Transcript
Winter 2011 - 2012
FREE! Mini MultiTool With every tool or compressor purchased
SENCO EXCLUSIVEu!sion F Massive Savings oCnordless the World’s First s. Pneumatic Senco nailers FUSION F-15
with Fusion Technology use compressed air that is permanently sealed in the tool’s self-contained, built-in cylinder to unleash a shot of pure, portable pneumatic power every time you pull the trigger. ● As fast and quiet as a pneumatic ● Around 60% faster than typical gas nailers ● No gas cells to buy ● No compressor, hose or fittings to purchase ● Save around £250 a year on fuel cells (depending on usage) ● Save about £100 a year on servicing and cleaning
A 34° angled 15 gauge nailer ● Robust aluminium drive cylinder ● Rugged aluminium magazine ● Reversible belt hook ● Thumbwheel depth of drive control ● Bump, Sequential and Off switch ● Nose mounted LED work light ● EZ-Clear feature ● Weight: 2.77kg ● Height: 330mm ● Width: 76mm ● Drives a range of 15 gauge nails from 32mm - 63mm
Recharge in only 15 minutes When fully charged the 18v Li-Ion battery can deliver in excess of 500 drives. ‘Quick Charge’ system reaches 80% capacity in just 15 minutes. Can even be charged while hot. 2-YEAR TOOL WARRANTY
1-YEAR BATTERY WARRANTY
N! COMING SOO
F-16 ION NEW 16FgUFiS r ile Na sh ni ion.co.uk www.sencofus
SAVE 25% ON FUSION FASTENERS! FOR THE FUSION F-15 Code: DA15EAB 32mm chisel smooth galv
15 Guage ONLY £7.52 (£9.03 inc. VAT)
Code: DA17EAB 38mm chisel smooth galv
ONLY £7.68
(£9.22 inc. VAT)
Code: DA19EAB 44mm chisel smooth galv
ONLY £7.84
(£9.41 inc. VAT)
Code: DA21EAB 50mm chisel smooth galv
ONLY £8.80
(£10.56 inc. VAT)
Code: DA23EAB 53mm chisel smooth galv
ONLY £8.86
(£10.63 inc. VAT)
Code: DA25EAB 63mm chisel smooth galv
ONLY £9.78
(£11.74 inc. VAT)
Prices shown per 1,000. Minimum order 4,000
18 Guage FOR THE FUSION F-18 Code: AX13EAAP 25mm chisel med hd brad galv ONLY £1.30 (£1.56 inc. VAT)
£465 Code: 5N7001N £558 inc.VAT
S AV E £160 £625 LIST
FUSION F-18 A straight magazine 18 gauge bradder ● Robust aluminium drive cylinder ● Rugged magazine ● Reversible belt hook ● Thumbwheel depth of drive control ● Bump, Sequential and Off switch ● Nose mounted LED work light ● EZ-Clear feature ● Weight: 2.73kg ● Height: 330mm ● Width: 76mm ● Drives a range of 18 gauge pins from 16mm - 55mm
S AV E £155
£460
Code: AX15EAAP 32mm chisel med hd brad galv ONLY £1.51
(£1.81 inc. VAT)
Code: AX17EAAP 38mm chisel med hd brad galv ONLY £1.82
(£2.19 inc. VAT)
Code: AX19EAAP 44mm chisel med hd brad galv ONLY £2.43
(£2.92 inc. VAT)
To order
Code: AX21EAAP 50mm chisel med hd brad galv ONLY £2.73
(£3.28 inc. VAT)
01925 445566
Prices shown per 1,000. Minimum order 5,000
£615 LIST
Code: 6E7001N £552 inc.VAT
[email protected]
Up to
SAVE 25% ON FASTENERS FOR PNEUMATICS
Staples Code: C04BAAP Code: C05BAAP Code: C06BAAP Code: C08BAAP Code: C09BAAP Code: C10BAAP Code: L10BAB Code: L13BAB Code: L15BAB Code: L17BAB Code: N11BABB Code: N13BABB Code: N16BABB Code: N21BABB Code: P11BABB Code: P15BABB Code: P21BABB Pins/Brads/Nails Code: JS12ECA Code: JS15ECA Code: JS18ECA Code: JS25ECA Code: AX13EAAP Code: AX17EAAP Code: AX21EAAP Code: RX13EAA Code: RX15EAA Code: RX17EAA Code: RX19EAA Code: RX21EAA Code: RX25EAA Code: DA15EAB Code: DA19EAB Code: DA23EAB Code: GE51APB Code: GE51AAB Code: HE56AAB Code: HE56APB Code: HC59APB Code: HC59AAB Code: SE15AABV Code: PA-SE15APBV Code: PA-SE21APBV Code: SE21AABV Code: BL21AABF Code: PA-BL21APBF Code: GL25AABF
Top Senco brand nailers and staplers now available at incredible money-saving prices! All these genuine Senco pneumatics are brand new and come with full manufacturer’s warranties. See our website for details. We’ve even knocked 25% off the cost of all these fasteners too. But hurry, at these Super Saver Prices stocks won’t With every tool last long! or compressor
FREE!
Mini Multi Tool
purchased
All offers valid until 31.03.2012 subject to availability.
Crown 9.2mm, leg 6mm, galv Crown 9.2mm, leg 8mm, galv Crown 9.2mm, leg 10mm, galv Crown 9.2mm, leg 12mm, galv Crown 9.2mm, leg 14mm, galv Crown 9.2mm, leg 16mm, galv Crown 5.8mm, leg 16mm, galv, sencote Crown 5.8mm, leg 25mm, galv, sencote Crown 5.8mm, leg 32mm, galv, sencote Crown 5.8mm, leg 38mm, galv, sencote Crown 11.4mm, leg 19mm, galv, sencote Crown 11.4mm, leg 25mm, galv, sencote Crown 11.4mm, leg 35mm, galv, sencote Crown 11.4mm, leg 50mm, galv, sencote Crown 26.5mm, leg 19mm, galv, sencote Crown 26.5mm, leg 32mm, galv, sencote Crown 26.5mm, leg 50mm, galv, sencote
For A For A For A For A For A For A For B For B For B For B For C For C For C For C For H For H For H
£0.41 (£0.49 inc. VAT) £0.41 (£0.49 inc. VAT) £0.38 (£0.46 inc. VAT) £0.41 (£0.49 inc. VAT) £0.60 (£0.72 inc. VAT) £0.68 (£0.82 inc. VAT) £2.04 (£2.45 inc. VAT) £2.57 (£3.08 inc. VAT) £3.00 (£3.60 inc. VAT) £3.40 (£4.08 inc. VAT) £4.19 (£5.03 inc. VAT) £4.59 (£5.51 inc. VAT) £4.99 (£5.99 inc. VAT) £5.39 (£6.46 inc. VAT) £4.10 (£4.92 inc. VAT) £4.82 (£5.78 inc. VAT) £5.53 (£6.64 inc. VAT)
Min. Order 35,000 Min. Order 28,000 Min. Order 50,000 Min. Order 35,000 Min. Order 32,000 Min. Order 27,000 Min. Order 5,000 Min. Order 5,000 Min. Order 5,000 Min. Order 5,000 Min. Order 20,000 Min. Order 20,000 Min. Order 10,000 Min. Order 10,000 Min. Order 10,000 Min. Order 10,000 Min. Order 10,000
23g x 12mm pins 23g x 15mm pins 23g x 18mm pins 23g x 25mm pins 18g x 25mm chisel med hd brad galv 18g x 38mm chisel med hd brad galv 18g x 50mm chisel med hd brad galv 16g x 25mm brads Galv 16g x 32mm brads Galv 16g x 38mm brads Galv 16g x 45mm brads Galv 16g x 50mm brads Galv 16g x 63mm brads Galv 15g x 32mm chisel smooth galv 15g x 44mm chisel smooth galv 15g x 53mm chisel smooth galv Ø 2.9mm x 50mm dia ring brite Ø 2.9mm x 50mm dia ring galv Ø 3.1mm x 70mm dia ring galv Ø 3.1mm x 70mm dia ring brite Ø 3.1mm x 90mm dia smooth brite Ø 3.1mm x 90mm dia smooth galv Ø 2.1mm x 32mm dia ring galv Ø 2.1mm x 32mm dia ring brite Ø 2.1mm x 50mm dia ring brite Ø 2.1mm x 50mm dia ring galv Ø 2.5mm x 50mm dia ring galv Ø 2.5mm x 50mm dia ring brite Ø 2.9mm x 63mm dia ring galv
For D For D For D For D For E For E For E For F For F For F For F For F For F For G For G For G For I For I For I For I For I For I For J For J For J For J For K For K For K
£1.06 (£1.27 inc.VAT) £1.06 (£1.27 inc.VAT) £1.22 (£1.46 inc.VAT) £1.62 (£1.95 inc.VAT) £1.30 (£1.56 inc. VAT) £1.82 (£2.19 inc. VAT) £2.73 (£3.28 inc. VAT) £2.47 (£2.96 inc.VAT) £2.84 (£3.41 inc.VAT) £3.21 (£3.85 inc.VAT) £3.44 (£4.12 inc.VAT) £3.66 (£4.39 inc.VAT) £4.65 (£5.58 inc.VAT) £7.52 (£9.03 inc. VAT) £7.84 (£9.41 inc. VAT) £8.86 (£10.63inc. VAT) £12.91 (£15.49 inc.VAT) £14.22 (£17.07 inc.VAT) £19.41 (£23.29 inc.VAT) £19.56 (£23.47 inc.VAT) £15.91 (£19.09 inc.VAT) £20.70 (£24.84 inc.VAT) £3.65 (£4.37 inc.VAT) £3.59 (£4.30 inc.VAT) £4.60 (£5.52 inc.VAT) £5.42 (£6.50 inc.VAT) £7.74 (£9.29 inc.VAT) £5.64 (£6.77 inc.VAT £12.77 (£15.33 inc.VAT)
Min. Order 10,000 Min. Order 10,000 Min. Order 10,000 Min. Order 10,000 Min. Order 5,000 Min. Order 5,000 Min. Order 5,000 Min. Order 2,000 Min. Order 2,000 Min. Order 2,000 Min. Order 2,000 Min. Order 2,000 Min. Order 2,000 Min. Order 4,000 Min. Order 4,000 Min. Order 4,000 Min. Order 3,000 Min. Order 3,000 Min. Order 3,000 Min. Order 3,000 Min. Order 3,000 Min. Order 3,000 Min. Order 18,900 Min. Order 18,900 Min. Order 12,600 Min. Order 12,600 Min. Order 10,800 Min. Order 10,800 Min. Order 6,750
K K K K L L L
Prices shown per 1,000. Minimum orders as shown.
SFT10XP C
Senco SLS - 20 L
Fine wire C Stapler 6-16mm
Medium Wire Stapler L Stapler 10-38mm For:
For: Cabinet Backs Upholstery Felt Insulation Mirror/Picture Frames Drawer Assembly ● Joint Pinning Dowel Pinning
£145
FinishPro 18 AX Pinner
E
Dual Action trigger 15-55mm For: Cabinets Small Trim Furniture Repair Baseboards Picture Frames Crafts
£105 £126 inc. VAT Code: 1U2025N
Rear exhaust Easy open latch ● Adjustable fastener length
For:
Clipped Head Nailer Timber Strip nailer 50-90mm Frame
I
Sub flooring Decking Sheathing Fencing Pallets Crates Wood-toGreen Concrete
LIST £425 ● 20 degree angled magazine ● Fast cycle time £238.80 inc. VAT means higher Code: 2G2001N productivity
£199
FinishPro 10 JS
LIST £177
FinishPro 32 nailer
FinishPro 35 nailer
WC150XP
16g 32-63mm Restrictive Trigger
F
SCN48
For: Pallets Boxes & Crates Displays Sheathing Fencing, Decking Sub Flooring Garden Furniture
£345 £414 inc. VAT Code: SCN48
£199 £238.80 inc. VAT
LIST £299
LIST £525
●
SCN49 For: Fencing Siding Sub Flooring Crates Boxes Sheathing
LIST £575
£375 £450 inc. VAT Code: SCN49
Multi directional exhaust ● Adjustable depth of drive ●
■ ■ ■
Rear exhaust Smooth metal cap Adjustable fastener length
P Stapler 18-35mm Dual Action
H
For: Butt-Joints Cabinets Foam Insulation Board Furniture Joining Materials to Corrugated Lathing
LIST £395 ■ ■
Code: 4W2001N
K
Coil nailer 32-65mm
£99 £118.80 inc. VAT
£295 £354 inc. VAT
Easy clear latch ● Full soft grip Code: 1Y2002N
Well balanced and powerful for heavy duty applications ● Adjustable trigger ● Adjustable depth of drive ●
G
15g finish nailer 32-63mm Restrictive Trigger For: Crown Moulding Architrave Skirting & Dados Door Frames Window Casings Exterior Finish Trim Decorative Trim Cabinet Face Frames
J
Construction coil nailer 32-50mm
£299
●
D
Doors Small Trim Glazing Bead Carvings Ornamentals Picture Frames Birdhouses & Beehives
For: Flooring Roofing Sheathing Framing Packaging
LIST £495
For:
23g pinner 12-25mm Cabinet
Code: 2C2001N
£249
£155
LIST £159
C
Dual action trigger stapler 25-50mm
Lightweight ● Well balanced £358.80 inc. VAT ● Adjustable depth Code: 582001N of drive
LIST £225 ● Easy clear latch £186 inc. VAT ● Full soft grip Code: 1X2201N ● Rear bumper
●
SNS45XP
LIST £395 ● Oil free operation ● Lightweight £298.80 inc. VAT Code: 492004N ● Easy to use
For: Cabinets Interior Trim Chair Rails Moulding Baseboards Bookshelves Exterior Trim
●
FramePro 651
Furniture Beds Garden Products Drywall
A
LIST £175 Streamline barrel design ● Easy to operate in tight spaces £174 inc. VAT ● Fingertip magazine release Code: 6S2021N
B
Lightweight Positive-locking adjustable depth of drive
SCN65
L
Coil nailer 50-90mm For: High Production Framing Sheathing Decking Sub Flooring Decks Pallets/Pallet Repair
£599 £718 inc. VAT Code: 542001N
LIST £799 ■
■
Highest power-toweight ratio in its class Lightweight for superb balance and operator comfort
To order Tel: 01925 445566 email:
[email protected]
DS200-AC
A
110 volt corded 25-50mm
DS202 14 volt
B
14 volt 2300 rpm cordless 25-50mm. 2 batteries
S AV E
£110 Senco DuraSpin collated screwdrivers are the No. 1 - the undisputed trade favourite. The first choice for all big screw fastening jobs. Now there has never been a better time to acquire one because we have slashed the price not only on all these tools, but also these essential fasteners. Every DuraSpin includes a free Mini MultiTool.
DS205 14 volt
C
Cordless 25-50mm. 2 batteries 4000 rpm
D
Cordless 25-75mm. 2 batteries
£104
£139
List £249
14.4 volt slide in battery ● Patented clutch design for longlasting durability ● One hour charger ● 2300 rpm ●
For: Drywall (to wood or steel studs) Packaging Crating Floor Sheathing Underlayment Cement Board
List £339
£166.80 inc. VAT
DS275 18 volt Li-Ion cordless 25-75mm 1 Battery
For: Wood to wood Drywall (to wood or steel studs) Sub-flooring Joinery Packaging
£235 £282 inc. VAT
Code: 3P7001N
Code: 1R7002N
S AV E
S AV E
E
S AV E
DS275 AC
F
110 volt corded 25-75mm
£125 S AV E
£135
£139
£101 Reverse feature to remove screws ● Patented clutch design for longlasting durability ● 3000 rpm ●
14.4 volt slide in battery ● Patented clutch design for longlasting durability ● One hour charge ● 4000 rpm ●
List £404
DS275 18 volt
S AV E
Trigger lock for continuous work ● Adjustable depthof-screw drive ● Drywall and wood nosepiece ● 3300 rpm ●
Reverse feature to remove screws ● Patented clutch design for longlasting durability ● One hour charger ● 3000 rpm ●
For: Wood to wood Drywall (to wood or steel studs) Sub-flooring Joinery Packaging
£265 £318 inc. VAT
Code: 2R7001N
List £415
For: Drywall Packaging Crating Floor Sheathing Underlayment Cement Board Decking
£280
Reverse feature to remove screws ● Patented clutch design for longlasting durability ● 3000 rpm ●
£250
List £375
£336 inc. VAT
Code: 2P7001N
For: Drywall Packaging Crating Floor Sheathing Underlayment Cement Board Decking
£300 inc. VAT
Phillips bits/st.129,5mm (2 in a pack) Screw bit SQ2 129,5mm (2 in a pack) Screw bit PH2 159,6mm (2 in a pack) Screw bit SQ2 159,6mm (2 in a pack) 3.9 X 25mm Drywall/wood screw 3.9 X 30mm Drywall/wood screw 3.9 X 35mm Drywall/wood screw 3.9 X 45mm Drywall/wood screw 3.9 X 50mm Drywall/wood screw 3.9 X 55mm Drywall/wood screw 4.5 X 75mm Drywall/wood screw 3.9 X 25mm Drywall/light steel screw 3.9 X 35mm Drywall/light steel screw 3.9 X 45mm Drywall/light steel screw 4.2 X 25mm Flooring wood/wood screw 4.2 X 35mm Flooring wood/wood screw 4.2 X 45mm Flooring wood/wood screw 4.2 X 50mm Flooring wood/wood screw 4.2 X 55mm Flooring wood/wood screw 4.2 X 55mm Flooring wood/wood screw 4.2 x 55mm Flooring wood/wood screw 4.5 X 60mm Flooring wood/wood screw 4.5 X 65mm Flooring wood/wood screw 4.5 X 75mm Flooring wood/wood screw
For A B C For A B C For D E F For D E F For A B C D E F For A B C D E F For A B C D E F For A B C D E F For A B C D E F For A B C D E F For D E F For A B C D E F For A B C D E F For A B C D E F For A B C D E F G For A B C D E F G For A B C D E F G For A B C D E F G For A B C D E F G For A B C D E F G For A B C D E F G For D E F G For D E F G For D E F G
ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY ONLY
£6.83 £6.83 £16.50 £16.50 £9.51 £9.80 £9.99 £11.80 £12.83 £13.49 £25.53 £9.61 £11.23 £11.80 £13.28 £15.11 £17.45 £20.44 £22.92 £22.92 £22.92 £22.08 £28.08 £28.26
ALL PRICES PER BOX OF 1000 COLLATED SCREWS
£195 £234 inc. VAT
Code: 4P7002N
Code: 6T7001N
SAVE UP TO 35% ON DURASPIN SCREWS Code: EA0122B Code: EA0123B Code: EAP27530B Code: EAS27530B Code: 39A25MP Code: 39A30MP Code: 39A35MP Code: 39A45MP Code: 39A50MP Code: 39A55MP Code: 45A75MP Code: 39B25MP Code: 39B35MP Code: 39B45MP Code: 42K25MY Code: 42K35MY Code: 42K45MY Code: 42W50MY Code: 42W55MY Code: 42Y55MY Code: 42Z55MY Code: 45X60MY Code: 45W65MY Code: 45F75MY
List £296
For: Drywall Packaging Crating Floor Sheathing Underlayment Cement Board Decking
(£8.20 inc. VAT) (£8.20 inc. VAT) (£19.80 inc. VAT) (£19.80 inc. VAT) (£11.41 inc. VAT) (£11.77 inc. VAT) (£11.98 inc. VAT) (£14.15 inc. VAT) (£15.40 inc. VAT) (£16.18 inc. VAT) (£30.63 inc. VAT) (11.54 inc. VAT) (£13.47 inc. VAT) (£14.15 inc. VAT) (£15.94 inc. VAT) (£18.13 inc. VAT) (£20.94 inc. VAT) (£24.53 inc. VAT) (£27.51 inc. VAT) (£27.51 inc. VAT) (£27.51 inc. VAT) (£26.49 inc. VAT) (£33.69 inc. VAT) (£33.91 inc. VAT)
DS300 AC
G
230 volt corded 25-75mm Integrated system for stand up applications ● Infinitely adjustable height ● Corded for continuous action ● 3300 rpm ●
S AV E
£129
For: Decking Flooring Underlayment Cement Board
List £404
£275 £330 inc. VAT
Code: 1P7001N
These are genuine Stock Clearance Bargains. Once they’re gone... they’re gone! Pick what you are looking for from this range of Cordless and Pneumatic genuine Senco nailers and staplers. Prices have been slashed on every one, but they still come with full Senco warranties. These are Tool Box Bargains you cannot afford to miss.
Cordless 32
S AV E £186
16g Finish Nailer
14.4v battery operated Adjustable Depth of Drive ● Over-Mould Comfort grip ● EZ-Clear for quick jam clearance ● 32-63mm 16g Pins List ● 16g Nails 32-63mm £385 For: Baseboard Cabinets, Chair Rails Doors and Windows £238.80 inc. VAT Trim & Finish ● ●
●
● ●
S AV E £89
Nailer & Stapler
● ● ● ● ●
● ●
●
£95 £114 inc. VAT
For: Trim Moulding Furniture Cabinets
£89 £106.80 inc. VAT
Code: 932001N
PW200 ● ● ● ●
Heavy Wire Stapler
More durable Comfort over moulded grip 360° adjustable exhaust 22-50mm P Staples
For: Lathing Roof & Siding Felt Furniture & Frames Case Goods, Carton to Skid Packaging Insulation Attachment
List £410
£295 £354 inc. VAT
S AV E £51
Medium Wire Stapler
List £130
For: Cabinets Drawer Assembly Picture Frames Case Backs Crafts
£79 £94.80inc. VAT
Code: 1V2012N
● ● ●
Code: 2T2001N
16g Finish Nailer
S AV E £58
Heavy duty casing Nail reload indicator 32-63mm 16g Pins
For: Cabinets Interior Trim Chair Rails Moulding Baseboards Bookshelves Exterior Trim
FP750XL ● ● ● ●
S AV E £115
For: Medium to heavy duty jobs & second fix applications Moulding Exterior Finish Decorative Trim Cabinet Face Frames & Skirting Door Frames, Dados Window Casings Architrave Code: 987002N
Rear exhaust Easy open latch Hardened steel driver 10-25mm M Staples
Senco A250SM
S AV E £65 List £154
S AV E £200
Code: 2D2001N
15g Finish Nailer
Soft grip Heavy duty casing Soft rubber heel Quick jam clearance 32-63mm 15g Brads
£238.80 inc. VAT
SLS 15 M ●
List £184
Senco A250FN
£199
Code: 2N7002N
2 in 1 design allows for stapling and nailing in a single tool ● Rear exhaust ● 15-25mm 18g AX-AY Pins 12-25mm finewire L type staples For: For: Furniture Cabinets Frames Case backs Furniture Trim Chair Rails Mirror Frames Drawers Picture Frames Fascia
15g Finish Nailer
14.4V battery operated 600 nails per charge Angled magazine for easy access to awkward corners Cushioned trigger 15g DA nails 32-63mm
List £399
●
Soffits
● ●
£199
FinishPro 2N1
Cordless 41
List £147
£89 £106.80 inc. VAT
Code: 962001N
Nailer
Guidebody for a truer driver Comfort grip handle Straight-line 30° magazine 50-90mm Strip nail
For: Framing, Truss building Subflooring Sheathing, Decking, Wood-to-concrete block Siding, Fencing Pallets and Crate assembly.
S AV E £534
List £929
£395 £474 inc. VAT
Code: 862001N
30% off!
£239 £286.80 inc. VAT
PC1010 110V 0.5HP-3.8ltr Code: PC1010UK1DS
PC1010 Combo Kit
S AV E £62
110V Compressor Code: PC0964UK1DS
or 230V Compressor
or 230V 0.5HP-3.8ltr
+ + + +
Code: PC1010UK2DS
£133
List £195
List £345
Code: PC0964UK2DS
£159.60 inc. VAT
FinishPro 18 Nailer Safety glasses Hose Nails
S AV E £106
PC1010
S AV E £164
S AV E £224
S AV E £100 S AV E £164
PC1246
PC1248
PC1250
230V 3.5HP-16ltr Code: PC1246UK2DS List £699
110V 1.5HP-8ltr
110V 2HP-46ltr
Code: PC1248UK1DS
Code: PC1250UK1DS
£475 £570 inc. VAT
or 230V 1.5HP-8ltr Code: PC1248UK2DS List £299
£199
PC1251 List £499
£335 £402 inc. VAT
110V 2.5HP-20ltr Code: PC1251UK1DS List £499
£335 £402 inc. VAT
£238.80inc. VAT
SAVE UP TO 35% ON DRILLS
SUPER VALUE ACCESSORIES
Tool Oil (236ml) £4.61 (£5.53 inc VAT)
30m hose kit
SEN510C
SEN511C
with CEJN couplings
Code: PC0101
£54.84
5m hose kit
(£65.81 inc VAT)
Pneumatic drill keyless 13mm Chuck 800rpm
Pneumatic drill keyless 10mm Chuck 1800rpm
Code: 960053-kit30
with CEJN couplings
£23.02 (£27.62 inc VAT) Safety Glasses Code: 960053-kit5 £4.55 (£5.46 inc VAT) 10m hose kit Code: PC1166 with CEJN couplings
£29.40
£35.28 inc VAT)
Code: 960053-kit5
List £159
£120 £144 inc. VAT
List £120
£89 £106.80 inc. VAT
Code: SEN510C
Code: SEN511C
SEN610C
SEN612
Pneumatic Screwdriver 1800rpm Adjustable clutch
Screwdriver 800rpm Direct drive
List £135
£99 £118.80 inc. VAT
Code: SEN610C
List £115 Code: SEN612
£75 £90 inc. VAT
Orders: 01925 445566
[email protected]
SAVE 25% ON FASTENERS FOR GAS NAILERS GT65RHA
A
16 guage Collated 2nd Fix Nailer Weight: 2.27kg All metal magazine, capacity: 100 nails ● Thumb-operated depth of drive control ● 18 gram fuel cell ● Drives 16 gauge finish nails from 32mm – 63mm ● ●
S AV E £147 List £450
£303 £363.60 inc. VAT
RH Angled Code: RH15EAA-FC 16g x 32mm brads gas pack 2000 16g x 38mm brads gas pack 2000 Code: RH17EAA-FC Code: RH19EAA-FC 16g x 45mm brads gas pack 2000 Code: RH21EAA-FC 16g x 50mm brads gas pack 2000 Code: RH25EAA-FC 16g x 63mm brads gas pack 2000 Code: RH15EGA-FC 16g x 32mm brads gas pack 2000 Code: RH17EGA-FC 16g x 38mm brads gas pack 2000 RX Straight Code: RX15EAA-FC 16g x 32mm brads gas pack 2000 Code: RX17EAA-FC 16g x 38mm brads gas pack 2000 16g x 45mm brads gas pack 2000 Code: RX19EAA-FC Code: RX21EAA-FC 16g x 50mm brads gas pack 2000 Code: RX23EAA-FC 16g x 55mm brads gas pack 2000 Code: RX25EAA-FC 16g x 63mm brads gas pack 2000 Smooth & Ring Shank Code: GE51AABKR-FC 2.87 X 50 gas pack 2000 Code: GE55AABKR-FC 2.87 X 64 gas pack 2000 Code: HE57AABKR-FC 3.1 X 75 gas pack 2000 Code: HC59AABKR-FC 3.1 X 90 gas pack 2000 Code: HC59APBKR-FC 3.1 X 90 gas pack 2000 Concrete Pin Code: SCP2719 Concrete pin 19mm gas pack 1000 Code: SCP2722 Concrete pin 22mm gas pack 1000 Code: SCP2725 Concrete pin 25mm gas pack 1000 Code: SCP2732 Concrete pin 32mm gas pack 1000 Code: SCP2738 Concrete pin 38mm gas pack 1000 Code: SCP2740 Concrete pin 40mm gas pack 1000 Code: SCP3115 Steel pin 15mm step shank gas pack 1000
Code: 5S7001N
For A For A For A For A For A For A For A
ONLY£8.51 (£10.21 inc. VAT) ONLY£8.85 (£10.62 inc. VAT) ONLY£9.18 (£11.02 inc. VAT) ONLY£9.59 (£11.51 inc. VAT) ONLY£10.30 (£12.36 inc. VAT) ONLY£18.41 (£22.10 inc. VAT) ONLY£20.40 (£24.48 inc. VAT)
For B For B For B For B For B For B
ONLY£6.18 ONLY£6.58 ONLY£7.05 ONLY£7.28 ONLY£7.52 ONLY£8.15
For C For C For C For C For C
ONLY£13.09 (£15.71 inc. VAT) ONLY£14.21 (£17.06 inc. VAT) ONLY£17.07 (£20.48 inc. VAT) ONLY£17.72 (£21.27 inc. VAT) ONLY£16.10 (£19.32 inc. VAT)
For D For D For D For D For D For D For D
ONLY£65.00 (£78.00 inc. VAT) ONLY£65.00 (£78.00 inc. VAT) ONLY£65.00 (£78.00 inc. VAT) ONLY£65.00 (£78.00 inc. VAT) ONLY£65.00 (£78.00 inc. VAT) ONLY£65.00 (£78.00 inc. VAT) ONLY£65.00 (£78.00 inc. VAT)
(£7.42 inc. VAT) (£7.89 inc. VAT) (£8.46 inc. VAT) (£8.74 inc. VAT) (£9.03 inc. VAT) (£9.78 inc. VAT)
Prices shown per 1000, min order 1 pack
GT65RHS
B
GT90CH
16 guage Collated 2nd Fix Nailer
●
Weight: 2.17kg ● Magazine capacity: 100 nails ● Thumb-operated depth of drive control ● 6v Ni-MH battery List ● 18 gram fuel cell £450 ● Drives 16 gauge finish nails from 19mm – 65mm
●
●
Weight: 3.6kg All metal magazine, capacity: 70 nails ● Thumb-operated depth of drive control ● 6v Ni-MH battery ● 40 gram fuel cell ● Drives smooth and ring shank nails from 50mm - 90mm
C
£363.60 inc. VAT
S AV E £147
SGP40 Concrete pinner
All-temperature, high voltage ignition 5200 shots per battery charge ● 1300 shots per fuel cell ● Narrow nose for easy track and channel access ● 1000 pins per box, plus fuel cell ● Uses 40 gram fuel cell ● Drives standard black or breakaway style collated pins from 15mm - 40mm ●
S AV E £245
List £475
List £695
£325
£450
£390 inc. VAT
Code: 5F7001N
POPPERS SENCO UK LTD 630 Europa Boulevard, Gemini Business Park, Warrington WA5 7YH www.poppers-senco.co.uk www.facebook.com/sencofusion
To order: 01925 445566 Email:
[email protected] All offers valid until 31.03.2012 subject to availability FREE DELIVERY on all orders over £250 exc VAT. Orders under £250 exc VAT Carriage £9.50
D
●
S AV E £150
£303
Code: 6D7001N
Clipped Head 1st Fix Nailer
£540 inc. VAT
Code: 5H9701N
FREE! Mini
MultiTool With every tool or compressor purchased
