Preview only show first 10 pages with watermark. For full document please download

4081.22 1-inch Ball Clamp Mark Ii Bolded Items Included In Package

   EMBED

Share

Transcript

408 1. 2 2 1 -i n ch B a l l Clam p M ar k II with Auxiliary Mount Bolded items included in package SOS Batt w/Lite -1 Off 3 -2 On On w/Lite Fuel Gauge TTL Full -3 -4 Ready Light 2 1 4081.71 1-inch Auxiliary Ball Mount Mark II Screw Wing Nut 4081.22 1-inch Ball Clamp Mark II with Auxiliary Mount The 4081.22 Clamp attaches two (2) 1-inch diameter balls. The base plate accepts the Ikelite Auxiliary Ball Mount for the attachment of additional lightweight accessories in the middle of your strobe arm. Perfect for adding a spare modeling light or video light. Plates are spring-loaded for easy assembly and breakdown of your arm system. The Clamp attaches to 1-inch ball clamps from Ikelite, TLC, Ultralight, Nauticam, and others. To attach, turn the Wing Nut counterclockwise to open the Clamp Plates, fit each Clamp end over a 1-inch ball, then turn Wing Nut clockwise to desired tightness. Old and new Ikelite 1-inch balls and clamps are interchangeable. Ball components with an o-ring groove should have an o-ring installed at all times. Limited Warranty This Ikelite product is warranted against any manufacturing defects for a period of one (1) year from the original date of purchase. Defective products should be returned to Ikelite postage paid. Ikelite will, at its sole discretion, repair or replace such products, and will return to customer postage paid. All other claims of any nature are not covered. Except as mentioned above, no other warranty expressed or implied applies to this Ikelite product. Ikelite Underwater Systems 50 West 33rd Street Indianapolis, IN 46208 USA www.ikelite.com © 2014 Ikelite Underwater Systems 4081.22_1-inch_Ball_Clamp_MarkII_For_Accessories_1-0914