Transcript
200LVC Series Volume Control Attenuators - 200 Watts Quality Features • • • • •
200W power rating. ETL Listed 2-gang stainless steel, black Decora® or rackmount styling Fits standard 2.5”D E.O. boxes (see chart on page 2) May be used with RMP Series rack panels (order separately).
Description Lowell’s 200LVC Series volume controls with 200 watt power rating provide precise level adjustment of single or multiple speaker lines. The ETL Listed, 2-gang devices are available with onepiece stainless steel plate, black Decora®-style subplate or as a rackmount unit with an adhesive dial and PocketID label window. Controls feature phoenix-style easy to connect, plug-in screw termination strips for pre-wire convenience. Controls have a wire capacity up to 14-gauge. Attenuation is 3dB per step per step with two positions of 6dB prior to OFF as noted.
200LVC Series
Model 200LVC is a 2-gang stainless steel assembly that mounts within a 2-gang E.O.Box with a minimum depth requirement of 2.5" including mud ring (if used). This model is ideal for applications where a powerful and durable, non-corrosive wall plate mounted control is specified. Model 200LVC-RMDB is a rackmount assembly with a decorastyle subplate. It is designed for installation into Lowell’s LD8-RMP or LD9-RMP rackmount device panels with pre-punched decorastyle cutouts. Due to the assembly’s 2.25” width two units may NOT be installed side by side in either panel. They may be installed in every other position with a device 1.625”W between for the LD8-RMP or 1.375”W on the LD9-RMP.
200LVC 2-gang control on a stainless steel plate
Model 200LVC-RM is a traditional rackmount assembly that includes the control unit with exposed shaft, knob and adhesive dial scale. It is designed for custom panel applications or for installation in Lowell’s LVC-RMP rackmount panel. Due to the assembly’s 2.25” width two units may NOT be installed side by side in the LVC-RMP panel. They may be installed in every other position with a device 1.625”W between. Accessory Rackmount Panels (order separately) Lowell offers three different RMP Series pre-punched rack panels for easy installation of multiple LVC Series controls on to a rack panel. All include a rear lacing flange for wire management and a clear PocketIDTM window for inserting 1/2" labels for control identification.
200LVC-RMDB Rackmount control with Decora®-style black subplate
A & E Specifications Volume control shall be Lowell Model _____ with a power rating of 200W and attenuation of 3dB per step with two 6dB positions before OFF. The control shall have plug-in termination for up to 14 gauge wire for 70V or 100V input connections from the amplifier and 70V or 100V output to the speaker/transformer assemblies. Plate style shall be ETL Listed model __________(2-gang stainless steel, Rackmount with Decora®-style black subplate, or rackmount with exposed shaft, knob and adhesive dialscale). Two gang stainless steel plate Model 200LVC shall mount in a standard 2gang E.O. Box (by others) with a minimum depth of 2.5” including mud ring (if used). Rackmount decora-style Model 200LVC-RMDB shall mount in LD8-RMP or LD9-RMP as noted (order separately). Traditional rackmount Model 200LVC-RM shall mount in LVC-RMP as noted (order separately) or in custom panel applications.
4a-108 pg 1 of 2
(Rev. 09.02.10)
200LVC-RM Rackmount control with exposed shaft and adhesive dial scale
Lowell Manufacturing Company • 100 Integram Drive • Pacific, Missouri 63069 U.S.A. Call 800.325.9660, 636.257.3400 • Fax 636.257.6606 • Click www.lowellmfg.com
Lowell makes every effort to provide accurate information and reserves the right to change specifications and/or improve manufacturing methods.
200LVC Series Volume Control Attenuators - 200 Watts Model
Power Type Rating
200LVC 200LVC-RMDB 200LVC-RM
200W 200W 200W
Switch Type
Auto-trans Rotary Auto-trans Rotary Auto-trans Rotary
Switch Attenuation Positions Step / Total
Style
10-off 10-off 10-off
2-gang Stainless steel 2-gang 2.5”D box (by others) Rackmount with decora subplate LD8-RMP or LD9-RMP (order separately) Rackmount with adhesive dialscale LVC-RMP (order separately) or custom
3dB / 33dB* 3dB / 33dB* 3dB / 33dB*
Mounts
* Models have two steps of 6dB each before off.
Accessory rackmount device panels with PocketIDTM Clear PocketID label window.
LD8-RMP (3RU)
Accessory Rackmount Panels (order separately) Lowell offers three different RMP Series pre-punched rack panels for easy installation of multiple LVC Series controls on to a rack panel. All include a rear lacing flange for wire management and a clear PocketIDTM window for inserting 1/2" labels for control identification. Model LD8-RMP will mount up to 4 Model 200LVC-RMDB controls if mounted in every other position. This allows 1.625” of space between controls for mounting ‘other’ narrower Decora-style devices.
LD9-RMP (3RU)
Model LD9-RMP will mount up to 5 Model 200LVC-RMDB controls if mounted in every other position. This allows 1.375” of space between controls for mounting ‘other’ narrower Decora-style devices.
LVC-RMP (2RU)
Model LVC-RMP will mount up to 4 Model 200LVC-RM controls if mounted in every other position. This allows 1.625” of space between controls for mounting ‘other’ narrower Decorastyle devices. Note, the adhesive dial scale is discarded when mounted in the LVC-RMP.
Lowell Manufacturing Company • 100 Integram Drive • Pacific, Missouri 63069 U.S.A. Call 800.325.9660, 636.257.3400 • Fax 636.257.6606 • Click www.lowellmfg.com
Lowell makes every effort to provide accurate information and reserves the right to change specifications and/or improve manufacturing methods.
4a-108
pg 2 of 2
