Transcript
W NE
HARLEY-DAVIDSON
Helmet COLLECTION ®
CHOOSE FROM 4 LEVELS OF PERFORMANCE AND COMFORT The shell material is made from either Thermoplastic, Polycarbonate, Fiberglass or Carbon Fiber composite construction. Here are the differences:
FOR COMPROMISE
The feel of the wind on your face, optimal protection, or the choice of both in one helmet? Whichever style you go for, fit is crucial. And of course, you want it to look great. But first, learn about head gear. A motorcycle helmet is not a novelty. It’s a serious piece of safety gear and should be carefully selected. What you learn can help you decide which style is really the best for your type of riding.
1
THERMOPLASTIC
2
Polycarbonate
3
FIBERGLASS
4
CARBON FIBER
T
A single-layer, injection-molded material offering a good balance between strength and weight. Requires a larger inner impact liner, which increases shell size and weight.
P
A thermoplastic polymer, often injection molded or thermoformed, highly durable with high-impact resistance.
F
Multiple layers of fiber cloth combined with layers of resin. The strength of the fiberglass weave allows for a smaller inner liner, which is why fiberglass shells are typically lighter and more compact than thermoplastic shells. Ideal for long or hot rides. C
Very similar to fiberglass; the difference is that the cloth is made from extremely tough, carbonized Kevlar material. The inherent strength of Kevlar allows for less material resulting in a lighter and more comfortable shell.
Your Protection on the road is of the utmost importance to Harley-Davidson® Non ECE 22-05 approved versions of these helmets may be available outside of the European Union. Harley-Davidson Europe Ltd only supply the ECE 22-05 approved versions of the helmets featured in this brochure.
Safe gear for safe riding is what our customers deserve.
5/8
Minimally intrusive and lightweight for a feeling of freedom. Ideal for hot weather, with maximum air flow for comfort.
5/8 3/4 3/4
F
Cover your ears and the sides of your face to reduce wind noise. Some can be fitted with a face shield or a visor for extra protection.
Americana Retro T
Delton Sun Shield
THERMOPLASTIC
P
Dolomite
Grey Star Retro
F
Polycarbonate
F
FIBERGLASS
C
Jet II
F
F
CARBON FIBER
Genuine retro
F
Black Label #1
F
Ultra Jet
F
F
3/4 Burnout
F
Commuter
T
Commander
Military Retro
Maywood
T
FXRG® FibeR Jet
F
Elite Retro
P
SWAT
F
Full FAce
Modular
Completely cover the head and face for optimal protection. Equipped with a flip-up face shield. Warm in the winter and with a flow-through ventilation system comfortable in warm weather, too.
A combination of the benefits of full-face and 3/4 helmets. Flip up the face/chin module for easy on and off, and for full-face exposure. Remember to always ride with the module in the closed position.
F
T
Modular Helmet
Fulton
T
THERMOPLASTIC
P
P
Polycarbonate
FXRG® Panoramic vision
F
FIBERGLASS
C
P
F
CARBON FIBER
FXRG® Dual-homologated
T
FXRG® Carbon Fiber Dual-Homologated
C C
BREAKDOWN EVERY HARLEY-DAVIDSON® HELMET IS A TOUGH CHOICE While it might seem like there are as many helmets to choose from as there are roads to ride, all helmets have four major components: a rigid outer shell, an EPS (Expanded Polystyrene) impact-absorbing liner, a chin strap retention system, and padding for fit and comfort.
1
2
FXRG : It’s all about performance ®
3
FXRG® helmets integrate the best technologies and materials in the industry to give you protection and the ultimate in comfort for all-season riding. •
Fiber Jet ¾ helmet’s long-trip visor makes it ideal for either urban or road riding.
•
Panoramic Vision lets you see everything with 125% overall vertical and 110% horizontal vision compared to standard full-face helmets.
•
Dual-Homologated with Integrated Sun Shield comes with optimized sound proofing and aerodynamic performance.
1
2
3
4
Rigid Outer Shell
Distributes the force of an impact while resisting penetration.
Comfort padding Foam liner crushes to absorb the energy of an impact.
4
EPS ImpactAbsorbing Liner
Along with the retention system, helps keep the helmet in place, therefore providing the proper fit.
Retention System Should be snug, yet comfortable. Always fasten while riding.
HELMET
FITMENT
make sure your helmet measures up
Proper fit is vital to the performance and effectiveness of any helmet. Remember: all helmets fit differently, so always try on a helmet before you purchase it. Ask your local dealer to help you choose the helmet that’s right for you.
FIND THE PROPER FIT STEP 1
FASTEN UP
As you put the helmet on, there should be some resistance. Next, fasten the chin strap comfortably snug. The cheek pads should touch your cheeks (but not so that it’s uncomfortable). It’s a bad fit if: You can easily slide a finger between your chin and the strap. There’s space between your brow-line and the inner lining. You’re able to roll the helmet forward and off your head. In any of these cases, try a smaller helmet.
STEP 2
Get moving
Move the helmet from side-to-side and front-to-back. You should feel your skin and scalp move as the helmet moves. You want to feel a slight, even pressure all over your head. Keep in mind that a helmet loosens up a bit as the comfort liner compresses with use, so you want it to fit as tightly as you can comfortably wear it.
STEP 3
15-minute test
Before you buy anything, wear the helmet for at least 15 minutes. Do you feel any uncomfortable pressure points? It might not seem so bad in store, but during a long ride, you’ll really feel it. If you experience any discomfort, try a helmet in a larger size or another style. If you wear eyeglasses or sunglasses when you ride, make sure you’re wearing them during the 15-minute test. They should fit inside your helmet without irritating your ears or the bridge of your nose.
STEP 4
Clear vision
You’ve found a helmet that fits properly. Now check your range of vision to the left, right, and up and down. Absolutely no part of the helmet should obstruct your field of vision. If it does, try another helmet.
CARE
REPLACE YOUR HELMET EVERY 3-5 YEARS
Depending on use, you should replace your helmet every 3 to 5 years according to helmet safety schemes. Keep in mind that glues, resins and other materials break down over time, while hair oils, sweat, cosmetics and the sun’s UV rays add to the helmet’s deterioration. Remember, a helmet is designed for only ONE impact. If a helmet is dropped or suffers any impact, it should be replaced immediately. Any impact may fracture the outer shell or compress the impact-absorbing liner.
MAXIMIZE THE LIFE OF YOUR HELMET NEVER • Expose a helmet to chemicals or excessive heat, as this may degrade the protective properties, even if damage is not visible. • Hang a helmet on a motorcycle’s mirror, turn signal or sissy bar, which may damage the impact absorbing liner. • Use solvents or chemicals to clean any part of the helmet or shield, as they can destroy protective coatings and compromise the structural integrity of the helmet. • Use a dry cloth to clean debris from a face shield as you might scratch the shield. ALWAYS • Before riding, be sure chin straps are tightened properly and not frayed. • Check that visor screws and the face shield are firmly secure. • Use mild soap and water to wash the outer shell. • Clean the shield with warm water and a wet, soft, lint-free cloth immediately after dirt accumulates. • Hand wash the internal liners with mild soap and allow to air dry. • Use compressed air to clear helmet air vents and channels.
WARRANTY Refer to warranty information included with each Harley-Davidson® helmet for warranty details and limitations.
TO FIND THE PERFECT HELMET, TALK TO YOUR HARLEY-DAVIDSON DEALER
www.harley-davidson.eu/motorclothes © 2016 H-D. All rights reserved. EC-20036-17E