Transcript
#42551 Alekto
Choose the “Smart One®”
Adjustable Tri-Level Computer Workstation
Assembly Instructions
#42551 Part Drawing P1
Alekto-3 Computer Workstation Description
Qty
Leg
2 EA
P2
Bottom Shelf
1 EA
P3
Stability Panel
1 EA
P4
Right Top Support
1 EA
P5
Left Top Support
1 EA
P6
Shelf Support
2 EA
P7
Top Panel
1 EA
P8
Shelf Panel
1 EA
P9
Cable Tray
Part
Drawing Description
Qty
Hardware List A
Flat Head Screw
28 EA
A2
Long Wood Screw
4 EA
A3
Wood Screw
3 EA
B
Interior Threaded Post
20 EA
D
3” Locking Caster (for Front) 2 EA
E
3” Caster (for Back)
2 EA
F
Allen Wrench
1 EA
G
Caster Wrench
1 EA
H
Flat Washer
4 EA
J
Black Plastic Spacer
2 EA
K
Hex Nut
4 EA
1 EA
P10
Keyboard Shelf
1 EA
P11
CPU Sleeve
1 EA
P12
CPU Rod
2 EA
We recommend that you assemble this unit on a table. Tools required: Philips Head Screw Driver, Adjustable Crescent Wrench
#42551 ALEKTO-3
Missing Parts or UPS Damaged Parts For Your Convenience you can EMAIL us at
Assembly Diagram
[email protected]
To Assemble:
24HOURS 7 DAYS A WEEK
Illustration # 1
1. Identify and Separate all the Parts and Hardware.
P1
2. Attach Bottom Shelf (P2) and Stability Panel (P3) to 2 Legs (P1) using 8 Flat Head Screws (A) and 8 Interior Threaded Posts (B) as shown in Illustration # 1. (Do not tighten screws all the way) 3. Attach Casters to 2 Legs (P1). 2 Locking casters (D) in the front and 2 Casters (E) in the back. Tighten Casters using Caster Wrench (G).
A
B
P1
P3
P2
E D P6
Illustration # 2
4. Attach 1 Right Top Support (P4) and Left Top Support (P5) to 2 Legs (P1) at desired location (see Options below) using 6 Flat Head screws (A) and 6 Interior Threaded Posts (B) as shown in illustration # 2.
B
A
P4
P6
5. Attach 2 Shelf Suport (P6) to 2 Legs (P1) at desired location using 6 Flat Head screws (A) and 6 Interior Threaded Posts (B) as shown in illustration. P5
P1
P1
Shelf Panel
Top Panel
Top Panel
Shelf Panel
Option # 1
Option # 2
Illustration # 3
6. Attach Top Panel (P7) to the Top Supports (P4 & P5), and Shelf Panel (P8) to the Shelf Supports (P6) using 8 Flat Head screws (A) as shown in Illustration # 3.
P8
P6 A
7. Attach cable Tray (P9) to the Top Panel (P7) using 3 Wood Screws (A3).
P4 P7
8.
Extend Slides on Top Supports (P4 & P5) and attach Keyboard Shelf (P10) using four Screws (A2) as Shown in Illustration #4.
P5 A3
Illustration # 4
P9
P4
P5 P10 Illustration # 5
A2 P12 H J H K
9. Attach 2 CPU Rods (P12) to the Right Leg or Left Leg as shown in illustration #5. Secure each Rod with 2 Hex Nuts (K), 2 Flat Washers (H), and 1 Black Plastic Spacer (J).
K
Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m. Central Standard Time
Illustration # 6
Toll-Free Customer Service
1-800-749-2258
P11
P12
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made by your dealer using factory authorized parts.
10. Slide CPU Sleeve P11 over ends of CPU Rods (P12) as shown in illustration # 6. 11. Tighten all screws securely.
Important The Balt product you have purchased is guaranteed against material and workmanship defects. This guarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal use due to defect or imperfection, the defective part or product will be replaced. Damage caused by common carriers during shipment is not included in this guarantee. This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or implied shall apply. Failure to follow instructions found in Important Information Section of Owner Sheet shall void the guarantee. Consequential or incidental damages and or costs are not refundable. 42551_06-21-10
#42551 ALEKTO-3 Adjustable Tri-Level Computer Workstation
For more information
1-800-749-2258
30" x 18
22
Top Panel
Top Panel
Shelf Panel
0" 3 x
52"
12
½ 15-
Shelf Panel
½" 2 x2
Option # 1
Option # 2
½" 3 x2 25-½"
8-10" ADJ.
Height adjustable ranging from 23½” to 47½” for Keyboard shelf and 27½” to 51½” for Monitor Shelf. Shipping Information 3.7 Cubic Feet 79 lbs.
Keyboard Shelf pulls out for individual user Comfort. Includes CPU Holder and 3” Casters for mobility. 5”
29”
50”
Available in vacuum formed Black Laminate w/Silver Frame. Ships UPS. 42551_06-21-10
