48" Led Low Bay Fixtures, Heritage Series

Transcript

Project Name Fixture Type Catalog # 48" LED Low Bay Fixtures, Heritage Series Advanced light engine technology in a traditional housing design. Wisconsin engineering and craftsmanship utilizing premium components. Our LED lights, light poles and brackets are proudly engineered and manufactured in the USA. We use only the highest quality components, and our LED Low Bay fixtures deliver unmatched light output and efficiency for the below lighting applications. Precision engineered for performance and energy savings, these products dramatically reduce energy consumption by up to 80% and virtually eliminate ongoing maintenance expenses for a variety of customers and applications. Product Overview Highlights: • Engineered and manufactured in Wisconsin, USA from domestic and imported components • ETL Certified: Conforms to UL STD 1598 & CSA STD C22.2 # 250.0 for wet locations • Enclosure: UL/CUL recognized component, IP67 8-latch design • L70 calculated LED life over 300,000+ hours • Drivers are 0-10v dimming standard • Two light engine options from 7,717 – 11,445 lumens for 75-300w HID replacements • Premium high-output Chip-On-Board (COB) LEDs in 5000K, 4000K and 3000K options, custom color temps available upon request • Minimum CRI of 70, custom CRI available Common Applications: • Food processing and breweries • Industrial facilities, car washes and commercial kitchens • Applications that require waterproof and/or dust proof fixtures • Parking structures, garages and basements • Entrances and stairways • Home shops and garages • Laboratories, shop lighting, factories and production lighting • Storage areas, warehouses and loading docks Light Engine Warranty: • 5-year standard limited warranty on all light engine components • Accessories and adders covered by separate OEM supplier warranties LE 800-558-4810 [email protected] NAFCOInternational.com HOURS p GY ideU C H N OL O TE 206 W. McWilliams St. Fond du Lac, WI 54935 300,000+ ENGINE nnyS Intertek LED LIFE 50-80% ENERGY SAVINGS Engineered & Manufactured In The USA D #Su Rev. V04172017 This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice. Product Specifications Housing Construction, Finish & Mounting: • Rugged, one-piece, compression molded, self-extinguishing fiberglass polyester compound with UL 5V flame rating (ASTM D635-74) and F1 weather rating • En-seal™ gaskets provide superior resistance to moisture absorption versus conventional gaskets • Standard suitcase style latches • Molded latch pockets compatible with standard and tamper-proof latches in Celcon®, stainless steel and polycarbonate • IES files, photometric reports and simulations available upon request • Inline thermal-formed lenses available in tapered, shallow and deep profiles or crepe pattern acrylic, DR reinforced acrylic, frosted acrylic or prismatic polycarbonate • En-Seal™ continuous perimeter poured gasket assures lens seal to housing • Standard housings available with one 7/8” conduit entry point on both ends • Standard stainless steel mounting brackets clip to housing for surface or threaded pendant mounting • Fixture Weight: 15 LBS LEGEND 0.1 fc 0.5 fc 2.0 fc 5.0 fc Created & Simulated per IESNA LM-63-1995 80w Lowbay, Type V, 12’ Height Electrical: Energy Control Options: • Operating temp: -40 ℃ to +40 ℃ • Daylight harvesting and photo controls • Standard AC input of 120-277v VAC, up to 480v available • Motion control and dimming • EMI filter: 47CFR, part 2, part 15 • Power factor: >0.9 • Surge protection • CA Title 24 compliance options available upon request • Total harmonic distortion: <20% • Surge protection: IEC/EN 61000-4-5 EMC test standard • Licensed electrician required for installation LE 800-558-4810 [email protected] NAFCOInternational.com HOURS p GY ideU C H N OL O TE 206 W. McWilliams St. Fond du Lac, WI 54935 300,000+ ENGINE nnyS Intertek LED LIFE 50-80% ENERGY SAVINGS Engineered & Manufactured In The USA D #Su Rev. V04172017 This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice. 49-7/8” 38-3/4” Opt Stud 7” 41-1/2” Opt back holes 1-3/8” 4-7/8” 3-1/8” 1-3/4” 6-5/8” 7” Light Engine Specifications (Values Listed for Type V, 5000K) Base Model System Watts LED Watts HID Replacement¹ Number of COBs Drive Current 48-LBHC-50-50-MV-5 52w 48-LBHC-80-50-MV-5 77w 47w 75-175w 2 700 mA 70w 125-300w 3 700 mA Nominal Lumens² Delivered Lumens³ L70 EnergySTAR LED Life⁴ 7,717 6,946 300,000+ Hrs 11,445 10,301 300,000+ Hrs Recommended Lumen Maintenance Factor (LMF)⁴ Type Ambient Initial LMF COB 25 ℃ (77 ℉) 100% 25K Hour Projected 50K Hour Projected 75K Hour Projected 100K Hour Projected LMF⁵ LMF⁵ LMF⁶ LMF⁶ 96% 94% 92% 90% 1. Considered to be a typical HID equivalent. Specific HID wattage equivalents will depend on things like environmental and application characteristics, distribution type and design criteria. 2. Considered initial nominal value of the LED light engine as specified by the LED chip manufacturer. Fixture efficacy and lumen output will depend on things like color temperature, distribution type and environmental characteristics. 3. Considered the typical initial delivered lumens of the LED light engine. Specific lumens for an application will depend on things like color temperature, distribution type and environmental characteristics. 4. Lumen maintenance values at 25 ℃ are calculated per TM-21 based on LM-80 data and in-house luminaire testing. 5. In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing (DUT) i.e. the packaged LED chip. 6. In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing (DUT) i.e. the packaged LED chip. Note: Additional wattages and configurations available upon request. Specifications are subject to change without notice. LE 800-558-4810 [email protected] NAFCOInternational.com HOURS p GY ideU C H N OL O TE 206 W. McWilliams St. Fond du Lac, WI 54935 300,000+ ENGINE nnyS Intertek LED LIFE 50-80% ENERGY SAVINGS Engineered & Manufactured In The USA D #Su Rev. V04172017 This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice. Ex. 48-LBHC-80-50-MV-5-WH-CG1 Ordering Information Designation Color Temp. 48-LBHC = 48” Low Bay COB 50 = 5000K Distribution Type 5 = Type V Round 40 = 4000K CD = Custom Color Accessories Controls WH = White CC = Custom Color SPC1 = Swivel Photocontrol, 120 VAC SPC2 = Swivel Photocontrol, 208 to 277 VAC 30 = 3000K SPC3 = Swivel Photocontrol, 480 VAC CT = Custom WSPAEMUNV360 = WASP Controls, 120/277/347v, End Mount, 360 Degree Lens* WSPAEM208360 = WASP Controls, 208/240v, End Mount, 360 Degree Lens* Wattage Input Voltage 50 = 50 Watt MV = 100-277v SRG1 = Surge Protector, 120v - 277v 80 = 80 Watt HV = 347-480v SRG4 = Surge Protector, 347v - 480v Other CV = Custom WHP10NP = 10’ Cord w/o Plug, Stripped Pigtail Both Ends (Not Installed) WHP6NP = 6’ Cord w/o Plug, Stripped Pigtail Both Ends (Not Installed) WHP10120P = 10’ Cord w/ NEMA 5-15P, Stripped Pigtail One End (Not Installed) WHP6120P = 6’ Cord w/ NEMA 5-15P, Stripped Pigtail One End (Not Installed) YT15 = 15' Universal Yoke and Toggle Suspension Kit (Not Installed) CG1 = 1/2” NPT Cord Grip, 0.180-0.400” Cord OD Range (Not Installed) Mounting Accessories Stainless Steel Strap Bracket (Standard) * Many lens options available, contact us for more options LE TE 800-558-4810 [email protected] NAFCOInternational.com HOURS p ideU nyS 206 W. McWilliams St. Fond du Lac, WI 54935 300,000+ ENGINE C H N OL Intertek LED LIFE 50-80% ENERGY SAVINGS Engineered & Manufactured In The USA D n #Su GY (YT-15 Optional) O 15' Universal Yoke and Toggle Suspension Kit Rev. V04172017 This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice.