(402/502/602) Virtus 3-way

Transcript

VIRTUS 2-way (402/502/602) VIRTUS 3-way (503/603) Individual driver component specifications WOOFERS VIRTUS MW4 4 Nominal Impedance (Ohms) 100 Power Handling Wrms 300 Max. Trans.Pwr Handling Wrms 87 dB Sensitivity (2.83V/1M) 70-4500 Frequency Response Hz 80 Resonant Freq. Fs Hz 54 (2.1) Voice Coil Diameter mm (inch) 8 (0.51) Voice Coil Height mm (inch) Aluminum Voice Coil Type/ Former HexatechTM Aluminum Voice Coil Wire 3 DC Resistance (Ohms) 0.23 Voice Coil Induct. @1 kHz (MH) Double ferrite rear vented Magnet System 4 (0.16) HE-Magnetic Gap Height mm (inch) 0.48 B-Flux Density (T.M.) 3.33 BL Product/BXL ±2 ( ±0.08) Max. Linear Ex./Xmax mm (inch) 0.73 Suspension Compliance CMS - mm/N 0.76 Electrical Q Factor QES 0.55 QTS 2 QMS 1.42 Mech.Resistance RMS - Ohm/meter 5.96 Moving Mass MMS - gr 4.17 (0.15) Equiv. Can Air Load VAS - L (cu.ft) 64 (9.92) Effective Piston Area SD sq.cm (sq. inch) Cone Type Formed Paper Composite Cone Material cellular fiber Unit Diameter mm (inch) 104 (4.0) Mounting Depth mm (inch) 50 (2.1) Mounting Cutout mm (inch) 95 (3.74) Net Weight Kg (lb) 0.54 (1.92) VIRTUS MW5 VIRTUS MW6 4 120 300 88 dB 65-4000 75 54 (2.1) 12 (0.48) Aluminum HexatechTM Aluminum 3.5 0.32 Double ferrite rear vented 4 (0.16) 0.65 3.53 ±4 (±0.16) 0.49 1.22 0.85 2.82 1.54 9.31 5.55 (0.195) 90 (13.95) Formed Paper Composite cellular fiber 135 (5.25) 56.5 (2.22) 120 (4.72) 0.67 (1.21) 4 140 300 88 dB 55-4000 65 54 (2.1) 12 (0.48) Aluminum HexatechTM Aluminum 3.5 0.33 Double ferrite rear vented 4 (0.16) 0.65 3.41 ±4 (±0.16) 0.57 1.3 0.9 2.88 1.49 10.67 11.38 (0.45) 119 (18.45) Formed Paper Composite cellular fiber 165 (6.50) 61 (2.36) 141 (5.55) 0.739 (1.61) MIDS & TWEETERS CDM600 Nominal Impedance (Ohm) 4 Power Handling (WRms) 100 Max Transient Power Handling W (10ms) 300 Sensitivity (2.83V/1M) dB 90 Frequency Response Hz 600-6000 FS Hz 480 Voice Coil Diameter mm (inch) 54 (2.125) Voice Coil Former Aluminum Voice Coil Wire HexatechTM Aluminum 3.5 DC Resistance Ohm Neodymium Rear Vented Magnet System Selected soft dome Dome Type Silk Dome Material 88.00 (3.50) Unit Diameter mm (inch) 21.00 (0.83) Mounting Depth mm (inch) 75.50 (2.97) Mounting Cutout mm (inch) 0.25 (0.55) Net Weight Kg(lb) MT120 4 80 250 90 1800-22000 1150 28 (1.125) Aluminum Copper 3.7 Neodymium CROSSOVERS MXR200 MXR300 Crossover Point 2200Hz/12dB W: 500Hz / 12dB M:18dB/ 2200Hz/ 12dB T: 2200Hz / 6dB Tweeter+/- 2dB N/A Crossover Controls Wiring Options * Morel operates a policy of continuous products design improvement, consequently specifications are subject to alteration without prior notice. www.morelhifi.com Tweeter+/- 2dB N/A