANSPORT One-sided print. 1250 x 400 mm. According to specification of Belgian law. Description “Transport exceptionnel”, “Uitzonderlijk vervoer” and “Schwertransport”. Yellow background with black letters “Transport exceptionnel”, “Uitzonderlijk vervoer” and “Schwertransport”. Orange background with black letters. Material Aluminium Thickness 2,0 mm Part number 08346 Aluminium 2,0 mm 08396 LZV European Mandatory marking rear of vehicle of LZV trailer/combination in other European countries than the Netherlands. Since November 2011, vehicles longer than 18.75 metres, with a maximum of 25.25 metres, must have a new type of marker sign. It should depict the type of lorry combination. Description Tractor unit - semi-trailer - central axle trailer Tractor unit - semi-trailer (With support point) - semi-trailer Lorry - trailer (length: > 18.75 m) Lorry - dolly - semi-trailer Lorry - semi-trailer - semi-trailer Material Aluminium Aluminium Thickness 2,0 mm 2,0 mm Type A B Part number 08180 08181 Aluminium Aluminium Aluminium 2,0 mm 2,0 mm 2,0 mm C D E 08182 08183 08184 LZV Netherlands Mandatory marking rear of vehicle of LZV trailer/combination in the Netherlands. Vehicles longer than 18.75 metres, with a maximum of 25.25 metres, must have a new type of marker sign. It should have the following description: ‘LET OP! EXTRA LANG’. This new regulation replaces the previous one, dating from November 2011. From the 1st of January 2014 all LZV’s should have this sign. Description LZV sign, 2013 LZV sign, 2013 set LZV sign, 2013 left LZV sign, 2013 right 282 Dimensions Material 1130x196x2 mm Aluminium 565x196x2 mm Aluminium 565x196x2 mm Aluminium 565x196x2 mm Aluminium Thickness 2,0 mm 2,0 mm 2,0 mm 2,0 mm Part number 08194 08195 08196 08197 4 Exceptional load LZV sign holder Holder with hinge point. Colour Blank Black sprayed Rough Black Dimensions Material 1222x210 mm Stainless steel 1222x210 mm Stainless steel 617x206 mm Stainless steel 617x206 mm Stainless steel Thickness 2,0 mm 2,0 mm 2,0 mm 2,0 mm Part number 08187 08188 08198 08199 Packing set with 2 pcs Part number 00355 LONG VEHICLE 525 x 250 mm. Complies with BSAU 152 norm.. Description Long Vehicle Material Aluminium Thickness 0,8 mm BRED LAST 1160 x 200 mm. Black letters on white, reflecting background. With red rim. Description Bred last Material Aluminium Thickness 2,0 mm Part number 08619 One-sided print French. 1900 x 250 mm. Yellow/black. Omscrhijving Material Thickness Convoi Agricole Aluminium 1,0 mm Part number 08398 CONVOI AGRICOLE “FRANCE” EUROPEAN STANDARD SINCE 1963 283 SAFETY AND SIGNALING Slow moving vehicles Slow moving vehicles With “E”-approval and two pre-drilled mounting holes. Required on all vehicles slower than 25 km/h. Available with red fluorescent or yellow retroreflecting center part. Height : 355 mm Description Thickness E-approved Red center part 2,0 mm  Red center part 1,0 mm  Adhesive, red center part 1,2 mm Adhesive, red center part 1,0 mm Adhesive, yellow center part 2,0 mm Adhesive, yellow center part Adhesive, yellow center part Part number 08505 08605 08613 08417 08416 08553 08554 Transport Internationaux Routiers T.I.R. sign (folding) Silk-screen printed model. With stainless-steel piano hinge. Blue background, white lettering. 400 x 250 mm. Description Material Thickness T.I.R. sign, complete with Aluminium 2,0 mm extra swivel lock Swivel lock (loose) old version Aluminium Swivel lock (loose) new version Aluminium Part number 08543 08546 08201 Screen printed version. Blue background, white lettering. 400 x 250 mm. Description T.I.R. sign Thickness 1,0 mm Part number 08548 Thickness Packing 1,0 mm set with 2 pcs Part number 08541 Remaining VEEVERVOER Red surface with white letters, 615 x 105 mm. Description Veevervoer Material Aluminium VLEESVERVOER Yellow background With black letters. 760 x 115 mm. Description Vleesvervoer 284 Material Aluminium Thickness 2,0 mm Part number 08544 4 Remaining PAS OP! ZWENKT UIT Pressed model. Aluminium. Red background With white letters. 900 x 210 mm. Description Pas op! zwengt uit Material Aluminium Thickness 1,0 mm Part number 08545 Werkverkeer In conformance with guidelines for work under construction on motorways, publication 1996A. Black letters on yellow, reflecting background. Available in Engineering Grade or High Intensity. 1500 x 300 mm. Description Engineering grade Sticker, Engineering grade High Intensity ECE70 Sticker, High Intensity ECE70 Material Thickness Aluminium 2,0 mm Adhesive Aluminium 2,0 mm Adhesive Part number 08600 08600ST 08539 08537 Various model. Black letters on yellow, reflecting background. Description Material Sign werkverkeer Aluminium Sticker Magnetic Plastic with 2 suction pads Part number 48633 48632 48631 48630 Stop sign on pole White-reflective with red edges. Approved for Belgian special transport regulations. 2 of these are mandatory. Description Stop sign on pole Stop sign on pole Diameter 15 cm 20 cm Part number 83034 83033 Diameter 90 mm 150 mm Part number 08988 08989 Sticker ‘No smoking’ Description No smoking No smoking EUROPEAN STANDARD SINCE 1963 285 SAFETY AND SIGNALING Speed indications Type “NETHERLANDS” White with black letters and numbers and red border. KM 16 25 40 50 60 70 80 90 100 Material Adhesive Adhesive Adhesive Adhesive Adhesive Adhesive Adhesive Adhesive Adhesive Diameter 240 mm 240 mm 240 mm 240 mm 240 mm 240 mm 240 mm 240 mm 240 mm Part number 48600 48601 48602 48603 48604 48605 48606 48607 48608 KM 16 25 40 50 70 80 90 100 Material Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Diameter 240 mm 240 mm 240 mm 240 mm 240 mm 240 mm 240 mm 240 mm Part number 48561 08542 48562 48563 48565 48566 48567 48568 Thickness 1,0 mm 1,0 mm 1,0 mm 1,0 mm 1,0 mm 1,0 mm 1,0 mm 1,0 mm Type “BELGIUM” White with black letters and numbers and red border. 286 KM 40 60 70 80 90 Material Adhesive Adhesive Adhesive Adhesive Adhesive Diameter 210 mm 210 mm 210 mm 210 mm 210 mm Part number 48620 48621 48622 48623 48624 KM 40 60 70 80 90 Material Aluminium Aluminium Aluminium Aluminium Aluminium Diameter 210 mm 210 mm 210 mm 210 mm 210 mm Part number 48570 48571 48572 48573 48574 Thickness 1,0 mm 1,0 mm 1,0 mm 1,0 mm 1,0 mm 4 Speed indicators Type FRANCE White with black letters and numbers. KM 60 70 80 90 Material Adhesive Adhesive Adhesive Adhesive Diameter 200 mm 200 mm 200 mm 200 mm Part number 48615 48618 48616 48617 Type GERMANY White with black letters and numbers and black border. KM 25 40 Material Aluminium Aluminium Diameter 200 mm 200 mm Thickness 1,0 mm 1,0 mm Part number 48582 48583 Environment A-sign Mandatory for transporting all kinds of waste in and to Germany. White-reflective with black lettering. Available as fixed, horizontally or vertically folding models. Comes with two metal hinges. Thickness 1.5 mm. 300 x 400 mm. Description A-sign A-sign vertically folding A-sign horizontally folding Swivel lock old version Swivel lock new version Material Thickness Aluminium 1,0 mm Aluminium 1,0 mm Aluminium 1,0 mm Aluminium Aluminium Part number 08610 08611 08612 08546 08201 EUROPEAN STANDARD SINCE 1963 287 SAFETY AND SIGNALING Environment Low noise level L-symbol “Lärmarm”, (low noise level). In combination with a declaration of the manufacturer of the vehicle, this sign permits truck/trailer transport at night in Austria. Green background with white letter Description Low noise level Low noise level Material Metal Adhesive Diameter Thickness 210 mm 1,0 mm 210 mm 1,0 mm Part number 08631 08630 Environmental friendly U-symbol “Umweltfreundlich” (environmental friendly). Applicable in Austria. In combination with CEMT document, regarding emission of harmful substances. Green background with white letter. Description Environmental friendly Environmental friendly Material Metal Adhesive Diameter 210 mm 210 mm Thickness 1,0 mm 1,0 mm Part number 08633 08632 Country stickers Oval, 175 x 115 mm. Description Netherlands (NL) Denmark (DK) United Kingdom (GB) Belgium (B) Germany (D) Norway (N) Russia (RUS) Poland (PL) Part number 08559 08620 08621 08622 08623 08624 08627 08628 EU sticker EU sticker, oval, 117 x 110 mm. Description EU sticker 288 Part number 08626 4 Hazardous material signs Hazardous material signs Orange reflecting center area with or without 1.5 cm wide black border. 300 x 400 mm. Description With black edge for direct mounting With black edge for direct mounting Without black edge for mounting in plate holder Without black edge for mounting in plate holder Material Aluminium Galvanised steel Aluminium Galvanised steel Thickness 1,0 mm 0,8 mm 1,0 mm 0,8 mm Part number 08502 08602 08506 08606 Plate holders Available for 1 or 3 signs. Description Colour Plate holder for 1 sign Black painted Plate holder for 3 signs Black painted Cover sleeve for ADR & hazardous material sign. Made of Class 2 material. Material Dimensions Stainless steel Stainless steel 300 x 400 mm Part number 08550 08557 08354 Hazardous material signs, folding 300 x 400 mm. Description Material Thickness Vertically folding with extra swivel lock. Aluminium 2,0 mm Heavy Duty. Stainless-steel piano hinge. Vertically folding with extra swivel lock. Aluminium 1,2 mm Two metal hinges. Horizontally folding with extra swivel lock. Aluminium 1,2 mm Two metal hinges. Horizontally folding with extra swivel lock. Aluminium 2,0 mm Heavy Duty. Stainless-steel piano hinge. Swivel lock (loose) old version Swivel lock (loose) new version Part number 08507 08607 08608 08562 08546 08201 Legally permitted in locations where the vehicle does not have room for a 300 x 400 mm sign. 120 x 300 mm. Description Material Thickness Vertically folding with extra swivel lock. Aluminium 2,0 mm Heavy Duty. Stainless-steel piano hinge. Swivel lock (loose) old version Swivel lock (loose) new version Part number 08614 08546 08201 EUROPEAN STANDARD SINCE 1963 289 SAFETY AND SIGNALING Hazardous materials code sign Heavy Duty Description Material Hazard code sign complete Stainless steel Seperate holder for numbers Stainless steel Number set 27 pieces Stainless steel Cover sleeve for ADR & hazardous material sign 300x400 Packing Set Piece Set Piece Part number 08359 08358 08352 08354 Description Material Hazard code sign complete Stainless steel Seperate holder for numbers Stainless steel Holder for 08353 Stainless steel Number set 27 pieces Stainless steel Cover sleeve for ADR & hazardous material sign 300x400 Packing Set Piece Piece Set Piece Part number 08355 08353 08351 08352 08354 Description Number set 27 pieces 0 individual 1 individual 2 individual 3 individual 4 individual 5 individual 6 individual 7 individual 8 individual 9 individual X individual Packing Set Piece Piece Piece Piece Piece Piece Piece Piece Piece Piece Piece Part number 08352 08360 08361 08362 08363 08364 08365 08366 08367 08368 08366 08369 Hazardous materials code sign standard Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Hazardous material sign with code Galvanised/painted steel. Pressed version. 1 mm thick. 300 x 400 mm. Code Part number 20/1046 08250 23/1077 08267 22/1951 08234 22/1963 08249 22/1977 08236 22/2187 08245 225/1073 08242 23/1049 08235 23/1965 08219 23/1969 08208 30/1202 08514 30/1202 & 33/1203 08223 30/1223 08515 30/1863 08210 30/1993 08253 30/2265 08257 290 4 Hazardous material sign with code Code Part number 30/3256 08226 30/3295 08231 32/1993 08246 33/1170 08275 33/120 08516 33/1263 08265 33/1265 08247 33/1268 08211 33/1863 08212 33/1993 08244 33/3295 08224 33/3475 08260 331/1223 08220 336/1230 08256 336/1992 08258 338/2924 08273 368/3286 08259 40/1325 08243 40/1350 08266 40/1373 08240 40/3175 08239 42/1364 08248 423/3170 08241 43/3170 08221 43/3208 08222 462/1408 08213 50/1486 08251 50/2067 08225 50/2070 08215 60/2291 08271 60/3288 08227 70/2913 08261 70/2915 08262 70/2916 08268 70/2919 08270 70/3321 08263 70/3322 08269 80/1759 08274 80/1779 08218 80/1789 08217 80/1824 08229 80/2582 08254 80/2794 08233 80/3260 08238 80/3263 08264 80/3264 08228 80/3265 08272 90/2590 08214 90/3077 08255 90/3082 08517 99/1257 08252 99/3257 08230 125/1073 08237 X99/3257 08232 Stainless-steel mounting support 08552 EUROPEAN STANDARD SINCE 1963 291 SAFETY AND SIGNALING ADR ITEMS ADR item Adhesive safety signs for use at transport of hazardous material. 300 x 300 mm. Class 1 ADR label 1.1 Description Explosive material Part number 48510 ADR label 1.4 Description Part number Explosive material 48515 ADR label 1.5 Description Part number Explosive material 48516 ADR label 1.6 Description Part number Explosive material 48517 Class 2 ADR label 2.1 Description Part number Combustible liquids 48520 ADR label 2.2 Description Part number Non-combustible/non-toxic gases 48521 ADR label 2.3 Description Part number Toxic gases 48522 292 4 ADR item Class 3 ADR label 3 Description Part number Combustible liquids 48525 Class 4 ADR label 4.1 Description Combustible solid material Part number 48528 ADR label 4.2 Description Part number Possible self-igniting material 48529 ADR label 4.3 Description Part number Combustible material, in case of water contact 48530 Class 5 ADR label 5.1 Description Part number Oxydising material 48533 ADR label 5.2 Description Part number Organic peroxides 48534 EUROPEAN STANDARD SINCE 1963 293 SAFETY AND SIGNALING ADR item Class 6 ADR label 6.1 Description Part number Toxic material 48537 ADR label 6.2 Description Artikelnummer Infectious material 48538 Class 7 ADR label 7A Description Part number Radioactive material 48541 ADR label 7B Description Part number Radioactive material 48542 ADR label 7C Description Radioactive material Part number 48543 ADR label 7E Description Part number Fissionable material 48545 Class 8 ADR label 8 Description Corrosive material 294 Part number 48549 4 ADR item Class 9 ADR label 9 Description Part number Various materials and objects 48552 Description Part number Environmentally hazardous substances 48557 Description Part number Transport above 20° c 48550 Description Part number Marine Pollutant 48560 ADR sign, limited contents Description Dimensions Part number Sign ADR 250 x 250 mm 48509 Indication for limited amount of hazardous substances. Aluminium base plate, 1 mm, with swivel lock. Description Dimensions Part number Vertically folding 250 x 250 mm 48508 EUROPEAN STANDARD SINCE 1963 295 SAFETY AND SIGNALING ADR item Backplate Aluminium. For mounting of ADR labels. Description Dimensions Backplate 300 x 300 mm Thickness 2,0 mm Part number 48501 Plate holder Application Material For ADR labels Stainless steel Galvanised Part number 48503 48504 Mounting support Application Material For plate holder Stainless steel Part number 48505 Sticker Round Application Colour For i.a. road tankers, class 2 Red Diameter 57 mm Packing set with 6 pcs Part number 08418 Dimensions 52 x 30 mm Packing set with 6 pcs Part number 08419 Rectangular Application Colour For i.a. road tankers, class 2 Red VLG-ADR Description VLG-ADR Dimensions 100 x 40 mm Part number 83011 www.medisafe-products.nl 296 4 Safety goggles Anti-condensation. EN 166. Description Material Safety goggles Flexible with acetate glass Part number 83012 Gloves neoprene Suitable for handling chemicals such as acids, fats, solvents and oils. Shank length 30 cm. EN 388/374 Description Size Gloves neoprene 10 Part number 83013 Boots, acid resistant Description Size Boots 44 Part number 83032 Half mask Class 1 ABEK, made from anti-allergen thermoplastic rubber. Fitted with double filters, storability filters appr. 4.5 to 5 years. Description Packing Half mask incl. filters Spare filter ABEK1 set with 2 pcs Part number 83014 83009 Eye wash bottle Bottle 500 ml. NaCL 0,9% sterile 0344. With eye wash. Storability approx. 3 years. Description Part number Eye wash bottle 83015 EUROPEAN STANDARD SINCE 1963 297 SAFETY AND SIGNALING Overall chemical-resistant Dustproof. Offers protection against dangerous materials in powder form, drops, mist, and direct sprays with liquid chemicals. Equipped with hood and elastic in sleeves and trouser-legs. Yellow, category 3. Description Colour Type Overall Yellow 4, 5, 6 Part number 83016 Safety vest Vest with reflecting bands. For use in Europe. EN 471 Description Colour Safety vest Orange Part number 83018 Torch Meets the conditions for explosive-resistant lighting equipment. Supplied with 2 penlite AA-batteries. ATEX approval EEX cat. ll zone 1. Description Torch Part number 83008 Absorption mats Can be split into 10 pieces using perforation. Suitable for absorbing oil products, bases, acids, solvents, antifreeze and aggressive chemicals. After use, the mats can be cleaned and reused. Absorption ability: 2.5 l Description Dimensions Absorption mats 52 x 41 cm Packing set with 5 pcs Part number 83020 Material Plastic Part number 83021 Shovel Description Shovel 298 Dimensions 41 x 30 cm 4 Hand brush Description Material Hand brush Wood with coconut Part number 83022 First aid box S-3 Meets all norms for road transport within Europe. The content meets the specific Dutch norms and DIN 13164 obligatory in Germany. Description Part number Without wall holder 83029 With wall holder 83030 Bus The first aid box complies with the requirements for the professional transport of passengers. Description With wall holder Part number 83031 Sewer cover tarpaulin Set with 2 cover tarpaulins 1.5 x 1.5 m. Chemical-resistant plastic 100 mU PE. For covering street swirls and sewer catch pit. Officially not obligaled in ADR kit. Description Sewer cover tarpaulin Dimensions 1,5 x 1,5 m Packing set with 2 pcs Part number 83023 EUROPEAN STANDARD SINCE 1963 299 SAFETY AND SIGNALING Cones Colour Material Orange with Soft PVC white reflecting band Dimensions 30 cm Part number 83024 Dimensions 50 cm Part number 83025 Width 7 cm 7 cm 7 cm Part number 08458 83026 83027 Colour Material Orange with 2 Soft PVC white reflecting bands Warning tape Colour Material Red/white PVC Red/white PVC Yellow/black PVC Packing 200 m 500 m 500 m Dispenser box for warning tape For easily rolling out and cutting off warning tape. Description Dispenser Partnumber 83028 Warning triangle Solid construction with stand. Complies with European norm no. 27. Comes in container. E-Approval : E8 27R 03 9809 - (08599) Description Warning triangle 300 Part number 08599 4 MARKING TAPE Marking tape Non-reflecting. Used to mark side guards. Description Material Marking tape Adhesive Marking tape Adhesive Dimensions 1000 x 92 mm 1000 x 45 mm Part number 08528 08558 Dimensions 10 mm x 2,0 m 10 mm x 2,0 m 50 mm x 11,5 m 50 mm x 11,5 m 50 mm x 11,5 m 50 mm x 11,5 m Part number 08555 08556 08731 08732 08733 08734 Dimensions 50 mm x 11,5 m 50 mm x 11,5 m 50 mm x 11,5 m 50 mm x 11,5 m Part number 08731 08732 08733 08734 PVC universal warning tape Available as reflective and non-reflective tape. Application Right Left Right Left Right Left Colour Material Red/white Adhesive Red/white Adhesive Red/white Adhesive Red/white Adhesive Red/white Adhesive, reflective Red/white Adhesive, reflective Available as reflective and non-reflective tape. Not suitable for vehicle marking. Application Right Left Right Left Colour Material Yellow/black Adhesive Yellow/black Adhesive Yellow/black Adhesive, reflective Yellow/black Adhesive, reflective EUROPEAN STANDARD SINCE 1963 301 SAFETY AND SIGNALING REFLECTORS Reflectors round Adhesive reflectors E-Approval E-Approval E-Approval E-Approval E-Approval E-Approval : E13 0485 - (08570) : E13 0485 - (08571) : E13 0485 - (08572) : E13 0493 - (08587) : E13 0493 - (08588) : E1 0231330 R3 - (08589) Colour Material Orange Plastic Red Plastic White Plastic Orange Plastic Red Plastic White Plastic Dimensions Ø 60 mm 60 mm 60 mm 80 mm 80 mm 80 mm Part number 08570 08571 08572 08587 08588 08589 Dimensions Ø 62 mm 62 mm 62 mm 82 mm 82 mm 82 mm Part number 08593 08594 08595 08596 08597 08598 Mountable reflector Mounting hole : 6 mm Ø E-Approval : E13 0490 - (08593) E-Approval : E13 0490 - (08594) E-Approval : E13 0990 - (08595) E-Approval : E1 0231329 R3 - (08596) E-Approval : E13 0492 - (08597) E-Approval : E1 0231329 R3 - (08598) Colour Material Orange Plastic Red Plastic White Plastic Orange Plastic Red Plastic White Plastic 302 4 Reflectors rectangular Adhesive reflectors E-Approval E-Approval E-Approval E-Approval E-Approval E-Approval E-Approval E-Approval E-Approval : E13 0486 - (08578) : E13 0486 - (08579) : E1 0231374 - (08580) : E1 0231379 - (08581) : E1 0231378 - (08582) : E1 0231378 - (08583) : E13 0487 - (08590) : E1 0231375 - (08591) : E1 0231375 - (08592) Colour Material Orange Plastic Orange Plastic Red Plastic White Plastic Orange Plastic Red Plastic White Plastic Orange Plastic Red Plastic Dimensions 56 x 39 mm 94 x 44 mm 94 x 44 mm 94 x 44 mm 105 x 55 mm 105 x 55 mm 105 x 55 mm 122 x 33 mm 122 x 33 mm Part number 08581 08578 08579 08580 08590 08591 08592 08582 08583 Adhesive/mountable reflectors Length : Width : Centre-to-centre distance : Mounting holes : 90 mm 40 mm 70 mm Ø 4 mm E-Approval : E13 0491 - (08575) E-Approval : E13 0491 - (08576) E-Approval : E13 0491 - (08577) Colour Material Orange Plastic Red Plastic White Plastic Part number 08575 08576 08577 Mountable reflector Length : Width : Centre-to-centre distance : Mounting holes : 127 mm 51 mm 114 mm Ø 4 mm E-Approval : E2 0254099 - (00995) Colour Material Orange Plastic Part number 00995 EUROPEAN STANDARD SINCE 1963 303 SAFETY AND SIGNALING Reflector triangle Triangle reflector Centre-to-centre distance : Mounting holes : 70 mm Ø 5 mm E-Approval : E13 0488 R3 - (06110) Colour Material Red Plastic 304 Part number 06110