Transcript
Model 6724 PRO-FIT® 4260
Rectangular Air Massage Bath
Features • 60" x 42" x 20-1/4" Rectangular air massage bath • Powerful, single-speed blower and air switch for reliable operation • Heating element warms the air before it enters the bathing well through the perimeter channel • 20 minutes after the bath is turned off the motor automatically blows any remaining residue out of the “Quick Drain” air channel • Limited One-Year Warranty • Available in Standard Colors: white, almond, biscuit and bone
Model 6724 (Shown with metal air switch and Lift and Turn drain)
Options Lift and Turn Drain Model # Description PF1320 PF1321 PF1322 PF1323
Polished Chrome Everbrass (PVD) Brushed Nickel Oil Rubbed Bronze
Model # Description SWP150
Nailing flange kit
SWAP00
Factory installed nailing flange
Metal Trim Model #
Description
PF2335
Polished Chrome
PF2336
Everbrass (PVD)
PF2337
Brushed Nickel
PF2338
Oil Rubbed Bronze
Printed in U.S.A. 12/12 © 2012 Mansfield Plumbing Products, LLC ® Pro-fit is a registered trademark of Mansfield Plumbing Products, LLC.
Model # PF1325C
Description 5' Removable apron
MADE IN USA Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax 419-938-6234 Website: www.mansfieldplumbing.com • Email:
[email protected]
Model 6724 PRO-FIT® 4260
Rectangular Air Massage Bath
Specifications Model #
Description
6724
Codes/Standards
60" x 42" x 20-1/4" Rectangular Air Massage Bath
Specification
Description
Specification
Description
Material
Acrylic, fiberglass reinforced
Number of Jets
47
Construction
Self-contained, pre-plumbed air massage bath, Water Capacity mounted on a pre-leveled base
42 gal. (min.) / 55 gal. (max.)
Blower Motor
120V, 60HZ, 6.0 Amp, Single Speed blower, 200 Watt Heater, Single Phase–Pre-mounted
Floor Loading Weight
47 lbs. / sq. ft. (229 kg/m2)
Electrical Requirements
120V, 15 Amp, GFCI protected
Shipping Weight
148 lbs. (67 kg)
On/Off Control
Air Switch
Warranty
Limited One Year
Technical Information 8 3/4"
60"
(1524 mm)
(222 mm)
PLUMBING ROUGH-IN
21"
(533 mm) DRAIN
42"
(1067 mm)
SLOPE 1/4"/ Ft.
STD
26"
31"
(660 mm) (787 mm)
2 14" (57 mm) AIR SWITCH
42"
(1067 mm)
Blower Location (Standard Only) Required Blower Motor Access 20" W x 15" H
54"
42" (1067 mm)
(1372 mm)
18 3 4"
1 4 " (514 mm)
20
18 3 4"
(476 mm)
CENTER OVERFLOW
16 1 2"
(419 mm)
(476 mm)
Note: Measurements may vary 1/4" (+/-)
These dimensions are nominal and subject to change without notice. When tested for compliance to the requirements of AMSE A112.19.7M for “Whirlpool Bath Appliances” and ANSI Z124.1.2M “American National Standard for Plastic Bathtub and Shower Units”, the tested units are found to comply and are acceptable for listing under IAPMO R & T. Certified for permanent electrical connection only. Printed in U.S.A. 6/12 © 2012 Mansfield Plumbing Products, LLC ® Pro-fit is a registered trademark of Mansfield Plumbing Products, LLC.
MADE IN USA Mansfield Plumbing Products LLC • Customer Service Toll Free 877-850-3060 • Fax 419-938-6234 Website: www.mansfieldplumbing.com • Email:
[email protected]
