Transcript
Rev: 2012/10/29
49 Vertical or Horizontal Wall Mount
Accent Light Vanity
INDOOR
Imagine the Possibilities Entryway Elevator Lobby
Features
WALL
5 year product warranty Sleek profile Diffuser is 1/8" thick clear acrylic with matte finish Low energy, long life LED source Integral high power factor electronic power supply included (CB5206, CB5208, CB5210) PSX model - use with PS24 Series of 24VDC Class II remote power supplies. Each PS24 can power multiple fixtures (see total wattage table) and is available with 0-10V analog, Lutron EcoSystem, or DMX-compliant options. System costs are reduced by distributing the PS24 over multiple fixtures; and low-voltage Class II wiring between the PS24 and connected fixtures simplifies installation. The PS24 is not included with fixtures; order seperately - see Accessories section. Optional 0V-10V LED dimming with remote power supply Horizontal or vertical mounting Surface mount or semi-recessed (mud required for semi-recessed models; mud frame included) Recessed backbox is available for pre-shipment for rough-in installation ETL listed to UL standards (US and Canada) for indoor damp locations. Not recommended for exterior applications
LED Features
XPS
ADA
Static color (neutral white or warm white) Modular design allowing replacement of the LED linear source and power supply Constant current LED technology to protect LEDs from experiencing "over current" conditions that can cause overheating and premature failure Thermally managed within manufacturer specifications to promote long LED life No ultraviolet or infrared, alleviating potential damage to art, fabric and materials Mercury free LED source reduces impact to waste stream
Suggested Variations
NEW
LED
Custom color or material
Mounting Detail Recessed Mount
120V through 277V input 120V through 277V 120V through input 277V Integral input Power Supply Integral in recessed backbox Integral Power Supply Power Supply in recessed backbox in recessed backbox
Wall front
120V or 277V input
Wall front Wall front
Sequence Vanish C O M P A N I O N S Pendant Page 250
Recessed Mount - Low Voltage
120V or 277V input Remote 120V or 277V input Power Supply Remote Remote Power Supply 24VDC output Power Supply 24VDC output output Wall front Additional24VDC units may be attached up to maximum rated wattage Wall front Additional units may be Additional may be rated wattage Wall front attached upunits to maximum attached up to maximum rated wattage 120V or 277V input
Tile Trim Flange Detail (TTF Option)
Wall
Tile (1/4” minimum thickness)
Surface Mount
120V or 277V input Remote 120V or 277V input Power Supply Remote Remote Power Supply 24VDC output Power Supply 24VDC output Wall front output Additional24VDC units may be attached up to maximum rated wattage Wall front Additional units may be Wall front Additional may be rated wattage attached upunits to maximum attached up to maximum rated wattage
800-788-VISA www.visalighting.com
Recessed Housing
2-1/4” (56mm)
Decorative Tile Flange
Sequence
Pendant
Page 266
Rev: 2013/08/01
48 Order Code Example
Color Code Required for Painted Finishes
CB5212PSX
- LNW1100 (24VDC) -
Model Number
Source (Voltage) Nominal Source Lumens
Round Tube Diffuser
LNW1100 (MVOLT) LWW1100 (MVOLT)
23" Width
CB5206
LNW1600 (MVOLT) LWW1600 (MVOLT)
34" Width
CB5208
LNW2600 (MVOLT) LWW2600 (MVOLT)
56" Width
CB5210 23" Width
CB5206PSX Recessed Mount Low Voltage
TM
SEQUENCE Vanish
Recessed Mount with Integral Power Supply
34" Width
Power Supply is not included. Order separately (see Accessories Section below)
CB5208PSX 56" Width
CB5210PSX 23" Width
CB5212PSX Surface Mount Low Voltage
34" Width
Power Supply is not included. Order separately (see Accessories Section below)
CB5214PSX 56" Width
CB5218PSX
LNW1100 (24VDC) LWW1100 (24VDC) LNW1600 (24VDC) LWW1600 (24VDC) LNW2600 (24VDC) LWW2600 (24VDC) LNW1100 (24VDC) LWW1100 (24VDC) LNW1600 (24VDC) LWW1600 (24VDC) LNW2600 (24VDC) LWW2600 (24VDC)
BA
-
Diffuser Retainer
(Painted) BA BCA CB SN SNA
(Painted) BA BCA • CB • SN SNA
- TW9016
- DCC
Painted is Standard All others are Premium
Finishes
Housing
Dimensions
DCC RB TTF(Painted)
Diffuser is clear acrylic with matte finish
(Painted)
Diffuser is clear acrylic with matte finish
(Painted)
(Painted) BA BCA • CB • SN SNA
Options
Surface Backbox
(Painted)
Diffuser is clear acrylic with matte finish
DCC • MRI RB TTF(Painted) XPS
DCC JBC • MRI XPS
W H D
22-3/4" 4" 4-5/8"
(578 mm) (102 mm) (117 mm)
RW 23-3/8" RH 1-7/8" RD 3-1/4"
(594 mm) (48 mm) (83 mm)
W H D
33-3/4" 4" 4-5/8"
(857 mm) (102 mm) (117 mm)
RW 34-3/8" RH 1-7/8" RD 3-1/4"
(873 mm) (48 mm) (83 mm)
W H D
55-3/4" (1416 mm) 4" (102 mm) 4-5/8" (117 mm)
RW 56-3/8" (1432 mm) RH 1-7/8" (48 mm) RD 3-1/4" (83 mm)
W H D
22-3/4" 4" 4-5/8"
(578 mm) (102 mm) (117 mm)
RW 23-3/8" RH 1-7/8" RD 3-1/4"
(594 mm) (48 mm) (83 mm)
W H D
33-3/4" 4" 4-5/8"
(857 mm) (102 mm) (117 mm)
RW 34-3/8" RH 1-7/8" RD 3-1/4"
(873 mm) (48 mm) (83 mm)
W H D
55-3/4" (1416 mm) 4" (102 mm) 4-5/8" (117 mm)
W H D
22-3/4" 4" 6"
(578 mm) (102 mm) (152 mm)
W H D
33-3/4" 4" 6"
(857 mm) (102 mm) (152 mm)
W H D
55-3/4" (1416 mm) 4" (102 mm) 6" (152 mm)
RW 56-3/8" (1432 mm) RH 1-7/8" (48 mm) RD 3-1/4" (83 mm)
Accessories - Order Separately (see Technical Reference Section for additional details) Power Supply for PSX models (order separately) PS-24VDC90W01 24VDC 90 watt power supply
Input Voltage Specify 120V or 277V
75' maximum remote distance using 16 AWG wire, 20' maximum distance with DIM10 option
PS-24VDC40W01
24VDC 40 watt power supply
Specify 120V or 277V
75' maximum remote distance using 16 AWG wire, 20' maximum distance with DIM10 or DIM(EB) option
Line Drawings Depth is measured from wall to front of fixture W = Width H = Height RW = Recessed Width RH = Recessed Height
Diffuser (4" outside diameter)
Recessed Mount RW
H
D = Depth RD = Recessed Depth
Recessed Backbox
Housing Diffuser Retainer
RH Mud Frame
W
D
Surface Mount Surface Backbox
RD Diffuser Retainer
Diffuser (4" outside diameter)
D Junction Box Cover Surface Backbox
Diffuser (4" outside diameter)
Diffuser Retainer
CB5206PSX / CB5212PSX CB5208PSX / CB5214PSX CB5210PSX / CB5218PSX
• DIM10 • DIM(EB) XPS
LNW LWW Finishes (Painted) BA BCA • CB • SN SNA
• DIM(EB) • DIM10 JBC
Photometrics and 3D Modeling
(MVOLT; 24VDC) (MVOLT; 24VDC)
Color Code Required - see color chart Brushed Aluminum Brushed Chrome Alternative Polished Chrome Satin Nickel Satin Nickel Alternative
LER 26 26 26
Report 27041 27041 27041
LTL 27041 Source: 12 white LEDs (3447K, CRI 80.4), 24W Candela Distribution Angle 0.0° 0 57 25 64 45 80 70 99 90 109 115 100 135 81 160 63 180 56
180˚
150˚
120˚
90˚
60˚ 0˚
30˚
Nominal LED Source Wattage
CB5206 / CB5206PSX / CB5212PSX CB5208 / CB5208PSX / CB5214PSX CB5210 / CB5210PSX / CB5218PSX
LWW
Damp clear coat for metal finishes (required for 5 year warranty when used in damp locations) Lutron Hi-Lume A-Series EcoSystem digital dimming driver LED 0-10V dimming driver Junction box cover (5" square) for use with an existing 4" junction box. Painted to match surface backbox finish Non-ferrous materials for use in MRI room, not available with dimming Pre-ship recessed backbox Tile trim flange; Color Code Required - see color chart Express 10 day shipment
IES File Number CB5206-LNW1100 CB5206PSX-LNW1100 CB5212PSX-LNW1100
LNW
RB TTF(Painted) XPS
Neutral White, 3500K, LED Warm White , 3000K, LED
Max. units per Max. units per 40w power supply 90w power supply 1 3 1 2 1
Complete BIM, Google Sketchup, and Photometric files for these models can be downloaded from www.visalighting.com
Specify Voltage or MVOLT MVOLT fixture accepts 120 through 277 input voltage
• MRI D
Maximum PSX models per Power Supply
Abbreviation Key • Indicated Finish or Option is not available with XPS Source (voltage)
Options DCC Surface Mount with JBC Option
Options • DIM10 XPS
24 36 60
24 36 60
CB5212PSX-LEDNWT
Door Height = 7' Ceiling Height = 9' Silhouette Height = 6'
A Program of the U.S. DOE
Lighting Facts label available online at www.visalighting.com/lightingfacts
800-788-VISA www.visalighting.com
