Preview only show first 10 pages with watermark. For full document please download

4 Way Sounder Controller Unit Manual

   EMBED

Share

Transcript

Installation Instructions for: 4 Way Sounder Controller MPU424 / FXN515 Installation 1. Remove the cover of the unit. 2. Fit the back-plate in position and pass the wires into it taking care not to damage the circuit board. 3. Connect the unit according to the diagram below. Notes: No addressing of the interface is required. See control panel operation for details. This unit requires a permanent 230V AC supply. Standard Connections 6k8 6k8 6k8 6k8 ANALOGUE ADDRESSABLE LOOP 230V AC MAINS FIRE RELAY L N E 230V AC MAINS E + - E 1 + - 2 E + - 3 E + - N/O C N/C 4 E - + E + BATT - Notes: 1. Only connect cable screen to its adjacent earth terminal. 2. The end of line resistors must always be fitted, even if the sounder circuits are unused. Cooper Lighting and Security Ltd. Menvier – JSB Division Wheatley Hall Road, Doncaster, South Yorkshire, DN2 4NB, United Kingdom Sales General Export Tel: +44 (0)1302 – 303303 Tel: +44 (0)1302 – 321541 Tel: +44 1302 - 303250 Fax:+44 (0)1302 – 367155 Fax:+44 (0)1302 – 303220 Fax:+44 1302 - 303251 Email: [email protected] [email protected] [email protected] .PINSTMPU424 + IN OUT SOUNDER CIRCUIT - + BACK UP BATTERY - Specifications Loop Load Quiescent Current Min 230V Mains Supply Supply Voltage Current Consumption Power Consumption 230 120 Sounder Outputs Sounder Load Per Channel Sounder Load Total End Of Line Resistor 6.8±5% Fire Relay Contact Rating Switching Voltage Switching Current Switching Power Environmental Operating Temperature Humidity (Non Condensing) Standards EN54 : Pt2 & 4 BS5839 : Pt1 (Installation) Compatibility Suitable for use with Cooper Analogue Addressable Fire Systems Physical Battery Backup Dimensions Weight Ingress Protection 2 x 12V, 4Ah 300 x 300 x 74 (mm) 5.4kg IP40 Nom 310 24 -10 Max 0.5 Units µA V AC A W 0.8 3.2 A A kΩ 30 1 30 V DC A W +45 95 °C %rh