Transcript
402-1008 April 22nd, 2014 Rev D3
MPO Cable Assembly Configure to Order Model
Scope: This specification defines the cable assemblies that can be created by the MP catalog configuration scheme for the creation of 12 fiber ferrule based MPO cable assemblies from 12 to 144 fibers total. All assemblies are designed to the requirements of TIA 568-C.3.
Figure 1: 12 fiber MPO to MPO assembly on 3mm interconnect cable.
Figure 2: MPO to MPO assembly on 24 fiber 3mm interconnect zipcord cable (12 fibers per leg).
Figure 3: 12 fiber MPO to MPO assembly on 12 fiber backbone cable with 1x12 fiber 3mm interconnect subunit.
Figure 4: MPO to LC, SC, ST, FC, or MT-RJ. Fiber counts from 12 to 144 fibers.
Packaging: All assemblies will come with protective covers over the MPO connectors. Assemblies made with backbone cable will come with a pulling sock over the left side MPO connector(s) and a protective cover over the right side connectors. The pulling sock will cover the entire breakout area up to the larger diameter backbone cable. The pulling sock diameter for assemblies with up to 6 MPO connectors is 1.125 inch (28.5mm), 8 or 12 MPO assembly pulling socks increase to 1.25 inch (38mm). 12 fiber interconnect assemblies up to 30 meters in length will come in a bag. 24 fiber interconnect zipcord assemblies up to 10 meters in length will come in a bag. All other assemblies will come on a reel.
© 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. TE Connectivity, and TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. This specification is subject to change without notice.
1 of 16
402-1008 M
P
X
-
1
X
X
X
X
X
X
X
2
3
4
5
6
7
8
Position 1: Performance/Polarity
X
X 9-11
Position 4: Side B Connector (continued)
A
Polarity A (Straight Through) with Standard Performance
T
Polarity A (Straight Through) with Optimate Performance
S
B
Polarity B (Reversed) with Standard Performance
F
X
X
-
12
X
X
13-14 Position 7: Fiber Type
1
62.5/125µm OM1
SC Duplex
2
50/125µm OM2
T
ST Duplex
3
OM3
Polarity B (Reversed) with Optimate Performance
F
FC
4
OM4
C
Polarity C (Pairs Flipped) with Standard Performance
M
MTRJ Plug without pins
5
OS2
E
Polarity C (Pairs Flipped) with Optimate Performance
W
MTRJ Plug with pins
6
SC APC Duplex (Single-mode only)
Position 2: Side A Connector Type N
12 Fiber MPO without Pins
P
12 Fiber MPO with Pins
C
12 Fiber MPO Secure without Pins
E
12 Fiber MPO Secure with Pins
Position 3: Side A Color/Keying C
Standard Connector
B
Blue
N
Orange
G
Green
W
Brown
S
Slate
R
Red
Y
Yellow
V
Violet
P
Rose
A
Aqua
7
LC APC Duplex (Single-mode only)
8
LC Secure Duplex
9
MT-RJ Secure Duplex
Position 5: Side B Color/Keying
Position 8: Cable Jacket Color 0
Industry Standard Color (by Fiber Type)
B
Blue
N
Orange
G
Green
W
Brown
C
Standard Connector
S
Slate
0
None (Pigtail)
R
Red
B
Blue
K
Black
N
Orange
Y
Yellow
G
Green
V
Violet
W
Brown
P
Rose
S
Slate
A
Aqua
R
Red
Y
Yellow
V
Violet
P
Rose
A
Aqua
Position 9-11: Assembly Length XXX
Assembly Length (Must Be 3 Digits)
Position 12: Unit of Measure F
Feet
M
Meters
Position 6: Cable Type Position 4: Side B Connector N
12 Fiber MPO without Pins
P
12 Fiber MPO with Pins
C
12 Fiber MPO Secure without Pins
E
12 Fiber MPO Secure with Pins
0
None (Pigtail)
L
LC Duplex Table Continued Above….
REV D3
J
12 Fiber 3mm Interconnect, OFNP
Z
24 Fiber 3mm Interconnect Zipcord, OFNP
Position 13: Breakout Length A
TFP
30.5 inches (77.5 cm)
1
12 Fiber Backbone, 1x12F, with 3mm Interconnect Subunit, OFNP
B
NFG
13.75 inches (34.9 cm)
D
24 Fiber Backbone, 2x12F, with 3mm Interconnect Subunits, OFNP
C
18 Inches
18 Inches (45.7 cm)
3
36 Fiber Backbone, 3x12F, with 3mm Interconnect Subunits, OFNP
F
RMG
25 Inches (63.5 cm)
4
48 Fiber Backbone, 4x12F, with 3mm Interconnect Subunits, OFNP
N
No Breakout or Pigtail
N/A
7
72 Fiber Backbone, 6x12F, with 3mm Interconnect Subunits, OFNP
S
Standard
36 Inches (91.4 cm)
9
96 Fiber Backbone, 8x12F, with 3mm Interconnect Subunits, OFNP
U
79 Inches
79 Inches (200.6 cm)
H
144 Fiber Backbone, 12x12F, with 3mm Interconnect Subunits, OFNP
XX
Custom. (From 10 to 99.)
XX
2 of 16
402-1008 MP
X
-
1
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Position 1 (Table 1 of 2) Performance/Polarity for MPO to MPO See Assembly Performance tables on page 5 for assembly performance specifications.
Catalog Number
Description Polarity A (Straight Through)
A
with Standard Performance Polarity A (Straight Through)
T
with Optimate Performance Polarity B (Reversed)
B
with Standard Performance Polarity B (Reversed)
F
with Optimate Performance Polarity C (Pairs Flipped)
C
with Standard Performance Polarity C (Pairs Flipped)
E
REV D3
with Optimate Performance
Connector A Fiber Number 1 2 3 4 5 6 7 8 9 10 11 12 Connector A Fiber Number 1 2 3 4 5 6 7 8 9 10 11 12 Connector A Fiber Number 1 2 3 4 5 6 7 8 9 10 11 12
Fiber Color BL OR GR BR SL WH RD BK YL VI RS AQ Fiber Color BL OR GR BR SL WH RD BK YL VI RS AQ Fiber Color BL OR GR BR SL WH RD BK YL VI RS AQ
Connector B Fiber Number 1 2 3 4 5 6 7 8 9 10 11 12 Connector B Fiber Number 12 11 10 9 8 7 6 5 4 3 2 1 Connector B Fiber Number 2 1 4 3 6 5 8 7 10 9 12 11
3 of 16
402-1008
Position 1 (Table 2 of 2) Performance/Polarity for MPO to MT-RJ, LC, SC, ST, or FC Polarity A must be chosen when connector B is a simplex connector (FC, ST, LC/APC, or SC/APC). Optimate performance can only be chosen when connector B is MPO, LC, or SC.
Catalog Number
Description Connector B Connector A Fiber Number
Fiber Color
with Optimate Performance
1 2 3 4 5 6 7 8 9 10 11 12
BL OR GR BR SL WH RD BK YL VI RS AQ
Polarity C
Connector A Fiber Number
Fiber Color
1 2 3 4 5 6 7 8 9 10 11 12
BL OR GR BR SL WH RD BK YL VI RS AQ
Polarity A A
(Straight Through)
with Standard Performance Polarity A
T
(Straight Through)
Fiber Number 1 2 3 4 5 6 7 8 9 10 11 12
Pair
Duplex Position A B A B A B A B A B A B
1 2 3 4 5 6 Connector B
(Pairs Flipped)
C
with Standard Performance
Polarity C (Pairs Flipped)
E
with Optimate Performance
REV D3
Fiber Number 2 1 4 3 6 5 8 7 10 9 12 11
Pair 1 2 3 4 5 6
Duplex Position B A B A B A B A B A B A
4 of 16
402-1008
Assembly Performance: Maximum cable assembly loss can be calculated by adding the maximum loss of the connectors on both ends and the cable between. The necessary values are in the tables below. Single-mode OS2 LC, SC, MT-RJ LC APC ST, FC
12F MPO Insertion Loss (dB Maximum)
Return Loss (dB Minimum)
Insertion Loss (dB Maximum)
Return Loss (dB Minimum)
1310nm 1550nm 1310nm 1550nm
SC APC, FC APC
0.50
0.50
0.20
0.30
0.30
0.50 55 55
0.50 26 26
0.20 65 65
0.30 65 65
0.30 65 65
LC, SC, ST, and FC
Multimode LC, SC OPTIMATE
MT-RJ
OM1, OM2, OM3, OM4
OM3, OM4
OM1, OM2, OM3, OM4
0.35
0.15
0.50
0.35 20 20
0.15 35 35
0.50 20 20
850nm 1300nm 850nm 1300nm
Multimode 12 Fiber MPO Insertion Loss (dB Maximum)
Return Loss (dB Minimum)
62.5/125 OM1
50/125 OM2, OM3, OM4
OPTIMATE OM3, OM4
0.50
0.50
0.35
0.50 20 20
0.50 23 23
28 -
850nm 1300nm 850nm 1300nm
Maximum Cable Attenuation 62.5/125 µm
Bend Insensitive
OM1
50/125 µm
(850nm/1300nm)
OM2 (850nm/1300nm)
Cable Maximum Attenuation (These are the attenuation values for the cable only).
REV D3
3.5/1.2 dB/km
3.5/1.5 dB/km
Bend Insensitive
Bend Insensitive
OM3
OM4
(850nm/1300nm)
(850nm/1300nm)
3.0/1.0 dB/km
3.0/1.0 dB/km
Bend Insensitive Single-mode
OS2 (1310nm/1550nm)
0.4/0.3dB/km
5 of 16
402-1008 MP
X 1
-
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Position 2 Connector A Type TE Connectivity MPO cassettes are made with pins. Therefore cables for use with MPO cassettes should be without pins.
Catalog Number
Description
12 Fiber MPO without Pins N
TE Connectivity MPO cassettes are made with pins. Therefore cables for use with MPO cassettes should be without pins.
Example: Standard performance MPO with OM3 or OM4 fiber.
P
12 Fiber MPO with Pins
Example: Standard performance MPO with OM3 or OM4 fiber.
Secure Connectors (Use Position 3 to Select Secure Connector Color)
C
12 Fiber MPO SECURE without Pins
Example: Red MPO SECURE with OM3 or OM4 fiber.
E
12 Fiber MPO SECURE with Pins
Example: Red MPO SECURE with OM3 or OM4 fiber.
REV D3
6 of 16
402-1008 MP
X
-
1
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Position 3 Connector A Color/Keying Housing Colors by Fiber Type/Performance
Catalog Number
Description Inner Housing Color/Outer Housing (Slider) Color OM1
OM2
OM3/OM4
Single-mode
OPTIMATE
Inner/Outer
Inner/Outer
Inner/Outer
Inner/Outer
Inner/Outer
Black/Beige
Black/Black
Black/Aqua
Black/Green
Black/Mustard
Standard Connector Use this value for standard connectors (connectors that are not keyed for SECURE adapters).
C
SECURE Connector Colors/Keying MPO SECURE plugs are designed for use with MPO SECURE cassettes and will only mate with like colored adapters.
B N G W S R Y V P A
REV D3
Blue Orange Green Brown Slate Red Yellow Violet Rose Aqua
Blue/Beige
Blue/Black
Blue/Aqua
Blue/Green
Blue/Mustard
Orange/Beige
Orange/Black
Orange/Aqua
Orange/Green
Orange/Mustard
Green/Beige
Green/ Black
Green/Aqua
Green/Green
Green/Mustard
Brown/Beige
Brown/ Black
Brown/Aqua
Brown/Green
Brown/Mustard
Slate/Beige
Slate/Black
Slate/Aqua
Slate/Green
Slate/Mustard
Red/Beige
Red/Black
Red/Aqua
Red/Green
Red/Mustard
Yellow/Beige
Yellow/Black
Yellow/Aqua
Yellow/Green
Yellow/Mustard
Violet/Beige
Violet/Black
Violet/Aqua
Violet/Green
Violet/Mustard
Rose/Beige
Rose/Black
Rose/Aqua
Rose/Green
Rose/Mustard
Aqua/Beige
Aqua/Black
Aqua/Aqua
Aqua/Green
Aqua/Mustard
7 of 16
402-1008 MP
X 1
-
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Position 4 Connector B Type Catalog Number 0
Description None Use this value for a pigtail assembly.
12 Fiber MPO without Pins N
TE Connectivity MPO cassettes are made with pins. Therefore cables for use with MPO cassettes should be without pins.
P
12 Fiber MPO with Pins
L
LC Duplex
S
SC Duplex
T
ST
F
FC
M
MTRJ Plug without pins
W
MTRJ Plug with pins
6
SC APC Duplex (Single-mode only)
7
LC APC Duplex (Single-mode only)
Secure Connectors (Use Position 2 to Select Secure Connector Color) 12 Fiber MPO SECURE without Pins C
TE Connectivity MPO cassettes are made with pins. Therefore cables for use with MPO cassettes should be without pins.
E
12 Fiber MPO SECURE with Pins
8
LC SECURE Duplex
9
MT-RJ SECURE Plug
REV D3
8 of 16
402-1008 MP
X
-
1
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Position 5 (Table 1 of 2) Connector B Color/Keying for MPO Housing Colors by Fiber Type/Performance
Catalog Number
Description Inner Housing Color/Outer Housing (Slider) Color OM1
OM2
OM3/OM4
Single-mode
OPTIMATE
Inner/Outer
Inner/Outer
Inner/Outer
Inner/Outer
Inner/Outer
Black/Beige
Black/Black
Black/Aqua
Black/Green
Black/Mustard
-
-
-
-
-
Standard Connector Use this value for standard connectors (connectors that are not keyed for SECURE adapters).
C
None
0
Use this value for a pigtail assembly.
Secure Connector Colors/Keying MPO SECURE plugs are designed for use with MPO SECURE cassettes and will only mate with like colored adapters.
B N G W S R Y V P A
REV D3
Blue Orange Green Brown Slate Red Yellow Violet Rose Aqua
Blue/Beige
Blue/Black
Blue/Aqua
Blue/Green
Blue/Mustard
Orange/Beige
Orange/Black
Orange/Aqua
Orange/Green
Orange/Mustard
Green/Beige
Green/ Black
Green/Aqua
Green/Green
Green/Mustard
Brown/Beige
Brown/ Black
Brown/Aqua
Brown/Green
Brown/Mustard
Slate/Beige
Slate/Black
Slate/Aqua
Slate/Green
Slate/Mustard
Red/Beige
Red/Black
Red/Aqua
Red/Green
Red/Mustard
Yellow/Beige
Yellow/Black
Yellow/Aqua
Yellow/Green
Yellow/Mustard
Violet/Beige
Violet/Black
Violet/Aqua
Violet/Green
Violet/Mustard
Rose/Beige
Rose/Black
Rose/Aqua
Rose/Green
Rose/Mustard
Aqua/Beige
Aqua/Black
Aqua/Aqua
Aqua/Green
Aqua/Mustard
9 of 16
402-1008
Position 5 (Table 2 of 2) Connector B Color/Keying for LC and MT-RJ Catalog Description Number C 0
Standard Connector Use this value for standard connectors (connectors that are not keyed for SECURE adapters).
None Use this value for a pigtail assembly.
Secure Connector Colors/Keying B N G W S R Y V P A
REV D3
Blue Orange Green Brown Slate Red Yellow Violet Rose Aqua
10 of 16
402-1008 MP
X 1
-
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Position 6 (Table 1 of 2) Cable Type Catalog Number
Description
J
12 Fiber 3mm Interconnect, OFNP
Z
24 Fiber 3mm Interconnect Zipcord, OFNP
1
12 Fiber Backbone, 1x12F, with 3mm Interconnect Subunit, OFNP (Suitable for either horizontal or vertical backbone installations.)
D
24 Fiber Backbone, 2x12F, with 3mm Interconnect Subunits, OFNP (Suitable for either horizontal or vertical backbone installations.)
3
36 Fiber Backbone, 3x12F, with 3mm Interconnect Subunits, OFNP
4
48 Fiber Backbone, 4x12F, with 3mm Interconnect Subunits, OFNP
REV D3
11 of 16
402-1008
Position 6 (Table 2 of 2) Cable Type Catalog Number
Description
7
72 Fiber Backbone, 6x12F, with 3mm Interconnect Subunits, OFNP
9
96 Fiber Backbone, 8x12F, with 3mm Interconnect Subunits, OFNP
H
144 Fiber Backbone, 12x12F, with 3mm Interconnect Subunits, OFNP
REV D3
12 of 16
402-1008
MP
X
-
1
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Position 7 Fiber Type (See Fiber Characteristics Table for Detail)
Catalog Number
Description
1 2 3 4 5
62.5/125µm OM1 50/125µm OM2 OM3 OM4 Single-mode OS2
Fiber Characteristics: 62.5/125 µm
OM1 (850nm/1300nm)
Bend Insensitive 50/125 µm
OM2 (850nm/1300nm)
Cable Maximum Attenuation (These are the attenuation values for the cable only).
OFL Bandwidth 850nm Effective Modal Bandwidth 10GBASE-SR Maximum Distance 40GBASE-SR4 Maximum Distance 100GBASESR10 Maximum Distance Fiber Specification
REV D3
Bend Insensitive
Bend Insensitive
OM3
OM4
(850nm/1300nm)
(850nm/1300nm)
Bend Insensitive Single-mode
OS2 (1310nm/1550nm)
3.5/1.2 dB/km
3.5/1.5 dB/km
3.0/1.0 dB/km
3.0/1.0 dB/km
0.4/0.3dB/km
200/500 MHzkm
500/500 MHzkm
1500/500 MHzkm
3500/500 MHzkm
Not Applicable
Not Applicable
Not Applicable
2000 MHzkm
4700 MHzkm
Not Applicable
33m
82m
300m
550m
Not Applicable
Not Applicable
Not Applicable
100m
150m
Not Applicable
Not Applicable
Not Applicable
100m
150m
Not Applicable
TIA-492AAAA IEC 60793-210 A1b
TIA-492AAAB IEC 60793-210 A1a.1
TIA-492AAAC IEC 60793-210 A1a.2
TIA-492AAAD IEC 60793-210 A1a.3
ITU-T G.657.A2
13 of 16
402-1008 MP
X
-
1
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Position 8 Cable Jacket Color Catalog Number
Description Standard Color
0
Use this value for industry standard cable colors.
Industry Standard Colors By Fiber Type Orange
Orange
Aqua
Aqua
Yellow
OM1
OM2
OM3
OM4
Singlemode
Custom Cable Colors B N G W S R K Y V P A
REV D3
Blue Orange Green Brown Slate Red Black Yellow Violet Rose Aqua
14 of 16
402-1008 MP
X
-
1
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Positions 9-11 Assembly Length
Measured from Tip of Connector A Ferrule to Tip of Connector B Ferrule. The unit of measure is dependent on the selection in Position 12. Each pair of subunits beyond the first two will be 2 inches longer on each end of the assembly, as shown above (This allows a smaller pulling sock to be used).
Catalog Number
Description
001 999
Shortest possible assembly length. Longest possible assembly length.
MP
X 1
-
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Position 12 Unit of Measure
REV D3
Catalog Number
Description
F M
Feet Meters
15 of 16
402-1008
MP
X 1
-
X
X
X
X
X
X
X
XXX
X
2
3
4
5
6
7
8
9-11
12
-
XX 13-14
Position 13-14 Breakout Length
Choose the breakout length for each end. An entry of BF will result in 13.75 inches on the left and 25 inches on the right. The breakout length is defined from the end of the heat shrink transition to the tip of the connector ferrule as shown. The 7” section of exposed subunit shown here will exist on assemblies with any connector other than MPOs selected for connector B, and is non-configurable. Each pair of subunits beyond the first two will be 2 inches longer on each end of the assembly, as shown above.
Catalog Number
Description
Length
A
TFP
30.50
B C F
Choose this option for use with TFP cabinets.
NGF Choose this option for use with NGF cabinets.
18 Inches RMG Choose this option for use with RMG cabinets.
No Breakout
(Inches)
13.75 18 25
N
Use this choice when ordering 12 or 24 fiber interconnect assemblies (cable type J or 2), as there will be no breakout.
No Breakout
S U
Standard 79 Inches Custom Dimension
36 79
XX
REV D3
Choose a value from 10 to 99 inches. Custom length breakouts will be the same on each end of the cable assembly.
XX
16 of 16
