Preview only show first 10 pages with watermark. For full document please download

48dc24-140 Dc To Dc Converter

   EMBED

Share

Transcript

48DC24-140 DC TO DC CONVERTER The 48DC24-140 supports 48V Lithium-Ion upgrades in a 24V infrastructure. Other combinations of voltages are also available. The 48DC24-140 Features: Local status LED provides converter troubleshooting information at a glance Low battery protection automatically shuts down converter at 40.0 VDC with inrush delay High surge rating for large motor loads Rugged design for RV/Mobile environments Optional LCD remote display Thermally controlled cooling fan Provides automatic electronic short circuit/overload protection, and automatic over-temperature shutdown Wide operating temperature range Provides parallel and/or redundant operation for up to three units Other voltage and current ratings available, contact factory for more information 48DC24-140 CONVERTER SPECIFICATIONS Input battery voltage range Surge voltage Maximum output voltage Nominal output voltage Idle current (typical) Continuous output power Output current (nominal) Input current Peak power (typical) Peak output current (typical) Efficiency 40.0- 50.0 VDC, 46VDC Nominal Up to 60 VDC 28.8 VDC 25.2 VDC Up to 900 mADC 3600 Watts @ 25°C 140 ADC Up to 90 ADC 7200 Watts 280 ADC 90% at 100% of rated load Operating temperature Input/Output terminals Dimensions (l x w x h) Weight Limited warranty -20° C to +65° C (-4° F to 149° F) Terminal pads for 3/8" ring lugs 13.8” x 17.1” x 8.0” (35.1cm x 43.4c 20.3cm) 68 lb (30.8 kg) Three years MAGNUM-DIMENSIONS 2211 West Casino Road Everett, Washington 98204 USA 425-353-8833 4467 White Bear Pkwy St. Paul, MN 55110 USA The World Depends on Sensors and Controls 855-633-7257 Testing for specifications at 25° C., and 46Vdc measured at the converter input terminals. Specifications subject to change without notice. www.magnum-dimensions.com July 2015 Rev 3 Part #131428